MEASUREMENT OF THE COMPLEX DIELECTRIC CONSTANT OF LIQUIDS AT CENTIMETER AND MILLIMETER WAVELENGTHS

1957 ◽  
Vol 35 (9) ◽  
pp. 995-1003 ◽  
Author(s):  
A. G. Mungall ◽  
John Hart
Keyword(s):  
Dielectric Constant ◽  
Methyl Alcohol ◽  
Free Space ◽  
Normal Incidence ◽  
Complex Dielectric Constant ◽  
Families Of Curves ◽  
Millimeter Wavelengths ◽  
Centimeter Wave ◽  
Space Technique ◽  
Wave Region

The measurement of the complex dielectric constant of lossy liquids in the millimeter and centimeter wave region by a free-space technique is described. The method involves the measurement of absorption per wavelength and of reflectance at normal incidence. Families of curves are given for the relations between these two quantities and the real and imaginary parts of the complex dielectric constant. Results for ethyl and methyl alcohol at 9 and 13 mm. wavelength are compared with those obtained by waveguide techniques.

MEASUREMENT OF THE DIELECTRIC PROPERTIES OF LOW LOSS MATERIALS AT MILLIMETER WAVELENGTHS

1958 ◽  
Vol 36 (12) ◽  
pp. 1672-1677
Author(s):  
A. G. Mungall
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Loss Tangent ◽  
Dielectric Loss Tangent ◽  
Brewster Angle ◽  
Angle Of Incidence ◽  
Low Loss ◽  
Millimeter Wavelengths ◽  
Space Technique

Measurement at millimeter wavelengths of the dielectric properties of low loss materials by a free space technique is described. The dielectric constant is determined from the Brewster angle, and the dielectric loss tangent from the attenuation coefficient measured at the Brewster angle of incidence. Results are given for bakelite at wavelengths between 5 and 10 mm. Details of the instrument, which was specifically designed for these measurements, are also given.

Development of a Capacitor Probe to Detect Subsurface Deterioration in Concrete

1997 ◽  
Vol 503 ◽  
Author(s):  
B. K. Diefenderfer ◽  
I. L. Al-Qadi ◽  
J. J. Yoho ◽  
S. M. Riad ◽  
A. Loulizi
Keyword(s):  
Dielectric Constant ◽  
Portland Cement ◽  
Electromagnetic Waves ◽  
Low Cost ◽  
Complex Dielectric Constant ◽  
Life Cycle Costs ◽  
Parallel Plates ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Set Up

ABSTRACTPortland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage, or chloride presence) can lead to significant reductions in maintenance costs. However, it is often too late to perform low-cost preventative maintenance by the time deterioration becomes evident. By developing techniques that would enable civil engineers to evaluate PCC structures and detect deterioration at early stages (without causing further damage), optimization of life-cycle costs of the constructed facility and minimization of disturbance to the facility users can be achieved.Nondestructive evaluation (NDE) methods are potentially one of the most useful techniques ever developed for assessing constructed facilities. They are noninvasive and can be performed rapidly. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant. The real part of the dielectric constant depicts the velocity of electromagnetic waves in PCC. The imaginary part, termed the “loss factor,” describes the conductivity of PCC and the attenuation of electromagnetic waves.Dielectric properties of PCC have been investigated in a laboratory setting using a parallel plate capacitor operating in the frequency range of 0.1 to 40.1MIHz. This capacitor set-up consists of two horizontal-parallel plates with an adjustable separation for insertion of a dielectric specimen (PCC). While useful in research, this approach is not practical for field implementation. A new capacitor probe has been developed which consists of two plates, located within the same horizontal plane, for placement upon the specimen to be tested. Preliminary results show that this technique is feasible and results are promising; further testing and evaluation is currently underway.

Normal Incidence Free Space Optical Data Porting to Embedded Communication Links

2008 ◽  
Vol 31 (1) ◽  
pp. 32-38 ◽  
Author(s):  
Michael E. Teitelbaum ◽  
Shridhar Yarlagadda ◽  
Daniel J. O'Brien ◽  
Eric D. Wetzel ◽  
Keith W. Goossen
Keyword(s):  
Free Space ◽  
Normal Incidence ◽  
Optical Data ◽  
Free Space Optical ◽  
Communication Links

scholarly journals Characteristics of Poly(vinyl Alcohol) (PVA) Based Composites Integrated with Green Synthesized Al3+-Metal Complex: Structural, Optical, and Localized Density of State Analysis

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1316
Author(s):  
Shujahadeen B. Aziz ◽  
Muaffaq M. Nofal ◽  
Hewa O. Ghareeb ◽  
Elham M. A. Dannoun ◽  
Sarkawt A. Hussen ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Refractive Index ◽  
Metal Complex ◽  
Band Gap ◽  
Optical Band Gap ◽  
Complex Dielectric Constant ◽  
Poly Vinyl Alcohol ◽  
Optical Parameters ◽  
Dispersion Energy ◽  
Casting Technique

The influence of dispersing Al-metal complex on the optical properties of PVA was investigated using UV–visible spectroscopy. Polymer composite films with various Al3+-complex amounts in the PVA matrix were arranged by solution casting technique by means of distilled water as a widespread solvent. The formation of Al3+-metal complex was verified through Ultraviolet–visible (UV-Vis) and Fourier-transform infrared spectroscopy (FTIR) examinations. The addition of Al-complex into the polymer matrix led to the recovery of the optical parameters such as dielectric constant (εr and εi) and refractive index (n). The variations of real and imaginary parts of complex dielectric constant as a function of photon wavelength were studied to calculate localized charge density values (N/m*), high-frequency dielectric constant, relaxation time, optical mobility, optical resistivity, and plasma angular frequency (ωp) of electrons. In proportion with Al3+-complex content, the N/m* values were amplified from 3.68 × 1055 kg−1 m−3 to 109 × 1055 kg−1 m−3. The study of optical parameters may find applications within optical instrument manufacturing. The optical band gap was determined from Tauc’s equation, and the type of electronic transition was specified. A remarkable drop in the optical band gap was observed. The dispersion of static refractive index (no) of the prepared composites was analyzed using the theoretical Wemple–DiDomenico single oscillator model. The average oscillator energy (Eo) and oscillator dispersion energy (Ed) parameters were estimated.

Sign in / Sign up

Export Citation Format

Share Document