Preferred orientation of rapidly frozen metals

1982 ◽  
Vol 60 (12) ◽  
pp. 1720-1724 ◽  
Author(s):  
N. W. Blake ◽  
R. W. Smith
Keyword(s):  
Crystal Structure ◽  
Melt Spinning ◽  
Preferred Orientation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zinc Ribbon ◽  
Thin Tape

When metals are rapidly frozen, a preferred orientation may be observed in the grains of the chilled surface. The extent and stability of this preferred orientation has been examined, using X-ray diffraction, for a variety of metals produced by melt-spinning i.e., by directing a fine stream of liquid against a rapidly rotating copper drum to produce a thin tape. It is shown that metals with a hcp crystal structure tend to display the greatest degree of preferred orientation. In particular, the degree of preferred orientation displayed by as-spun zinc ribbon is such that it could be used as an inexpensive crystal analyser for X-ray diffraction, comparing favourably with quartz.

Preferred Orientation in Splat-Quenched Materials

1981 ◽  
Vol 8 ◽  
Author(s):  
N.W. Blake ◽  
F.A. Rames ◽  
R.W. Smith
Keyword(s):  
High Purity ◽  
Melt Spinning ◽  
Preferred Orientation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ribbon Plane ◽  
Extreme Degree ◽  
Melt Spinning Technique

ABSTRACTHigh purity, splat-quenched metal ribbons, produced by the melt spinning technique, were examined for preferred orientation using x-ray diffraction. Of the materials tested (Zn, Cd, Ag, Bi, Pb, Sb, Mg, Sn) all except Sn exhibited some degree of preferred orientation in the plane of the metal ribbon. the hcp metals Zn and Cd showed an extreme degree of preferred orientation with the 002 plane being closely parallel to the ribbon plane. The Zn ribbon was analysed more closely with a view to its use as a crystal monochromator for x-ray diffraction. The high purity Zn was found to have some instability of preferred orientation with increase in time and temperature. The orientation was found to be effectively stabilized by the intentional addition of impurities, or by the use of lower purity (99.99%) Zn. In this form, the Zn ribbon could be used as a crystal analyser for x-ray diffraction with both intensity and resolution comparable to that of the 1011 plane in Quartz.

Highly Textured (111) Pt Substrates for Preferred Orientation Controlled AlN Films

2011 ◽  
Vol 675-677 ◽  
pp. 1259-1262 ◽  
Author(s):  
Takashi Harumoto ◽  
Shinji Muraishi ◽  
Ji Shi ◽  
Yoshio Nakamura
Keyword(s):  
Crystal Structure ◽  
Residual Stress ◽  
Preferred Orientation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tilting Angle ◽  
Diffraction Angle ◽  
The One

Preferred orientation of AlN films has been improved to c-axis using a highly (111) textured Pt layer. The highly textured (111) Pt layer is obtained by inserting an AlN layer between the Pt layer and substrate. Thus, Pt/AlN/substrate could be termed a substrate for preferred orientation controlled AlN films. X-ray diffraction (XRD) profiles reveal that the degree of preferred orientation of such highly (111) textured Pt layer surpasses the one originated from the crystal structure of Pt. The (2θ, ψ) intensify maps of diffracted X-ray collected as a function of the diffraction angle (2θ) and the tilting angle (ψ) exhibit that the films are perfectly (111) preferred orientated, however, they do not show in-plane texture. The (2θ, ψ) maps also demonstrate that a residual stress in films is subject to compressive.

Crystal structure of an inclusion complex between chiral monoaza-15-crown-5 and S(–)-1-phenyl-ethyl ammonium percholorate

2003 ◽  
Vol 218 (5) ◽  
Author(s):  
Süheyla Özbey ◽  
F. B. Kaynak ◽  
M. Toğrul ◽  
N. Demirel ◽  
H. Hoşgören
Keyword(s):  
Crystal Structure ◽  
Inclusion Complex ◽  
Single Crystal ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray ◽  
New Type

AbstractA new type of inclusion complex, S(–)-1 phenyl ethyl ammonium percholorate complex of R-(–)-2-ethyl - N - benzyl - 4, 7, 10, 13 - tetraoxa -1- azacyclopentadecane, has been prepared and studied by NMR, IR and single crystal X-ray diffraction techniques. The compound crystallizes in space group

Crystal Forms of Semisynthetic Ergot Alkaloid Terguride

2002 ◽  
Vol 67 (4) ◽  
pp. 479-489 ◽  
Author(s):  
Michal Hušák ◽  
Bohumil Kratochvíl ◽  
Ivana Císařová ◽  
Ladislav Cvak ◽  
Alexandr Jegorov ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Ergot Alkaloid ◽  
Simplified Model ◽  
Quantum Mechanical ◽  
Quantum Mechanical Calculations ◽  
X Ray Diffraction ◽  
Torsion Angles ◽  
Crystal Forms ◽  
X Ray ◽  
Independent Molecules

Two new structures of semisynthetic ergot alkaloid terguride created by unusual number of symmetry-independent molecules were determined by X-ray diffraction methods at 150 K. Form A (monoclinic, P212121, Z = 12) contains three symmetry-independent terguride molecules and two molecules of water in the asymmetric part of the unit cell. The form CA (monoclinic, P21, Z = 8) is an anhydrate remarkable by the presence of four symmetry-independent molecules in the crystal structure. Conformations of twelve symmetry-independent molecules that were found in four already described terguride structures are compared with torsion angles obtained by ab initio quantum-mechanical calculations for the simplified model of N-cyclohexyl-N'-diethylurea.

scholarly journals High-pressure synthesis and crystal structure of the mixed-cation borate Ga4In4B15O33(OH)3

2019 ◽  
Vol 74 (4) ◽  
pp. 357-363
Author(s):  
Daniela Vitzthum ◽  
Hubert Huppertz
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
High Temperature ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Synthesis And Crystal Structure ◽  
X Ray ◽  
Mixed Cation ◽  
High Pressure High Temperature ◽  
Pressure Synthesis

AbstractThe mixed cation triel borate Ga4In4B15O33(OH)3 was synthesized in a Walker-type multianvil apparatus at high-pressure/high-temperature conditions of 12.5 GPa and 1300°C. Although the product could not be reproduced in further experiments, its crystal structure could be reliably determined via single-crystal X-ray diffraction data. Ga4In4B15O33(OH)3 crystallizes in the tetragonal space group I41/a (origin choice 2) with the lattice parameters a = 11.382(2), c = 15.244(2) Å, and V = 1974.9(4) Å3. The structure of the quaternary triel borate consists of a complex network of BO4 tetrahedra, edge-sharing InO6 octahedra in dinuclear units, and very dense edge-sharing GaO6 octahedra in tetranuclear units.

Crystal structure determination of the conformation of two bicyclo[3.3.1]nonan-ones

1985 ◽  
Vol 63 (6) ◽  
pp. 1166-1169 ◽  
Author(s):  
John F. Richardson ◽  
Ted S. Sorensen
Keyword(s):  
Crystal Structure ◽  
Direct Methods ◽  
Chair Conformation ◽  
Molecular Structures ◽  
Boat Conformation ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray ◽  
Final Agreement

The molecular structures of exo-7-methylbicyclo[3.3.1]nonan-3-one, 3, and the endo-7-methyl isomer, 4, have been determined using X-ray-diffraction techniques. Compound 3 crystallizes in the space group [Formula: see text] with a = 15.115(1), c = 7.677(2) Å, and Z = 8 while 4 crystallizes in the space group P21 with a = 6.446(1), b = 7.831(1), c = 8.414(2) Å, β = 94.42(2)°, and Z = 2. The structures were solved by direct methods and refined to final agreement factors of R = 0.041 and R = 0.034 for 3 and 4 respectively. Compound 3 exists in a chair–chair conformation and there is no significant flattening of the chair rings. However, in 4, the non-ketone ring is forced into a boat conformation. These results are significant in interpreting what conformations may be present in the related sp2-hybridized carbocations.

scholarly journals An investigation of polyhedral deformation in two mixed-metal diarsenates: SrZnAs2O7and BaCuAs2O7

2015 ◽  
Vol 71 (4) ◽  
pp. 330-337 ◽  
Author(s):  
Sabina Kovač ◽  
Ljiljana Karanović ◽  
Tamara Đorđević
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
General Formula ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Open Framework ◽  
Geometrical Characteristics ◽  
Barium Copper

Two isostructural diarsenates, SrZnAs2O7(strontium zinc diarsenate), (I), and BaCuAs2O7[barium copper(II) diarsenate], (II), have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction. The three-dimensional open-framework crystal structure consists of corner-sharingM2O5(M2 = Zn or Cu) square pyramids and diarsenate (As2O7) groups. Each As2O7group shares its five corners with five differentM2O5square pyramids. The resulting framework delimits two types of tunnels aligned parallel to the [010] and [100] directions where the large divalent nine-coordinatedM1 (M1 = Sr or Ba) cations are located. The geometrical characteristics of theM1O9,M2O5and As2O7groups of known isostructural diarsenates, adopting the general formulaM1IIM2IIAs2O7(M1II= Sr, Ba, Pb;M2II= Mg, Co, Cu, Zn) and crystallizing in the space groupP21/n, are presented and discussed.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

scholarly journals Crystal Chemical Relations in the Shchurovskyite Family: Synthesis and Crystal Structures of K2Cu[Cu3O]2(PO4)4 and K2.35Cu0.825[Cu3O]2(PO4)4

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 807
Author(s):  
Ilya V. Kornyakov ◽  
Sergey V. Krivovichev
Keyword(s):  
Crystal Structure ◽  
Crystal Structures ◽  
Structural Complexity ◽  
Crystal Chemical ◽  
X Ray Diffraction ◽  
Complexity Measures ◽  
X Ray ◽  
The Family ◽  
Similarities And Differences ◽  
Related Compounds

Single crystals of two novel shchurovskyite-related compounds, K2Cu[Cu3O]2(PO4)4 (1) and K2.35Cu0.825[Cu3O]2(PO4)4 (2), were synthesized by crystallization from gaseous phase and structurally characterized using single-crystal X-ray diffraction analysis. The crystal structures of both compounds are based upon similar Cu-based layers, formed by rods of the [O2Cu6] dimers of oxocentered (OCu4) tetrahedra. The topologies of the layers show both similarities and differences from the shchurovskyite-type layers. The layers are connected in different fashions via additional Cu atoms located in the interlayer, in contrast to shchurovskyite, where the layers are linked by Ca2+ cations. The structures of the shchurovskyite family are characterized using information-based structural complexity measures, which demonstrate that the crystal structure of 1 is the simplest one, whereas that of 2 is the most complex in the family.

Sign in / Sign up

Export Citation Format

Share Document