Dissolution and oxidation of mudstone under stress

1993 ◽  
Vol 30 (1) ◽  
pp. 60-70 ◽  
Author(s):  
Masahiro Chigira

Weathering of soft mudstone in nature, characterized by the presence of an oxidized zone and an underlying dissolved zone, was simulated in the laboratory in 15 °C water with a pH of 3–7 and dissolved oxygen contents of 4–16 mg/L under stresses up to 0.49 MPa for as long as 70 days. When the water is acid, hydrogen ions diffuse from the rock–water interface through the rock and attack acid-labile calcite in mudstone preferentially and easily at a well-defined dissolution front, leaving a dissolved zone behind the front. Density decreases, porosity increases, ultrasonic P-wave velocity decreases, and shear strength decreases in the dissolved zone. The dissolution front migrates toward unreacted rock, and the migration rate is controlled by the diffusion of hydrogen ions in the reacted dissolved zone, so the rate is influenced by the stress exerted on the rocks; the effective diffusivity becomes smaller when the rock is stressed. Oxygen also diffuses through the rock to a well-defined oxidation front and changes the rock color from greenish grey to pale brown by oxidation. Slight deterioration occurs with the color change and change in density, P-wave velocity, and porosity. Depletion of pyrite by oxidation and the complete color change take a long time in comparison with the slight color change. Chlorite seems to transform into smectite in acid and highly oxidizing conditions. Key words : mudstone, dissolution, oxidation, weathering.

2021 ◽  
Author(s):  
Dariusz Chlebowski ◽  
Zbigniew Burtan

AbstractA variety of geophysical methods and analytical modeling are applied to determine the rockburst hazard in Polish coal mines. In particularly unfavorable local conditions, seismic profiling, active/passive seismic tomography, as well as analytical state of stress calculating methods are recommended. They are helpful in verifying the reliability of rockburst hazard forecasts. In the article, the combined analysis of the state of stress determined by active seismic tomography and analytical modeling was conducted taking into account the relationship between the location of stress concentration zones and the level of rockburst hazard. A longwall panel in the coal seam 501 at a depth of ca.700 m in one of the hard coal mines operating in the Upper Silesian Coal Basin was a subject of the analysis. The seismic tomography was applied for the reconstruction of P-wave velocity fields. The analytical modeling was used to calculate the vertical stress states basing on classical solutions offered by rock mechanics. The variability of the P-wave velocity field and location of seismic anomaly in the coal seam in relation to the calculated vertical stress field arising in the mined coal seam served to assess of rockburst hazard. The applied methods partially proved their adequacy in practical applications, providing valuable information on the design and performance of mining operations.


2021 ◽  
pp. 228973
Author(s):  
Junhao Qu ◽  
Stephen S. Gao ◽  
Changzai Wang ◽  
Kelly H. Liu ◽  
Shaohui Zhou ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document