Electron microscopy of vesicular-arbuscular mycorrhizae of yellow poplar. I. Characterization of endophytic structures by scanning electron stereoscopy

1975 ◽  
Vol 21 (7) ◽  
pp. 989-993 ◽  
Author(s):  
Darrell A. Kinden ◽  
Merton F. Brown

Vesicular-arbuscular mycorrhizae of yellow poplar (Liriodendron tulipifera L.) were examined by scanning electron microscopy. The morphology and spatial distribution of endophytic structures are illustrated. The use of stereoscopic techniques in conjunction with removal of host cytoplasm permits detection of subtle morphological alterations and progressive deterioration of the fungal component.

1976 ◽  
Vol 22 (1) ◽  
pp. 64-75 ◽  
Author(s):  
Darrell A. Kinden ◽  
Merton F. Brown

Scanning electron stereoscopy and transmission electron microscopy were used to correlate morphological alterations and cytological phenomena associated with deterioration of arbuscules in yellow poplar mycorrhizae. Arbuscular degradation was initiated at the tips of the finest branches and progressed basipetally. Cytoplasm in arbuscular hyphae progressively deteriorated and was followed by collapse of the fungal walls. Degraded portions of the arbuscules aggregated into clumps comprised of host wall material and the distorted fungal walls. Host nuclei, abundant mitochondria, and proplastids were closely associated with arbuscular branches undergoing cytoplasmic deterioration and with clumped portions of the arbuscule which contained degraded hyphal branches. Most of the arbuscules observed had deteriorated to the clumped stage. Some cortical cells contained several clumped arbuscules and nearly mature, intact arbuscules which indicated that reinfection occurs even as degradative phenomena are in progress. It is suggested that substantial quantities of mineral nutrients may be made available to the host via degradation of fungal cytoplasm in the arbuscular hyphae preceding aggregation of degraded hyphae into discrete clumps.


2018 ◽  
Vol 3 (1) ◽  
pp. 12 ◽  
Author(s):  
Zaimahwati Zaimahwati ◽  
Yuniati Yuniati ◽  
Ramzi Jalal ◽  
Syahman Zhafiri ◽  
Yuli Yetri

<p>Pada penelitian ini telah dilakukan isolasi dan karakterisasi bentonit alam menjadi nanopartikel montmorillonit. Bentonit alam yang digunakan diambil dari desa Blangdalam, Kecamatan Nisam Kabupaten Aceh Utara.  Proses isolasi meliputi proses pelarutan dengan aquades, ultrasonic dan proses sedimentasi. Untuk mengetahui karakterisasi montmorillonit dilakukan uji FT-IR, X-RD dan uji morfologi permukaan dengan Scanning Electron Microscopy (SEM). Partikel size analyzer untuk menganalisis dan menentukan ukuran nanopartikel dari isolasi bentonit alam. Dari hasil penelitian didapat ukuran nanopartikel montmorillonit hasil isolasi dari bentonit alam diperoleh berdiameter rata-rata 82,15 nm.</p><p><em>In this research we have isolated and characterized natural bentonite into montmorillonite nanoparticles. Natural bentonite used was taken from Blangdalam village, Nisam sub-district, North Aceh district. The isolation process includes dissolving process with aquades, ultrasonic and sedimentation processes.  The characterization of montmorillonite, FT-IR, X-RD and surface morphology test by Scanning Electron Microscopy (SEM). Particle size analyzer to analyze and determine the size of nanoparticles from natural bentonite insulation. From the research results obtained the size of montmorillonite nanoparticles isolated from natural bentonite obtained an average diameter of 82.15 nm.</em></p>


Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 446
Author(s):  
Ioannis Spanos ◽  
Zacharias Vangelatos ◽  
Costas Grigoropoulos ◽  
Maria Farsari

The need for control of the elastic properties of architected materials has been accentuated due to the advances in modelling and characterization. Among the plethora of unconventional mechanical responses, controlled anisotropy and auxeticity have been promulgated as a new avenue in bioengineering applications. This paper aims to delineate the mechanical performance of characteristic auxetic and anisotropic designs fabricated by multiphoton lithography. Through finite element analysis the distinct responses of representative topologies are conveyed. In addition, nanoindentation experiments observed in-situ through scanning electron microscopy enable the validation of the modeling and the observation of the anisotropic or auxetic phenomena. Our results herald how these categories of architected materials can be investigated at the microscale.


1993 ◽  
Vol 48 (11-12) ◽  
pp. 923-929 ◽  
Author(s):  
S. M. Boyetchko ◽  
J. P. Tewari

Abstract Three V A mycorrhizal fungal species were isolated from soils in Alberta, Canada and examined by scanning electron microscopy and energy-dispersive X-ray microanalysis. Mature spores of Glomus aggregatum developed an outer hyaline wall which contained lower levels of calcium than the middle wall. Examination of G. pansihalos spores revealed a lower level of calcium in the outer evanescent wall as compared to the ornamented wall. When spores of Entrophospora infrequens were examined, the wall of the vesicle was found to contain similar levels of calcium as the ornamented wall of the spore. The significance of the results concerning the presence of calcium in mycorrhizal spore walls is discussed, as is the occurrence of the mycorrhizal species.


2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Liu Liu ◽  
Decai Gong ◽  
Zhengquan Yao ◽  
Liangjie Xu ◽  
Zhanyun Zhu ◽  
...  

Abstract Historically, sutras played an important role in spreading Buddhist faith and doctrine, and today these remain important records of Buddhist thought and culture. A Mahamayuri Vidyarajni Sutra with polychrome paintings was found inside the cavity on top of the Nanmen Buddhist pagoda, built in the early Tang dynasty (618–627 CE) and located in Anhui Province, China. Textile was found on the preface which is strongly degraded and fragile. Unfortunately, the whole sutra is under severe degradation and is incomplete. Technical analysis based on scientific methods will benefits the conservation of the sutra. Optical microscopy (OM), micro-Raman spectroscopy combined with optical microscope (Raman), scanning electron microscopy in combination with energy dispersive X-ray analysis (SEM–EDS) and Fourier Transform Infrared Spectroscopy (FTIR) were used to characterize the pigment and gilded material, as well as the paper fiber and textile. Pigments such as cinnabar, minium, paratacamite, azurite, lead white were found. Gilded material was identified as gold. A five-heddle warp satin, made of silk, was found as the textile on the preface of the sutra. The sutra’s preface and inner pages were made of paper comprised of bamboo and bark. As a magnificent yet recondite treasure of Buddhism, the sutra was analyzed for a better understanding of the material. A conservation project of the sutra will be scheduled accordingly.


Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 968
Author(s):  
Paul Monchot ◽  
Loïc Coquelin ◽  
Khaled Guerroudj ◽  
Nicolas Feltin ◽  
Alexandra Delvallée ◽  
...  

The size characterization of particles present in the form of agglomerates in images measured by scanning electron microscopy (SEM) requires a powerful image segmentation tool in order to properly define the boundaries of each particle. In this work, we propose to use an algorithm from the deep statistical learning community, the Mask-RCNN, coupled with transfer learning to overcome the problem of generalization of the commonly used image processing methods such as watershed or active contour. Indeed, the adjustment of the parameters of these algorithms is almost systematically necessary and slows down the automation of the processing chain. The Mask-RCNN is adapted here to the case study and we present results obtained on titanium dioxide samples (non-spherical particles) with a level of performance evaluated by different metrics such as the DICE coefficient, which reaches an average value of 0.95 on the test images.


Sign in / Sign up

Export Citation Format

Share Document