An energy approach for assessing seismic liquefaction potential

1990 ◽  
Vol 27 (3) ◽  
pp. 320-329 ◽  
Author(s):  
K. T. Law ◽  
Y. L. Cao ◽  
G. N. He

An energy method for assessing liquefaction potential of granular soils was developed based on laboratory tests and observational data obtained in past major earthquakes. Cyclic triaxial and cyclic simple shear tests were conducted and the results show that a unique relation exists between the dissipated energy during cyclic load and the excess pore pressure that eventually led to liquefaction failure. This unique relation has been combined with an energy attenuation equation to develop a criterion for defining the liquefaction potential of a site. Parameters for the criterion were evaluated from 136 sites involved in 13 major earthquakes over the world. A comparison was made between the energy method and the commonly used stress method. The energy method was found to be simpler to apply and more reliable. Key words: energy, earthquake, liquefaction potential, standard penetration test, laboratory cyclic test, excess pore pressure, granular soils, case records.

2007 ◽  
Vol 44 (1) ◽  
pp. 1-19 ◽  
Author(s):  
Dawn A Shuttle ◽  
John Cunning

Silt tailings (slimes) are difficult materials to test in that, like sands, it is extremely difficult to obtain undisturbed samples and subsequently re-establish them in a triaxial cell for element testing in a laboratory in anything approaching their in situ condition. Evaluation of silt tailing behaviour has to depend on in situ tests, and the piezocone (CPTu) in particular. However, CPTs in silt generate substantial excess pore pressure and there is no established methodology to evaluate the measured responses in terms of soil properties, as drained sand-based CPT interpretation is inapplicable. A case history of particularly loose silt tailings is reported in which the National Center for Earthquake Engineering Research (NCEER) liquefaction assessment method would lead to uncertainty in the liquefaction potential. However, the extremely high CPTu excess pore pressure ratio, Bq, and low dimensionless CPT resistance, Qp, at this site indicates liquefaction is likely occurring during pushing of the CPT. Detailed finite element simulations of the CPT using a critical state model provided an effective stress framework to evaluate the in situ state parameter of the silt from the measured CPT data. This framework shows that the group of dimensionless CPT variables Q(1 – Bq) + 1 is fundamental for the evaluation of undrained response during CPT sounding. And, despite the high silt content, the interpretation indicates that the tailings are indeed liquefiable.Key words: liquefaction, CPT, silt, finite element, critical state.


2012 ◽  
Vol 446-449 ◽  
pp. 1940-1943
Author(s):  
Yang Liu ◽  
Hong Xiang Yan

Numerical simulation of vibro-stone column is taken to simulate the installation of vibro-stone column. A relationship based on test is adopted to calculate the excess pore pressure induced by vibratory energy during the installation of vibro-stone column. A numerical procedure is developed based on the formula and Terzaghi-Renduric consolidation theory. Finally numerical results of composite stone column are compared single stone column.


2020 ◽  
Author(s):  
Davide Mencaroni ◽  
Roger Urgeles ◽  
Jonathan Ford ◽  
Jaume Llopart ◽  
Cristina Sànchez Serra ◽  
...  

<p>Contourite deposits are generated by the interplay between deepwater bottom-currents, sediment supply and seafloor topography. The Gulf of Cadiz, in the Southwest Iberian margin, is a famous example of extensive contourite deposition driven by the Mediterranean Outflow Water (MOW), which exits the Strait of Gibraltar, flows northward following the coastline and distributes the sediments coming from the Guadalquivir and Guadiana rivers. The MOW and related contourite deposits affect the stability of the SW Iberian margin in several ways: on one hand it increases the sedimentation rate, favoring the development of excess pore pressure, while on the other hand, by depositing sand it allows pore water pressure to dissipate, potentially increasing the stability of the slope.</p><p>In the Gulf of Cadiz, grain size distribution of contourite deposits is influenced by the seafloor morphology, which splits the MOW in different branches, and by the alternation of glacial and interglacial periods that affected the MOW hydrodynamic regimes. Fine clay packages alternates with clean sand formations according to the capacity of transport of the bottom-current in a specific area. Generally speaking, coarser deposits are found in the areas of higher MOW flow energy, such as in the shallower part of the slope or in the area closer to the Strait of Gibraltar, while at higher water depths the sedimentation shifts to progressively finer grain sizes as the MOW gets weaker. Previous works show that at present-day the MOW flows at a maximum depth of 1400 m, while during glacial periods the bottom-current could have reached higher depths.</p><p>In this study we derived the different maximum depths at which the MOW flowed by analyzing the distribution of sands at different depths along the Alentejo basin slope, in the Northern sector of the Gulf of Cadiz.</p><p>Here we show how changes in sand distribution along slope, within the stratigraphic units deposited between the Neogene and the present day, are driven by glacial – interglacial period alternation that influenced the hydrodynamic regime of the MOW.</p><p>By deriving the depositional history of sand in the Alentejo basin, we are able to correlate directly the influence that climatic cycles had on the MOW activity. Furthermore, by interpreting new multi-channel seismic profiles we have been able to derive a detailed facies characterization of the uppermost part of the Gulf of Cadiz.</p><p>An accurate definition of sand distribution along slope plays an important role in evaluating the stability of the slope itself, e.g. to understand if the sediments may be subjected to excess pore pressure generation. As sand distribution is a direct function of the bottom-current transport capacity, the ultimate goal of this study is to understand how climate variations can affect the stability of submarine slope by depositing contourite-related sand.</p>


Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Hung-Ming Lin ◽  
Jian-Hong Wu ◽  
Erik Sunarya

A new consolidated undrained ring shear test capable of measuring the pore pressures is presented to investigate the initiation mechanism of the Hsien-du-shan rock avalanche, triggered by Typhoon Morakot, in southern Taiwan. The postpeak state of the landslide surface between the Tangenshan sandstone and the remolded landslide gouge is discussed to address the unstable geomorphological precursors observed before the landslide occurred. Experimental results show that the internal friction angle of the high water content sliding surface in the total stress state, between 25.3 and 26.1°, clarifies the reason of the stable slope prior to Typhoon Morakot. In addition, during the ring shear tests, it is observed that the excess pore pressure is generated by the shear contractions of the sliding surface. The remolded landslide gouge, sheared under the high normal stress, rendered results associated with high shear strength, small shear contraction, low hydraulic conductivity, and continuous excess pore pressure. The excess pore pressure feedback at the sliding surface may have accelerated the landslide.


2018 ◽  
Vol 783 ◽  
pp. 46-50
Author(s):  
Yu Cong Gao ◽  
Rong Chen ◽  
Dong Xue Hao ◽  
Myoung Soo Won

Geosynthetics–reinforced structures are widely used in embankments and walls. This paper presents the simulation of the embankment under load in order to compare the behavior of clay embankment with and without wrapping-facing-geosynthetics-reinforcement using finite element method (FEM) and to analyse the variation of behavior included of displacement and excess pore pressure under the different over-consolidation ratios (OCR). The calculation results show that embankment with higher OCR showing lower displacement compare to embankment with lower OCR. However, OCR isn’t very sensitive to the dissipation of excess pore pressure. Geosynthetics-reinforcements could reduce the displacement of embankment and accelerate dissipation of excess pore pressure after construction and surcharge. Gravel, geosynthetics-reinforcement and clay soil are properly combined, clayey soil is expected to be useful as embankment material.


Sign in / Sign up

Export Citation Format

Share Document