Estimating extreme avalanche runout for the Columbia Mountains and Fernie area Rocky Mountains of British Columbia, Canada

2012 ◽  
Vol 49 (11) ◽  
pp. 1309-1318 ◽  
Author(s):  
Katherine S. Johnston ◽  
Bruce Jamieson ◽  
Alan Jones

Extreme snow avalanche runout is typically estimated using a combination of historical and vegetation records as well as statistical and dynamic models. The two classes of statistical models (α–β and runout ratio) are based on estimating runout distance past the β-point, which is typically defined as the point where the avalanche slope incline first decreases to 10°. The parameters for these models vary from mountain range to mountain range. In Canada, α–β and runout ratio parameters have been published for the combined Rocky and Purcell Mountains and for the British Columbia Coast Mountains. Despite active development, no suitable tall avalanche path model parameters have been published for the Columbia Mountains or for the Lizard Range area around Fernie, B.C. Using a dataset of 65 avalanche paths, statistical model parameters have been derived for these regions.

2004 ◽  
Vol 38 ◽  
pp. 15-20 ◽  
Author(s):  
Urs Gruber ◽  
Pascal Hägeli ◽  
David M. McClung ◽  
Evan Manners

AbstractDaily weather measurements, snow stability assessments and recorded weak layers of 23 stations covering an observation area of approximately 40 000 km2 in western Canada were analyzed. The study area includes three major mountain ranges with different snow climates. All stations included assess the stability of the snow cover. However, the focus of the avalanche safety program of the different types of operation (heli-ski operation, ski resorts and parks) varies significantly. The three stations in the Coast Mountains show the highest snow stability, followed by the South Columbia Mountains and then the North Columbia and Rocky Mountains. The weather data were analyzed to try to explain some of these differences. Intensive snowfall at relatively high temperatures proved to be important for the higher snow stability over the season in the Coast Mountains. Theweak-layer data were used to complement the snow stability assessments. Most persistent weak layers were reported in the Columbia Mountains, followed by the three stations in the Coast Mountains and trailed by the Rocky Mountains. Although some weather observations indicate climatic reasons for the smaller number of weak layers in the Rocky Mountains, it cannot be excluded that these differences are also related to the different type of operations.


2017 ◽  
Vol 21 (3) ◽  
pp. 1827-1847 ◽  
Author(s):  
Siraj Ul Islam ◽  
Stephen J. Déry

Abstract. This study evaluates predictive uncertainties in the snow hydrology of the Fraser River Basin (FRB) of British Columbia (BC), Canada, using the Variable Infiltration Capacity (VIC) model forced with several high-resolution gridded climate datasets. These datasets include the Canadian Precipitation Analysis and the thin-plate smoothing splines (ANUSPLIN), North American Regional Reanalysis (NARR), University of Washington (UW) and Pacific Climate Impacts Consortium (PCIC) gridded products. Uncertainties are evaluated at different stages of the VIC implementation, starting with the driving datasets, optimization of model parameters, and model calibration during cool and warm phases of the Pacific Decadal Oscillation (PDO). The inter-comparison of the forcing datasets (precipitation and air temperature) and their VIC simulations (snow water equivalent – SWE – and runoff) reveals widespread differences over the FRB, especially in mountainous regions. The ANUSPLIN precipitation shows a considerable dry bias in the Rocky Mountains, whereas the NARR winter air temperature is 2 °C warmer than the other datasets over most of the FRB. In the VIC simulations, the elevation-dependent changes in the maximum SWE (maxSWE) are more prominent at higher elevations of the Rocky Mountains, where the PCIC-VIC simulation accumulates too much SWE and ANUSPLIN-VIC yields an underestimation. Additionally, at each elevation range, the day of maxSWE varies from 10 to 20 days between the VIC simulations. The snow melting season begins early in the NARR-VIC simulation, whereas the PCIC-VIC simulation delays the melting, indicating seasonal uncertainty in SWE simulations. When compared with the observed runoff for the Fraser River main stem at Hope, BC, the ANUSPLIN-VIC simulation shows considerable underestimation of runoff throughout the water year owing to reduced precipitation in the ANUSPLIN forcing dataset. The NARR-VIC simulation yields more winter and spring runoff and earlier decline of flows in summer due to a nearly 15-day earlier onset of the FRB springtime snowmelt. Analysis of the parametric uncertainty in the VIC calibration process shows that the choice of the initial parameter range plays a crucial role in defining the model hydrological response for the FRB. Furthermore, the VIC calibration process is biased toward cool and warm phases of the PDO and the choice of proper calibration and validation time periods is important for the experimental setup. Overall the VIC hydrological response is prominently influenced by the uncertainties involved in the forcing datasets rather than those in its parameter optimization and experimental setups.


2001 ◽  
Vol 32 ◽  
pp. 299-305 ◽  
Author(s):  
M. Barbolini ◽  
F. Savi

AbstractThe present work addresses the urgent demand for methods of quantifying the uncertainties inherent in the current procedures for avalanche hazard assessment. A Monte Carlo approach to hazard mapping is proposed for this purpose. This statistical sampling-analysis method allows us to evaluate the probability distributions of the relevant variables for avalanche hazard assessment –– essentially runout distance and impact pressure-once the release variables and the model parameters are expressed in terms of suitable probability distributions. In this way it is possible to explicitly account for uncertainties both in the input-data definition of the dynamic models and in the mapping results. The overall methodology is presented in detail and applied to a real-world avalanche mapping problem. The one-dimensional version of the VARA models is used for avalanche dynamics simulations.


2016 ◽  
Author(s):  
Siraj Ul Islam ◽  
Stephen J. Déry

Abstract. This study evaluates predictive uncertainties in the snow hydrology of the Fraser River Basin (FRB) of British Columbia (BC), Canada, using the Variable Infiltration Capacity (VIC) model forced with several high-resolution gridded climate datasets. These datasets include the Canadian Precipitation Analysis and the thin-plate smoothing splines (ANUSPLIN), the North American Regional Reanalysis (NARR), University of Washington (UW) and Pacific Climate Impacts Consortium (PCIC) gridded products. Uncertainties are evaluated at different stages of the VIC implementation starting with the driving datasets, optimization of model parameters, and model calibration during cool and warm phases of the Pacific Decadal Oscillation (PDO). The inter-comparison of the forcing datasets (precipitation and air temperature) and their VIC simulations (snow water equivalent (SWE) and runoff) reveal widespread differences over the FRB especially in mountainous regions. The ANUSPLIN precipitation shows a considerable dry bias in the Rocky Mountains whereas the NARR winter air temperature is 2 °C warmer than the other datasets over most of the FRB. In the VIC simulations, the elevation-dependent changes in the maximum SWE (maxSWE) are more prominent at higher elevations of the Rocky Mountains where PCIC-VIC simulation accumulates too much SWE and ANUSPLIN-VIC yields an underestimation. Additionally, at each elevation range, the day of maxSWE varies 10 to 20 days between the VIC simulations. The snow melting season begins early in NARR-VIC simulation whereas PCIC-VIC simulation delays the melting indicating seasonal uncertainty in SWE simulations. When compared with the observed runoff for the Fraser River main stem at Hope, BC, the ANUSPLIN-VIC simulation shows considerable underestimation of runoff throughout the water year owing to reduced precipitation in the ANUSPLIN forcing dataset. The NARR-VIC simulation yields more winter and spring runoff and earlier decline of flows in summer due to a nearly 15-day earlier onset of the FRB springtime snowmelt. Analysis of the parametric uncertainty in the VIC calibration process shows that the choice of the initial parameter range plays a crucial role in defining the model hydrological response for the FRB. Furthermore, the VIC calibration process is biased toward cool and warm phases of the PDO and the choice of proper calibration and validation time periods is important for the experimental setup. Overall the VIC hydrological response is prominently influenced by the uncertainties involved in the forcing datasets rather than those in its parameters optimization and experimental setups.


2001 ◽  
Vol 32 ◽  
pp. 223-229 ◽  
Author(s):  
D. M. McClung

AbstractThis paper contains statistical analyses of parameters to characterize starting zones of destructive avalanches which have resulted from clear-cut logging in British Columbia, Canada. Data from 76 avalanche sites in the Coast Mountains (western British Columbia) and the Columbia Mountains (eastern British Columbia) are analyzed. The parameters include a selection which characterize snow supply (related to potential avalanche frequency), avalanche magnitude and those which are known to affect avalanche formation including terrain features, vegetation density, vegetation height and ground surface roughness. The results provide the data framework for possibly preventing future disasters by altering logging plans.


1971 ◽  
Vol 8 (7) ◽  
pp. 743-752 ◽  
Author(s):  
Howard W. Tipper

During Fraser Glaciation central British Columbia was covered by glacier ice that accumulated in the Coast and Cariboo Mountains, flowed inwardly as a piedmont glacier to the Interior Plateau and thence northeasterly as an ice sheet toward the Rocky Mountains. After withdrawal of the Fraser ice sheet a limited re-advance of ice from Cariboo and Coast Mountains took place but not as a coalescent ice sheet. Drumlinoid forms, eskers, meltwater channels, kettled deposits, and lacustrine deposits provide ample evidence from which a glacial history of the area can be deduced. Although Fraser Glaciation is not believed to have culminated as an ice dome over central British Columbia, there is some evidence to suggest that earlier glaciations did form such a dome from which ice flowed radially over the Coast and Rocky Mountains.


2021 ◽  
pp. 875697282199994
Author(s):  
Joseph F. Hair ◽  
Marko Sarstedt

Most project management research focuses almost exclusively on explanatory analyses. Evaluation of the explanatory power of statistical models is generally based on F-type statistics and the R 2 metric, followed by an assessment of the model parameters (e.g., beta coefficients) in terms of their significance, size, and direction. However, these measures are not indicative of a model’s predictive power, which is central for deriving managerial recommendations. We recommend that project management researchers routinely use additional metrics, such as the mean absolute error or the root mean square error, to accurately quantify their statistical models’ predictive power.


Sign in / Sign up

Export Citation Format

Share Document