Chromatography of heparin on Sepharose–lysine: molecular size fractionation and its relevance to thrombin and antithrombin III binding

1979 ◽  
Vol 57 (10) ◽  
pp. 1183-1190 ◽  
Author(s):  
M. W. C. Hatton ◽  
L. R. Berry ◽  
H. Kaur ◽  
A. Koj ◽  
E. Regoeczi
Keyword(s):  
Molecular Weight ◽  
Antithrombin Iii ◽  
Binding Capacity ◽  
Anticoagulant Activity ◽  
Average Molecular Weight ◽  
Molecular Size ◽  
Lysine Content ◽  
Heparin Binding ◽  
Significant Difference ◽  
Lysine Residues

Batches of Sepharose–lysine, which varied in lysine content from 35 to 430 μmol/g of dry gel, were prepared by varying the quantity of CNBr in the activation reaction. The batches were tested for heparin binding by using a controlled chromatographic procedure. Sepharose–lysine, containing < 150 μmol of lysine/g, did not significantly bind heparin whereas conjugates with > 400 μmol/g retained the entire heparin load. For intermediate batches of Sepharose–lysine (150–400 μmol/g) the quantity of heparin bound largely paralleled the lysine content. Thus, Sepharose–lysine of an intermediate lysine content separated heparin into an unretained fraction and a bound fraction which was recovered from the column by eluting with 1 M NaCl. On testing for anticoagulant activity by factor Xa inhibition assay, no significant difference in specific anticoagulant activity was observed between these heparin fractions and the heparin load. However, from gel filtration studies, a substantial difference in molecular size was noted. An unretained heparin fraction from Sepharose–lysine was of a lower average molecular weight than the parent heparin. In contrast, a retained heparin peak was of a higher average molecular weight compared with the parent heparin. These observations were confirmed by studying the chromatographic properties of low (10 000) and high (23 000) molecular weight heparin samples on various Sepharose–lysine batches. A model is proposed to explain this discriminating property of Sepharose–lysine. For a conjugate containing 400 μmol/g, the mean lysine spacing is calculated at 47 Å (1 Å = 0.1 nm), which is approximately equivalent to five to six disaccharide units in heparin.The property of Sepharose–lysine to bind heparin was compared with the affinities of the mucopolysaccharide for both thrombin and antithrombin III. Evidence has been proposed for the involvement of lysine residues of antithrombin III in this process. Our investigations suggest that lysine, in addition to arginine, groups of thrombin are also involved in heparin binding. By specifically modifying two to four lysine residues using nitrous acid, the heparin-binding capacity of the enzyme and its plasma clotting activity were largely destroyed, although the esterase activity was retained.

Comparison of the Non-Specific Binding of Unfractionated Heparin and Low Molecular Weight Heparin (Enoxaparin) to Plasma Proteins

1993 ◽  
Vol 70 (04) ◽  
pp. 625-630 ◽  
Author(s):  
Edward Young ◽  
Benilde Cosmi ◽  
Jeffrey Weitz ◽  
Jack Hirsh
Keyword(s):  
Molecular Weight ◽  
Unfractionated Heparin ◽  
Plasma Proteins ◽  
Low Molecular Weight Heparin ◽  
Specific Binding ◽  
Anticoagulant Activity ◽  
Factor Xa ◽  
Low Molecular Weight ◽  
Heparin Binding ◽  
Fixed Amount

SummaryThe non-specific binding of anticoagulantly-active heparin to plasma proteins may influence its anticoagulant effect. We used low affinity heparin (LAH) essentially devoid of anti-factor Xa activity to investigate the extent and possible mechanism of this non-specific binding. The addition of excess LAH to platelet-poor plasma containing a fixed amount of unfractionated heparin doubled the anti-factor Xa activity presumably because it displaces anticoagulantly-active heparin from plasma proteins. Although dextran sulfates of varying molecular weights also increased the anti-factor Xa activity, less sulfated heparin-like polysaccharides had no effect. These findings suggest that the ability to displace active heparin from plasma protein binding sites is related to charge and may be independent of molecular size. In contrast to its effect in plasma containing unfractionated heparin, there was little augmentation in anti-factor Xa activity when LAH was added to plasma containing low molecular weight heparin (LMWH), indicating that LMWH binds less to plasma proteins than unfractionated heparin. This concept is supported by studies comparing the anticoagulant activity of unfractionated heparin and LMWH in plasma with that in buffer containing antithrombin III. The anti-factor Xa activity of unfractionated heparin was 2-fold less in plasma than in the purified system. In contrast, LMWH had identical anti-factor Xa activity in both plasma and buffer, respectively. These findings may be clinically relevant because the recovered anti-factor Xa activity of unfractionated heparin was 33% lower in plasma from patients with suspected venous thrombosis than in plasma from healthy volunteers. The reduced heparin recovery in patient plasma reflects increased heparin binding to plasma proteins because the addition of LAH augmented the anti-factor Xa activity. In contrast to unfractionated heparin, there was complete recovery of LMWH added to patient plasma and little increase of anti-factor Xa activity after the addition of LAH. These findings may explain why LMWH gives a more predictable dose response than unfractionated heparin.

Characterisation of Persistent Anti-Xa Activity Following Administration of the Low Molecular Weight Heparin Enoxaparin Sodium (Clexane)

1994 ◽  
Vol 72 (02) ◽  
pp. 275-280 ◽  
Author(s):  
David Brieger ◽  
Joan Dawes
Keyword(s):  
Molecular Weight ◽  
Enoxaparin Sodium ◽  
Antithrombin Iii ◽  
Anticoagulant Activity ◽  
Active Material ◽  
Biologically Active ◽  
Size Exclusion ◽  
Low Molecular Weight ◽  
Exclusion Chromatography ◽  
Liver And Kidney

SummaryIt is widely reported that persistent anti-Xa activity follows administration of low molecular weight heparins. To identify the effectors of this activity we have injected 125I-labelled Enoxaparin sodium into rabbits and subsequently analysed the circulating radiolabelled material and anti-Xa activity by affinity and size exclusion chromatography. Antithrombin III-binding material derived from the injected drug was responsible for all the anti-Xa amidolytic activity. At early times after injection additional anticoagulant activity which was largely attributable to tissue factor pathway inhibitor was measured by the Heptest clotting assay after removal of glycosaminoglycans from plasma samples. Small radiolabelled fragments, including penta/hexasaccharide with affinity for antithrombin III, were detectable in the circulation 1 week later, and sulphated oligosaccharides persisted for 3-4 weeks. Significant quantities of radiolabel remained in the liver and kidney several weeks post-injection; these organs may sequester some of the injected drug and give rise to circulating biologically active material by degradation and secretion of catabolic products into the plasma.

scholarly journals Average molecular weight of surfactants in aerosols

2007 ◽  
Vol 7 (5) ◽  
pp. 13805-13838 ◽  
Author(s):  
M. T. Latif ◽  
P. Brimblecombe
Keyword(s):  
Molecular Weight ◽  
Surface Tension ◽  
Atmospheric Aerosols ◽  
Average Molecular Weight ◽  
Molecular Size ◽  
Weight Fraction ◽  
Ozone Exposure ◽  
Before And After ◽  
Fine Mode ◽  
Active Substances

Abstract. Surfactants in atmospheric aerosols determined as methylene blue active substances (MBAS) and ethyl violet active substances (EVAS). The MBAS and EVAS concentrations can be correlated with surface tension as determined by pendant drop analysis. The effect of surface tension was more clearly indicated in fine mode aerosol extracts. The concentration of MBAS and EVAS was determined before and after ultrafiltration analysis using AMICON centrifuge tubes that define a 5000 Da (5 K Da) nominal molecular weight fraction. Overall, MBAS and to a greater extent EVAS predominates in fraction with molecular weight below 5 K Da. In case of aerosols collected in Malaysia the higher molecular fractions tended to be a more predominant. The MBAS and EVAS are correlated with yellow to brown colours in aerosol extracts. Further experiments showed possible sources of surfactants (e.g. petrol soot, diesel soot) in atmospheric aerosols to yield material having molecular size below 5 K Da except for humic acid. The concentration of surfactants from these sources increased after ozone exposure and for humic acids it also general included smaller molecular weight surfactants.

A COMPARISON OF THE BINDING OF ANTITHROMBIN III AND HEPARIN COFACTOR II TO HEPARINS, NATURALLY OCCURRING GLYCOSAMINOGLYCANS AND OTHER SULPHATED POLYMERS

1987 ◽  
Author(s):  
J Dawes ◽  
D S Pepper
Keyword(s):  
Molecular Weight ◽  
Chain Length ◽  
Antithrombin Iii ◽  
Molar Ratio ◽  
Heparin Binding ◽  
Dextran Sulphate ◽  
Heparin Cofactor Ii ◽  
Wide Range ◽  
Pentosan Polysulphate ◽  
Binding Sequence

Antithrombin III (ATIII) and heparin cofactor II (HCII) are currently thought to be the most important protein mediators of the anticoagulant and antithrombotic activities of glycosamino-glycans. A simple, quantitative method for assessing the affinity of a protein for a sulphated polymer in the liquid phase, based on competition with immobilised heparin, has been developed. Using this technique, the binding of ATIII and HCII to a wide range of glycosaminoglycans and other sulphated polymers have been compared, and the contributions to binding of size, degree of sulphation and backbone structure of the polymers analysed.In the presence of the high protein concentrations found in plasma, unfractionated heparin inhibited the binding of ATIII to immobilised heparin with a Ki of 1 x 10-6. Binding was destroyed by N-desulphation. 1 Results with a range of low molecular weight (LMW) heparins and heparan sulphates are consistent with the view that they all contain the ATIII-binding sequence, but at a lower molar ratio than heparin. Highly sulphated synthetic polymers such as dextran sulphate bound ATIII by a different mechanism, which was molecular weight-dependent.The affinity of HCII for heparins increased markedly with heparin chain length. Binding was largely, but not entirely, mediated by sulphate residues. HCII bound to heparan and dermatan sulphates with lower affinities than to heparin, and to synthetic sulphated polymers with similar or higher affinities. Pentosan polysulphate (SP54) bound HCII as effectively as did heparin. Binding of HCII to dextran sulphate was highly dependent on molecular weight. The affinity of HCII for a sulphated polymer appears to depend both on its chain length and density of sulphation.Thus the profiles of binding of ATIII and HCII to glycosaminoglycans and other sulphated polymers are quite different. This technique is useful both for investigating the interactions of existing therapeutic anticoagulants and assessing new products.

scholarly journals Molecular Characterization of Arabinoxylan from Wheat Beer, Beer Foam and Defoamed Beer

Molecules ◽  
2019 ◽  
Vol 24 (7) ◽  
pp. 1230
Author(s):  
Jie Li ◽  
Jinhua Du
Keyword(s):  
Molecular Weight ◽  
Molecular Characterization ◽  
Average Molecular Weight ◽  
Monosaccharide Composition ◽  
Weight Average Molecular Weight ◽  
Substitution Degree ◽  
Significant Difference ◽  
Spherical Structures ◽  
Beer Foam

This research was to explore the distribution and some molecular characterization of arabinoxylan in wheat beer (B), beer foam (BF) and defoamed beer (DB) because of the crucial influences of arabinoxylan on wheat beer and its foam. The purified arabinoxylan from B, BF, and DB were fractionated by ethanol of 50%, 67%, 75%, and 80%. The monosaccharide composition, substitution degree (Ara/Xyl ratio, A/X), and average degrees of polymerization (avDP) of arabinoxylan were investigated. Molecular weight and microstructure were also involved in this study by GPC-LLS and SEM, respectively. Under the same ethanol concentration, the arabinoxylan content in the BF was higher than the other two, respectively, and it was precipitated in BF fraction with 50% ethanol which accounted for 80.84% of the total polysaccharides. Meanwhile, the greatest substitution degree (A/X) and highest value of avDP of the arabinoxylan was found in all beer foam fractions regardless of the concentration of ethanol used. The average degrees of polymerization (avDP) of arabinoxylan displayed a significant difference (p < 0.05) among B, BF, and DB. Furthermore, arabinoxylan presented varied microstructure with irregular lamellas and spherical structures and the weight-average molecular weight (Mw) of arabinoxylan showed the lowest values in BF, while the largest values were shown in DB. Therefore, arabinoxylan was more accumulated in beer foam, especially in 50% ethanol, characterised by greater value of A/X and avDP, as well as lower Mw. It was suggested that the arabinoxylan played important roles in maintaining wheat beer foam characteristics.

Isoprene and Rubber. Part 29. High Molecular Hydrorubbers

1932 ◽  
Vol 5 (2) ◽  
pp. 136-140
Author(s):  
H. Staudinger ◽  
W. Feisst
Keyword(s):  
Molecular Weight ◽  
Catalytic Reduction ◽  
Molecular Form ◽  
Average Molecular Weight ◽  
Molecular Size ◽  
Decomposition Products ◽  
Molecular Weights ◽  
Rubber Part ◽  
Derivatives Of ◽  
Suitable Process

Abstract The molecular concept in organic chemistry is based upon the fact that the molecules, whose existence is proved by vapor density determinations, enter into chemical reactions as the smallest particles. If now it is assumed that organic molecular colloids like rubber are dissolved in dilute solution in molecular form then it must be proved that in the chemical transposition of macromolecules as well no change in the size of the macromolecules occurs. In the case of hemicolloids, therefore for molecular colloids with an average molecular weight of 1000 to 10,000, this has been proved by the reduction of polyindenes, especially of polysterenes, to hydroproducts with the same average molecular weight, and also by the fact that cyclorubbers do not change their molecular weight upon autoöxidation. The molecular weights of hemi-colloidal hydrocarbons are therefore invariable. This is much more difficult to prove in the case of rubber, although there are many more ways in which unsaturated rubber can be transposed than the stable polysterenes, polyindenes, and poly cyclorubbers. In most of the reactions with rubber, as in its action with nitrosobenzene, oxidizing agents, hydrogen halides, and halogens, an extensive decomposition takes place as a result of the instability of the molecule, which is referred to in another work. Therefore derivatives of rubber are not formed, but derivatives of hemi-colloidal decomposition products. The catalytic reduction of rubber in the cold appears to be the most suitable process of making it react without changing its molecular size in order to prove that in a chemical transposition its molecular weight remains the same.

scholarly journals Mechanism of thrombin binding to endothelial cells

Blood ◽  
1983 ◽  
Vol 61 (2) ◽  
pp. 368-372 ◽  
Author(s):  
PT Bauer ◽  
R Machovich ◽  
P Aranyi ◽  
KG Buki ◽  
E Csonka ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Binding Sites ◽  
Antithrombin Iii ◽  
Affinity Binding ◽  
Heparin Binding ◽  
High Affinity Binding ◽  
Aortic Endothelial Cells ◽  
High Affinity ◽  
Lysine Residues ◽  
Two Populations

Abstract The interaction of human alpha-thrombin with mini-pig aortic endothelial cells was studied using 125I-labeled enzyme. Equilibrium between bound and free thrombin was attained within 1 min, and the Klotz-Hunston equations indicated two populations of binding sites. Approximately 30,000 sites/cell belonged to the high-affinity class with a Kd of about 3 x 10(-8) M. Modification of two lysine residues of thrombin with pyridoxal 5′-phosphate (PLP2-thrombin) destroyed the high- affinity binding and about three-fourths of the low-affinity bindings. When the lysine residue of thrombin involved in heparin binding was protected with heparin against chemical modification (PLP-thrombin), the modified enzyme remained similar to the native one with respect to cellular binding, with some loss of low-affinity binding only. Heparin, in a tenfold molar excess to enzyme, inhibited the binding of the native as well as the PLP-thrombin, whereas it did not influence the interaction between PLP2-thrombin and the cell. Since heparin might interfere with both the enzyme and the cell, the binding of heparin to endothelial cells was also examined. The results revealed that 3H- heparin also bound to cells. This binding was characterized by a Kd of 3 x 10(-7) M, approximately 10(6) sites/cell. Furthermore, thrombin bound to endothelial cells was released by antithrombin III. On the basis of these and other data in the literature, a model is proposed for the mechanism of the binding of thrombin to endothelial cells.

Isoprene and Rubber. XIX. The Molecular Size of Rubber and Balata

1930 ◽  
Vol 3 (3) ◽  
pp. 519-521 ◽  
Author(s):  
H. Staudinger ◽  
H. F. Bondy
Keyword(s):  
Molecular Weight ◽  
Organic Solvent ◽  
Average Molecular Weight ◽  
Molecular Size ◽  
Dilute Solution ◽  
Decomposition Products ◽  
Viscosity Measurements ◽  
Gutta Percha ◽  
Preceding Work

Abstract It was shown in the preceding work that a very dilute solution of balata in an organic solvent contains macromolecules in solution and not micelles. The same is true of rubber. On the basis of these findings it is possible to calculate the molecular weight of rubber and balata from viscosity measurements by means of the formula developed in a previous work: M=η8p/c. Km. The supposition is made that the molecules of rubber and balata have the form of threads and double threads, respectively. Also it is necessary to determine the constant KKm, and this may be calculated in the case of low molecular products, where the average molecular weight can be determined as well as the viscosity of the solutions. Such semi-colloidal decomposition products were obtained by heating rubber or gutta-percha in either tetralin or xylene. As shown by the following table the four samples thus obtained gave the constant: 0.3×10−3,5

Effects of the reduction and S-carbamidomethylation on the conformation, activity and heparin-binding capacity of human antithrombin III

1980 ◽  
Vol 624 (2) ◽  
pp. 386-396 ◽  
Author(s):  
Roland Einarsson ◽  
Ewa Jahr ◽  
Eva Stiber ◽  
Lena Engman ◽  
Henrik Lundström ◽  
...  
Keyword(s):  
Antithrombin Iii ◽  
Binding Capacity ◽  
Heparin Binding

The Additive Effect of Low Molecular Weight Heparins on Thrombin Inhibition by Dermatan Sulfate

1993 ◽  
Vol 70 (03) ◽  
pp. 443-447 ◽  
Author(s):  
Benilde Cosmi ◽  
Giancarlo Agnelli ◽  
Edward Young ◽  
Jack Hirsh ◽  
Jeffrey Weitz
Keyword(s):  
Molecular Weight ◽  
Antithrombin Iii ◽  
Dermatan Sulfate ◽  
Anticoagulant Activity ◽  
Additive Effect ◽  
Low Molecular Weight ◽  
Low Molecular Weight Heparins ◽  
Heparin Cofactor Ii ◽  
Thrombin Inhibition ◽  
Sds Page

SummaryThe aim of this study was to investigate the mechanism by which the anticoagulant activity of dermatan sulfate (DS) is increased by low molecular weight heparin (LMWH). In platelet poor plasma, LMWH enhances the effect of DS on thrombin (IIa) inhibition as determined by thrombin clotting times and with a chromogenic substrate assay. Analysis of the results of the chromogenic assays using either the algebraic fractional or the graphic isobole method suggests that LMWH has an additive effect on the anti-IIa activity of DS. This additive effect was lost when the experiments were repeated in plasma immunodepleted of antithrombin III (ATIII), indicating that the anti-IIa activity of LMWH is ATIII-dependent. To further explore the mechanism of the interaction between LMWH and DS, 125I-labeled IIa was added to plasma in the presence or absence of DS and/or LMWH and the formation of IIa-inhibitor complexes was assessed using SDS-PAGE followed by autoradiography. DS addition selectively increases the formation of heparin cofactor II (HCII)-IIa complexes, whereas LMWH enhances ATIII-IIa complex generation. Compared to plasma containing DS alone, the formation of ATIII-IIa complexes also is increased when the combination of DS and LMWH is added. These findings suggest that the additive effect of LMWH on the anti-IIa activity of DS reflects their different modes of IIa inhibition; DS potentiates IIa inhibition by HCII, while LMWH catalyses ATIII-dependent IIa inactivation. The potential clinical significance of these findings requires further investigation.

Sign in / Sign up

Export Citation Format

Share Document