An experimental study of end plate shear connections

1991 ◽  
Vol 18 (5) ◽  
pp. 818-829 ◽  
Author(s):  
Karl Van Dalen ◽  
Mark Van Dalen
Keyword(s):  
Load Transfer ◽  
Shear Capacity ◽  
Shear Behaviour ◽  
Stress Distributions ◽  
End Plate ◽  
Shear Connections ◽  
Scale Test ◽  
Plate Connections ◽  
Plate Connection ◽  
Bolt Diameter

The shear behaviour of both conventional end plate connections and clipped end plate connections, in which the upper corner of the end plate was removed, was examined in a laboratory investigation of 29 full-scale test specimens. The study included connections of varying geometry, bolt diameter, and end plate depth. The majority of the connections failed in one of two modes: a failure of the bolt group component or a web-tear failure. For connections failing through the bolt group, the ratio of the shear capacity of the clipped connection to that of the conventional connection is the ratio of the number of bolts in the clipped and conventional connections. Even when failure is not through the bolt group, the shear capacity of an end plate connection is reduced when the upper corner of the end plate is clipped. The experimentally determined shear capacities are compared with the calculated resistances determined using the resistance equations in CAN3-S16.1 in conjunction with the assumptions of load transfer mechanisms and stress distributions embodied in the design aid for end plate connections in the Handbook of Steel Construction. Key words: beams, connections, bolts, end plates, shear strength.

Structural Behaviour of Blind Bolted Connection to Concrete-Filled Steel Tubular Columns

2010 ◽  
Vol 163-167 ◽  
pp. 591-595
Author(s):  
Jing Feng Wang ◽  
Xin Yi Chen ◽  
Lin Hai Han
Keyword(s):  
Analysis Model ◽  
Bolted Connections ◽  
Structural Behaviour ◽  
Tubular Columns ◽  
End Plate ◽  
Moment Resisting ◽  
Strength And Stiffness ◽  
Plate Connections ◽  
The Moment ◽  
Plate Connection

This paper studies structural behaviour of the blind bolted connections to concrete-filled steel tubular columns by a serial of experimental programs, which conducted involving eight sub-assemblages of cruciform beam-to-column joints subjected to monotonic loading and cyclic loading. The moment-rotation hysteretic relationships and failure models of the end plate connections have been measured and analyzed. A simplified analysis model for the blind bolted connections is proposed based on the component method. It is concluded that the blind bolted end plate connection has reasonable strength and stiffness, whilst the rotation capacity of the connection satisfies the ductility requirements for earthquake-resistance in most aseismic regions. This typed joint has excellent seismic performance, so it can be used in the moment-resisting composite frame.

New Bolted End-Plate Connection Design

2014 ◽  
Vol 1025-1026 ◽  
pp. 878-884
Author(s):  
Jong Wan Hu ◽  
Jun Hyuk Ahn
Keyword(s):  
Design Procedure ◽  
High Strength ◽  
Limit States ◽  
Moment Connections ◽  
End Plate ◽  
Plastic Strength ◽  
Plate Connections ◽  
Plate Connection ◽  
Connection Design

This paper is principally performed to survey end-plate connection are described in the next part based on ideal limit states. The determination of end-plate based on the full plastic strength of the steel beam in accordance with 2001 AISC-LRFD manual and AISC/ANSI 358-05 Specifications. The bolted connections considered herein were performed to include the end-plate component of moment connections. This study is intended to investigate economic design for end-plate connections. In addition, the proposed end-plate model is evaluated by comparing the required factored bolt strength. The end-plates using 8 high strength bolts with wider gages demonstrated this design. The equations belonging to the step-by-step design procedure are described based on complete proving of design. Finally, new design methodology is applied to end-plate connections suggested in this study.

Experimental Investigation of Retrofitted Extended End-Plate Connections

2013 ◽  
Vol 284-287 ◽  
pp. 1330-1333
Author(s):  
Poi Ngian Shek ◽  
M.Md. Tahir ◽  
Cher Siang Tan ◽  
Arizu Sulaiman
Keyword(s):  
Experimental Tests ◽  
Horizontal Shear ◽  
Initial Stiffness ◽  
Component Method ◽  
End Plate ◽  
Theoretical Predictions ◽  
Extended End Plate ◽  
Plate Connections ◽  
The Moment ◽  
Plate Connection

A series of retrofitted extended end-plate connections have been tested experimentally and evaluated using the component method specified in Eurocode 3. The component method decomposed the end-plate connection into several components, including the tension zone, compression zone, vertical and horizontal shear zone that occurred at the bolt, end-plate, beam and column. Based on the theoretical model, the moment resistance and the initial stiffness of a connection can be predicted. Four experimental tests on the retrofitted extended end-plate connections have been conducted to verify the proposed design method. From the experiment tests, all moment resistance of the connections showed good agreement with theoretical predictions, which establish a reliable foundation to predict the moment resistance of the retrofitted end-plate connection. All initial stiffnesses calculated from theoretical predictions do not represent the actual behaviour of tested connection. All tested connections can be classified as partial strength based on EC 3: Part 1.8, in condition the welding capacity is at least 50% higher than the capacity calculated from the component method.

scholarly journals Verification of prying effect in prestressed end-plate connection

2013 ◽  
Vol 12 (2) ◽  
pp. 251-258
Author(s):  
Krzysztof Ostrowski ◽  
Jan Łaguna ◽  
Aleksander Kozłowski
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
High Strength ◽  
Experimental Tests ◽  
Analytical Models ◽  
End Plate ◽  
Plate Connections ◽  
Plate Connection ◽  
Element Method

End-plate connections are very often used is steelwork, as tension and bending connections. As a result of deflection of end plate, additional forces, known as prying forces arise and consequently increase stresses in bolts. Eurocode 1993-1-8 do not distinguish end-plate connections prestressed by high strength bolts from non-prestressed. The aim of the paper is to perform the comparison of previous analytical models and code regulations for coefficient of prying forces to the experimental tests and modelling by finite element method. Results of the analysis show that the behaviour of prestressed connection is essentially different with comparison to non-prestressed.

scholarly journals Numerical testing of steel beam-to-column bolted extended end-plate connection with haunches

2019 ◽  
Vol 29 ◽  
pp. 02008
Author(s):  
Dominiq Jakab ◽  
Aurel Stratan ◽  
Dan Dubina
Keyword(s):  
Material Model ◽  
Tensile Tests ◽  
End Plate ◽  
Numerical Testing ◽  
Experimental Campaign ◽  
Moment Resisting ◽  
Extended End Plate ◽  
Plate Connections ◽  
Plate Connection ◽  
Steel Joints

During the European research project entitled EQUALJOINTS (European pre-Qualified steel JOINTS) [1], which recently concluded, the matter of providing a set of pre-qualification procedures for moment resisting beam-to-column connections which are currently used in Europe has been addressed. During the experimental campaign 24 specimens with bolted extended end-plate connections with haunches were tested. The current paper presents the numerical model which has been developed such that numerical testing may be performed to further investigate specific details. In what concerns the material, an isotropic material model has been calibrated and used based on tensile tests of coupons extracted from the specimens to model the actual plastic behaviour. Moreover, the imperfections of the beam have been taken into account using a bucking analysis to model as accurate as possible the specimens tested. The interaction between parts has been modelled using contacts with different interaction laws. The model used for the bolt has been calibrated such that the preloading and failure replicate the behaviour of the actual bolts used in the experiments.

Analysis and design for the resilience of shear connections

2010 ◽  
Vol 37 (12) ◽  
pp. 1581-1589 ◽  
Author(s):  
Yanglin Gong
Keyword(s):  
Progressive Collapse ◽  
Axial Deformation ◽  
Capacity Design ◽  
Analysis And Design ◽  
Shear Connection ◽  
End Plate ◽  
Beam System ◽  
Shear Connections ◽  
Parametric Studies ◽  
Plate Connection

This paper proposes an approach for quantifying the demands on shear connections under the assumption of an ineffective column. Formulas and an algorithm are developed to evaluate the axial force, axial deformation, rotation, and moment demands on beam-to-column shear connections. The analysis algorithm developed is verified using a solved example found from literature. Parametric studies are conducted to determine important parameters in the connection modeling for resilience design. Furthermore, a detailed procedure indicating how to obtain the properties of an end-plate shear connection for its resilience design is provided. Four end-plate connection examples are employed to illustrate the proposed methodology. Finally, a capacity design concept is introduced for the ductility design of shear connections. This study demonstrates that shear connections should be designed explicitly for its resilience to resist progressive collapse of a girder-and-beam system.

Seismic Performance of Moment End-Plate Connections to CFT Column under Cyclic Loading

2013 ◽  
Vol 680 ◽  
pp. 205-210
Author(s):  
Ikhlas S. Sheet ◽  
Umarani Gunasekaran
Keyword(s):  
Cyclic Loading ◽  
Cyclic Load ◽  
Experimental Program ◽  
Steel Beams ◽  
Welding Zone ◽  
End Plate ◽  
Plate Connections ◽  
Cft Column ◽  
Plastic Rotations ◽  
Plate Connection

An experimental program under cyclic load is performed on two half-scale interior moment end-plate connections to concrete filled tubular (CFT) columns. Flat and curved stiffened extended end-plates were welded to the steel beams in the shop, and bolted on the site to the square and circular CFT column tubes respectively, using steel rods passing through the column. The experimental results demonstrated that both circular and rectangular end-plate connections showed similar performance in a ductile manner and the stiffener elements were effective to form the plastic hinges away from the welding zone, also the proposed curved end-plate connection with rods passing through the column in “X” shape was effective. The test specimens showed a plastic rotations capacity of 0.054 radian.

Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection

2018 ◽  
Vol 21 (12) ◽  
pp. 1777-1791
Author(s):  
Joma HM Omer ◽  
Ahmad BH Kueh ◽  
Poi-Ngian Shek
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Flexural Behavior ◽  
Major Influence ◽  
End Plate ◽  
Hybrid Beams ◽  
Plate Connections ◽  
Plate Connection ◽  
Three Dimensional Finite Element

The flexural behavior of partially welded flush end-plate connections incorporating built-up hybrid beams and columns is analytically and numerically investigated. An experimentally obeying three-dimensional finite element model is first constructed. To circumvent the laborious effort of three-dimensional simulation and experimental work, a new experimentally and numerically complying equation approach is introduced for the construction of a continuous moment–rotation ( M–θ) description. For the proposed equation, two essential terms are required: the rotational stiffness, Sj,ini, obtained by employing the component method and the maximum moment, Mmax, produced using the proposed linearly distributed multi-parameter fitting technique. To demonstrate the applicability of the proposed equation, a variation in the geometric configuration of connections within the practical range is considered. Excellent agreement is noted when comparing all M–θ relationships produced by the proposed equation to those by the finite element method and experiments. In addition, the stress distribution and main deformation modes are numerically obtained, where the ranking of stress criticality is offered for all structural parts. The depth, width, flange, and web thicknesses, as well as the yield stress of the beam, have a major influence on Mmax, as predicted by the proposed equation. Also, bolts have been identified as the most critically stressed component.

scholarly journals Analysis of the Mechanical Behavior of Bolted Beam-Column Connections with Different Structural Forms

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Rongqian Yang ◽  
Xuejun Zhou
Keyword(s):  
Finite Element ◽  
Mechanical Behavior ◽  
Simulation Analysis ◽  
Element Model ◽  
Hysteretic Behavior ◽  
Load Bearing ◽  
End Plate ◽  
Extended End Plate ◽  
Plate Connections ◽  
Plate Connection

In order to study the mechanical behavior of bolted beam-column connections, the accuracy and applicability of the finite element model were firstly validated according to the published experiments on end-plate connections using ABAQUS. Then, in order to discuss the mechanical behavior of connections, three semirigid connections which are convenient for prefabricated construction, including top-and-seat angle connections with web and ear plate, extended end-plate connection, and T-stub connection, were examined using numerical simulation analysis to study and compare their capacity, hysteretic behavior, ductility, and degradation characteristics in detail. The results showed that the finite element models that were built could effectively simulate the load bearing behavior of bolted connections under both single-direction loading and cyclic loading. The three connections showed good load bearing capacity. The connectors significantly affected the energy dissipation capacity under load. The extended end-plate connection demonstrated the best performance in both mechanical behavior and manufacture and installation, so it would therefore be the preferred option.

Behaviour of bolted link-column joints in eccentrically braced frames

1995 ◽  
Vol 22 (4) ◽  
pp. 745-754 ◽  
Author(s):  
T. Ramadan ◽  
A. Ghobarah
Keyword(s):  
Shear Force ◽  
Design Procedure ◽  
Experimental Program ◽  
Braced Frames ◽  
Eccentrically Braced Frames ◽  
End Plate ◽  
Column Joint ◽  
Extended End Plate ◽  
Plate Connections ◽  
Plate Connection

Current seismic provisions require that shear links in eccentrically braced frames be fully welded to the column flanges at the link-column joint. Since field welding may have its disadvantages, the use of bolted extended end-plate connection is examined. An experimental program is conducted to assess the response of extended end-plate connections of link-column joints in eccentrically braced frames. Six link-column joint specimens are tested using a cyclic load that represents the severe load reversals that the frame may be subjected to during strong earthquakes. The specimens are selected on the basis of different connection designs. Measurements of forces, strains, and displacements are made. Interaction curves relating the shear force and moment acting on links with semirigid connections are developed. The slip tendency and energy dissipation capacity of the different specimens are compared. On the basis of the test results, a design procedure is developed for the bolted extended end-plate link-column connection. It is concluded that bolted extended end-plate connections can be used for link-column joints of eccentrically braced frames. In properly designed connections bolt slippage was not measured even at high shear forces that are characteristic of link-column joint. Existing guidelines for the design of extended end-plate link-column joints are modified to account for the variable shear force and moment associated with links of different lengths. Key words: steel, frame, eccentric, braced, bolted, end plate, link, connection.

Sign in / Sign up

Export Citation Format

Share Document