The filamins: properties and functions

1985 ◽  
Vol 63 (6) ◽  
pp. 397-413 ◽  
Author(s):  
Robert R. Weihing
Keyword(s):  
Actin Filaments ◽  
Critical Concentration ◽  
Three Dimensional ◽  
Actin Binding ◽  
Relative Mass ◽  
Cross Link ◽  
Homologous Proteins ◽  
Molar Ratios ◽  
Gelation Concentration

The filamins are a group of homologous proteins defined by their high native molecular weight (500 000), their amino acid compositions, their cross-reactivity to antibodies to heterologous filamins, their localization to actin networks and bundles in situ, and their ability to cross-link actin filaments in vitro into three-dimensional networks and bundles. Native filamins contain two subunits (relative mass = 250 000). Each subunit carries at least one actin-binding site and formation of bivalent dimers is therefore believed to explain filamin's ability to cross-link actin filaments. Formation of networks in vitro (corresponding to formation of macroscopic gels) has been analyzed using the theory of Flory. As predicted, a sharp transition to gel (at the critical gelation concentration of filamin) is observed when actin is mixed with increasing concentrations of filamin and the critical gelation concentration is found to vary inversely with the length of actin filaments. However, the measured values of the critical gelation concentration are all higher (2- to 14-fold) than predicted by the theory and the prediction that the critical concentration varies directly with the actin concentration was verified with only one of two techniques used. Filamin's length (160–190 nm) and flexibility (1000-fold greater than actin filaments) may make it especially well fitted to cross-link actin filaments into three-dimensional networks when present in low molar ratios (1:200 to 1:50) relative to actin. At higher molar ratios (> 1:20) it also cross-links actin filaments into bundles. Assuming that filamin actually helps organize supramolecular structures inside cells (not yet tested directly), then its concentration relative to actin may help determine whether networks or bundles are formed. Other factors that may influence its localization and function inside cells include competition with other actin-binding proteins (such as myosin and tropomyosin) for binding sites on actin and phosphorylation, which may alter its ability to bind to actin.

scholarly journals Microheterogeneity of actin gels formed under controlled linear shear.

1988 ◽  
Vol 107 (4) ◽  
pp. 1477-1487 ◽  
Author(s):  
J D Cortese ◽  
C Frieden
Keyword(s):  
Spatial Heterogeneity ◽  
Diffusion Coefficients ◽  
Fluorescence Polarization ◽  
Actin Filaments ◽  
Three Dimensional ◽  
Actin Binding ◽  
Plasma Gelsolin ◽  
Shear Rates ◽  
Molar Ratios ◽  
Linear Shear

The diffusion coefficients and fluorescence polarization properties of actin subjected to a known shear have been determined both during and after polymerization, using a modification of a cone-plate Wells-Brookfield rheometer that allows monitoring of samples with an epifluorescence microscope. Fluorescence polarization and fluorescence photobleaching recovery experiments using rhodamine-labeled actin as a tracer showed that under conditions of low shear (shear rates of 0.05 s-1), a spatial heterogeneity of polymerized actin was observed with respect to fluorescence intensity and the diffusion coefficients with actin mobility becoming quite variable in different regions of the sample. In addition, complex changes in fluorescence polarization were noted after stopping the shear. Actin filaments of controlled length were obtained using plasma gelsolin (gelsolin/actin molar ratios of 1:50 to 1:300). At ratios of 1:50, neither spatial heterogeneity nor changes in polarization were observed on subjecting the polymerized actin to shear. At ratios of approximately 1:100, a decrease on the intensity of fluorescence polarization occurs on stopping the shear. Longer filaments exhibit spatial micro-heterogeneity and complex changes in fluorescence polarization. In addition, at ratios of 1:100 or 1:300, the diffusion coefficient decreases as the total applied shear increased. This behavior is interpreted as bundling of filaments aligned under shear. We also find that the F-actin translational diffusion coefficients decrease as the total applied shear increases (shear rates between 0.05 and 12.66 s-1), as expected for a cumulative process. When chicken gizzard filamin was added to gelsolin-actin filaments (at filamin/actin molar ratios of 1:300 to 1:10), a similar decrease in the diffusion coefficients was observed for unsheared samples. Spatial microheterogeneity might be related to the effects of the shear field in the alignment of filaments, and the balance between a three-dimensional network and a microheterogeneous system (containing bundles or anisotropic phases) appears related to both shear and the presence of actin-binding proteins.

scholarly journals Determination of the alpha-actinin-binding site on actin filaments by cryoelectron microscopy and image analysis.

1994 ◽  
Vol 126 (2) ◽  
pp. 433-443 ◽  
Author(s):  
A McGough ◽  
M Way ◽  
D DeRosier
Keyword(s):  
Image Analysis ◽  
Smooth Muscle ◽  
Binding Sites ◽  
Actin Filaments ◽  
Three Dimensional ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Outer Face ◽  
Actin Binding Domain

The three-dimensional structure of actin filaments decorated with the actin-binding domain of chick smooth muscle alpha-actinin (alpha A1-2) has been determined to 21-A resolution. The shape and location of alpha A1-2 was determined by subtracting maps of F-actin from the reconstruction of decorated filaments. alpha A1-2 resembles a bell that measures approximately 38 A at its base and extends 42 A from its base to its tip. In decorated filaments, the base of alpha A1-2 is centered about the outer face of subdomain 2 of actin and contacts subdomain 1 of two neighboring monomers along the long-pitch (two-start) helical strands. Using the atomic model of F-actin (Lorenz, M., D. Popp, and K. C. Holmes. 1993. J. Mol. Biol. 234:826-836.), we have been able to test directly the likelihood that specific actin residues, which have been previously identified by others, interact with alpha A1-2. Our results indicate that residues 86-117 and 350-375 comprise distinct binding sites for alpha-actinin on adjacent actin monomers.

scholarly journals Myosin and gelsolin cooperate in actin filament severing and actomyosin motor activity

2020 ◽  
pp. jbc.RA120.015863
Author(s):  
Venukumar Vemula ◽  
Tamás Huber ◽  
Marko Ušaj ◽  
Beáta Bugyi ◽  
Alf Mansson
Keyword(s):  
Motor Activity ◽  
Actin Filament ◽  
Single Molecule ◽  
Actin Filaments ◽  
Actin Binding ◽  
In Vitro Motility Assay ◽  
Cooperative Effects ◽  
Myosin Motor ◽  
Filament Dynamics

Actin is a major intracellular protein with key functions in cellular motility, signaling and structural rearrangements. Its dynamic behavior, such as polymerisation and depolymerisation of actin filaments in response to intra- and extracellular cues, is regulated by an abundance of actin binding proteins. Out of these, gelsolin is one of the most potent for filament severing. However, myosin motor activity also fragments actin filaments through motor induced forces, suggesting that these two proteins could cooperate to regulate filament dynamics and motility. To test this idea, we used an in vitro motility assay, where actin filaments are propelled by surface-adsorbed heavy meromyosin (HMM) motor fragments. This allows studies of both motility and filament dynamics using isolated proteins. Gelsolin, at both nanomolar and micromolar Ca2+ concentration, appreciably enhanced actin filament severing caused by HMM-induced forces at 1 mM MgATP, an effect that was increased at higher HMM motor density. This finding is consistent with cooperativity between actin filament severing by myosin-induced forces and by gelsolin. We also observed reduced sliding velocity of the HMM-propelled filaments in the presence of gelsolin, providing further support of myosin-gelsolin cooperativity. Total internal reflection fluorescence microscopy based single molecule studies corroborated that the velocity reduction was a direct effect of gelsolin-binding to the filament and revealed different filament severing pattern of stationary and HMM propelled filaments. Overall, the results corroborate cooperative effects between gelsolin-induced alterations in the actin filaments and changes due to myosin motor activity leading to enhanced F-actin severing of possible physiological relevance.

scholarly journals Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein.

1983 ◽  
Vol 96 (5) ◽  
pp. 1400-1413 ◽  
Author(s):  
R Niederman ◽  
P C Amrein ◽  
J Hartwig
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Three Dimensional ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Molar Ratio ◽  
Computer Assisted ◽  
Three Dimensional Structure ◽  
Actin Binding Protein ◽  
Critical Point Drying

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three-dimensional network resembling the peripheral cytoskeleton of motile cells.

scholarly journals Actin-depolymerizing Factor and Cofilin-1 Play Overlapping Roles in Promoting Rapid F-Actin Depolymerization in Mammalian Nonmuscle Cells

2005 ◽  
Vol 16 (2) ◽  
pp. 649-664 ◽  
Author(s):  
Pirta Hotulainen ◽  
Eija Paunola ◽  
Maria K. Vartiainen ◽  
Pekka Lappalainen
Keyword(s):  
Cell Motility ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Dynamics ◽  
Actin Binding ◽  
Actin Depolymerizing Factor ◽  
Cytoskeletal Dynamics ◽  
Nonmuscle Cells ◽  
In Cells

Actin-depolymerizing factor (ADF)/cofilins are small actin-binding proteins found in all eukaryotes. In vitro, ADF/cofilins promote actin dynamics by depolymerizing and severing actin filaments. However, whether ADF/cofilins contribute to actin dynamics in cells by disassembling “old” actin filaments or by promoting actin filament assembly through their severing activity is a matter of controversy. Analysis of mammalian ADF/cofilins is further complicated by the presence of multiple isoforms, which may contribute to actin dynamics by different mechanisms. We show that two isoforms, ADF and cofilin-1, are expressed in mouse NIH 3T3, B16F1, and Neuro 2A cells. Depleting cofilin-1 and/or ADF by siRNA leads to an accumulation of F-actin and to an increase in cell size. Cofilin-1 and ADF seem to play overlapping roles in cells, because the knockdown phenotype of either protein could be rescued by overexpression of the other one. Cofilin-1 and ADF knockdown cells also had defects in cell motility and cytokinesis, and these defects were most pronounced when both ADF and cofilin-1 were depleted. Fluorescence recovery after photobleaching analysis and studies with an actin monomer-sequestering drug, latrunculin-A, demonstrated that these phenotypes arose from diminished actin filament depolymerization rates. These data suggest that mammalian ADF and cofilin-1 promote cytoskeletal dynamics by depolymerizing actin filaments and that this activity is critical for several processes such as cytokinesis and cell motility.

scholarly journals Evidence for a Conformational Change in Actin Induced by Fimbrin (N375) Binding

1997 ◽  
Vol 139 (2) ◽  
pp. 387-396 ◽  
Author(s):  
Dorit Hanein ◽  
Paul Matsudaira ◽  
David J. DeRosier
Keyword(s):  
Actin Filaments ◽  
Structural Changes ◽  
Three Dimensional ◽  
Binding Domain ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Binding Surface ◽  
Actin Binding Domain ◽  
Actin Structure ◽  
Signal Transduction Proteins

Fimbrin belongs to a superfamily of actin cross-linking proteins that share a conserved 27-kD actin-binding domain. This domain contains a tandem duplication of a sequence that is homologous to calponin. Calponin homology (CH) domains not only cross-link actin filaments into bundles and networks, but they also bind intermediate filaments and some signal transduction proteins to the actin cytoskeleton. This fundamental role of CH domains as a widely used actin-binding domain underlines the necessity to understand their structural interaction with actin. Using electron cryomicroscopy, we have determined the three-dimensional structure of F-actin and F-actin decorated with the NH2-terminal CH domains of fimbrin (N375). In a difference map between actin filaments and N375-decorated actin, one end of N375 is bound to a concave surface formed between actin subdomains 1 and 2 on two neighboring actin monomers. In addition, a fit of the atomic model for the actin filament to the maps reveals the actin residues that line, the binding surface. The binding of N375 changes actin, which we interpret as a movement of subdomain 1 away from the bound N375. This change in actin structure may affect its affinity for other actin-binding proteins and may be part of the regulation of the cytoskeleton itself. Difference maps between actin and actin decorated with other proteins provides a way to look for novel structural changes in actin.

scholarly journals Nebulin Interacts with CapZ and Regulates Thin Filament Architecture within the Z-Disc

2008 ◽  
Vol 19 (5) ◽  
pp. 1837-1847 ◽  
Author(s):  
Christopher T. Pappas ◽  
Nandini Bhattacharya ◽  
John A. Cooper ◽  
Carol C. Gregorio
Keyword(s):  
Actin Filaments ◽  
Thin Filament ◽  
Actin Polymerization ◽  
Striated Muscle ◽  
Solid Phase ◽  
Molecular Model ◽  
Direct Interaction ◽  
Tryptophan Fluorescence ◽  
Actin Binding

The barbed ends of actin filaments in striated muscle are anchored within the Z-disc and capped by CapZ; this protein blocks actin polymerization and depolymerization in vitro. The mature lengths of the thin filaments are likely specified by the giant “molecular ruler” nebulin, which spans the length of the thin filament. Here, we report that CapZ specifically interacts with the C terminus of nebulin (modules 160–164) in blot overlay, solid-phase binding, tryptophan fluorescence, and SPOTs membrane assays. Binding of nebulin modules 160–164 to CapZ does not affect the ability of CapZ to cap actin filaments in vitro, consistent with our observation that neither of the two C-terminal actin binding regions of CapZ is necessary for its interaction with nebulin. Knockdown of nebulin in chick skeletal myotubes using small interfering RNA results in a reduction of assembled CapZ, and, strikingly, a loss of the uniform alignment of the barbed ends of the actin filaments. These data suggest that nebulin restricts the position of thin filament barbed ends to the Z-disc via a direct interaction with CapZ. We propose a novel molecular model of Z-disc architecture in which nebulin interacts with CapZ from a thin filament of an adjacent sarcomere, thus providing a structural link between sarcomeres.

scholarly journals Actin depolymerizing factor controls actin turnover and gliding motility in Toxoplasma gondii

2011 ◽  
Vol 22 (8) ◽  
pp. 1290-1299 ◽  
Author(s):  
Simren Mehta ◽  
L. David Sibley
Keyword(s):  
Toxoplasma Gondii ◽  
Actin Filaments ◽  
Gliding Motility ◽  
Conditional Knockout ◽  
Host Cells ◽  
Actin Binding ◽  
Actin Depolymerizing Factor

Apicomplexan parasites rely on actin-based gliding motility to move across the substratum, cross biological barriers, and invade their host cells. Gliding motility depends on polymerization of parasite actin filaments, yet ∼98% of actin is nonfilamentous in resting parasites. Previous studies suggest that the lack of actin filaments in the parasite is due to inherent instability, leaving uncertain the role of actin-binding proteins in controlling dynamics. We have previously shown that the single allele of Toxoplasma gondii actin depolymerizing factor (TgADF) has strong actin monomer–sequestering and weak filament-severing activities in vitro. Here we used a conditional knockout strategy to investigate the role of TgADF in vivo. Suppression of TgADF led to accumulation of actin-rich filaments that were detected by immunofluorescence and electron microscopy. Parasites deficient in TgADF showed reduced speed of motility, increased aberrant patterns of motion, and inhibition of sustained helical gliding. Lack of TgADF also led to severe defects in entry and egress from host cells, thus blocking infection in vitro. These studies establish that the absence of stable actin structures in the parasite are not simply the result of intrinsic instability, but that TgADF is required for the rapid turnover of parasite actin filaments, gliding motility, and cell invasion.

scholarly journals The toxofilin–actin–PP2C complex of Toxoplasma: identification of interacting domains

2007 ◽  
Vol 401 (3) ◽  
pp. 711-719 ◽  
Author(s):  
Gaelle Jan ◽  
Violaine Delorme ◽  
Violaine David ◽  
Celine Revenu ◽  
Angelita Rebollo ◽  
...  
Keyword(s):  
Protein Interactions ◽  
Actin Filaments ◽  
Function Analysis ◽  
Protozoan Parasite ◽  
Actin Binding ◽  
Protein Protein Interactions ◽  
The Third ◽  
Parasite Motility

Toxofilin is a 27 kDa protein isolated from the human protozoan parasite Toxoplasma gondii, which causes toxoplasmosis. Toxofilin binds to G-actin, and in vitro studies have shown that it controls elongation of actin filaments by sequestering actin monomers. Toxofilin affinity for G-actin is controlled by the phosphorylation status of its Ser53, which depends on the activities of a casein kinase II and a type 2C serine/threonine phosphatase (PP2C). To get insights into the functional properties of toxofilin, we undertook a structure–function analysis of the protein using a combination of biochemical techniques. We identified a domain that was sufficient to sequester G-actin and that contains three peptide sequences selectively binding to G-actin. Two of these sequences are similar to sequences present in several G- and F-actin-binding proteins, while the third appears to be specific to toxofilin. Additionally, we identified two toxofilin domains that interact with PP2C, one of which contains the Ser53 substrate. In addition to characterizing the interacting domains of toxofilin with its partners, the present study also provides information on an in vivo-based approach to selectively and competitively disrupt the protein–protein interactions that are important to parasite motility.

Sign in / Sign up

Export Citation Format

Share Document