Sur le dimensionnement optimal de brise–lames à talus en enrochements et en blocs artificiels

1974 ◽  
Vol 1 (1) ◽  
pp. 14-27
Author(s):  
Y. Ouellet
Keyword(s):  
National Research Council ◽  
Construction Cost ◽  
Wave Climate ◽  
Economic Losses ◽  
Damage Cost ◽  
Scale Models ◽  
Different Types ◽  
Wave Conditions ◽  
Hydraulics Laboratory ◽  
Selection Of

The selection of a design wave is best obtained by the use of a relationship showing the construction cost versus the anticipated damage cost. In the present paper, the influence of the main parameters affecting the optimum design criteria has been studied in reference to practical cases.Indeed, this criteria has been applied to three different wave conditions obtained from a wave climate study conducted by the Hydraulics Division of the National Research Council of Canada in the Gulf of St. Lawrence. The damages were evaluated using results from breakwater scale models carried out in the Hydraulics Laboratory of Laval University. Three different types of armour units have been considered: that is, quarry stones, tetrapods, and ‘dolosse’.For the sake of comparison, we have studied, in addition to the three wave conditions and the three types of armour units mentioned above, the influence of the economic losses due to malfunction of the structure and of the choice of an annual interest rate. We have also taken into account the water depth at the structure, a parameter which was found often to play an important role in limiting the value of the design wave.

scholarly journals Multi-Criteria Selection of Additives in Porous Asphalt Mixtures Using Mechanical, Hydraulic, Economic, and Environmental Indicators

2021 ◽  
Vol 13 (4) ◽  
pp. 2146
Author(s):  
Anik Gupta ◽  
Carlos J. Slebi-Acevedo ◽  
Esther Lizasoain-Arteaga ◽  
Jorge Rodriguez-Hernandez ◽  
Daniel Castro-Fresno
Keyword(s):  
Cellulose Fiber ◽  
Environmental Indicators ◽  
Asphalt Mixtures ◽  
Environmental Benefits ◽  
Modified Bitumen ◽  
Porous Asphalt ◽  
Different Types ◽  
Product Assessment ◽  
Polymer Modified Bitumen ◽  
Selection Of

Porous asphalt (PA) mixtures are more environmentally friendly but have lower durability than dense-graded mixtures. Additives can be incorporated into PA mixtures to enhance their mechanical strength; however, they may compromise the hydraulic characteristics, increase the total cost of pavement, and negatively affect the environment. In this paper, PA mixtures were produced with 5 different types of additives including 4 fibers and 1 filler. Their performances were compared with the reference mixtures containing virgin bitumen and polymer-modified bitumen. The performance of all mixes was assessed using: mechanical, hydraulic, economic, and environmental indicators. Then, the Delphi method was applied to compute the relative weights for the parameters in multi-criteria decision-making methods. Evaluation based on distance from average solution (EDAS), technique for order of the preference by similarity to ideal solution (TOPSIS), and weighted aggregated sum product assessment (WASPAS) were employed to rank the additives. According to the results obtained, aramid pulp displayed comparable and, for some parameters such as abrasion resistance, even better performance than polymer-modified bitumen, whereas cellulose fiber demonstrated the best performance regarding sustainability, due to economic and environmental benefits.

scholarly journals The Winter Habitat Selection of Red Deer (Cervus elaphus) Based on a Multi-Scale Model

Animals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2454
Author(s):  
Yue Sun ◽  
Yanze Yu ◽  
Jinhao Guo ◽  
Minghai Zhang
Keyword(s):  
Habitat Selection ◽  
Environmental Factors ◽  
Cervus Elaphus ◽  
Red Deer ◽  
Scale Model ◽  
Winter Habitat ◽  
Multi Scale ◽  
Optimal Scale ◽  
Scale Models ◽  
Selection Of

Single-scale frameworks are often used to analyze the habitat selections of species. Research on habitat selection can be significantly improved using multi-scale models that enable greater in-depth analyses of the scale dependence between species and specific environmental factors. In this study, the winter habitat selection of red deer in the Gogostaihanwula Nature Reserve, Inner Mongolia, was studied using a multi-scale model. Each selected covariate was included in multi-scale models at their “characteristic scale”, and we used an all subsets approach and model selection framework to assess habitat selection. The results showed that: (1) Univariate logistic regression analysis showed that the response scale of red deer to environmental factors was different among different covariate. The optimal scale of the single covariate was 800–3200 m, slope (SLP), altitude (ELE), and ratio of deciduous broad-leaved forests were 800 m in large scale, except that the farmland ratio was 200 m in fine scale. The optimal scale of road density and grassland ratio is both 1600 m, and the optimal scale of net forest production capacity is 3200 m; (2) distance to forest edges, distance to cement roads, distance to villages, altitude, distance to all road, and slope of the region were the most important factors affecting winter habitat selection. The outcomes of this study indicate that future studies on the effectiveness of habitat selections will benefit from multi-scale models. In addition to increasing interpretive and predictive capabilities, multi-scale habitat selection models enhance our understanding of how species respond to their environments and contribute to the formulation of effective conservation and management strategies for ungulata.

scholarly journals Methods for Preventing Visual Attacks in Convolutional Neural Networks Based on Data Discard and Dimensionality Reduction

2021 ◽  
Vol 11 (11) ◽  
pp. 5235
Author(s):  
Nikita Andriyanov
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Network Inference ◽  
Recognition Accuracy ◽  
Network Architectures ◽  
Reduced Dimensions ◽  
Different Types ◽  
Rectangular Area ◽  
Noise Impulse ◽  
Selection Of

The article is devoted to the study of convolutional neural network inference in the task of image processing under the influence of visual attacks. Attacks of four different types were considered: simple, involving the addition of white Gaussian noise, impulse action on one pixel of an image, and attacks that change brightness values within a rectangular area. MNIST and Kaggle dogs vs. cats datasets were chosen. Recognition characteristics were obtained for the accuracy, depending on the number of images subjected to attacks and the types of attacks used in the training. The study was based on well-known convolutional neural network architectures used in pattern recognition tasks, such as VGG-16 and Inception_v3. The dependencies of the recognition accuracy on the parameters of visual attacks were obtained. Original methods were proposed to prevent visual attacks. Such methods are based on the selection of “incomprehensible” classes for the recognizer, and their subsequent correction based on neural network inference with reduced image sizes. As a result of applying these methods, gains in the accuracy metric by a factor of 1.3 were obtained after iteration by discarding incomprehensible images, and reducing the amount of uncertainty by 4–5% after iteration by applying the integration of the results of image analyses in reduced dimensions.

scholarly journals Future behavior of wind wave extremes due to climate change

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hector Lobeto ◽  
Melisa Menendez ◽  
Iñigo J. Losada
Keyword(s):  
Climate Change ◽  
Wave Climate ◽  
Climate Change Scenarios ◽  
Return Periods ◽  
Extreme Wave ◽  
Future Behavior ◽  
Climate Simulations ◽  
Wave Conditions ◽  
Ne Pacific ◽  
Change In Mean

AbstractExtreme waves will undergo changes in the future when exposed to different climate change scenarios. These changes are evaluated through the analysis of significant wave height (Hs) return values and are also compared with annual mean Hs projections. Hourly time series are analyzed through a seven-member ensemble of wave climate simulations and changes are estimated in Hs for return periods from 5 to 100 years by the end of the century under RCP4.5 and RCP8.5 scenarios. Despite the underlying uncertainty that characterizes extremes, we obtain robust changes in extreme Hs over more than approximately 25% of the ocean surface. The results obtained conclude that increases cover wider areas and are larger in magnitude than decreases for higher return periods. The Southern Ocean is the region where the most robust increase in extreme Hs is projected, showing local increases of over 2 m regardless the analyzed return period under RCP8.5 scenario. On the contrary, the tropical north Pacific shows the most robust decrease in extreme Hs, with local decreases of over 1.5 m. Relevant divergences are found in several ocean regions between the projected behavior of mean and extreme wave conditions. For example, an increase in Hs return values and a decrease in annual mean Hs is found in the SE Indian, NW Atlantic and NE Pacific. Therefore, an extrapolation of the expected change in mean wave conditions to extremes in regions presenting such divergences should be adopted with caution, since it may lead to misinterpretation when used for the design of marine structures or in the evaluation of coastal flooding and erosion.

An algebraic approach to N-soft sets with application in decision-making using TOPSIS

2021 ◽  
pp. 1-21
Author(s):  
Muhammad Shabir ◽  
Rimsha Mushtaq ◽  
Munazza Naz
Keyword(s):  
Decision Making ◽  
Mathematical Models ◽  
Real World ◽  
Algebraic Approach ◽  
Multi Criteria Decision Making ◽  
Commutative Monoids ◽  
Soft Sets ◽  
Algebraic Properties ◽  
Different Types ◽  
Selection Of

In this paper, we focus on two main objectives. Firstly, we define some binary and unary operations on N-soft sets and study their algebraic properties. In unary operations, three different types of complements are studied. We prove De Morgan’s laws concerning top complements and for bottom complements for N-soft sets where N is fixed and provide a counterexample to show that De Morgan’s laws do not hold if we take different N. Then, we study different collections of N-soft sets which become idempotent commutative monoids and consequently show, that, these monoids give rise to hemirings of N-soft sets. Some of these hemirings are turned out as lattices. Finally, we show that the collection of all N-soft sets with full parameter set E and collection of all N-soft sets with parameter subset A are Stone Algebras. The second objective is to integrate the well-known technique of TOPSIS and N-soft set-based mathematical models from the real world. We discuss a hybrid model of multi-criteria decision-making combining the TOPSIS and N-soft sets and present an algorithm with implementation on the selection of the best model of laptop.

scholarly journals Outlier Detection at the Parcel-Level in Wheat and Rapeseed Crops Using Multispectral and SAR Time Series

2021 ◽  
Vol 13 (5) ◽  
pp. 956
Author(s):  
Florian Mouret ◽  
Mohanad Albughdadi ◽  
Sylvie Duthoit ◽  
Denis Kouamé ◽  
Guillaume Rieu ◽  
...  
Keyword(s):  
Outlier Detection ◽  
Experimental Validation ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Multispectral Images ◽  
Vegetation Indexes ◽  
Crop Development ◽  
Different Types ◽  
Selection Of ◽  
Sentinel 2

This paper studies the detection of anomalous crop development at the parcel-level based on an unsupervised outlier detection technique. The experimental validation is conducted on rapeseed and wheat parcels located in Beauce (France). The proposed methodology consists of four sequential steps: (1) preprocessing of synthetic aperture radar (SAR) and multispectral images acquired using Sentinel-1 and Sentinel-2 satellites, (2) extraction of SAR and multispectral pixel-level features, (3) computation of parcel-level features using zonal statistics and (4) outlier detection. The different types of anomalies that can affect the studied crops are analyzed and described. The different factors that can influence the outlier detection results are investigated with a particular attention devoted to the synergy between Sentinel-1 and Sentinel-2 data. Overall, the best performance is obtained when using jointly a selection of Sentinel-1 and Sentinel-2 features with the isolation forest algorithm. The selected features are co-polarized (VV) and cross-polarized (VH) backscattering coefficients for Sentinel-1 and five Vegetation Indexes for Sentinel-2 (among us, the Normalized Difference Vegetation Index and two variants of the Normalized Difference Water). When using these features with an outlier ratio of 10%, the percentage of detected true positives (i.e., crop anomalies) is equal to 94.1% for rapeseed parcels and 95.5% for wheat parcels.

scholarly journals Heterogeneity of mesenchymal stem cells in cartilage regeneration: from characterization to application

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Kangkang Zha ◽  
Xu Li ◽  
Zhen Yang ◽  
Guangzhao Tian ◽  
Zhiqiang Sun ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Articular Cartilage ◽  
Cartilage Repair ◽  
Cartilage Damage ◽  
Cartilage Regeneration ◽  
Great Promise ◽  
Traditional Treatment ◽  
Different Types ◽  
Selection Of

AbstractArticular cartilage is susceptible to damage but hard to self-repair due to its avascular nature. Traditional treatment methods are not able to produce satisfactory effects. Mesenchymal stem cells (MSCs) have shown great promise in cartilage repair. However, the therapeutic effect of MSCs is often unstable partly due to their heterogeneity. Understanding the heterogeneity of MSCs and the potential of different types of MSCs for cartilage regeneration will facilitate the selection of superior MSCs for treating cartilage damage. This review provides an overview of the heterogeneity of MSCs at the donor, tissue source and cell immunophenotype levels, including their cytological properties, such as their ability for proliferation, chondrogenic differentiation and immunoregulation, as well as their current applications in cartilage regeneration. This information will improve the precision of MSC-based therapeutic strategies, thus maximizing the efficiency of articular cartilage repair.

scholarly journals Optimizing the Power Take Off of a Wave Energy Converter With Regard to the Wave Climate

2005 ◽  
Vol 128 (1) ◽  
pp. 56-64 ◽  
Author(s):  
Gaelle Duclos ◽  
Aurelien Babarit ◽  
Alain H. Clément
Keyword(s):  
Wave Energy ◽  
Simple Wave ◽  
Wave Climate ◽  
Wave Energy Converter ◽  
Optimal Parameters ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Classical Wave ◽  
Project Site ◽  
Wave Conditions

Considered as a source of renewable energy, wave is a resource featuring high variability at all time scales. Furthermore wave climate also changes significantly from place to place. Wave energy converters are very often tuned to suit the more frequent significant wave period at the project site. In this paper we show that optimizing the device necessitates accounting for all possible wave conditions weighted by their annual occurrence frequency, as generally given by the classical wave climate scatter diagrams. A generic and very simple wave energy converter is considered here. It is shown how the optimal parameters can be different considering whether all wave conditions are accounted for or not, whether the device is controlled or not, whether the productive motion is limited or not. We also show how they depend on the area where the device is to be deployed, by applying the same method to three sites with very different wave climate.

Fire spreading experiments on heterogeneous fuel beds. Applications of percolation theory

2000 ◽  
Vol 30 (8) ◽  
pp. 1318-1328 ◽  
Author(s):  
Jean Nahmias ◽  
Hervé Téphany ◽  
José Duarte ◽  
Sophie Letaconnoux
Keyword(s):  
Experimental Work ◽  
Percolation Theory ◽  
Dynamic Behaviour ◽  
Fire Spread ◽  
Directed Percolation ◽  
Final State ◽  
Critical Thresholds ◽  
Scale Models ◽  
Different Types ◽  
Fire Spreading

In the experimental work presented here, fire spread was studied through various laboratory and full-scale models containing different types of combustible and noncombustible materials. We have examined the dynamic behaviour of the flame front and the final state (after extinction) on randomly created heterogeneous zones, both with and without wind. The principal conclusion is that critical thresholds exist, for the ratio between combustible and noncombustible parts, at the transition between nonpropagation and propagation of the fire. This result is common to all types of spreading (with or without wind). The values of the critical thresholds in the nonwind-driven experiments are those of the percolation theory. The critical exponent, obtained for wind-driven experiments, is in accordance with current values suggested by the directed percolation approach.

Features Extraction and Classification Methods for Automatic Selection of Two Different Types of Paint for Automotive Parts

2021 ◽  
Author(s):  
Deborah Martínez ◽  
Rafael Guzmán-Cabrera ◽  
Daniel A. May-Arrioja ◽  
Iván Hernández-Romano ◽  
Miguel Torres-Cisneros
Keyword(s):  
Features Extraction ◽  
Classification Methods ◽  
Automatic Selection ◽  
Different Types ◽  
Automotive Parts ◽  
Selection Of
Sign in / Sign up

Export Citation Format

Share Document