Variations des efforts hydrodynamiques sur radiers horizontal et affouillé en aval d'un dissipateur d'énergie de type auge

2007 ◽  
Vol 34 (7) ◽  
pp. 890-894
Author(s):  
A El Amri ◽  
J L Verrette

The distribution of the hydrodynamic efforts under solid horizontal or scoured bed downstream of a roller bucket spillway can be represented by two typical distributions: type A and B for pressure and type I and II for pressure fluctuation. However, the scoured bed presents a pressure distribution that is closer to the equilibrium pressure compared with that of the horizontal bed and a much lower pressure fluctuation distribution. This could be due to the bed scour in the vicinity of the bucket that carries an effective value for the height of the bucket lip, which decreases the suction effect, and the fact that the eroded shape of the bed corresponds with reduced pressure efforts, which translates into weaker turbulence and therefore a more stable flow. These results show the advantage of a scoured bed that could be more secure when the bucket lip height of the roller bucket spillway is well chosen.Key words: hydrodynamic efforts, pressure, pressure fluctuation, hydraulic energy dissipation, roller bucket.

Open Physics ◽  
2019 ◽  
Vol 17 (1) ◽  
pp. 320-328
Author(s):  
Delin Sun ◽  
Minggao Zhu

Abstract In this paper, the energy dissipation in a bolted lap joint is studied using a continuum microslip model. Five contact pressure distributions compliant with the power law are considered, and all of them have equal pretension forces. The effects of different pressure distributions on the interface stick-slip transitions and hysteretic characteristics are presented. The calculation formulation of the energy dissipation is introduced. The energy dissipation results are plotted on linear and log-log coordinates to investigate the effect of the pressure distribution on the energy distribution. It is shown that the energy dissipations of the lap joints are related to the minimum pressure in the overlapped area, the size of the contact area and the value of the power exponent. The work provides a theoretical basis for further effective use of the joint energy dissipation.


2016 ◽  
Vol 24 (1) ◽  
pp. 75-80 ◽  
Author(s):  
Tilo Kölbel ◽  
Christian Detter ◽  
Sebastian W. Carpenter ◽  
Fiona Rohlffs ◽  
Yskert von Kodolitsch ◽  
...  

Purpose: To describe the combined use of a tubular stent-graft for the ascending aorta and an inner-branched arch stent-graft for patients with acute type A aortic dissection. Technique: The technique to deploy these modular, custom-made stent-grafts is demonstrated in 2 patients with acute DeBakey type I aortic dissections and significant comorbidities precluding open surgery. Both emergent procedures were made possible by the availability of suitable devices manufactured for elective repair in other patients. After preliminary carotid-subclavian bypass, a long Lunderquist guidewire was introduced from the right femoral artery to the left ventricle for delivery of the Zenith Ascend and Zenith Branched Arch Endovascular Grafts under inflow occlusion. Bridging stent-grafts were delivered to the innominate and left common carotid arteries to connect to the 2 inner branches; the left subclavian artery was occluded. Both cases were technically successful and resulted in exclusion of the false lumen in the ascending aorta. The operating and fluoroscopy times did not exceed those of comparable elective procedures. The patients were rapidly extubated shortly after the procedure and without serious immediate complications. One patient survived 11 months with a satisfactory repair; the other succumbed to complications of recurrent pneumonia after 23 days. Conclusion: Endovascular treatment of patients with acute type A aortic dissection using a combination of tubular and branched stent-grafts in the ascending aorta is feasible and offers an alternative strategy to open surgery.


Aorta ◽  
2015 ◽  
Vol 03 (06) ◽  
pp. 195-198
Author(s):  
Guillermo Stöger ◽  
Matías Ríos ◽  
Roberto Battellini ◽  
Daniel Bracco ◽  
Vadim Kotowicz

AbstractThe correct management of acute Type A dissection continues to be a challenge. The primary goal is to save the patient´s life. However, the decision regarding the surgical approach determines possible later complications. We present the case of a 59-year-old female patient with a past history of emergent surgery for acute Type A dissection treated by supracoronary ascending and aortic valve replacement 19 years previously. Later, in a second endovascular approach, the descending aorta was treated by a thoracic endoprosthesis. During follow-up a dilated aortic root and a Type I endoleak were observed, and complex reoperation was required. We performed a total aortic arch replacement with a 4-branched graft and a complete aortic root replacement using the Cabrol technique for the reinsertion of the coronary arteries. The mechanical aortic normally functioning valve was preserved. The patient was discharged 30 days postoperatively.


Aorta ◽  
2021 ◽  
Vol 09 (01) ◽  
pp. 030-032
Author(s):  
Sergey Y. Boldyrev ◽  
Kirill O. Barbukhatty ◽  
Vladimir A. Porhanov

AbstractSurgical treatment of Type-A acute aortic dissection is associated with high mortality and morbidity. One of the reasons is perioperative bleeding, which may lead to worse outcomes. We present a case of successful treatment of a patient with 18-litre perioperative blood loss in DeBakey Type-I acute aortic dissection with drug-induced hypocoagulation and malperfusion of a lower extremity.


2020 ◽  
Vol 72 (4) ◽  
pp. 1206-1212
Author(s):  
Amy B. Reed ◽  
Patrick Self ◽  
Michael Rosenberg ◽  
Rumi Faizer ◽  
R. James Valentine

Author(s):  
SL Cheng ◽  
SY Du ◽  
XS Yan ◽  
Q Guo ◽  
YJ Xin

Two types of clapboard-type lead dampers were designed based on plastic energy absorption of lead metal. The hysteretic curves and energy dissipation properties were studied through low cyclic loading test. Also, the typical restoring load model was extracted. The finite-element numerical model of type-A damper was build according to the characteristics and principle of clapboard-type lead dampers. And the damping effect of high-structural Benchmark model installed with type-A damper was analyzed. The results show that the structure of clapboard-type lead dampers is simple, hysteretic curves are plump, hysteretic properties are steady and yield displacement is small, and thus its energy dissipation ability is excellent. The models of finite element and restoring load of dampers are in good agreement with the results of tests, so they have good applicability. The seismic system installed with type-A dampers has an excellent vibration reduction effect. The top-floor acceleration and displacement control effects are 26.7% and 37.4%, respectively.


2019 ◽  
Vol 70 (3) ◽  
pp. e68-e69
Author(s):  
Amy B. Reed ◽  
Michael Rosenberg ◽  
Patrick Self ◽  
Rumi Faizer ◽  
R. James Valentine

Blood ◽  
2011 ◽  
Vol 118 (21) ◽  
pp. 2514-2514
Author(s):  
Colin G Edwards ◽  
Kati Maharry ◽  
Krzysztof Mrózek ◽  
Sebastian Schwind ◽  
Peter Paschka ◽  
...  

Abstract Abstract 2514 Approximately 8% of de novo AML pts have inv(16)(p13q22) or t(16;16)(p13;q22) [inv(16)] and this cytogenetic group is associated with high complete remission (CR) rates and a relatively favorable outcome after cytarabine/daunorubicin (ara-c/dnr)-based induction and high-dose ara-c (HiDAC) consolidation therapy. However, ∼40% of these pts still relapse. The molecular mechanisms that impact on the prognosis of inv(16) pts remain to be fully elucidated. We and others reported that presence of the mutated KIT (mutKIT) gene is associated with worse outcome, but other contributing factors may play a role. Molecularly, inv(16) results in disruption of the MYH11 gene at 16p13 and CBFB gene at 16q22, creating a CBFB-MYH11 fusion gene. Since the genomic breakpoints within CBFB and MYH11 are variable and the fusion transcripts depend on the exons fused, at least 11 different sized CBFB-MYH11 fusion transcript variants have been found. The frequency of each fusion varies, with ∼85% being type A and ∼5% each types D and E; types B, C, and F-K were reported in single cases (hereafter we refer to non-type A fusions as “rare”). To our knowledge, only one study (Schnittger et al. Leukemia 2007;21:725) has examined the biological and clinical significance of rare CBFB-MYH11 fusions in AML. Fusion type was not found to be prognostic, but the cohort included pts with therapy-related and secondary AML. Thus, further studies are warranted. Accordingly, we analyzed 149 de novo CBFB-MYH11 positive AML pts aged <60 years (y; median, 40 y; range 18–59) receiving ara-c/dnr-based induction and HiDAC consolidation therapy (Cancer and Leukemia Group B protocols 9621, 19808, 10503). Among 149 pts, 129 (87%) had type A fusion, 17 (11%) type E, 2 (1%) type D, and 1 (<1%) type I. Pts with rare fusions had lower white blood cell counts (P=.02; median, 18.9 v 27.5 ×109/L), less often skin infiltration (P=.04; 0% v 18%) and tended to have FAB subtype M4Eo less often than the type A fusion pts (P=.13; 67% v 85%). Eighteen rare and 100 type A fusion pts had at least 1.7 y follow-up and thus could be analyzed for outcome. No significant differences in CR rates (P=1.00; 94% v 92%), cumulative incidence of relapse (CIR; P=.16; 5 y rates, 30% v 47%) or overall survival (OS; P=.30; 5 y rates, 78% v 60%) were found between rare and type A fusion pts. However, a trend toward longer event-free survival (EFS) was observed for rare fusion pts compared with type A pts (P=.07; 5 y rates, 66% v 42%; Figure). In an analysis of secondary cytogenetic abnormalities (abns) we found trisomies 8, 13 and 21 were more frequent in rare fusion pts than in type A pts (P=.03; P=.07; P<.001, respectively). Of the rare fusion pts, 44% had at least one of +8, +13 or +21 compared to only 11% of the type A pts. No rare fusion transcript pt harbored +22, which was present in 24 (19%) pts with type A fusion (P=.05; Table]. Strikingly, no rare fusion pt had mutKIT compared with 29% of type A fusion pts (P=.01). Given that +22 has been associated with improved and mutKIT with worse outcome, we also assessed the impact of fusion transcript type by restricting our analysis first to pts with no +22, then to pts without mutKIT, and finally excluding both +22 and mutKIT. No significant differences in CR rates, CIR, OS or EFS were observed between the two groups. We conclude that the type of fusion transcript does not appear to affect significantly the prognosis of inv(16) pts, although a favorable trend for pts with the rare transcript exists. Type A and rare fusion pts differ with regard to distribution of accompanying genetic or cytogenetic alterations, such as KIT mutation or +22, which did not occur in any of the rare fusion pts. Further studies are required to elucidate if the rare fusion transcripts themselves created the necessary biologic conditions that exclude the concurrent presence of the genome aberrations.Table.Secondary abns in pts with rare v type A fusionsAbn type*Rare fusion (n=20†) No. pts (%)Type A fusion (n=129) No. pts (%)P‡None [sole inv(16)]8 (44)81 (63).20+220 (0)24 (19).05+85 (28)11 (9).03+215 (28)2 (2)<.001+132 (11)2 (2).07At least one +8 or +13 or +218 (44)14 (11).001del(7q)/add(7q)0 (0)7 (5).60Other2 (11)11 (9).66*Pts may have multiple secondary abns.†2 unknown.‡Fisher's exact test. Disclosures: No relevant conflicts of interest to declare.


1996 ◽  
Vol 3 (11) ◽  
pp. 1168-1169
Author(s):  
J.L. Guéant ◽  
A. Safi ◽  
H. Rabesona ◽  
A. Morali ◽  
M. Vidailhet ◽  
...  
Keyword(s):  
Type A ◽  

Author(s):  
Weichen Ren ◽  
Jianhua Wu ◽  
Fei Ma ◽  
Shangtuo Qian

Abstract Aiming to achieve energy dissipation and prevention of cavitation erosion, a kind of dropshaft in urban drainage systems, called helical-step dropshaft, is introduced in this paper. It dissipates flow energy by means of step geometry and prevent cavitation erosion through air entrainment. To verify its availability, the hydraulic characteristics of the helical-step dropshaft were experimentally investigated, including the flow regimes, the efficiency of energy dissipation, characteristics of air entrainment and pressure distribution. The results demonstrate that, even for a large discharge, flow can be discharged smoothly and steadily, and a high energy-dissipation rate of over 87% is achieved. There are three distinct flow regimes observed in the dropshaft, namely nappe flow, mixed flow and skimming flow. Moreover, there is no less than 1.6% air concentration and a reasonable pressure distribution on the step surface. This study provides an attractive alternative for the design of drop structures.


Sign in / Sign up

Export Citation Format

Share Document