Determination of horizontal geostatic stress in clay with self-bored pressuremeter

1988 ◽  
Vol 25 (3) ◽  
pp. 559-573 ◽  
Author(s):  
M. G. Jefferies
Keyword(s):  
Key Words ◽  
Image Matching ◽  
The Self ◽  
In Situ Tests ◽  
Extended Theory ◽  
Computer Aided ◽  
Modelling Procedure

The Gibson–Anderson theory for interpretation of pressuremeter data in clay is extended to include the unloading part of the test for the particular circumstances that prevail with a self-bored pressuremeter (SBP). Incorporation of the extended theory in a computer-aided modelling procedure allows horizontal geostatic stress to be unambiguously determined from SBP data by image matching irrespective of imperfections in the self-boring process. The procedure is illustrated by example on a previously reported test carried out in Beaufort Shelf clay. Key words: clay, in situ tests, self-bored pressuremeter, K0.

scholarly journals Laboratory and In Situ Determination of Hydraulic Conductivity and Their Validity in Transient Seepage Analysis

Water ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1131
Author(s):  
Soonkie Nam ◽  
Marte Gutierrez ◽  
Panayiotis Diplas ◽  
John Petrie
Keyword(s):  
Hydraulic Conductivity ◽  
Field Measurements ◽  
Natural Soil ◽  
In Situ Tests ◽  
Seepage Analysis ◽  
Soil Deposits ◽  
Seepage Modeling ◽  
Sample Disturbance

This paper critically compares the use of laboratory tests against in situ tests combined with numerical seepage modeling to determine the hydraulic conductivity of natural soil deposits. Laboratory determination of hydraulic conductivity used the constant head permeability and oedometer tests on undisturbed Shelby tube and block soil samples. The auger hole method and Guelph permeameter tests were performed in the field. Groundwater table elevations in natural soil deposits with different hydraulic conductivity values were predicted using finite element seepage modeling and compared with field measurements to assess the various test results. Hydraulic conductivity values obtained by the auger hole method provide predictions that best match the groundwater table’s observed location at the field site. This observation indicates that hydraulic conductivity determined by the in situ test represents the actual conditions in the field better than that determined in a laboratory setting. The differences between the laboratory and in situ hydraulic conductivity values can be attributed to factors such as sample disturbance, soil anisotropy, fissures and cracks, and soil structure in addition to the conceptual and procedural differences in testing methods and effects of sample size.

In situ estimation of the coefficient of consolidation in clays

1990 ◽  
Vol 27 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Mohammed G. Kabir ◽  
Alan J. Lutenegger
Keyword(s):  
Key Words ◽  
Pore Pressure ◽  
Reference Values ◽  
Time Factors ◽  
In Situ Tests ◽  
Coefficient Of Consolidation ◽  
Oedometer Test ◽  
Undisturbed Samples ◽  
Oedometer Tests

An investigation was conducted to demonstrate the applicability of cylindrical piezocone and flat piezoblade tests for providing reliable estimates of the coefficient of consolidation in clays. Coefficients of consolidation were calculated from piezocone dissipation tests for different degrees of consolidation using theoretical time factors to provide a comparison with laboratory oedometer tests. Three techniques were developed to calculate the coefficient of consolidation from piezoblade dissipation tests. Results from in situ pore pressure dissipation tests were compared with laboratory oedometer tests performed on undisturbed samples oriented in both the vertical and horizontal directions, to provide reference values of cv and ch. The results of investigations conducted at several clay sites are presented. Key words: in situ tests, piezocone, piezoblade, coefficient of consolidation, oedometer test, clays.

Independence of geostatic stress from overconsolidation in some Beaufort Sea clays

1987 ◽  
Vol 24 (3) ◽  
pp. 342-356 ◽  
Author(s):  
M. G. Jefferies ◽  
J. H. A. Crooks ◽  
D. E. Becker ◽  
P. R. Hill
Keyword(s):  
Key Words ◽  
Stress Ratio ◽  
Beaufort Sea ◽  
The Self ◽  
Geologic History ◽  
Overconsolidation Ratio ◽  
Site Investigations

Since 1982, extensive use has been made of the self-bored pressuremeter in Arctic offshore site investigations. One finding of this work is that the in situ geostatic stress ratio K0 of Beaufort Sea clays is apparently unrelated to the overconsolidation ratio (OCR). The procedures and data to support this finding are documented and the finding is discussed in light of the present geological understanding for the area. It is concluded that the independence of K0 from OCR may be quite widespread, a finding that contradicts the widely held tenet regarding the existence of a single-valued function relating K0, [Formula: see text], and OCR. If K0 is regarded as important, then it should be measured in situ. Key words: self-bored pressuremeter, geostatic stress ratio (K0), Beaufort Shelf, geologic history, overconsolidation ratio.

scholarly journals Neural networks and principle component analysis approaches to predict pile capacity in sand

2018 ◽  
Vol 149 ◽  
pp. 02025 ◽  
Author(s):  
A Benali ◽  
A Nechnech ◽  
B Boukhatem ◽  
M N Hussein ◽  
M Karry
Keyword(s):  
Neural Networks ◽  
Bearing Capacity ◽  
Driven Piles ◽  
In Situ Tests ◽  
Pile Capacity ◽  
Significant Development ◽  
Pca Method ◽  
Main Component

Determination of pile bearing capacity from the in-situ tests has developed considerably due to the significant development of their technology. The project presented in this paper is a combination of two approaches, artificial neural networks and main component analyses that allow the development of a neural network model that provides a more accurate prediction of axial load bearing capacity based on the SPT test data. The retropropagation multi-layer perceptron with Bayesian regularization (RB) was used in this model. This was established by the incorporation of about 260 data, obtained from the published literature, of experimental programs for large displacement driven piles. The PCA method is proposed for compression and suppression of the correlation between these data. This will improve the performance of generalization of the model.

scholarly journals PROPOSTA DE APLICAÇÃO DE RESULTADOS DE SONDAGENS COM MARTELO LEVE (DPL) NO CAMPO EXPERIMENTAL DA UNIFOR EM PROJETOS DE FUNDAÇÕES PARA PEQUENAS CARGAS [ Proposal for the Application of Dynamic Probing Light (DPL) Results in the Experimental Field of UNIFOR in Foundations Projects for Small Loads ]

2018 ◽  
Vol 14 (2) ◽  
Author(s):  
Marcos Fábio Porto de Aguiar ◽  
Fernando Feitosa Monteiro ◽  
Francisco Heber Lacerda de Oliveira ◽  
Yago Machado Pereira de Matos
Keyword(s):  
Bearing Capacity ◽  
Standard Penetration Test ◽  
Coefficient Of Determination ◽  
Deep Foundations ◽  
Penetration Test ◽  
In Situ Tests ◽  
Foundation Design ◽  
Experimental Field

RESUMO: Em meio aos diversos métodos utilizados no Brasil para determinação da capacidade de carga de fundações, a grande maioria parte do índice de resistência à penetração (NSPT). Para o caso de pequenas edificações, devido a fatores geralmente econômicos, a experiência ou a prática regional costumam prevalecer. Sendo assim, são elaborados, muitas vezes, projetos sem um procedimento de cálculo fundamentado em parâmetros comprovados por ensaios geotécnicos, podendo ocasionar problemas na edificação, como recalques excessivos, ou, até mesmo, comprometer a segurança da estrutura. Dessa forma, técnicas mais simples e de baixo custo, como o DPL (Dynamic Probing Light), podem ser uma opção para situações de pequenas cargas, viabilizando projetos fundamentados em ensaios in situ. Partindo de investigações com o DPL, este trabalho tem o objetivo de dimensionar fundações superficiais e profundas para edificações de pequeno porte através de algumas das principais metodologias disponíveis na literatura e verificar a sua eficiência. Por meio de resultados de campanhas de sondagens SPT (Standard Penetration Test) e DPL no campo experimental da Universidade de Fortaleza (UNIFOR), determinou-se a capacidade de carga de fundações superficiais e profundas fazendo aplicação dos índices NSPT e NSPT equivalente obtido pela correlação com o DPL. Identificou-se que essa correlação apresentou coeficiente de determinação satisfatório entre os parâmetros obtidos nos ensaios SPT e DPL para o terreno em questão, mostrando-se o DPL ser uma alternativa pertinente, em termos técnicos para projetos de fundações de obras de pequeno porte.ABSTRACT: Among the various methods used in Brazil of the determination of the bearing capacity on foundations, most part uses the standard penetration resistance (NSPT). For small constructions, due to economic factors generally, experience or regional practice usually prevails. Thus, projects without a reasoned calculation procedure in parameters supported by geotechnical tests are often designed, and may cause problems in the building, as excessive settlements, or even compromise the safety of the structure. In this way, simple and low cost techniques such as DPL (Dynamic Probing Light) may be an option for small loads situations, enabling projects based on in situ tests. This paper proposes to calculate the dimensions of shallow and deep foundations for small constructions and check its efficiency using DPL tests. Through the results of SPT (Standard Penetration Test) and DPL tests in the experimental field of the University of Fortaleza (UNIFOR), the determination of the bearing capacity in shallow and deep foundations was done using NSPT index and equivalent NSPT index obtained by the correlation with DPL. A correlation with satisfactory coefficient of determination was obtained between SPT and DPL tests parameters for the analyzed field, showing up the DPL as an appropriate alternative in technical terms for foundation design of small constructions.

scholarly journals The analysis on the correlation parameters of the embankment compaction under in situ conditions

2013 ◽  
Vol 12 (3) ◽  
pp. 097-104
Author(s):  
Maciej Kumor ◽  
Łukasz Kumor ◽  
Joanna Farmas
Keyword(s):  
Particle Size ◽  
In Situ Tests ◽  
Geotechnical Assessment ◽  
In Situ Conditions ◽  
Wide Range ◽  
Correlation Parameters ◽  
And Control

Geotechnical assessment of the implementation correctness of a road embankment wide range of issues, among which important selection and control of the quality of the earthworks are extremely significant. The article presents results of in situ tests determining correlations between the depending parameters defined by a static plate – VSS test – E1 and E2, and obtained from the study LFG Dynamic Load Plate. Studies indicate that the determination of the correlation between the parameters characterizing the particle size distribution (Cc, Cu, D10, D20, D30, D60), and the compaction parameters obtained by examining the compaction of sand embankment (Evd, E1, E2, I0) is physically complex and hence extremely difficult. 

scholarly journals Improvement of Gas Drainage Efficiency via Optimization of Sealing Depth of Cross-Measure Boreholes

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Pu Li ◽  
Zhiheng Cheng ◽  
Liang Chen ◽  
Hongbing Wang ◽  
Jialin Cao
Keyword(s):  
Stress Concentration ◽  
Drainage System ◽  
Stress Concentration Zone ◽  
Concentration Zone ◽  
Air Leakage ◽  
In Situ Tests ◽  
Gas Drainage ◽  
Drainage Borehole

The sealing depth of a gas-drainage borehole is critically important as it directly affects the efficiency of the whole drainage system. In order to determine the shortest reasonable sealing depth, in this paper, a theoretical drainage model using different sealing depths was proposed. Based on theoretical analysis presented, two parts of the fractures system surrounding the drainage borehole were proposed, i.e. the fractures induced by roadway excavation and the fractures induced by borehole drilling. A series of geological in-situ tests and simulations research were conducted to determine the stress and fracture distributions in the surrounding rock of the borehole. The depths of crushing zones, plastic zones and stress concentration zones were determined as 5 m, 2 m and 12 m, respectively. Meanwhile, stress simulation shows that the depth of the stress concentration zone was 12 m from the roadway wall and the stress peak was located at the depth of 8 m, which can be verified by the results of drilling penetration velocity analysis. To determine the optimum sealing depth, gas drainage holes with different sealing depths were drilled in the field. The field results revealed that the crushing zones were the main area for air leakage, and the stress concentration induced by roadway excavation assisted in the reduction of air leakage. Therefore, the optimized sealing depth should both cover the plastic zone and the stress concentration zone. The research achievements can provide a quantitative method for the determination of optimum sealing depth in cross-measure drainage boreholes.

scholarly journals Hydrogeological Characterization of Coastal Aquifer on the Basis of Observed Sea Level and Groundwater Level Fluctuations: Neretva Valley Aquifer, Croatia

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 348
Author(s):  
Veljko Srzić ◽  
Ivan Lovrinović ◽  
Ivan Racetin ◽  
Fanito Pletikosić
Keyword(s):  
Sea Level ◽  
Data Availability ◽  
Problem Analysis ◽  
Clay Layer ◽  
In Situ Tests ◽  
Specific Storage ◽  
Hydrogeological Parameters ◽  
Area Of Interest

Hydrogeological data availability is often limited to local areas where usual in situ tests or methods are applied (slug/bail or pumping tests, Electrical Resistivity Tomography (ERT)). Because most problems (e.g., saltwater intrusion mitigation) require problem analysis on larger scales (catchment or sub catchment), hydrogeological identification of global character is preferable. This work leads to the determination of aquifer hydrogeological parameters on the basis of observed sea level, groundwater piezometric head found inland, and barometric pressure. When applied to observed signals, the approach led efficiently to final hydrogeological characterization. After identification of dominant tidal constituents from observed signals, barometric efficiency was successfully determined. Following available information on geological settings, an appropriate conceptual model was applied and updated to count for polychromatic signals. Final determination of hydrogeological parameters relied on root mean square error (RMSE) minimization and led to determination of (i) presence of three stratigraphic units: unconfined sandy aquifer on the top, a confining layer made of clay, and a confined gravel layer; (ii) existence of the clay layer under the sea with a total length of 1400 m; (iii) a clay layer has been identified as confining one by both spectral analysis and determined leakance value; and (iv) estimated confined aquifer specific storage ranging from 2.87 × 10−6 to 4.98 × 10−6 (m−1), whereas hydraulic conductivity ranged from 7.0 × 10−4 to 7.5 × 10−3 (m s−1). Both range intervals corresponded to previous in situ findings conducted within the area of interest.

Interpretation of field measurements for ice engineering applications

1996 ◽  
Vol 23 (1) ◽  
pp. 180-185
Author(s):  
Lorne W. Gold
Keyword(s):  
Mechanical Properties ◽  
Key Words ◽  
Mechanical Behaviour ◽  
Deformation Behaviour ◽  
Field Measurements ◽  
In Situ Testing ◽  
In Situ Tests ◽  
Engineering Applications ◽  
Inhomogeneous Bodies

A description is given of the nature of problems caused by ice for the engineer. Factors controlling the deformation behaviour and strength of ice are discussed briefly. A distinction is made between the behaviour of the relatively small volumes of competent ice that are normally used for tests and the large, inhomogeneous bodies that must be considered by the engineer. Consideration is given to the implications of this for the conduct of in situ tests and the interpretation of their results. Key words: ice, mechanical properties, mechanical behaviour, in situ testing, pressuremeter.

Sign in / Sign up

Export Citation Format

Share Document