Finite element analysis of highway construction in peat bog

2008 ◽  
Vol 45 (2) ◽  
pp. 147-160 ◽  
Author(s):  
Yong Tan
Keyword(s):  
Finite Element ◽  
Soft Soil ◽  
Interaction Mechanism ◽  
Field Measurements ◽  
Sheet Pile ◽  
Element Analysis ◽  
Peat Deposits ◽  
Roadway Construction ◽  
Long Term Performance ◽  
Term Performance

Parts of a U.S. Route 44 relocation project span across cranberry bog areas with deep peat deposits. The peat in the proposed roadway side was completely excavated and backfilled with granular soils, and using sheet pile walls as retaining structures. As peat exhibits low strength, high compressibility, and significant creep behavior, the long-term performance of the sheet pile walls was a great concern. To monitor the development of sheet pile deflections and total lateral earth pressures in peat, selected sheet piles located in peat deposits were instrumented with pressure cells and inclinometer casings. Furthermore, to understand the soil–structure interaction mechanism during roadway construction, the finite element (FE) code PLAXIS was employed to continuously model roadway construction in peat deposits. Peat was simulated by a soft soil creep (SSC) model, which can account for creep effects. One of the challenges in this simulation was how to model deep dynamic compaction (DDC), since the enormous momentum induced by DDC would cause local failure of the soil body and consequently result in termination of the program. This problem was satisfactorily solved by using a dynamic approach presented in this paper, and the FE-calculated results were compared with the field measurements. The comparison indicated that FE modeling yields predictions in a good agreement with field measurements and also could provide some reasonable explanations for the field observations.

Predicting the long-term performance of a wide embankment on soft soil using an elastic–viscoplastic model

2010 ◽  
Vol 47 (2) ◽  
pp. 244-257 ◽  
Author(s):  
M. R. Karim ◽  
C. T. Gnanendran ◽  
S.-C. R. Lo ◽  
J. Mak
Keyword(s):  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Soil ◽  
Element Analysis ◽  
Foundation Soil ◽  
Vertical Permeability ◽  
Input Material ◽  
Modified Cam Clay ◽  
Long Term Performance ◽  
Term Performance

This paper presents modelling of the consolidation of foundation soil under a wide embankment constructed over soft soil. An elastic–viscoplastic (EVP) constitutive model is used to represent the foundation soil for the coupled finite element analysis (FEA). A unit-cell analysis is carried out to capture the maximum settlement and the development of excess pore-water pressure with time below the centreline of the embankment for a long period (9 years). A new function for capturing the varying nature of the creep or secondary compression coefficient is proposed and used in association with the EVP model. The input material parameters for this study were determined from extensive laboratory experiments except for the equivalent horizontal permeability, which was systematically estimated by using vertical permeability data obtained from one-dimensional consolidation tests and by back-analysing the first 12 months of field settlement data. Comparisons are made among the predictions obtained adopting an elastoplastic modified Cam clay model and the EVP model with constant and varying creep coefficients for the foundation soil and the corresponding field data. The predictions with the EVP model are found to be better than those with the elastoplastic model and the use of a varying creep coefficient for the EVP model seems to further improve its predicting ability.

Nonlinear Finite Element Analysis of Super-Long Pile and Soil Interaction in Soft Soil

2011 ◽  
Vol 201-203 ◽  
pp. 1601-1605 ◽  
Author(s):  
Shang Ping Chen ◽  
Wen Juan Yao ◽  
Sheng Qing Zhu
Keyword(s):  
Finite Element ◽  
Constitutive Model ◽  
Soft Soil ◽  
Three Dimensional ◽  
Nonlinear Behavior ◽  
Element Model ◽  
Element Analysis ◽  
Friction Resistance ◽  
Tip Resistance ◽  
Side Friction

In this paper, a nonlinear three-dimensional finite element model for super-long pile and soil interaction is established. In this model, contact elements are applied to simulate the nonlinear behavior of interaction of super-long pile and soil. A nonlinear elastic constitutive model for concrete is employed to analyze stress-strain relation of pile shaft under the axial load and the Duncan-Chang’s nonlinear constitutive model is used to reflect nonlinear and inelastic properties of soil. The side friction resistance, axial force, pile-tip resistance, and developing trend of soil plastic deformation are obtained and compared with measured results from static load tests. It is demonstrated that a super-long pile has the properties of degradation of side friction resistance and asynchronous action between side and pile-tip resistance, which is different from piles with a short to medium length.

scholarly journals Long-Term Settlement of High Concrete-Face Rockfill Dam by Field Monitoring and Numerical Simulation

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Xinjie Zhou ◽  
Xinjian Sun ◽  
Junxing Zheng ◽  
Haoyuan Jiang ◽  
Yongye Li ◽  
...  
Keyword(s):  
Finite Element ◽  
Creep Deformation ◽  
Deformation Behavior ◽  
Finite Element Software ◽  
Rockfill Materials ◽  
Stress And Deformation ◽  
Long Term Performance ◽  
Term Performance ◽  
Concrete Face

High concrete-face rockfill dams (CFRDs) with heights of over 100 m have been quickly developed in recent years. The self-weight of rockfill materials causes creep deformation of the dam body. However, the creep analysis method of high CFRDs in finite element software is few, and sometimes, it can also not reflect the long-term performance of high CFRDs well. Therefore, it is necessary to carry out the secondary development in finite element software. This study developed a subroutine that can run in Finite Element Method (FEM) platform ABAQUS to simulate long-term creep deformation behavior of the rockfill materials more accurately. Then, a displacement back-analysis for parameters, based on the Xujixia high CFRD project, is performed by the neural network response surface method (BP-MPGA/MPGA). Remarkable agreements are observed between simulation and field monitoring results. The calibrated FEM model is used to predict stress and deformation behavior of the Xujixia high CFRD after three years of operation period. The result indicates that rockfill creep deformation has a significant impact on stress and deformation of the high CFRD during the operation. This research may predict long-term performance using FEM in the design stage for high CFRDs.

scholarly journals Long-Term Performance of Trestle Bridges: Case Study of an Indonesian Marine Port Structure

2020 ◽  
Vol 8 (5) ◽  
pp. 358 ◽  
Author(s):  
Yusak Oktavianus ◽  
Massoud Sofi ◽  
Elisa Lumantarna ◽  
Gideon Kusuma ◽  
Colin Duffield
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Service Life ◽  
Field Measurement ◽  
Field Measurements ◽  
Element Analysis ◽  
Moment Capacity ◽  
Non Destructive

A precast reinforced concrete (RC) T-beam located in seaport Terminal Peti Kemas (TPS) Surabaya built in 1984 is used as a case study to test the accuracy of non-destructive test techniques against more traditional bridge evaluation tools. This bridge is mainly used to connect the berth in Lamong gulf and the port in Java Island for the logistic purposes. The bridge was retrofitted 26 years into its life by adding two strips of carbon fiber reinforced polymer (CFRP) due to excessive cracks observed in the beams. Non-destructive field measurements were compared against a detailed finite element analysis of the structure to predict the performance of the girder in terms of deflection and moment capacity before and after the retrofitting work. The analysis was also used to predict the long-term deflections of the structure due to creep, crack distribution, and the ultimate moment capacity of the individual girder. Moreover, the finite element analysis was used to predict the deflection behavior of the overall bridge due to vehicle loading. Good agreement was obtained between the field measurement and the analytical study. A new service life of the structure considering the corrosion and new vehicle demand is carried out based on field measurement using non-destructive testing. Not only are the specific results beneficial for the Indonesian port authority as the stakeholder to manage this structure, but the approach detailed also paves the way for more efficient evaluation of bridges more generally over their service life.

A new test method for evaluating the long-term performance of fiber-reinforced concrete pipes

2019 ◽  
Vol 23 (7) ◽  
pp. 1336-1349 ◽  
Author(s):  
Fouad T Al Rikabi ◽  
Shad M Sargand ◽  
Issam Khoury ◽  
John Kurdziel
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Steel Reinforcement ◽  
Fiber Reinforced Concrete ◽  
Synthetic Fiber ◽  
Concrete Pipes ◽  
Concrete Pipe ◽  
Long Term Performance ◽  
Term Performance

Synthetic fibers have been used recently to minimize the need for steel reinforcement in the concrete pipe to enhance their ductility. However, synthetic fiber has properties that may change over time due to its viscoelastic behavior. The objective of this study is to investigate the long-term performance of fiber-reinforced concrete pipes using a new test frame. A three-dimensional finite element model was created for the long-term testing frame to ensure its compliance with the American Society for Testing and Materials requirement. The finite element results showed that the testing frame successfully transferred the load to the concrete as the pipe cracked at the location where high flexural stresses are expected. Concrete pipe reinforced with synthetic fiber dosage of 9 kg/m3 along the steel reinforcement area of 5.7 cm2/m was tested to evaluate the concrete pipe system performance. The pipe was tested under two load stages for 120 days each. Load stages 1 and 2 included applying 40% and 70% of the ultimate load obtained by the authors in a previous study, respectively. The strain and deflection increased linearly within 5 days of applying the load and then leveled off. The pipe showed a slight increase in the crack width and deflection, indicating that fiber creep did not have a significant impact on the long-term performance of the concrete pipe. Also, it was observed that strain values surpassed those for plain concrete material, suggesting that including synthetic fiber in the concrete pipe mix enhanced the pipe ductility.

Three-dimensional finite element modelling of a full-scale geosynthetic-reinforced, pile-supported embankment

2015 ◽  
Vol 52 (12) ◽  
pp. 2041-2054 ◽  
Author(s):  
R. Kerry Rowe ◽  
K.-W. Liu
Keyword(s):  
Finite Element ◽  
Soft Soil ◽  
Three Dimensional ◽  
Single Layer ◽  
Full Scale ◽  
Numerical Results ◽  
Element Analysis ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Pile Supported Embankment

The performance of four sections of a full-scale embankment constructed on soft soil is examined using a fully coupled and fully three-dimensional finite element analysis. The four sections had similar embankment loadings but different improvement options (one unimproved, one with pile-support only, one with a single layer geotextile-reinforced platform and pile-support, and one with two layers of geogrid-reinforced platform and pile-support). Like the field data, the numerical results show that the inclusion of piles decreases the settlement at the subsoil surface to 52% of that for the unimproved section, and the addition of a single layer of geotextile reinforcement (J = 800 kN/m) further reduced settlement to only 31% of that of the unimproved section. The effects of geosynthetic reinforcement and multiple layers of reinforcement on the performance of the pile-supported embankment are discussed. The relative load transfer is calculated using eight existing methods and they are compared with the field measurements and numerical results.

Sign in / Sign up

Export Citation Format

Share Document