Consolidation behaviour determined by the velocity method

1985 ◽  
Vol 22 (2) ◽  
pp. 158-165 ◽  
Author(s):  
Patrick T. W. Lun ◽  
Alan K. Parkin
Keyword(s):  
Salt Content ◽  
Settlement Rate ◽  
Load Increment ◽  
Enhanced Sensitivity ◽  
Different Temperatures ◽  
Water Salt ◽  
Effect Time ◽  
Oedometer Tests ◽  
Load Increment Ratio

The "velocity method," wherein settlement rate is plotted against time on double-log scales, has been used to analyse a series of stage load oedometer tests. Because of the greatly enhanced sensitivity of this form of analysis, the test programme has been designed to reexamine the effects of sample thickness, load increment duration, and load increment ratio. A comparison of Cv values by various methods is made, with the velocity method being used as reference because it is free from the two most important errors that affect other methods. A comparison is also made with other theoretical solutions to indicate the validity of using the simple Terzaghi solution curve.An examination of some aspects of secondary compression is made by means of tests on nonaqueous samples and on samples at different temperatures, and a further investigation is made on the effect of cell water salt content. All results point to a fairly unique final slope on the velocity diagram that is of particular significance for long-term predictions. Key words: clay, consolidation test, settlement rate, pore pressure, loading, temperature effect, time factor, creep.

Comparative Labelling and Biokinetic Studies of 99mTc-EDTA(Sn) and 99mTc-DTPA(Sn)

1977 ◽  
Vol 16 (01) ◽  
pp. 30-35 ◽  
Author(s):  
N. Agha ◽  
R. B. R. Persson
Keyword(s):  
Complex Formation ◽  
Significant Influence ◽  
Room Temperature ◽  
Ph Value ◽  
Maximum Activity ◽  
Reduction Step ◽  
Labelling Yield ◽  
Different Temperatures ◽  
Kinetics Of

SummaryGelchromatography column scanning has been used to study the fractions of 99mTc-pertechnetate, 99mTcchelate and reduced hydrolyzed 99mTc in preparations of 99mTc-EDTA(Sn) and 99mTc-DTPA(Sn). The labelling yield of 99mTc-EDTA(Sn) chelate was as high as 90—95% when 100 μmol EDTA · H4 and 0.5 (Amol SnCl2 was incubated with 10 ml 99mTceluate for 30—60 min at room temperature. The study of the influence of the pH-value on the fraction of 99mTc-EDTA shows that pH 2.8—2.9 gave the best labelling yield. In a comparative study of the labelling kinetics of 99mTc-EDTA(Sn) and 99mTc- DTPA(Sn) at different temperatures (7, 22 and 37°C), no significant influence on the reduction step was found. The rate constant for complex formation, however, increased more rapidly with increased temperature for 99mTc-DTPA(Sn). At room temperature only a few minutes was required to achieve a high labelling yield with 99mTc-DTPA(Sn) whereas about 60 min was required for 99mTc-EDTA(Sn). Comparative biokinetic studies in rabbits showed that the maximum activity in kidneys is achieved after 12 min with 99mTc-EDTA(Sn) but already after 6 min with 99mTc-DTPA(Sn). The long-term disappearance of 99mTc-DTPA(Sn) from the kidneys is about five times faster than that for 99mTc-EDTA(Sn).

Heat wave effects on biomass and vegetative growth of macrophytes after long-term adaptation to different temperatures: a mesocosm study

2015 ◽  
Vol 66 (3) ◽  
pp. 265-274 ◽  
Author(s):  
Y Cao ◽  
ÉM Neif ◽  
W Li ◽  
J Coppens ◽  
N Filiz ◽  
...  
Keyword(s):  
Heat Wave ◽  
Vegetative Growth ◽  
Wave Effects ◽  
Different Temperatures

scholarly journals Influence of Salt on the Self-Organization in Solutions of Star-Shaped Poly-2-alkyl-2-oxazoline and Poly-2-alkyl-2-oxazine on Heating

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1152
Author(s):  
Tatyana Kirila ◽  
Anna Smirnova ◽  
Alla Razina ◽  
Andrey Tenkovtsev ◽  
Alexander Filippov
Keyword(s):  
Phase Separation ◽  
Salt Concentration ◽  
Monomer Unit ◽  
Salt Content ◽  
The Self ◽  
Self Organization ◽  
Phase Separation Temperature ◽  
The Core ◽  
Separation Temperature ◽  
Water Salt

The water–salt solutions of star-shaped six-arm poly-2-alkyl-2-oxazines and poly-2-alkyl-2-oxazolines were studied by light scattering and turbidimetry. The core was hexaaza[26]orthoparacyclophane and the arms were poly-2-ethyl-2-oxazine, poly-2-isopropyl-2-oxazine, poly-2-ethyl-2-oxazoline, and poly-2-isopropyl-2-oxazoline. NaCl and N-methylpyridinium p-toluenesulfonate were used as salts. Their concentration varied from 0–0.154 M. On heating, a phase transition was observed in all studied solutions. It was found that the effect of salt on the thermosensitivity of the investigated stars depends on the structure of the salt and polymer and on the salt content in the solution. The phase separation temperature decreased with an increase in the hydrophobicity of the polymers, which is caused by both a growth of the side radical size and an elongation of the monomer unit. For NaCl solutions, the phase separation temperature monotonically decreased with growth of salt concentration. In solutions with methylpyridinium p-toluenesulfonate, the dependence of the phase separation temperature on the salt concentration was non-monotonic with minimum at salt concentration corresponding to one salt molecule per one arm of a polymer star. Poly-2-alkyl-2-oxazine and poly-2-alkyl-2-oxazoline stars with a hexaaza[26]orthoparacyclophane core are more sensitive to the presence of salt in solution than the similar stars with a calix[n]arene branching center.

scholarly journals Impact of Prolonged Exposure of Eleven Years to Hot Seawater on the Degradation of a Thermoset Composite

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2154
Author(s):  
Amir Hussain Idrisi ◽  
Abdel-Hamid I. Mourad ◽  
Muhammad M. Sherif
Keyword(s):  
Exposure Time ◽  
Prolonged Exposure ◽  
Mechanical Performance ◽  
Matrix Cracking ◽  
Pull Out ◽  
Strength Based ◽  
Different Temperatures ◽  
River Line ◽  
Composite Samples

This paper presents a long-term experimental investigation of E-glass/epoxy composites’ durability exposed to seawater at different temperatures. The thermoset composite samples were exposed to 23 °C, 45 °C and 65 °C seawater for a prolonged exposure time of 11 years. The mechanical performance as a function of exposure time was evaluated and a strength-based technique was used to assess the durability of the composites. The experimental results revealed that the tensile strength of E-glass/epoxy composite was reduced by 8.2%, 29.7%, and 54.4% after immersion in seawater for 11 years at 23 °C, 45 °C, and 65 °C, respectively. The prolonged immersion in seawater resulted in the plasticization and swelling in the composite. This accelerated the rate of debonding between the fibers and matrix. The failure analysis was conducted to investigate the failure mode of the samples. SEM micrographs illustrated a correlation between the fiber/matrix debonding, potholing, fiber pull-out, river line marks and matrix cracking with deterioration in the tensile characteristics of the thermoset composite.

Evaluation of long-term frozen storage of plasma for measurement of high-density lipoprotein and its subfractions by precipitation

1990 ◽  
Vol 36 (5) ◽  
pp. 783-788 ◽  
Author(s):  
M N Nanjee ◽  
N E Miller
Keyword(s):  
High Density Lipoprotein ◽  
Liquid Nitrogen ◽  
Frozen Storage ◽  
Density Lipoprotein ◽  
High Density ◽  
Long Term Stability ◽  
Long Term Storage ◽  
Different Temperatures ◽  
Edta Plasma

Abstract The concentration of high-density lipoprotein cholesterol (HDL-C) in plasma is now established as an independent risk factor for coronary heart disease, but more data are needed on the relative risk-predictive powers of different HDL subclasses. For epidemiologic and clinical purposes, isolation of HDL from other lipoproteins and separation of its two major subclasses, HDL2 and HDL3, are performed most conveniently by precipitation. Although storage of plasma is commonly necessary, little information is available on the long-term stability of HDL subclasses at different temperatures. Therefore, we quantified HDL-C, HDL2-C, and HDL3-C by dual precipitation with heparin-MnCl2/15-kDa dextran sulfate (H-M/DS) in samples of EDTA-plasma from 93 healthy subjects, after storage for one to 433 days at -20 degrees C, at -70 degrees C, or in liquid nitrogen (-196 degrees C). Fourteen samples (15%) were stored for a year or longer. At -20 degrees C, HDL-C decreased by 4.8% per year and HDL3-C decreased by 6.9% per year (P = 0.002 for both variables) relative to results obtained with samples stored in liquid nitrogen; total cholesterol, HDL2-C, and triglyceride did not change significantly at this temperature. When stored at -70 degrees C, none of the lipids showed any change relative to results obtained with liquid nitrogen. Thus, long-term storage of EDTA-plasma at -20 degrees C is unsuitable for subsequent quantification of HDL-C and its subclasses by H-M/DS dual precipitation. Storage at -70 degrees C is preferable, and is as reliable as storage in liquid nitrogen.

scholarly journals Seed longevity of maize conserved under germplasm bank conditions for up to 60 years

2021 ◽  
Author(s):  
Filippo Guzzon ◽  
Maraeva Gianella ◽  
Jose Alejandro Velazquez Juarez ◽  
Cesar Sanchez Cano ◽  
Denise E Costich
Keyword(s):  
Seed Germination ◽  
Plant Genetic Resources ◽  
Seed Viability ◽  
Storage Conditions ◽  
Seed Longevity ◽  
Germplasm Bank ◽  
Significant Difference ◽  
Different Temperatures ◽  
Germination Experiments

Abstract Background and Aims The long-term conservation of seeds of plant genetic resources is of key importance for food security and preservation of agrobiodiversity. Nevertheless, there is scarce information available about seed longevity of many crops under germplasm bank conditions. Methods Through germination experiments as well as the analysis of historical monitoring data, we studied the decline in viability manifested by 1000 maize (Zea mays subsp. mays) seed accessions conserved for an average of 48 years at the CIMMYT germplasm bank, the largest maize seedbank in the world, under two cold storage conditions: an active (–3 °C; intended for seed distribution) and a base conservation chamber (–15 °C; for long-term conservation). Key Results Seed lots stored in the active chamber had a significantly lower and more variable seed germination, averaging 81.4 %, as compared with the seed lots conserved in the base chamber, averaging 92.1 %. The average seed viability detected in this study was higher in comparison with that found in other seed longevity studies on maize conserved under similar conditions. A significant difference was detected in seed germination and longevity estimates (e.g. p85 and p50) among accessions. Correlating seed longevity with seed traits and passport data, grain type showed the strongest correlation, with flint varieties being longer lived than floury and dent types. Conclusions The more rapid loss of seed viability detected in the active chamber suggests that the seed conservation approach, based on the storage of the same seed accessions in two chambers with different temperatures, might be counterproductive for overall long-term conservation and that base conditions should be applied in both. The significant differences detected in seed longevity among accessions underscores that different viability monitoring and regeneration intervals should be applied to groups of accessions showing different longevity profiles.

Antioestrogen inhibition of oestradiol-induced alterations in hypothalamic noradrenaline turnover

1985 ◽  
Vol 106 (1) ◽  
pp. 37-42 ◽  
Author(s):  
C. Hiemke ◽  
B. Poetz ◽  
R. Ghraf
Keyword(s):  
Brain Area ◽  
Serum Levels ◽  
Ovariectomized Rats ◽  
Noradrenaline Turnover ◽  
Stimulatory Action ◽  
Enhanced Sensitivity ◽  
Oestradiol Benzoate ◽  
Lh Release ◽  
Secretory System

ABSTRACT Long-term (4–6 weeks) ovariectomized rats were injected with either oestradiol benzoate (OB; 20 μg s.c.) or monohydroxytamoxifen (MTAM; 0·2 mg i.p.) plus OB. Oestradiol benzoate was administered at 12.00 h on day 0 and MTAM was given immediately before OB, followed by further injections twice daily to maintain sufficiently high antioestrogen levels. When given alone, OB reduced the serum levels of LH during the morning (08.00–09.00 h) and afternoon (17.30–18.30 h) hours of day 3 after priming. The feedback actions of OB on LH release were accompanied by time-dependent alterations of noradrenaline turnover in the preoptic–anterior hypothalamic brain area (POAH). On day 3 after priming the noradrenaline turnover rate was reduced in the morning and increased in the afternoon. The increase correlated with an enhanced sensitivity of the LH secretory system to progesterone. The antioestrogen MTAM blocked the OB-induced sensitization of LH release to the stimulatory action of progesterone and interfered with the stimulatory long-term effect of oestradiol on hypothalamic noradrenaline turnover. The data strongly support the view that the oestrogen-induced afternoon increase of noradrenaline turnover in the POAH represents a pre-requisite for the induction of LH surges. The stimulatory effect of oestradiol on hypothalamic noradrenaline turnover seems to be mediated by a classical oestrogen receptor mechanism. J. Endocr. (1985) 106, 37–42

scholarly journals Mediterranean Sea climatic indices: monitoring long term variability and climate changes

2018 ◽  
Author(s):  
Athanasia Iona ◽  
Athanasios Theodorou ◽  
Sarantis Sofianos ◽  
Sylvain Watelet ◽  
Charles Troupin ◽  
...  
Keyword(s):  
Climate Change ◽  
Time Series ◽  
Mediterranean Sea ◽  
Climate Changes ◽  
Salt Content ◽  
Climatic Indices ◽  
In Situ Observations ◽  
The Mediterranean

Abstract. We present a new product composed of a set of thermohaline climatic indices from 1950 to 2015 for the Mediterranean Sea such as decadal temperature and salinity anomalies, their mean values over selected depths, decadal ocean heat and salt content anomalies at selected depth layers as well as their long times series. It is produced from a new high-resolution climatology of temperature and salinity on a 1/8° regular grid based on historical high quality in situ observations. Ocean heat and salt content differences between 1980–2015 and 1950–1979 are compared for evaluation of the climate shift in the Mediterranean Sea. The spatial patterns of heat and salt content shifts demonstrate in greater detail than ever before that the climate changes differently in the several regions of the basin. Long time series of heat and salt content for the period 1950 to 2015 are also provided which indicate that in the Mediterranean Sea there is a net mean volume warming and salting since 1950 with acceleration during the last two decades. The time series also show that the ocean heat content seems to fluctuate on a cycle of about 40 years and seems to follow the Atlantic Multidecadal Oscillation climate cycle indicating that the natural large scale atmospheric variability could be superimposed on to the warming trend. This product is an observations-based estimation of the Mediterranean climatic indices. It relies solely on spatially interpolated data produced from in-situ observations averaged over decades in order to smooth the decadal variability and reveal the long term trends with more accuracy. It can provide a valuable contribution to the modellers' community, next to the satellite-based products and serve as a baseline for the evaluation of climate-change model simulations contributing thus to a better understanding of the complex response of the Mediterranean Sea to the ongoing global climate change. The product is available here: https://doi.org/10.5281/zenodo.1210100.

scholarly journals Compressibility behavior of Boron (Tincal) added to sand-bentonite mixtures under different temperatures

2020 ◽  
Vol 205 ◽  
pp. 09007
Author(s):  
Sukran Gizem Alpaydin ◽  
Yeliz Yukselen-Aksoy
Keyword(s):  
High Temperature ◽  
Volume Deformation ◽  
Landfill Liners ◽  
Low Thermal Expansion ◽  
Boron Minerals ◽  
Different Temperatures ◽  
Increasing Temperature ◽  
Waste Repositories ◽  
Oedometer Tests ◽  
Soil Changes

The importance of thermal behaviour of soils has increased significantly with increasing number of energy structures. There is a need for soils, which show design criteria (strength, permeability, etc.) performance during their life under high temperature or thermal cycles. In the literature studies, it was observed that the volumetric deformation of the soil changes with increasing temperature. Sand-bentonite mixtures generally act as impervious barrier in areas such as nuclear waste repositories, landfill liners etc. These mixtures will be exposed to high temperature; therefore, their engineering performance should not alter under high temperature. Boron is used in the industry for high temperature resistance, flexibility, lightness, power and ease of production. Boron minerals have very low thermal expansion and they are also resistant to thermal shocks. For that reason, the properties of sand-bentonite mixtures can be improved by boron additives at high temperatures. In this study, volume deformation behavior of sand-bentonite mixtures was determined in the presence of tincal. The oedometer tests were performed under room temperature and 80°C.

scholarly journals Single-Cell Tests to Explore the Reliability of Sofc Installations Operating Offshore

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1624
Author(s):  
Nelson Thambiraj ◽  
Ivar Waernhus ◽  
Crina Suciu ◽  
Arild Vik ◽  
Alex C. Hoffmann
Keyword(s):  
Cell Structure ◽  
Oxygen Depletion ◽  
X Ray Diffraction ◽  
Short Term ◽  
Sem Images ◽  
Cathode Degradation ◽  
Air Supply ◽  
Different Temperatures ◽  
Effect Of Oxygen

This paper studies the robustness of off-shore solid oxide fuel cell (SOFC) installations and the nature and causes of possible cell degradation in marine environments. Two important, cathode-related, impediments to ensuring SOFC reliability in off-shore installations are: cathode degradation due to salt contamination and oxygen depletion in the air supply. Short-term and long-term tests show the effect of salt contamination in the cathode feed on cell performance, and reveal the underlying cause of the degradation seen. SEM/X-ray Diffraction/(XRD) analyses made it possible to identify salt taken up in the cathode microstructure after the short-term testing while the macroscopic cell structure remained intact after the short-term tests. The long-term degradation was found to be more severe, and SEM images showed delamination at the cathode/electrolyte interface with salt present, something that was not seen after long-term testing without salt. The effect of oxygen depletion on the performance was also determined at three different temperatures using I-V curves.

Sign in / Sign up

Export Citation Format

Share Document