Experiments on granular flows to predict avalanche runup

1995 ◽  
Vol 32 (2) ◽  
pp. 285-295 ◽  
Author(s):  
T. Chu ◽  
G. Hill ◽  
D.M. McClung ◽  
R. Ngun ◽  
R. Sherkat
Keyword(s):  
Experimental Data ◽  
Key Words ◽  
Traditional Method ◽  
Granular Flows ◽  
Leading Edge ◽  
Experimental Results ◽  
Centre Of Mass ◽  
One Dimensional ◽  
Run Up ◽  
Runup Height

Design of deflectors or barriers to slow or stop snow avalanche debris in the runout zone requires estimates of runup height. In this paper, experimental data on runup of dense, dry granular flows in a flume are presented. The data are then compared with two one-dimensional theoretical equations for runup estimation: (1) a formulation based on following the leading edge of the flow up the barrier and (2) the traditional method adapted from equations presented by A. Voellmy for describing the centre of mass of the avalanche. The results show that the leading-edge model more closely matches the experimental results and, in field applications, the leading-edge model is expected to provide higher and, therefore, more conservative runup estimates. Key words : avalanche run-up, granular flows, avalanche defences, runout zone.

scholarly journals Simulations of dense-snow avalanches on deflecting dams

1998 ◽  
Vol 26 ◽  
pp. 265-271 ◽  
Author(s):  
Fridtjov Irgens ◽  
Bonsak Schieldrop ◽  
Carl B. Harbitz ◽  
Ulrik Domaas ◽  
Runar Opsahl
Keyword(s):  
Three Dimensional ◽  
Angle Of Incidence ◽  
Snow Avalanches ◽  
Centre Of Mass ◽  
Lumped Mass ◽  
Mass Model ◽  
One Dimensional ◽  
Lumped Mass Model ◽  
Flowing Material ◽  
Run Up

Two models simulating snow avalanches impacting retaining dams at oblique angles of incidence are presented.First, a lumped-mass model applying the Voellmy-Perla equation is used to calculate the path of the centre-of-mass along the side of a retaining dam.Secondly, a one-dimensional continuum model, applying depth-integrated equations of balance of mass and linear momentum, is expanded to take into account that real avalanche flows are three-dimensional. The centre-line of the avalanche path is determined by the flowing material as it progresses down the channelized avalanche path. The nonlinear constitutive equations comprise viscosity, visco-elasticity and plasticity.Both models are calibrated by simulations of a registered avalanche following a strongly curved channel. The path and the run-up height of the avalanche on the natural deflecting dam with oblique angle of incidence as calculated by the two models, are compared with the observations made.

scholarly journals Simulations of dense-snow avalanches on deflecting dams

1998 ◽  
Vol 26 ◽  
pp. 265-271
Author(s):  
Fridtjov Irgens ◽  
Bonsak Schieldrop ◽  
Carl B. Harbitz ◽  
Ulrik Domaas ◽  
Runar Opsahl
Keyword(s):  
Three Dimensional ◽  
Angle Of Incidence ◽  
Snow Avalanches ◽  
Centre Of Mass ◽  
Lumped Mass ◽  
Mass Model ◽  
One Dimensional ◽  
Lumped Mass Model ◽  
Flowing Material ◽  
Run Up

Two models simulating snow avalanches impacting retaining dams at oblique angles of incidence are presented.First, a lumped-mass model applying the Voellmy-Perla equation is used to calculate the path of the centre-of-mass along the side of a retaining dam.Secondly, a one-dimensional continuum model, applying depth-integrated equations of balance of mass and linear momentum, is expanded to take into account that real avalanche flows are three-dimensional. The centre-line of the avalanche path is determined by the flowing material as it progresses down the channelized avalanche path. The nonlinear constitutive equations comprise viscosity, visco-elasticity and plasticity.Both models are calibrated by simulations of a registered avalanche following a strongly curved channel. The path and the run-up height of the avalanche on the natural deflecting dam with oblique angle of incidence as calculated by the two models, are compared with the observations made.

Oblique weir equation using incomplete self-similarity

2006 ◽  
Vol 33 (10) ◽  
pp. 1241-1250 ◽  
Author(s):  
S M Borghei ◽  
A R Kabiri-Samani ◽  
N Nekoee
Keyword(s):  
Experimental Data ◽  
Data Analysis ◽  
Theoretical Analysis ◽  
Computer Program ◽  
Key Words ◽  
Dimensional Analysis ◽  
Flow Characteristics ◽  
Experimental Results ◽  
Trial And Error ◽  
Self Similarity

Incomplete self-similarity (ISS) concept is employed to develop the equations from existing experimental results of flow over an oblique rectangular sharp-crested weir for both free and submerged flow. The stage-discharge relationship is obtained by theoretical analysis, based on the application of the dimensional analysis and the ISS theory. For analysis, the relations were found by trial and error procedure using the SPSS mathematical computer program that estimates the relation among multi-variable functions. Thus, equations to estimate the flow characteristics for both free and submerged flow are proposed. The results show a better compatibility with the experimental data than the previous equations given by the main author. Hence, the capabilities of ISS method for similar analysis and the powerful program of SPSS for multi-variable data analysis is shown. Finally, design guides together with examples are presented to show the simple use of the graphs obtained . Key words: dimensional analysis, incomplete self-similarity (ISS), oblique weir, experimental data.

One-Dimensional Contact Pressure Distribution of Radial Tires in Motion

1995 ◽  
Vol 23 (2) ◽  
pp. 116-135 ◽  
Author(s):  
H. Shiobara ◽  
T. Akasaka ◽  
S. Kagami ◽  
S. Tsutsumi
Keyword(s):  
Pressure Distribution ◽  
Contact Pressure ◽  
Experimental Studies ◽  
Rolling Resistance ◽  
Leading Edge ◽  
Forward Direction ◽  
Contact Pressure Distribution ◽  
Support Ring ◽  
One Dimensional ◽  
Lowered Pressure

Abstract The contact pressure distribution and the rolling resistance of a running radial tire under load are fundamental properties of the tire construction, important to the steering performance of automobiles, as is well known. Many theoretical and experimental studies have been previously published on these tire properties. However, the relationships between tire performances in service and tire structural properties have not been clarified sufficiently due to analytical and experimental difficulties. In this paper, establishing a spring support ring model made of a composite belt ring and a Voigt type viscoelastic spring system of the sidewall and the tread rubber, we analyze the one-dimensional contact pressure distribution of a running tire at speeds of up to 60 km/h. The predicted distribution of the contact pressure under appropriate values of damping coefficients of rubber is shown to be in good agreement with experimental results. It is confirmed by this study that increasing velocity causes the pressure to rise at the leading edge of the contact patch, accompanied by the lowered pressure at the trailing edge, and further a slight movement of the contact area in the forward direction.

PHOTOINDUCED NONLINEAR OCTUPOLAR POLARIZATION: TRANSIENT AND PERMANENT REGIMES

1996 ◽  
Vol 05 (04) ◽  
pp. 653-670 ◽  
Author(s):  
CÉLINE FIORINI ◽  
JEAN-MICHEL NUNZI ◽  
FABRICE CHARRA ◽  
IFOR D.W. SAMUEL ◽  
JOSEPH ZYSS
Keyword(s):  
Theoretical Analysis ◽  
Second Harmonic ◽  
Experimental Results ◽  
Polar Field ◽  
Rotational Spectrum ◽  
Dual Frequency ◽  
One Dimensional ◽  
Ethyl Violet ◽  
Disperse Red 1 ◽  
Good Agreement

An original poling method using purely optical means and based on a dual-frequency interference process is presented. We show that the coherent superposition of two beams at fundamental and second-harmonic frequencies results in a polar field with an irreducible rotational spectrum containing both a vector and an octupolar component. This enables the method to be applied even to molecules without a permanent dipole such as octupolar molecules. After a theoretical analysis of the process, we describe different experiments aiming at light-induced noncentrosymmetry performed respectively on one-dimensional Disperse Red 1 and octupolar Ethyl Violet molecules. Macroscopic octupolar patterning of the induced order is demonstrated in both transient and permanent regimes. Experimental results show good agreement with theory.

scholarly journals Quantitative Experimental and Theoretical Investigations on the Interaction of Shock Waves with Magnetic Fields

1969 ◽  
Vol 24 (10) ◽  
pp. 1449-1457
Author(s):  
H. Klingenberg ◽  
F. Sardei ◽  
W. Zimmermann
Keyword(s):  
Magnetic Fields ◽  
Shock Waves ◽  
Physical Model ◽  
Spectroscopic Method ◽  
Experimental Results ◽  
Dimensional Theory ◽  
One Dimensional ◽  
Theoretical Investigations ◽  
Theoretical Predictions ◽  
Interaction Of Shock Waves

Abstract In continuation of the work on interaction between shock waves and magnetic fields 1,2 the experiments reported here measured the atomic and electron densities in the interaction region by means of an interferometric and a spectroscopic method. The transient atomic density was also calculated using a one-dimensional theory based on the work of Johnson3 , but modified to give an improved physical model. The experimental results were compared with the theoretical predictions.

Convective Losses From Cavity Solar Receivers—Comparisons Between Analytical Predictions and Experimental Results

1983 ◽  
Vol 105 (1) ◽  
pp. 29-33 ◽  
Author(s):  
A. M. Clausing
Keyword(s):  
Experimental Data ◽  
Experimental Evidence ◽  
Analytical Model ◽  
Excellent Agreement ◽  
Experimental Results ◽  
Simple Analytical Model ◽  
Refined Model ◽  
Wall Area

Cavity solar receivers are generally believed to have higher thermal efficiencies than external receivers due to reduced losses. A simple analytical model was presented by the author which indicated that the ability to heat the air inside the cavity often controls the convective loss from cavity receivers. Thus, if the receiver contains a large amount of inactive hot wall area, it can experience a large convective loss. Excellent experimental data from a variety of cavity configurations and orientations have recently become available. These data provided a means of testing and refining the analytical model. In this manuscript, a brief description of the refined model is presented. Emphasis is placed on using available experimental evidence to substantiate the hypothesized mechanisms and assumptions. Detailed comparisons are given between analytical predictions and experimental results. Excellent agreement is obtained, and the important mechanisms are more clearly delineated.

A Technique for the Laboratory Determination of Recirculation in Single Needle Dialysis

1993 ◽  
Vol 16 (2) ◽  
pp. 63-70 ◽  
Author(s):  
N.A. Hoenich ◽  
P.T. Smirthwaite ◽  
C. Woffindin ◽  
P. Lancaster ◽  
T.H. Frost ◽  
...  
Keyword(s):  
Experimental Data ◽  
Flow Rate ◽  
Experimental Results ◽  
New Technique ◽  
Treatment Efficiency ◽  
Single Lumen ◽  
Theoretical Predictions ◽  
Lumen Catheter ◽  
A New Technique

Recirculation is an important factor in single needle dialysis and, if high, can compromise treatment efficiency. To provide information regarding recirculation characteristics of access devices used in single needle dialysis, we have developed a new technique to characterise recirculation and have used this to measure the recirculation of a Terumo 15G fistula needle and a VasCath SC2300 single lumen catheter. The experimentally obtained results agreed well with those established clinically (8.5 ± 2.4% and 18.4 ± 3.4%). The experimental results have also demonstrated a dependence on access type, pump speeds and fistula flow rate. A comparison of experimental data with theoretical predictions showed that the latter exceeded those measured with the largest contribution being due to the experimental fistula.

Validating Numerical CFD Simulations With Experimental Data for Turbulence Phenomena in Axial Flow Gas Turbine Diffusers

2009 ◽  
Author(s):  
Farrokh Zarifi-Rad ◽  
Hamid Vajihollahi ◽  
James O’Brien
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Axial Flow ◽  
Experimental Results ◽  
Scale Model ◽  
Data Set ◽  
Pressure Profiles ◽  
Scale Models ◽  
Inlet Conditions

Scale models give engineers an excellent understanding of the aerodynamic behavior behind their design; nevertheless, scale models are time consuming and expensive. Therefore computer simulations such as Computational Fluid Dynamics (CFD) are an excellent alternative to scale models. One must ask the question, how close are the CFD results to the actual fluid behavior of the scale model? In order to answer this question the engineering team investigated the performance of a large industrial Gas Turbine (GT) exhaust diffuser scale model with performance predicted by commercially available CFD software. The experimental results were obtained from a 1:12 scale model of a GT exhaust diffuser with a fixed row of blades to simulate the swirl generated by the last row of turbine blades five blade configurations. This work is to validate the effect of the turbulent inlet conditions on an axial diffuser, both on the experimental front and on the numerical analysis approach. The object of this work is to bring forward a better understanding of velocity and static pressure profiles along the gas turbine diffusers and to provide an accurate experimental data set to validate the CFD prediction. For the CFD aspect, ANSYS CFX software was chosen as the solver. Two different types of mesh (hexagonal and tetrahedral) will be compared to the experimental results. It is understood that hexagonal (HEX) meshes are more time consuming and more computationally demanding, they are less prone to mesh sensitivity and have the tendancy to converge at a faster rate than the tetrahedral (TET) mesh. It was found that the HEX mesh was able to generate more consistent results and had less error than TET mesh.

A Theoretical Analysis of CO2 Absorption in Sun Versus Shade Leaves

1978 ◽  
Vol 100 (1) ◽  
pp. 20-24 ◽  
Author(s):  
R. H. Rand
Keyword(s):  
Experimental Data ◽  
Quantitative Estimate ◽  
Geometric Model ◽  
Model Parameters ◽  
Co2 Absorption ◽  
Temperature Model ◽  
Spongy Mesophyll ◽  
One Dimensional ◽  
Mesophyll Tissue ◽  
Shade Leaves

A one-dimensional, steady-state, constant temperature model of diffusion and absorption of CO2 in the intercellular air spaces of a leaf is presented. The model includes two geometrically distinct regions of the leaf interior, corresponding to palisade and spongy mesophyll tissue, respectively. Sun, shade, and intermediate light leaves are modeled by varying the thicknesses of these two regions. Values of the geometric model parameters are obtained by comparing geometric properties of the model with experimental data of other investigators found from dissection of real leaves. The model provides a quantitative estimate of the extent to which the concentration of gaseous CO2 varies locally within the leaf interior.

Sign in / Sign up

Export Citation Format

Share Document