Magma emplacement in a convergent tectonic orogen, southern Revillagigedo Island, southeastern Alaska

1991 ◽  
Vol 28 (6) ◽  
pp. 929-938 ◽  
Author(s):  
M. L. Crawford ◽  
W. A. Crawford
Keyword(s):  
Shear Zone ◽  
Country Rock ◽  
Shear Zones ◽  
Igneous Rocks ◽  
Border Zone ◽  
Metamorphic Belt ◽  
Lithostratigraphic Units ◽  
Southern Border ◽  
Compressional Deformation ◽  
Oriented Parallel

The western metamorphic belt of the British Columbia – Alaska coastal orogen consists of lithostratigraphic units assigned to the Taku terrane and the Gravina sequence. On Revillagigedo Island and Cleveland Peninsula in the Ketchikan quadrangle of southeastern Alaska, greenschist- and amphibolite-grade schists of the western metamorphic belt are intruded by mid-Cretaceous tonalite and leucotonalite plutons and sills. A number of these igneous bodies are spatially associated with northwest-trending shear zones developed along thrust faults that formed during the main phase of metamorphism of the schists. Observations of field relations and structural fabric in the igneous rocks and the country-rock schist show the following: (i) Along the southern shore of Revillagigedo Island, the Moth Bay pluton was emplaced along a shear zone. Magmatic and submagmatic flow foliation in the southern border zone of the pluton parallels foliations in the sheared country rock; rocks in the interior of the pluton are generally unfoliated. (ii) At Carroll Point a group of sills intrude along the same shear zone. In some of the sills, tabular plagioclase phenocrysts are oriented parallel to the shear fabric. (iii) Foliation-parallel sills lie within a shear zone that separates Gravina sequence and Taku terrane rocks at Point Francis on Cleveland Peninsula. Older sills within the shear zone are deformed, and younger intrusions are unfoliated and cut across the fabric. Based on these and similar observations elsewhere in the area, we suggest the mid-Cretaceous tonalite and leucotonalite magmas in the Ketchikan quadrangle intruded during the regional compressional deformation that formed the shear zones.

Mafic igneous rocks and mineralisation in the Palaeoproterozoic Ketilidian orogen, South-East Greenland: project SUPRASYD 1996

1997 ◽  
pp. 66-74
Author(s):  
Henrik Stendal ◽  
Wulf Mueller ◽  
Nicolai Birkedal ◽  
Esben I. Hansen ◽  
Claus Østergaard
Keyword(s):  
Mineral Exploration ◽  
Volcanic Rocks ◽  
Shear Zones ◽  
Field Work ◽  
Igneous Rocks ◽  
Border Zone ◽  
The South ◽  
East Greenland ◽  
North West ◽  
Arc Setting

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Stendal, H., Mueller, W., Birkedal, N., Hansen, E. I., & Østergaard, C. (1997). Mafic igneous rocks and mineralisation in the Palaeoproterozoic Ketilidian orogen, South-East Greenland: project SUPRASYD 1996. Geology of Greenland Survey Bulletin, 176, 66-74. https://doi.org/10.34194/ggub.v176.5064 _______________ The multidisciplinary SUPRASYD project (1992–96) focused on a regional investigation of the Palaeoproterozoic Ketilidian orogenic belt which crosses the southern tip of Greenland. Apart from a broad range of geological and structural studies (Nielsen et al., 1993; Garde & Schønwandt, 1994, 1995; Garde et al., 1997), the project included a mineral resource evaluation of the supracrustal sequences associated with the Ketilidian orogen (e.g. Mosher, 1995). The Ketilidian orogen of southern Greenland can be divided from north-west to south-east into: (1) a border zone in which the crystalline rocks of the Archaean craton are unconformably overlain by Ketilidian supracrustal rocks; (2) a major polyphase pluton, referred to as the Julianehåb batholith; and (3) extensive areas of Ketilidian supracrustal rocks, divided into psammitic and pelitic rocks with subordinate interstratified mafic volcanic rocks (Fig. 1). The Julianehåb batholith is viewed as emplaced in a magmatic arc setting; the supracrustal sequences south of the batholith have been interpreted as either (1) deposited in an intra-arc and fore-arc basin (Chadwick & Garde, 1996), or (2) deposited in a back-arc or intra-arc setting (Stendal & Swager, 1995; Swager, 1995). Both possibilities are plausible and infer subduction-related processes. Regional compilations of geological, geochemical and geophysical data for southern Greenland have been presented by Thorning et al. (1994). Mosher (1995) has recently reviewed the mineral exploration potential of the region. The commercial company Nunaoil A/S has been engaged in gold prospecting in South Greenland since 1990 (e.g. Gowen et al., 1993). A principal goal of the SUPRASYD project was to test the mineral potential of the Ketilidian supracrustal sequences and define the gold potential in the shear zones in the Julianehåb batholith. Previous work has substantiated a gold potential in amphibolitic rocks in the south-west coastal areas (Gowen et al., 1993.), and in the amphibolitic rocks of the Kutseq area (Swager et al., 1995). Field work in 1996 was focused on prospective gold-bearing sites in mafic rocks in South-East Greenland. Three M.Sc. students mapped showings under the supervision of the H. S., while an area on the south side of Kangerluluk fjord was mapped by H. S. and W. M. (Fig. 4).

Regional setting and kinematic features of the Needle Falls Shear Zone, Trans-Hudson Orogen

1993 ◽  
Vol 30 (7) ◽  
pp. 1338-1354 ◽  
Author(s):  
Mel R. Stauffer ◽  
John F. Lewry
Keyword(s):  
Shear Zone ◽  
Simple Shear ◽  
Country Rock ◽  
Shear Zones ◽  
Small Scale ◽  
Lake Zone ◽  
Shear Sense ◽  
Regional Tectonic ◽  
Ductile Shear ◽  
Shear Sense Indicators

Needle Falls Shear Zone is the southern part of a major northeast-trending ductile shear system within the Paleoproterozoic Trans-Hudson Orogen in Saskatchewan. Throughout its exposed length of ~400 km, the shear zone separates reworked Archean continental crust and infolded Paleoproterozoic supracrustals of the Cree Lake Zone, to the northwest, from mainly juvenile Paleoproterozoic arc terrains and granitoid plutons of the Reindeer Zone, to the southeast. It also defines the northwest margin of the ca. 1855 Ma Wathaman Batholith, which forms the main protolith to shear zone mylonites. Although not precisely dated, available age constraints suggest that the shear zone formed between ca. 1855 and 1800 Ma, toward the end of peak thermotectonism in this part of the orogen.In the Needle Falls study area, shear zone mylonites exhibit varied, sequentially developed, ductile to brittle fabric features, including C–S fabrics, winged porphyroclasts (especially delta type), small-scale compressional and extensional microfaults ranging from thin ductile shear zones to late brittle faults, early isoclinal and sheath folds, later asymmetric folds related to compressional microfaults, and variably rotated and (or) folded quartz veins. All ductile shear-sense indicators suggest dextral displacement, as do most later ductile–brittle transition and brittle features. In conjunction with a gently north–northeast-plunging extension lineation, such data indicate oblique east-side-up dextral movement across the shear zone. However, preexisting structures in country rock protoliths rotate into the shear zone in a sense contrary to that predicted by ideal dextral simple shear, a feature thought to reflect significant flattening across the shear zone. Other ductile to brittle fabric elements in the mylonites are consistent with general noncoaxial strain, rather than ideal simple shear. Amount of displacement cannot be measured but indirect estimates suggest approximately 40 ± 20 km.The Needle Falls Shear Zone is too small and has developed too late in regional tectonic history to be considered a crustal suture. Rather, it is interpreted as either a late-tectonic oblique collisional structure or as the result of counterclockwise oroclinal rotation of the southern part of the orogen.

scholarly journals The Dabie Extensional Tectonic System: Structural Framework

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Quanlin Hou ◽  
Hongyuan Zhang ◽  
Qing Liu ◽  
Jun Li ◽  
Yudong Wu
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Ultrahigh Pressure ◽  
Metamorphic Complex ◽  
The South ◽  
Magma Intrusion ◽  
The North ◽  
Extensional Tectonic ◽  
Mechanism Transition ◽  
Tectonic System

A previous study of the Dabie area has been supposed that a strong extensional event happened between the Yangtze and North China blocks. The entire extensional system is divided into the Northern Dabie metamorphic complex belt and the south extensional tectonic System according to geological and geochemical characteristics in our study. The Xiaotian-Mozitan shear zone in the north boundary of the north system is a thrust detachment, showing upper block sliding to the NNE, with a displacement of more than 56 km. However, in the south system, the shearing direction along the Shuihou-Wuhe and Taihu-Mamiao shear zones is tending towards SSE, whereas that along the Susong-Qingshuihe shear zone tending towards SW, with a displacement of about 12 km. Flinn index results of both the north and south extensional systems indicate that there is a shear mechanism transition from pure to simple, implying that the extensional event in the south tectonic system could be related to a magma intrusion in the Northern Dabie metamorphic complex belt. Two 40Ar-39Ar ages of mylonite rocks in the above mentioned shear zones yielded, separately, ~190 Ma and ~124 Ma, referring to a cooling age of ultrahigh-pressure rocks and an extensional era later.

Effect of kinematics of orogenic wedge on kinematic evolutionary paths and deformation profiles of major shear zones: An example from the eastern Himalaya 

2021 ◽  
Author(s):  
Pritam Ghosh ◽  
Kathakali Bhattacharyya
Keyword(s):  
Shear Zone ◽  
Strain Softening ◽  
Leading Edge ◽  
Shear Zones ◽  
Deformation History ◽  
Progressive Deformation ◽  
Trailing Edge ◽  
Orogenic Wedge ◽  
Transport Direction ◽  
Evolutionary Paths

<p>We examine how the deformation profile and kinematic evolutionary paths of two major shear zones with prolonged deformation history and large translations differ with varying structural positions along its transport direction in an orogenic wedge. We conduct this analysis on multiple exposures of the internal thrusts from the Sikkim Himalayan fold thrust belt, the Pelling-Munsiari thrust (PT), the roof thrust of the Lesser Himalayan duplex (LHD), and the overlying Main Central thrust (MCT). These two thrusts are regionally folded due to growth of the LHD and are exposed at different structural positions. The hinterlandmost exposures of the MCT and PT zones lie in the trailing parts of the duplex, while the foreland-most exposures of the same studied shear zones lie in the leading part of the duplex, and thus have recorded a greater connectivity with the duplex. The thicknesses of the shear zones progressively decrease toward the leading edge indicating variation in deformation conditions. Thickness-displacement plot reveals strain-softening from all the five studied MCT and the PT mylonite zones. However, the strain-softening mechanisms varied along its transport direction with the hinterland exposures recording dominantly dislocation-creep, while dissolution-creep and reaction-softening are dominant in the forelandmost exposures. Based on overburden estimation, the loss of overburden on the MCT and the PT zones is more in the leading edge (~26km and ~15km, respectively) than in the trailing edge (~10km and ~17km, respectively), during progressive deformation. Based on recalibrated recrystallized quartz grain thermometer (Law, 2014), the estimated deformation temperatures in the trailing edge are higher (~450-650°C) than in the leading edge (350-550°C) of the shear zones. This variation in the deformation conditions is also reflected in the shallow-crustal deformation structures with higher fracture intensity and lower spacing in the leading edge exposures of the shear zones as compared to the trailing edge exposures.</p><p>The proportion of mylonitic domains and micaceous minerals within the exposed shear zones increase and grain-size of the constituent minerals decreases progressively along the transport direction. This is also consistent with progressive increase in mean R<sub>s</sub>-values toward leading edge exposures of the same shear zones. Additionally, the α-value (stretch ratio) gradually increases toward the foreland-most exposures along with increasing angular shear strain. Vorticity estimates from multiple incremental strain markers indicate that the MCT and PT zones generally record a decelerating strain path. Therefore, the results from this study are counterintuitive to the general observation of a direct relationship between higher Rs-value and higher pure-shear component. We explain this observation in the context of the larger kinematics of the orogen, where the leading edge exposures have passed through the duplex structure, recording the greatest connectivity and most complete deformation history, resulting in the weakest shear zone that is also reflected in the deformation profiles and strain attributes. This study demonstrates that the same shear zone records varying deformation profile, strain and kinematic evolutionary paths due to varying deformation conditions and varying connectivity to the underlying footwall structures during progressive deformation of an orogenic wedge.</p>

Comment on “Miocene to Quaternary tectonostratigraphic evolution of the middle section of the Burdur-Fethiye Shear Zone, south-western Turkey: Implications for the wide inter-plate shear zones. Tectonophysics 690, 336–354”

2018 ◽  
Vol 722 ◽  
pp. 595-600 ◽  
Author(s):  
M. Cihat Alçiçek ◽  
Lars W. van den Hoek Ostende ◽  
Gerçek Saraç ◽  
Alexey S. Tesakov ◽  
Alison M. Murray ◽  
...  
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Middle Section ◽  
Western Turkey

Late Carboniferous Schlingen in the Gotthard nappe (Central Alps) and their relation to the Variscan evolution

2021 ◽  
Author(s):  
Mario Buehler ◽  
Roger Zurbriggen ◽  
Alfons Berger ◽  
Marco Herwegh ◽  
Daniela Rubatto
Keyword(s):  
Shear Zone ◽  
Country Rock ◽  
Structural Evolution ◽  
Point Of View ◽  
Swiss Alps ◽  
Low Grade ◽  
Central Alps ◽  
Structural Investigations ◽  
Alpine Belt ◽  
Main Cluster

<p>Many pre‐Mesozoic basements of the Alpine belt contain kilometre‐scaled folds with steeply inclined axial planes and fold axes. Those structures are referred to as Schlingen folds. They deform polymetamorphic gneisses, often Late‐Ordovician metagranitoids and are cross‐cut themselves by Permian intrusions. However, the structural evolution of such Schlingen is still not completely understood and their geodynamic significance for the Variscan evolution is not clear. To close this gap, this study investigates in detail a well-preserved Schlingen structure in the Gotthard nappe (Central Swiss Alps). This Schlingen fold evolved by a combination of shearing and folding under amphibolite facies conditions. Detailed digital field mapping coupled with petrological and structural investigations reveal local synkinematic migmatisation in the fold hinges parallel to axial planes. U‐Pb dating of zircons separated from associated leucosomes reveal cores that record a detrital country rock age of 450 ± 3 Ma, and rims with a range of dates from 270 to 330 Ma. The main cluster defines an age of 316 ± 4 Ma. We ascribe this Late‐Carboniferous age to peak metamorphic conditions of the late‐Variscan Schlingen phase.</p><p>The pre-Schlingen structures are subdivided into three older deformation events, which are connected to the Cenerian and post-Cenerian deformations. In addition, until now unknown, post Schlingen-, but pre-Alpine transpressional deformation have been detected and described. This superimposed deformation produced locally a low-grade foliation and minor undulation of the Schlingen structures.</p><p>The detail data of the investigated fold structures are linked with already described Schlingen folds in the wider Alpine realm, which all are concentrated in the most southern parts of the Variscides. From a geodynamic point of view and based on the new tectono-metamorphic constraints, we propose Schlingen formation preceded and concurred the crustal-scale transpressional tectonics of the East Variscan Shear Zone. This scenario separates, at least in a structural sense, the Southern Variscides from more northern parts (also Gondwana derived) inside Pangea, where Schlingen folds are absent.</p>

scholarly journals The internal structure and composition of a plate boundary-scale serpentinite shear zone: The Livingstone Fault, New Zealand

2019 ◽  
Author(s):  
Matthew S. Tarling ◽  
Steven A. F. Smith ◽  
James M. Scott ◽  
Jeremy S. Rooney ◽  
Cecilia Viti ◽  
...  
Keyword(s):  
New Zealand ◽  
Internal Structure ◽  
Shear Zone ◽  
Plate Boundary ◽  
Shear Zones ◽  
East Side ◽  
Local Dispersion ◽  
Fine Grained ◽  
Shear Sense ◽  
Tectonic Settings

Abstract. Deciphering the internal structural and composition of large serpentinite-dominated shear zones will lead to an improved understanding of the rheology of the lithosphere in a range of tectonic settings. The Livingstone Fault in New Zealand is a > 1000 km long terrane-bounding structure that separates the basal portions (peridotite; serpentinised peridotite; metagabbros) of the Dun Mountain Ophiolite Belt from quartzofeldspathic schists of the Caples or Aspiring Terranes. Field and microstructural observations from eleven localities along a strike length of c. 140 km show that the Livingstone Fault is a steeply-dipping, serpentinite-dominated shear zone tens to several hundreds of metres wide. The bulk shear zone has a pervasive scaly fabric that wraps around fractured and faulted pods of massive serpentinite, rodingite and partially metasomatised quartzofeldspathic schist up to a few tens of metres long. S-C fabrics and lineations in the shear zone consistently indicate a steep Caples-side-up (i.e. east-side-up) shear sense, with significant local dispersion in kinematics where the shear zone fabrics wrap around pods. The scaly fabric is dominated (> 98 vol %) by fine-grained (≪ 10 μm) fibrous chrysotile and lizardite/polygonal serpentine, but infrequent (

scholarly journals Kinematics and Timing Constraints in a Transpressive Tectonic Regime: The Example of the Posada-Asinara Shear Zone (NE Sardinia, Italy)

Geosciences ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 288
Author(s):  
Rodolfo Carosi ◽  
Alessandro Petroccia ◽  
Salvatore Iaccarino ◽  
Matteo Simonetti ◽  
Antonio Langone ◽  
...  
Keyword(s):  
Shear Zone ◽  
Finite Strain ◽  
Pure Shear ◽  
Deformation Gradient ◽  
Shear Zones ◽  
Temperature Deformation ◽  
Timing Constraints ◽  
Important Variation ◽  
Deformation Phase ◽  
First Time

Detailed geological field mapping, integrated with meso- and microstructural investigations, kinematic of the flow and finite strain analyses, combined with geochronology, are fundamental tools to obtain information on the temperature–deformation–timing path of crystalline rocks and shear zone. The Posada-Asinara shear zone (PASZ) in northern Sardinia (Italy) is a steeply dipping km-thick transpressive shear zone. In the study area, located in the Baronie region (NE Sardinia), the presence of mylonites within the PASZ, affecting high- and medium-grade metamorphic rocks, provides an opportunity to quantify finite strain and kinematic vorticity. The main structures of the study area are controlled by a D2 deformation phase, linked to the PASZ activity, in which the strain is partitioned into folds and shear zone domains. Applying two independent vorticity methods, we detected an important variation in the percentage of pure shear and simple shear along the deformation gradient, that increases from south to north. We constrained, for the first time in this sector, the timing of the transpressive deformation by U–(Th)–Pb analysis on monazite. Results indicate that the shear zone has been active at ~325–300 Ma in a transpressive setting, in agreement with the ages of the other dextral transpressive shear zones in the southern Variscan belt.

Sign in / Sign up

Export Citation Format

Share Document