Crystal Dynamics of the Alloy Cu3Au

1974 ◽  
Vol 52 (22) ◽  
pp. 2235-2239 ◽  
Author(s):  
E. D. Hallman
Keyword(s):  
Inelastic Scattering ◽  
Frequency Ratio ◽  
Large Scale ◽  
Lattice Vibrations ◽  
Frequency Wave ◽  
Mean Frequency ◽  
Resonance Behavior ◽  
The Mean ◽  
Crystal Dynamics ◽  
Disordered Alloy

Using inelastic scattering of slow neutrons, the frequency wave vector dispersion relations for the lattice vibrations in the disordered alloy Cu3Au have been measured at 296 K. The results are similar to those for copper, with the mean frequency ratio (alloy/copper) being 0.778. A Born–von Kármán fit to the data is given. Although detailed measurements of phonon widths have not yet been made, phonons were generally well defined, with no large scale resonance behavior of frequencies or widths observed.

scholarly journals Two forms of isometric muscle function: Interpersonal motor task supports a distinction between a holding and a pushing isometric muscle action

2020 ◽  
Author(s):  
Laura V Schaefer ◽  
Frank N Bittmann
Keyword(s):  
Muscle Function ◽  
Frequency Ratio ◽  
Neural Control ◽  
Muscle Action ◽  
Triceps Brachii ◽  
Amplitude Variation ◽  
Mean Frequency ◽  
Power Frequency ◽  
The Mean ◽  
Isometric Muscle

AbstractIn sports and movement sciences isometric muscle function is measured by pushing against a stable resistance. However, subjectively one can hold or push isometrically. Several investigations suggest a distinction of those forms. The aim of this study was to investigate, whether or not these two forms of isometric muscle action can be distinguished by objective parameters in an interpersonal setting. 20 subjects were grouped in 10 same sex pairs, in which one partner should perform the pushing isometric muscle action (PIMA) and the other partner executed the holding isometric muscle action (HIMA). The partners were coupled by an interface including a strain gauge and an acceleration sensor. The mechanical oscillations of the triceps brachii (MMGtri) muscle, its tendon (MTGtri) and the abdominal muscle (MMGobl) were recorded by piezoelectric-sensor-based measurement system (mechanomyography (MMG); mechanotendography (MTG)). Each partner performed three 15s (80% MVIC) and two fatiguing trials (90% MVIC) during PIMA and HIMA, respectively (tasks changed in the couple). Regarded parameters to compare PIMA and HIMA were (1) the mean frequency, (2) the normalized mean amplitude, (3) the amplitude variation, (4) the power in the frequency range of 8 to 15 Hz and (5) a special power-frequency ratio and the number of task failures during HIMA or PIMA (partner who quit the task).A “HIMA failure” occurred in 87.5% of trials (p<0.000). No significant differences between PIMA and HIMA were found for the mean frequency and normalized amplitude. The MMGobl showed a significantly higher values of the amplitude variation (15s: p 0.013; fatigue: p=0.007) and of the power-frequency-ratio (15s: p = 0.040; fatigue: p = 0.002) during HIMA and a higher power in the range of 8 to 15 Hz during PIMA (15s: p=0.001; fatigue: p=0.011). MMGtri and MTGtri showed no significant differences.Based on the findings it is suggested that a holding and a pushing isometric muscle action can be distinguished objectively, whereby a more complex neural control is assumed for HIMA.

Activation of metabotropic glutamate receptors increase the frequency of spontaneous GABAergic currents through protein kinase A in neonatal rat hippocampal neurons

1995 ◽  
Vol 74 (3) ◽  
pp. 1118-1122 ◽  
Author(s):  
M. Sciancalepore ◽  
F. Stratta ◽  
N. D. Fisher ◽  
E. Cherubini
Keyword(s):  
Protein Kinase ◽  
Protein Kinase A ◽  
Frequency Ratio ◽  
Hippocampal Neurons ◽  
Neonatal Rat ◽  
Synaptic Currents ◽  
Mean Frequency ◽  
Metabotropic Glutamate ◽  
The Mean ◽  
Kinase A

1. The tight-seal whole cell recording technique was used to study the effects of the metabotropic glutamate receptor (mGluR) agonist, trans-1-aminocyclopentane-1,3-dicarboxylic acid (t-ACPD) on spontaneous gamma-aminobutyric acid (GABA)-mediated synaptic currents in neonatal rat CA1 hippocampal neurons in slices obtained from postnatal (P) days P6-P12. 2. Bath application of t-ACPD (3-30 microM), in the presence of kynurenic acid, induced a concentration-dependent increase in frequency but not in amplitude of spontaneous GABAergic currents. The mean frequency ratio (t-ACPD 10 microM over control) was 2.6 +/- 1 (mean +/- SD), whereas the mean amplitude ratio was 1.1 +/- 0.3. 3. The effect of t-ACPD was partially antagonized by the mGluR antagonist (RS)-alpha-methyl-4-carboxyphenylglycine (MCPG, 1 mM). 4. t-ACPD (10-30 microM) did not modify the frequency of miniature GABAergic synaptic currents recorded in tetrodotoxin (the mean frequency ratio of t-ACPD over control was 0.7 +/- 0.3). 5. Forskolin (30 microM), but not its analogue 1,9 dideoxyforskolin (30 microM), mimicked the effect of t-ACPD. Similar effects were obtained with 3-isobutyl-1-methylxanthine (IBMX, 200 microM). 6. The potentiating effect of t-ACPD on spontaneous GABAergic currents was prevented by Rp-cAMPS (30 microM), a specific antagonist of protein kinase A. This suggests that mGluRs localized at the soma-dendritic level of GABAergic interneurons and positively coupled to cyclic AMP may modulate GABA release during a critical period of postnatal development.

scholarly journals Mechanomyography and acceleration show interlimb asymmetries in Parkinson patients without tremor compared to controls during a unilateral motor task

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Laura V. Schaefer ◽  
Nils Löffler ◽  
Julia Klein ◽  
Frank N. Bittmann
Keyword(s):  
Frequency Ratio ◽  
Biceps Brachii ◽  
Motor Task ◽  
Piezoelectric Sensor ◽  
Oscillatory Behavior ◽  
Variation Coefficient ◽  
Amplitude Variation ◽  
Mean Frequency ◽  
Power Frequency ◽  
The Mean

AbstractThe mechanical muscular oscillations are rarely the objective of investigations regarding the identification of a biomarker for Parkinson’s disease (PD). Therefore, the aim of this study was to investigate whether or not this specific motor output differs between PD patients and controls. The novelty is that patients without tremor are investigated performing a unilateral isometric motor task. The force of armflexors and the forearm acceleration (ACC) were recorded as well as the mechanomyography of the biceps brachii (MMGbi), brachioradialis (MMGbra) and pectoralis major (MMGpect) muscles using a piezoelectric-sensor-based system during a unilateral motor task at 70% of the MVIC. The frequency, a power-frequency-ratio, the amplitude variation, the slope of amplitudes and their interlimb asymmetries were analysed. The results indicate that the oscillatory behavior of muscular output in PD without tremor deviates from controls in some parameters: Significant differences appeared for the power-frequency-ratio (p = 0.001, r = 0.43) and for the amplitude variation (p = 0.003, r = 0.34) of MMGpect. The interlimb asymmetries differed significantly concerning the power-frequency-ratio of MMGbi (p = 0.013, r = 0.42) and MMGbra (p = 0.048, r = 0.39) as well as regarding the mean frequency (p = 0.004, r = 0.48) and amplitude variation of MMGpect (p = 0.033, r = 0.37). The mean (M) and variation coefficient (CV) of slope of ACC differed significantly (M: p = 0.022, r = 0.33; CV: p = 0.004, r = 0.43). All other parameters showed no significant differences between PD and controls. It remains open, if this altered mechanical muscular output is reproducible and specific for PD.

scholarly journals Quality Control in 3D Printing: Accuracy Analysis of 3D-Printed Models of Patient-Specific Anatomy

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1021
Author(s):  
Bernhard Dorweiler ◽  
Pia Elisabeth Baqué ◽  
Rayan Chaban ◽  
Ahmed Ghazy ◽  
Oroa Salem
Keyword(s):  
Wall Thickness ◽  
Large Scale ◽  
Fused Deposition Modeling ◽  
Vascular Anatomy ◽  
3D Models ◽  
Patient Specific ◽  
Stl File ◽  
Fused Deposition ◽  
3D Printed ◽  
The Mean

As comparative data on the precision of 3D-printed anatomical models are sparse, the aim of this study was to evaluate the accuracy of 3D-printed models of vascular anatomy generated by two commonly used printing technologies. Thirty-five 3D models of large (aortic, wall thickness of 2 mm, n = 30) and small (coronary, wall thickness of 1.25 mm, n = 5) vessels printed with fused deposition modeling (FDM) (rigid, n = 20) and PolyJet (flexible, n = 15) technology were subjected to high-resolution CT scans. From the resulting DICOM (Digital Imaging and Communications in Medicine) dataset, an STL file was generated and wall thickness as well as surface congruency were compared with the original STL file using dedicated 3D engineering software. The mean wall thickness for the large-scale aortic models was 2.11 µm (+5%), and 1.26 µm (+0.8%) for the coronary models, resulting in an overall mean wall thickness of +5% for all 35 3D models when compared to the original STL file. The mean surface deviation was found to be +120 µm for all models, with +100 µm for the aortic and +180 µm for the coronary 3D models, respectively. Both printing technologies were found to conform with the currently set standards of accuracy (<1 mm), demonstrating that accurate 3D models of large and small vessel anatomy can be generated by both FDM and PolyJet printing technology using rigid and flexible polymers.

scholarly journals Relationship between large-scale ionospheric field-aligned currents and electron/ion precipitations: DMSP observations

2020 ◽  
Vol 72 (1) ◽  
Author(s):  
Chao Xiong ◽  
Claudia Stolle ◽  
Patrick Alken ◽  
Jan Rauberg
Keyword(s):  
Time Distribution ◽  
Large Scale ◽  
Particle Flux ◽  
Particle Energy ◽  
Lower Latitude ◽  
Particle Precipitation ◽  
Data Set ◽  
The Mean ◽  
Two Parameters ◽  
Meteorological Satellite

Abstract In this study, we have derived field-aligned currents (FACs) from magnetometers onboard the Defense Meteorological Satellite Project (DMSP) satellites. The magnetic latitude versus local time distribution of FACs from DMSP shows comparable dependences with previous findings on the intensity and orientation of interplanetary magnetic field (IMF) By and Bz components, which confirms the reliability of DMSP FAC data set. With simultaneous measurements of precipitating particles from DMSP, we further investigate the relation between large-scale FACs and precipitating particles. Our result shows that precipitation electron and ion fluxes both increase in magnitude and extend to lower latitude for enhanced southward IMF Bz, which is similar to the behavior of FACs. Under weak northward and southward Bz conditions, the locations of the R2 current maxima, at both dusk and dawn sides and in both hemispheres, are found to be close to the maxima of the particle energy fluxes; while for the same IMF conditions, R1 currents are displaced further to the respective particle flux peaks. Largest displacement (about 3.5°) is found between the downward R1 current and ion flux peak at the dawn side. Our results suggest that there exists systematic differences in locations of electron/ion precipitation and large-scale upward/downward FACs. As outlined by the statistical mean of these two parameters, the FAC peaks enclose the particle energy flux peaks in an auroral band at both dusk and dawn sides. Our comparisons also found that particle precipitation at dawn and dusk and in both hemispheres maximizes near the mean R2 current peaks. The particle precipitation flux maxima closer to the R1 current peaks are lower in magnitude. This is opposite to the known feature that R1 currents are on average stronger than R2 currents.

scholarly journals Improved Visual Localization via Graph Filtering

2021 ◽  
Vol 7 (2) ◽  
pp. 20
Author(s):  
Carlos Lassance ◽  
Yasir Latif ◽  
Ravi Garg ◽  
Vincent Gripon ◽  
Ian Reid
Keyword(s):  
Image Retrieval ◽  
Large Scale ◽  
Visual Localization ◽  
Localization Accuracy ◽  
Additional Information ◽  
Feature Representations ◽  
The Mean ◽  
Classical Image ◽  
Vision Based Localization ◽  
Improve Reliability

Vision-based localization is the problem of inferring the pose of the camera given a single image. One commonly used approach relies on image retrieval where the query input is compared against a database of localized support examples and its pose is inferred with the help of the retrieved items. This assumes that images taken from the same places consist of the same landmarks and thus would have similar feature representations. These representations can learn to be robust to different variations in capture conditions like time of the day or weather. In this work, we introduce a framework which aims at enhancing the performance of such retrieval-based localization methods. It consists in taking into account additional information available, such as GPS coordinates or temporal proximity in the acquisition of the images. More precisely, our method consists in constructing a graph based on this additional information that is later used to improve reliability of the retrieval process by filtering the feature representations of support and/or query images. We show that the proposed method is able to significantly improve the localization accuracy on two large scale datasets, as well as the mean average precision in classical image retrieval scenarios.

scholarly journals Mesoscale Features Associated with Tropical Cyclone Formations in the Western North Pacific

2008 ◽  
Vol 136 (6) ◽  
pp. 2006-2022 ◽  
Author(s):  
Cheng-Shang Lee ◽  
Kevin K. W. Cheung ◽  
Jenny S. N. Hui ◽  
Russell L. Elsberry
Keyword(s):  
Tropical Cyclone ◽  
North Pacific ◽  
Western North Pacific ◽  
Large Scale ◽  
North Pacific Ocean ◽  
Deep Convection ◽  
Mesoscale Convective System ◽  
Convective System ◽  
Synoptic Patterns ◽  
The Mean

Abstract The mesoscale features of 124 tropical cyclone formations in the western North Pacific Ocean during 1999–2004 are investigated through large-scale analyses, satellite infrared brightness temperature (TB), and Quick Scatterometer (QuikSCAT) oceanic wind data. Based on low-level wind flow and surge direction, the formation cases are classified into six synoptic patterns: easterly wave (EW), northeasterly flow (NE), coexistence of northeasterly and southwesterly flow (NE–SW), southwesterly flow (SW), monsoon confluence (MC), and monsoon shear (MS). Then the general convection characteristics and mesoscale convective system (MCS) activities associated with these formation cases are studied under this classification scheme. Convection processes in the EW cases are distinguished from the monsoon-related formations in that the convection is less deep and closer to the formation center. Five characteristic temporal evolutions of the deep convection are identified: (i) single convection event, (ii) two convection events, (iii) three convection events, (iv) gradual decrease in TB, and (v) fluctuating TB, or a slight increase in TB before formation. Although no dominant temporal evolution differentiates cases in the six synoptic patterns, evolutions ii and iii seem to be the common routes taken by the monsoon-related formations. The overall percentage of cases with MCS activity at multiple times is 63%, and in 35% of cases more than one MCS coexisted. Most of the MC and MS cases develop multiple MCSs that lead to several episodes of deep convection. These two patterns have the highest percentage of coexisting MCSs such that potential interaction between these systems may play a role in the formation process. The MCSs in the monsoon-related formations are distributed around the center, except in the NE–SW cases in which clustering of MCSs is found about 100–200 km east of the center during the 12 h before formation. On average only one MCS occurs during an EW formation, whereas the mean value is around two for the other monsoon-related patterns. Both the mean lifetime and time of first appearance of MCS in EW are much shorter than those developed in other synoptic patterns, which indicates that the overall formation evolution in the EW case is faster. Moreover, this MCS is most likely to be found within 100 km east of the center 12 h before formation. The implications of these results to internal mechanisms of tropical cyclone formation are discussed in light of other recent mesoscale studies.

scholarly journals Well-Being of Healthcare Workers and the General Public during the COVID-19 Pandemic in Vietnam: An Online Survey

2021 ◽  
Vol 18 (9) ◽  
pp. 4737
Author(s):  
Tuyen Dinh Hoang ◽  
Robert Colebunders ◽  
Joseph Nelson Siewe Fodjo ◽  
Nhan Phuc Thanh Nguyen ◽  
Trung Dinh Tran ◽  
...  
Keyword(s):  
Healthcare Workers ◽  
Large Scale ◽  
Online Survey ◽  
Preventive Measures ◽  
Vaccine Coverage ◽  
Health Sector ◽  
Well Being ◽  
Multivariate Logistic Regression Model ◽  
The Mean ◽  
Restrictive Measures

The COVID-19 pandemic and associated restrictive measures implemented may considerably affect people’s lives. This study aimed to assess the well-being of Vietnamese people after COVID-19 lockdown measures were lifted and life gradually returned to normal. An online survey was organized from 21 to 25 April 2020 among Vietnamese residents aged 18 and over. The survey was launched by the Hue University of Medicine and Pharmacy. The WHO-5 Well-Being Index (scored 0–25) was used to score participants’ well-being. A multivariate logistic regression model was used to determine the predictors of well-being. A total of 1922 responses were analyzed (mean age: 31 years; 30.5% male; 88.2% health professionals or students in the health sector). The mean well-being score was 17.35 ± 4.97. Determinants of a high well-being score (≥13) included older age, eating healthy food, practicing physical exercise, working from home, and adhering to the COVID-19 preventive measures. Female participants, persons worried about their relatives’ health, and smokers were more likely to have a low well-being score. In conclusion, after the lockdown measures were lifted, the Vietnamese have people continued to follow COVID-19 preventive measures, and most of them scored high on the well-being scale. Waiting to achieve large-scale COVID-19 vaccine coverage, promoting preventive COVID-19 measures remains important, together with strategies to guarantee the well-being of the Vietnamese people.

scholarly journals Instability wave models for the near-field fluctuations of turbulent jets

2011 ◽  
Vol 689 ◽  
pp. 97-128 ◽  
Author(s):  
K. Gudmundsson ◽  
Tim Colonius
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Microphone Array ◽  
Near Field ◽  
Turbulent Jets ◽  
Instability Wave ◽  
Mean Flow ◽  
Velocity Fluctuations ◽  
The Mean ◽  
Scale Structures

AbstractPrevious work has shown that aspects of the evolution of large-scale structures, particularly in forced and transitional mixing layers and jets, can be described by linear and nonlinear stability theories. However, questions persist as to the choice of the basic (steady) flow field to perturb, and the extent to which disturbances in natural (unforced), initially turbulent jets may be modelled with the theory. For unforced jets, identification is made difficult by the lack of a phase reference that would permit a portion of the signal associated with the instability wave to be isolated from other, uncorrelated fluctuations. In this paper, we investigate the extent to which pressure and velocity fluctuations in subsonic, turbulent round jets can be described aslinearperturbations to the mean flow field. The disturbances are expanded about the experimentally measured jet mean flow field, and evolved using linear parabolized stability equations (PSE) that account, in an approximate way, for the weakly non-parallel jet mean flow field. We utilize data from an extensive microphone array that measures pressure fluctuations just outside the jet shear layer to show that, up to an unknown initial disturbance spectrum, the phase, wavelength, and amplitude envelope of convecting wavepackets agree well with PSE solutions at frequencies and azimuthal wavenumbers that can be accurately measured with the array. We next apply the proper orthogonal decomposition to near-field velocity fluctuations measured with particle image velocimetry, and show that the structure of the most energetic modes is also similar to eigenfunctions from the linear theory. Importantly, the amplitudes of the modes inferred from the velocity fluctuations are in reasonable agreement with those identified from the microphone array. The results therefore suggest that, to predict, with reasonable accuracy, the evolution of the largest-scale structures that comprise the most energetic portion of the turbulent spectrum of natural jets, nonlinear effects need only be indirectly accounted for by considering perturbations to the mean turbulent flow field, while neglecting any non-zero frequency disturbance interactions.

scholarly journals On interpreting studies of tracer transport by deep cumulus convection and its effects on atmospheric chemistry

2008 ◽  
Vol 8 (20) ◽  
pp. 6037-6050 ◽  
Author(s):  
M. G. Lawrence ◽  
M. Salzmann
Keyword(s):  
Atmospheric Chemistry ◽  
Large Scale ◽  
Deep Convection ◽  
Convective Transport ◽  
Advective Transport ◽  
Tracer Transport ◽  
Transport Models ◽  
Mass Fluxes ◽  
Split Treatment ◽  
The Mean

Abstract. Global chemistry-transport models (CTMs) and chemistry-GCMs (CGCMs) generally simulate vertical tracer transport by deep convection separately from the advective transport by the mean winds, even though a component of the mean transport, for instance in the Hadley and Walker cells, occurs in deep convective updrafts. This split treatment of vertical transport has various implications for CTM simulations. In particular, it has led to a misinterpretation of several sensitivity simulations in previous studies in which the parameterized convective transport of one or more tracers is neglected. We describe this issue in terms of simulated fluxes and fractions of these fluxes representing various physical and non-physical processes. We then show that there is a significant overlap between the convective and large-scale mean advective vertical air mass fluxes in the CTM MATCH, and discuss the implications which this has for interpreting previous and future sensitivity simulations, as well as briefly noting other related implications such as numerical diffusion.

Sign in / Sign up

Export Citation Format

Share Document