Digestion of cell-wall monosaccharides of ryegrass and alfalfa hays by the ruminal bacteria Fibrobacter succinogenes and Butyrivibrio fibrisolvens

1993 ◽  
Vol 39 (8) ◽  
pp. 780-786 ◽  
Author(s):  
Joshua Miron ◽  
Daniel Ben-Ghedalia

The ruminal bacteria Fibrobacter succinogenes strains S85 and BL2 were grown in monocultures or in coculture with strain D1 of Butyrivibrio fibrisolvens, and the solubilization of ryegrass and alfalfa cell walls (CW) and digestion of CW monosaccharides were measured. Fibrobacter succinogenes monocultures and cocultures with B. fibrisolvens D1 degraded 58–69% of ryegrass CW, solubilizing 67–78% of CW glucose, 65–71% of CW xylose, 69–75% of hemicellulose, and 68–77% of total CW monosaccharides. When grown on alfalfa CW, those cultures degraded 28–39% of alfalfa CW, solubilizing 42–58% of CW glucose, 30–36% of CW xylose, and 37–45% of hemicellulose. With respect to both substrates, F. succinogenes strains solubilized CW carbohydrates better than did B. fibrisolvens D1. Complementary interaction between B. fibrisolvens D1 and the F. succinogenes strains was identified with respect to the utilization of some solubilized carbohydrates, but not with respect to the extent of CW solubilization, which was determined mainly by the F. succinogenes strains. For both substrates, utilization of solubilized cellulose by F. succinogenes monocultures was high (96–98%), whereas that of hemicellulose was lower (24–26% in ryegrass and 49–50% in alfalfa). Under scanning electron microscopy, F. succinogenes bacterial cells attached to and colonized on CW particles were characterized by the appearance of protuberant surface structures that we have identified as "polycellulosome complexes." Key words: cell wall monosaccharides, ryegrass, alfalfa, ruminal bacteria, Fibrobacter succinogenes, Butyrivibrio fibrisolvens.

2017 ◽  
Vol 23 (5) ◽  
pp. 1048-1054 ◽  
Author(s):  
Yunzhen Zheng ◽  
Daniel J. Cosgrove ◽  
Gang Ning

AbstractWe have used field emission scanning electron microscopy (FESEM) to study the high-resolution organization of cellulose microfibrils in onion epidermal cell walls. We frequently found that conventional “rule of thumb” conditions for imaging of biological samples did not yield high-resolution images of cellulose organization and often resulted in artifacts or distortions of cell wall structure. Here we detail our method of one-step fixation and dehydration with 100% ethanol, followed by critical point drying, ultrathin iridium (Ir) sputter coating (3 s), and FESEM imaging at a moderate accelerating voltage (10 kV) with an In-lens detector. We compare results obtained with our improved protocol with images obtained with samples processed by conventional aldehyde fixation, graded dehydration, sputter coating with Au, Au/Pd, or carbon, and low-voltage FESEM imaging. The results demonstrated that our protocol is simpler, causes little artifact, and is more suitable for high-resolution imaging of cell wall cellulose microfibrils whereas such imaging is very challenging by conventional methods.


1984 ◽  
Vol 30 (6) ◽  
pp. 857-863 ◽  
Author(s):  
J. J. Bozzola ◽  
R. J. Mehta ◽  
L. J. Nisbet ◽  
J. R. Valenta

Transmission (TEM) and scanning electron microscopy (SEM) of Candida albicans cultures treated with the cell wall active antibiotics aculeacin A and papulacandin B (10 μg/mL) revealed highly distorted, wrinkled, and collapsed cells. Dividing cells failed to separate properly and aggregates of enlarged and elongated forms were often seen. TEM sections revealed thick and layered cell walls in the treated cultures and bud cross walls failed to segregate completely. Approximately 20% of the cells demonstrated complete cell necrosis accompanied with cytoplasmic deterioration, layered and distorted walls, and improperly formed buds and scars.


1980 ◽  
Vol 26 (8) ◽  
pp. 965-970 ◽  
Author(s):  
Yvonne Koch ◽  
K. H. Rademacher

Candida albicans and Saccharomyces cerevisiae cells were examined by scanning electron microscopy before and after extraction of the mannans of the cell wall. The surfaces of control cells were smooth; after mannan extraction they were rough and showed erosions which were particularly striking within the area of the scars. Helicase digested irregular holes through the cell wall within 20 min; these increased in size during an additional 40 min of digestion. These holes were not localized in or on the bud scars, which remained intact even after the long digestion period. The results were used to construct a model for yeast cell wall structure.


1975 ◽  
Vol 23 (1) ◽  
pp. 95 ◽  
Author(s):  
SGM Carr ◽  
DJ Carr

Rows of pectic strands, each 0.3-0.4�m in diameter, are shown to connect palisade mesophyll cells in regular ladder-like configurations ('pectic scala'). These structures are illustrated in some species of eucalypts, but probably occur in other kinds of plants. Less regular wall filaments can be observed in the intercellular spaces between other types of cells. They are particularly numerous in the parenchyma of species of ferns. These filaments and the pectic scala are readily observable by scanning electron microscopy, but can also be seen in conventional preparations for the light microscope. The structure, formation, chemical composition and possible function of these and other kinds of cell wall protuberances, described in the literature, are discussed.


Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).


Author(s):  
Li Li-Sheng ◽  
L.F. Allard ◽  
W.C. Bigelow

The aromatic polyamides form a class of fibers having mechanical properties which are much better than those of aliphatic polyamides. Currently, the accepted morphology of these fibers as proposed by M.G. Dobb, et al. is a radial arrangement of pleated sheets, with the plane of the pleats parallel to the axis of the fiber. We have recently obtained evidence which supports a different morphology of this type of fiber, using ultramicrotomy and ion-thinning techniques to prepare specimens for transmission and scanning electron microscopy.


Author(s):  
M. K. Lamvik

When observing small objects such as cellular organelles by scanning electron microscopy, it is often valuable to use the techniques of transmission electron microscopy. The common practice of mounting and coating for SEM may not always be necessary. These possibilities are illustrated using vertebrate skeletal muscle myofibrils.Micrographs for this study were made using a Hitachi HFS-2 scanning electron microscope, with photographic recording usually done at 60 seconds per frame. The instrument was operated at 25 kV, with a specimen chamber vacuum usually better than 10-7 torr. Myofibrils were obtained from rabbit back muscle using the method of Zak et al. To show the component filaments of this contractile organelle, the myofibrils were partially disrupted by agitation in a relaxing medium. A brief centrifugation was done to clear the solution of most of the undisrupted myofibrils before a drop was placed on the grid. Standard 3 mm transmission electron microscope grids covered with thin carbon films were used in this study.


Author(s):  
S. E. Keckler ◽  
D. M. Dabbs ◽  
N. Yao ◽  
I. A. Aksay

Cellular organic structures such as wood can be used as scaffolds for the synthesis of complex structures of organic/ceramic nanocomposites. The wood cell is a fiber-reinforced resin composite of cellulose fibers in a lignin matrix. A single cell wall, containing several layers of different fiber orientations and lignin content, is separated from its neighboring wall by the middle lamella, a lignin-rich region. In order to achieve total mineralization, deposition on and in the cell wall must be achieved. Geological fossilization of wood occurs as permineralization (filling the void spaces with mineral) and petrifaction (mineralizing the cell wall as the organic component decays) through infiltration of wood with inorganics after growth. Conversely, living plants can incorporate inorganics into their cells and in some cases into the cell walls during growth. In a recent study, we mimicked geological fossilization by infiltrating inorganic precursors into wood cells in order to enhance the properties of wood. In the current work, we use electron microscopy to examine the structure of silica formed in the cell walls after infiltration of tetraethoxysilane (TEOS).


2013 ◽  
Vol 47 ◽  
pp. 13-20
Author(s):  
O. V. Anissimova

Algae samples were collected during different seasons from 1997 to 2011 in two swamps located at Zvenigorod Biological Station in Moscow Region. There were found 25 Cosmarium species and varieties, 9 taxa of them being new to the region. Descriptions of the taxa were specified by observation of cell wall ornamentation with light and scanning electron microscopy. Original descriptions, photos and drawings of algae are presented.


Sign in / Sign up

Export Citation Format

Share Document