Seismic response and retrofit of industrial brick masonry chimneys

1992 ◽  
Vol 19 (1) ◽  
pp. 117-128 ◽  
Author(s):  
A. Ghobarah ◽  
T. Baumber
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Strong Motion ◽  
Brick Masonry ◽  
Wind Loading ◽  
Earthquake Ground Motion ◽  
Lumped Mass ◽  
Mass System ◽  
Higher Modes ◽  
Recent Earthquakes

During recent earthquakes, the documented cases of collapsed unreinforced brick masonry industrial chimneys are numerous. Observed modes of structural failure are either total collapse or sometimes collapse or damage of the top third of the structure. The objective of this study is to analyze and explain the modes of observed failure of masonry chimneys during earthquake events, and to evaluate two retrofit systems for existing chimneys in areas of high seismicity. The behaviour of the masonry chimney, when subjected to earthquake ground motion, was modelled using a lumped mass system. Several actual strong motion records were used as input to the model. The shear, moment, and displacement responses to the earthquake ground motion were evaluated for various chimney configurations. It was found that the failure of the chimney at its base is the result of the fundamental mode of vibration. Failure at the top third of the structure due to the higher modes of vibration is possible when the chimney is subjected to high frequency content earthquakes. Higher modes, which are normally not of concern under wind loading, were shown to be critical in seismic design. Post-tensioning and the reinforcing steel cage were found to be effective retrofit systems. Key words: masonry, chimneys, behaviour, analysis, design, retrofit, dynamic, earthquakes, seismic response.

Uncertainty Quantification of Seismic Response of Reactor Building Considering Different Modeling Methods

2020 ◽  
Author(s):  
Byunghyun Choi ◽  
Akemi Nishida ◽  
Ken Muramatsu ◽  
Tatsuya Itoi ◽  
Tsuyoshi Takada
Keyword(s):  
Uncertainty Quantification ◽  
Seismic Response ◽  
Ground Motion ◽  
Power Plants ◽  
Epistemic Uncertainty ◽  
Response Analysis ◽  
Lumped Mass ◽  
Fukushima Accident ◽  
Mass System ◽  
Modeling Methods

Abstract After the 2011 Fukushima accident, the seismic regulations for nuclear power plants (NPP) in Japan have been strengthened to include countermeasures far beyond design-basis accidents. The importance of seismic probabilistic risk assessments, therefore, have been the focus of deserved attention. Generally, an uncertainty quantification has been a very important undertaking to assess for fragility in NPP buildings. Therefore, this study focuses on the reduction in epistemic uncertainty by aiming to clarify the seismic-response effects on NPP buildings based on different modeling methods. As a first step in this study, the authors compared the seismic-response effects using two modeling methods of analysis. To evaluate the seismic response, an analysis was performed on two building model types; these being the three-dimensional (3D) finite-element model and the sway-rocking model with a conventional lumped mass system. To input a ground motion, the authors adopted 200 types of simulated seismic ground motions, generated by fault-rupture models, using stochastic seismic source characteristics. For the uncertainty quantification, we conducted a statistical analysis of the seismic responses acquired from the two modeling methods based on the building response each ground-motion input, and quantitatively evaluated the uncertainty response by considering the different modeling methods. We found a clear difference in the modeling methods near the floor and wall openings. We also imparted our knowledge on these 3D effects for the seismic-response analysis.

scholarly journals Seismic rocking effects on a mine tower under induced and natural earthquakes

2021 ◽  
Vol 21 (2) ◽  
Author(s):  
Piotr Adam Bońkowski ◽  
Juliusz Kuś ◽  
Zbigniew Zembaty
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Ground Surface ◽  
Tall Buildings ◽  
Earthquake Ground Motion ◽  
Seismic Action ◽  
Seismic Effects ◽  
Copper Ore ◽  
Rotational Components ◽  
Natural Earthquakes

AbstractRecent research in engineering seismology demonstrated that in addition to three translational seismic excitations along x, y and z axes, one should also consider rotational components about these axes when calculating design seismic loads for structures. The objective of this paper is to present the results of a seismic response numerical analysis of a mine tower (also called in the literature a headframe or a pit frame). These structures are used in deep mining on the ground surface to hoist output (e.g. copper ore or coal). The mine towers belong to the tall, slender structures, for which rocking excitations may be important. In the numerical example, a typical steel headframe 64 m high is analysed under two records of simultaneous rocking and horizontal seismic action of an induced mine shock and a natural earthquake. As a result, a complicated interaction of rocking seismic effects with horizontal excitations is observed. The contribution of the rocking component may sometimes reduce the overall seismic response, but in most cases, it substantially increases the seismic response of the analysed headframe. It is concluded that in the analysed case of the 64 m mining tower, the seismic response, including the rocking ground motion effects, may increase up to 31% (for natural earthquake ground motion) or even up to 135% (for mining-induced, rockburst seismic effects). This means that not only in the case of the design of very tall buildings or industrial chimneys but also for specific yet very common structures like mine towers, including the rotational seismic effects may play an important role.

Improvement of the objective function in the velocity structure inversion based on horizontal-to-vertical spectral ratio of earthquake ground motions

2020 ◽  
Vol 224 (1) ◽  
pp. 1-16
Author(s):  
Mianshui Rong ◽  
Xiaojun Li ◽  
Lei Fu
Keyword(s):  
Objective Function ◽  
Ground Motion ◽  
Velocity Structure ◽  
Strong Motion ◽  
Earthquake Ground Motion ◽  
Inversion Method ◽  
Observation Data ◽  
S Wave ◽  
Inversion Methods ◽  
Underground Velocity Structures

SUMMARY Given the improvements that have been made in the forward calculations of seismic noise horizontal-to-vertical spectral ratios (NHVSRs) or earthquake ground motion HVSRs (EHVSRs), a number of HVSR inversion methods have been proposed to identify underground velocity structures. Compared with the studies on NHVSR inversion, the research on the EHVSR-based inversion methods is relatively rare. In this paper, to make full use of the widely available and constantly accumulating strong-motion observation data, we propose an S-wave HVSR inversion method based on diffuse-field approximation. Herein, the S-wave components of earthquake ground motion recordings are considered as data source. Improvements to the objective function has been achieved in this work. An objective function with the slope term is introduced. The new objective function can mitigate the multisolution phenomenon encountered when working with HVSR curves with multipeaks. Then, a synthetic case is used to show the verification of the proposed method and this method has been applied to invert underground velocity structures for six KiK-net stations based on earthquake observations. The results show that the proposed S-wave EHVSR inversion method is effective for identifying underground velocity structures.

Book Review of “On Strong Motion Seismology” (in Japanese) written and edited by Hiroaki Yamanaka, published by University of Tokyo Press

2006 ◽  
Vol 1 (3) ◽  
pp. 449-451
Author(s):  
Editorial Office
Keyword(s):  
Ground Motion ◽  
Strong Motion ◽  
Earthquake Ground Motion ◽  
Large Fires ◽  
Hyogo Prefecture ◽  
Narrow Belt ◽  
Oil Tanks ◽  
Second Period ◽  
Collapsed Building

This book is a work for general readers, straight-forwardly treating the theme of "strong earthquake ground motion" directly causing disaster and explaining how to cope. Eartquake ground motion is generally said to cause earthquake disasters and the degree of ground motion is determined both by the magnitude of the earthquake and the distance from its epicenter. In reality, however, things are not so simple. In the 2003 Tokachi Offshore Earthquake, for example, shaking at a relatively long 10-second period resonated at the characteristic frequency of oil tanks, triggering sloshing and causing large fires. In the 1995 Southern Hyogo Prefecture Earthquake (the Great Hanshin-Awaji Earthquake Disaster), for another example, a long narrow belt of disaster confirmed where damage to collapsed building was especially significant because only ground within this belt quaked more intensely than elsewhere.

STOCHASTIC SEISMIC RESPONSE OF BASE-ISOLATED BUILDINGS

2013 ◽  
Vol 05 (01) ◽  
pp. 1350006 ◽  
Author(s):  
C. JACOB ◽  
K. SEPAHVAND ◽  
V. A. MATSAGAR ◽  
S. MARBURG
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Probability Distributions ◽  
Ground Motions ◽  
Earthquake Ground Motion ◽  
Response Analysis ◽  
Motion Model ◽  
Stochastic Response ◽  
Ground Motion Model ◽  
Stochastic Seismic Response

The stochastic response of base-isolated building considering the uncertainty in the characteristics of the earthquakes is investigated. For this purpose, a probabilistic ground motion model, for generating artificial earthquakes is developed. The model is based upon a stochastic ground motion model which has separable amplitude and spectral non-stationarities. An extensive database of recorded earthquake ground motions is created. The set of parameters required by the stochastic ground motion model to depict a particular ground motion is evaluated for all the ground motions in the database. Probability distributions are created for all the parameters. Using Monte Carlo (MC) simulations, the set of parameters required by the stochastic ground motion model to simulate ground motions is obtained from the distributions and ground motions. Further, the bilinear model of the isolator described by its characteristic strength, post-yield stiffness and yield displacement is used, and the stochastic response is determined by using an ensemble of generated earthquakes. A parametric study is conducted for the various characteristics of the isolator. This study presents an approach for stochastic seismic response analysis of base-isolated building considering the uncertainty involved in the earthquake ground motion.

scholarly journals Variation Evaluation of Path Characteristic and Site Amplification Factor of Earthquake Ground Motion at Four Sites in Central Japan

2021 ◽  
Vol 11 (5) ◽  
pp. 7658-7664
Author(s):  
T. Nagao
Keyword(s):  
Ground Motion ◽  
Amplification Factor ◽  
Hazard Analysis ◽  
Strong Motion ◽  
Site Amplification ◽  
Earthquake Ground Motion ◽  
Constraint Condition ◽  
Central Japan ◽  
Source Characteristic ◽  
Site Amplification Factor

The considered parameters in seismic design vary, with the Earthquake Ground Motion (EGM) having the largest variation. Since source characteristic, path characteristic, and Site Amplification Factor (SAF) influence the EGM, it is crucial to appropriately consider their variations. Source characteristic variations are mainly considered in a seismic hazard analysis, which is commonly used to evaluate variations in EGM. However, it is also important to evaluate variations in path characteristic and SAF with only a few studies having individually and quantitatively examined the variations of these two characteristics. In this study, based on strong-motion observation records obtained from four sites in central Japan, the three characteristics were extracted from seismograms using the concept of spectral inversion. After removing the source characteristic, the path characteristic and SAF were separated, and the variations in these two characteristics were quantified. To separate and obtain each characteristic from the observed record, one constraint condition must be imposed, whereas the variations in the constraint condition must be ignored. In that case, the variations in the constraint condition are included in the variations of the separated characteristics. In this study, this problem was solved by evaluating the variation in the constraint condition, which is the SAF at a hard rock site, by the use of the vertical array observation record at the site.

The Loma Prieta earthquake, ground motion, and damage in Oakland, Treasure Island, and San Francisco

1991 ◽  
Vol 81 (5) ◽  
pp. 2019-2047
Author(s):  
Thomas C. Hanks ◽  
A. Gerald Brady
Keyword(s):  
Ground Motion ◽  
San Francisco ◽  
Strong Ground Motion ◽  
Strong Motion ◽  
Earthquake Ground Motion ◽  
Transverse Motion ◽  
Loma Prieta Earthquake ◽  
Loma Prieta ◽  
Treasure Island ◽  
Strong Ground

Abstract The basis of this study is the acceleration, velocity, and displacement wave-forms of the Loma Prieta earthquake (18 October 1989; M = 7.0) at two rock sites in San Francisco, a rock site on Yerba Buena Island, an artificial-fill site on Treasure Island, and three sites in Oakland underlain by thick sections of poorly consolidated Pleistocene sediments. The waveforms at the three rock sites display a strong coherence, as do the three sedimentary sites in Oakland. The duration of strong motion at the rock sites is very brief, suggestive of an unusually short source duration for an earthquake of this size, while the records in Oakland show strong amplification effects due to site geology. The S-wave group at Treasure Island is phase coherent with the Oakland records, but at somewhat diminished amplitudes, until the steps in acceleration at approximately 15 sec, apparently signaling the onset of liquefaction. All seven records clearly show shear-wave first motion opposite to that expected for the mainshock radiation pattern and peak amplitudes greater than expected for sites at these distances (95 ± 3 km) from an earthquake of this magnitude. While the association between these ground motion records and related damage patterns in nearby areas has been easily and eagerly accepted by seismological and engineering observers of them, we have had some difficulty in making such relationships quantitative or even just clear. The three Oakland records, from sites that form a nearly equilateral triangle about the Cypress Street viaduct collapse, are dominated by a long-period resonance (≃ 1 1/2-sec period) far removed from the natural frequency of the structure to transverse motion (2.5 Hz) or from high-frequency amplification bands observed in aftershock studies. A spectral ratio arbiter of this discrepancy confuses it further. The failure of the East Bay crossing of the San Francisco-Oakland Bay Bridge cannot be attributed to relative displacements of the abutments in Oakland and Yerba Buena Island, but the motions of the Bay Bridge causing failure remain unknown. The steps in acceleration at Treasure Island present unusual strong-motion accelerogram processing problems, and modeling suggests that the velocity and displacement waveforms are contaminated by a spurious response of the filtering operations to the acceleration steps. A variety of coincidences suggests that the Treasure island accelerogram is the most likely strong-motion surrogate for the filled areas of the Marina District, for which no mainshock records are available, but the relative contributions of bad ground, poor construction and truly strong ground motion to damage in the Marina District will never by known in any quantitative way. The principal lesson of all of this is that until a concerted effort is mounted to instrument ground and structures that are likely to fail during earthquakes, our understanding of the very complex relationships between strong ground motion and earthquake damage will, in general, remain rudimentary, imprecise, and vague.

Tragwerksantwort Wiener Gründerzeithäuser unter Erdbebenanregung auf Grundlage des Wiener Erdbebensatzes/Seismic response of Viennese brick masonry buildings based on the Viennese ground motion set

Bauingenieur ◽  
2019 ◽  
Vol 94 (12) ◽  
pp. 461-471
Author(s):  
Lukas Moschen ◽  
Konstantinos Theodoros Tsalouchidis ◽  
Christoph Adam
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Brick Masonry ◽  
Masonry Buildings ◽  
Wird Eine

Zusammenfassung In dieser Arbeit wird eine Strategie zur Abschätzung der Antwort von Wiener Gründerzeithäusern unter Erdbebeneinwirkung mithilfe von nicht-linearen Zeitverlaufsberechnungen vorgestellt. Im ersten Teil wird aus einer Datenbank ein Satz von 14 aufgezeichneten Erdbebenschrieben für den Standort Wien südwestlich der Donau extrahiert. Da diese Schriebe im Mittel das Antwortspektrum für diesen Standort in einem weiten Periodenbereich abbilden, können sie für den Erdbebennachweis einer großen Klasse von Tragwerken, deren Grundperioden in diesen Periodenbereich fallen, verwendet werden. Der zweite Teil widmet sich der Modellbildung unter Berücksichtigung des für den betrachteten Bauwerkstypus speziellen konstruktiven Aufbaus sowie der inelastischen Verformungskapazitäten des Tragwerks. Die beschriebene Strategie wird am sogenannten Wiener Gründerzeit-Mustergebäude angewendet, um dessen Antwort unter Erdbebenanregung abzuschätzen.

Sign in / Sign up

Export Citation Format

Share Document