Determination of plane-strain shear strength of sand from the results of triaxial tests

2001 ◽  
Vol 38 (6) ◽  
pp. 1231-1240 ◽  
Author(s):  
Adel Hanna
Keyword(s):  
Experimental Investigation ◽  
Shear Strength ◽  
Plane Strain ◽  
Soil Mechanics ◽  
Triaxial Compression ◽  
Triaxial Tests ◽  
Test Results ◽  
Shearing Resistance ◽  
Conventional Triaxial Compression ◽  
Strain Testing

Experimental investigation of the shear strength of dry sands was carried out using triaxial and plane-strain apparatus. The results were used to evaluate Rowe's stress–dilatancy theory, the relationships between the shear strength components due to friction and interlocking, and the volume-change characteristics for cases of plane-strain and axisymmetric boundary conditions. Because of the complexity of the plane-strain testing apparatus in the normal soil mechanics laboratory and the difficulties involved in performing this type of shear test, it is becoming costly to obtain plane-strain test results for consulting purposes. Based on Rowe's stress–dilatancy theory, the results of the present investigation, and the available test results in the literature, two simple methods are proposed to predict the angle of shearing resistance for plane-strain conditions from the results of the conventional triaxial compression tests.Key words: shear strength, plane-strain test, triaxial test, sand, experimental investigation, geotechnical engineering.

scholarly journals Comparison of Mechanical Properties of Fiber-Reinforced Sand under Triaxial Compression and Direct Shear

2015 ◽  
Vol 7 (1) ◽  
Author(s):  
Reza Noorzad ◽  
Seyed Taher Ghoreyshi Zarinkolaei
Keyword(s):  
Shear Strength ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Polypropylene Fiber ◽  
Triaxial Tests ◽  
Direct Shear ◽  
Test Results ◽  
Peak Reduction ◽  
Shear Tests ◽  
Direct Shear Tests

AbstractThis research investigates the behavior of sand reinforced with polypropylene fiber. To do this, 40 direct shear tests and 40 triaxial tests were performed on the coastal beaches of Babolsar, a city in the North of Iran. The effect of parameters such as fiber content, length of fiber and normal or confining pressure on the behavior of Babolsar sand have been studied. In this study, four various fiber contents (0, 0.25, 0.5 and 1 percent), three different lengths of fiber (6, 12 and 18 mm) and four normal or confining pressures (50, 100, 200 and 400 kPa) have been employed. The test results show that fiber inclusion has a significant effect on the behavior of sand. In both direct shear and triaxial tests, the addition of fibers improved shear strength parameters (C, '), increased peak shear strength and axial strain at failure, and also limited the amount of post-peak reduction in shear resistance. The comparison of the test results revealed that due to better fiber orientation toward the direction of principal tensile strain in triaxial test as compared to direct shear tests, the fiber efficiency and its effect on soil behavior is much more significant in triaxial specimens.

A Change of Undrain Shear Strength of Soft Ground during Consolidation Process

2014 ◽  
Vol 513-517 ◽  
pp. 269-272
Author(s):  
Yeong Mog Park ◽  
Ik Joo Um ◽  
Norihiko Miura ◽  
Seung Cheol Baek
Keyword(s):  
Shear Strength ◽  
Soft Clay ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Test Results ◽  
Exponential Equation ◽  
Consolidation Process ◽  
Degree Of Consolidation ◽  
Clay Ground ◽  
Strength Increment

The purpose of this study is to investigate the undrain shear strength increment during consolidation process of soft clayey soils. Thirty kinds of laboratory triaxial tests have been performed using undisturbed and remolded Ariake clay samples with different degree of consolidation and 5 kinds of confining pressure. Test results show that well known linear equation proposed by Yamanouchi et al.(1982) is overestimated the strength of undisturbed soft clay ground in the process of consolidation. A new simple and reasonable exponential equation proposed in this paper.

scholarly journals Relation between the Friction Angle of Sand at Triaxial Compression and Triaxial Extension and Plane Strain Conditions

Geosciences ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 29 ◽  
Author(s):  
Zenon Szypcio
Keyword(s):  
Plane Strain ◽  
Soil Mechanics ◽  
Triaxial Compression ◽  
Deformation Mode ◽  
Friction Angle ◽  
Failure Criteria ◽  
Compression Tests ◽  
Laboratory Test Results ◽  
Experimental Findings ◽  
Triaxial Extension

The strength of sand is usually characterized by the maximum value of the secant friction angle. The friction angle is a function of deformation mode, density, and stress level and is strongly correlated with dilatancy at failure. Most often, the friction angle is evaluated from results of conventional compression tests, and correlation between the friction angle of sand at triaxial compression and triaxial extension and plane strain conditions is a vital problem of soil mechanics. These correlations can be obtained from laboratory test results. The failure criteria for sand presented in literature also give the possibility of finding correlations between friction angles for different deformation modes. The general stress-dilatancy relationship obtained from the frictional state concept, with some additional assumptions, gives the possibility of finding theoretical relationships between the friction angle of sand at triaxial compression and triaxial extension and plane strain conditions. The theoretically obtained relationships presented in the paper are fully consistent with theoretical and experimental findings of soil mechanics.

Anisotropic shear strength of a residual soil of sandstone

2008 ◽  
Vol 45 (3) ◽  
pp. 367-376 ◽  
Author(s):  
Adriano Virgilio Damiani Bica ◽  
Luiz Antônio Bressani ◽  
Diego Vendramin ◽  
Flávia Burmeister Martins ◽  
Pedro Miguel Vaz Ferreira ◽  
...  
Keyword(s):  
Shear Strength ◽  
Effective Stress ◽  
Yield Surface ◽  
Triaxial Compression ◽  
Strength Properties ◽  
Triaxial Tests ◽  
Residual Soil ◽  
Compression Tests ◽  
Soil Stiffness ◽  
Particle Bonding

This paper discusses results of laboratory tests carried out with a residual soil originated from the weathering of eolian sandstone from southern Brazil. Parent rock features, like microfabric and particle bonding, are remarkably well preserved within this residual soil. Stiffness and shear strength properties were evaluated with consolidated drained (CID) and consolidated undrained (CIU) triaxial compression tests. Undisturbed specimens were tested with two different orientations between the specimen axis and bedding surfaces (i.e., parallel (δ = 0°) or perpendicular (δ = 90°)) to investigate the effect of anisotropy. When CID triaxial tests were performed with δ = 0°, the yield surface associated with the structure was much larger than when tests were performed with δ = 90°. Coincidently, CIU tests with δ = 0° showed peak shear strengths much greater than for δ = 90° at comparable test conditions. Once the peak shear strength was surpassed, CIU tests followed collapse-type effective stress paths not shown by corresponding tests with remolded specimens. A near coincidence was observed between the yield surface determined with CID tests and the envelope of collapse-type effective stress paths for δ = 0° and δ = 90°.

A Simple and Practicable Approach on Implementing for the Reduced Triaxial Extension by the Conventional Triaxial Apparatus

2011 ◽  
Vol 250-253 ◽  
pp. 2089-2092
Author(s):  
Rong Jian Li ◽  
Xi An Li ◽  
Gao Feng Che ◽  
Wen Zheng ◽  
Wen Jun Chen
Keyword(s):  
Triaxial Compression ◽  
Stress Path ◽  
Test Results ◽  
Triaxial Apparatus ◽  
Eolian Sand ◽  
Conventional Triaxial Compression ◽  
The Difference ◽  
Shear Behaviors ◽  
The Impact ◽  
Triaxial Extension

Stress path is one of the very important factors of soil strength. It is significant to study the strength and reveal the importance of the impact of sand in different stress path conditions. Firstly, an ameliorating approach on implementing for the reduced triaxial extension by the conventional triaxial apparatus was discussed. Then, In order to study shear behaviors of the eolian sand under different stress path, two monotonic shearing tests with the conventional triaxial compression and the reduced triaxial extension stress path were performed and analyzed. The test results not only indicate that the amelioration on conventional triaxial apparatus is simple, practicable and inexpensive, but also reveal the difference of strength’s parameter between the reduced triaxial extension and conventional triaxial compression stress path. In sum, the stress path has important effect on the strength of the eolian sand.

Effects of reinforcing elements on the behavior of weakly cemented sands

1988 ◽  
Vol 25 (2) ◽  
pp. 389-395 ◽  
Author(s):  
Loretta Li ◽  
Robert Mitchell
Keyword(s):  
Shear Strength ◽  
Key Words ◽  
Plane Strain ◽  
Failure Strain ◽  
Test Results ◽  
Cemented Sand ◽  
Mine Backfill ◽  
Unreinforced Material ◽  
Behavior Mining ◽  
Cement Mixture

Plane strain test results from weakly cemented sand samples with various types of reinforcement inclusions are reported. Mesh and anchored fibre types of reinforcements are shown to more than double the plane strain shear strength of a 33:1 sand–cement mixture. Other types of inclusions were not as effective, with some actually producing a strength decrease. All inclusions increased the ductility of this weakly cemented sand, allowing the material to absorb strains of 4–6% rather than the 0.5 – 1% of failure strain in the unreinforced material. The application of reinforcements to cemented tailings used for mine backfill is briefly discussed. Key words: reinforced backfill, cemented sand, behavior, mining.

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

2013 ◽  
Vol 405-408 ◽  
pp. 63-67
Author(s):  
Xing Chen Wang ◽  
Ri Qing Xu ◽  
Jian Feng Zhu
Keyword(s):  
Shear Strength ◽  
Void Ratio ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Deviatoric Stress ◽  
Plasticity Index ◽  
Test Results ◽  
Compression Tests ◽  
Functional Relationships ◽  
Initial Void Ratio

A series of drained triaxial compression tests under different conditions were performed to quantitatively study the influence of the initial void ratio and plasticity index on the shear strength of remolded saturated clays. The test results show that both the peak stress friction angle and peak deviatoric stress decrease with increasing initial void ratio and plasticity index of the soil under the same confining pressure; whereas, they increase with increasing confining pressure of the soil under the same initial void ratio and plasticity index. A new synthesized physical parameter λ, which simultaneously represent both the type and the condition of remolded saturated clays, is defined based on the test results in this work. The functional relationships among the parameters φd and peak deviatoric stress in Mohr-Coulomb equation and the parameter λ are established to develop a modified Mohr-Coulomb equation by considering physical properties of soil. In this equation, only two input parameters, i.e., λ and the confine pressure, are needed to predict the shear strength of the soil. In order to check the accuracy of the proposed equation, laboratory tests were conducted to evaluate against the predicted results. The results show that the peak shear strength of remolded saturated clays can be well described by the proposed equation. Key words: shear strength; Mohr-Coulomb equation; remolded saturated clays; initial void ratio; plasticity index.

scholarly journals X-Ray Microtomography (μCT) as a Useful Tool for Visualization and Interpretation of Shear Strength Test Results

2015 ◽  
Vol 36 (4) ◽  
pp. 47-55 ◽  
Author(s):  
Damian Stefaniuk ◽  
Matylda Tankiewicz ◽  
Joanna Stróżyk
Keyword(s):  
Shear Strength ◽  
Shear Failure ◽  
Triaxial Compression ◽  
Soil Testing ◽  
Geometrical Parameters ◽  
Clayey Soils ◽  
Test Results ◽  
Strength Parameters ◽  
X Ray ◽  
Method Of Evaluation

Abstract The paper demonstrates the applicability of X-ray microtomography (ìCT) to analysis of the results of shear strength examinations of clayey soils. The method of X-ray three-dimensional imaging offers new possibilities in soil testing. The work focuses on a non-destructive method of evaluation of specimen quality used in shear tests and mechanical behavior of soil. The paper presents the results of examination of 4 selected clayey soils. Specimens prepared for the triaxial test have been scanned using ìCT before and after the triaxial compression tests. The shear strength parameters of the soils have been estimated. Changes in soil structure caused by compression and shear failure have been presented as visualizations of the samples tested. This allowed for improved interpretation and evaluation of soil strength parameters and recognition of pre-existing fissures and the exact mode of failure. Basic geometrical parameters have been determined for selected cross-sections of specimens after failure. The test results indicate the utility of the method applied in soil testing.

scholarly journals Numerical Experiments on Triaxial Compression Strength of Soil-Rock Mixture

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Yanxi Zhao ◽  
Zhongxian Liu
Keyword(s):  
Shear Strength ◽  
Triaxial Compression ◽  
Strain Curve ◽  
Friction Angle ◽  
Mechanical Parameters ◽  
Test Results ◽  
Data Statistics ◽  
Nonlinear Hardening ◽  
Properties Of Soil

Soil-rock mixture is a kind of unfavorable geologic material, and it is composed of low-strength soil particles and high-stiffness rock blocks. Mechanical properties of soil-rock mixture were controlled by the internal mesoscopic medium, thus resulting in great difficulties of determination of mechanical parameters. In this paper, influences of rock content, mesoscopic features, and random distribution of mixture in soil-rock mixture on its shear strength were discussed through discrete element numerical simulation of the laboratory triaxial test. Results demonstrated that, with the increase of rock content, the internal friction angle of soil-rock mixture increased continuously, while the cohesion of soil-rock mixture decreased firstly and then increased. The stress-strain curve belonged to a nonlinear hardening type, which was close to soil characteristic. However, the shear strength was affected by mesoscopic medium of mixture particles significantly, resulting in the strong discreteness of strength, and only by large amounts of data statistics can we get a better regularity of strength. The research results can provide references to determine mechanical parameters of soil-rock mixture.

UNDRAINED SHEAR STRENGTH OF K0 CONSOLIDATED SOFT CLAYS UNDER TRIAXIAL AND PLANE STRAIN CONDITIONS

2014 ◽  
Vol 06 (03) ◽  
pp. 1450032 ◽  
Author(s):  
QIUSHENG WANG ◽  
XIULI DU ◽  
QIUMING GONG
Keyword(s):  
Shear Strength ◽  
Plane Strain ◽  
Yield Surface ◽  
Critical State ◽  
Volumetric Strain ◽  
Stress Path ◽  
Undrained Shear Strength ◽  
Triaxial Tests ◽  
Soft Clays ◽  
Undrained Shear

Theoretical formulas for predicting the undrained shear strength of K0 consolidated soft clays under the stress path related to triaxial and plane strain tests are presented within the framework of critical state soil mechanics. An inclined elliptical yield surface is adopted to take account of the initial anisotropic stress state. The undrained strength is determined by combining the undrained stress path in the volumetric stress–strain space and the initial yield surface in the deviator-mean stress space. The derived mathematical expressions are functions of the critical state frictional angle, the plastic volumetric strain ratio and the overconsolidation ratio, which can be simplified into the solutions for isotropically consolidated clays under triaxial tests or under plane strain tests. The results calculated by using the theoretical formulas obtained in this paper are in good agreement with the available collected test results. It indicates that these new formulas are applicable to triaxial and plane strain tests on normally and lightly to moderately overconsolidated soft clays.

Sign in / Sign up

Export Citation Format

Share Document