Internal structure of the Cadillac tectonic zone southeast of Val d'Or, Abitibi greenstone belt, Quebec

1989 ◽  
Vol 26 (12) ◽  
pp. 2661-2675 ◽  
Author(s):  
François Robert
Keyword(s):  
Internal Structure ◽  
Fault Zone ◽  
Greenstone Belt ◽  
Strain Increment ◽  
Tectonic Zone ◽  
Abitibi Greenstone Belt ◽  
Detailed Structural Analysis ◽  
Major Fault ◽  
Wide Zone ◽  
East West

The Kirkland Lake – Larder Lake – Cadillac Break is a major fault zone of the Abitibi greenstone belt, well known for its spatially associated gold camps. A detailed structural analysis of this fault zone in the Val d'Or area has shown the presence of a 200 – 750 m wide zone of high strain, defined here as the Cadillac tectonic zone (CTZ), which includes the narrower schist zone generally regarded as the Cadillac Break. The boundaries of the CTZ, which coincide with major lithologic contacts, strike approximately east–west and dip 80° to the north.The internal structure of the CTZ is best analysed in terms of two increments of the same progressive deformation. The D1 strain increment is characterized by an east–west-striking, subvertical S1 foliation, at low angle in strike to the bound aries of the CTZ and containing subvertical elongation lineation. Primary lithological contacts have been transposed into S1 and folded by F1a folds. F1b intrafolial folds of S1 ranging from noncylindrical, subhorizontal folds to subvertical sheath folds, indicate dip-slip movements within the CTZ. The D1 strain increment records synchronous dextral transcurrent shearing, as required by the obliquity of S1 to the CTZ boundaries, and subvertical elongation, as indicated by elongation lineations and F1b folds. The D2 strain increment is chiefly characterized by the development of moderately to steeply plunging asymmetric Z-shaped F2 folds with associated S2 cleavage, recording dextral transcurrent shearing.The studied segment of the CTZ is best interpreted as a zone of dextral transpression, evolving from a zone with a significant shortening component (D1) into a zone increasingly dominated by a transcurrent shearing component (D2).

Tectonic evolution of the northeast portion of the Archean Abitibi greenstone belt, Chibougamau area, Quebec

1990 ◽  
Vol 27 (12) ◽  
pp. 1714-1736 ◽  
Author(s):  
R. Daigneault ◽  
P. St-Julien ◽  
G. O. Allard
Keyword(s):  
Greenstone Belt ◽  
Local Stress ◽  
Shear Zones ◽  
Tectonic Zone ◽  
Abitibi Greenstone Belt ◽  
Vertical Extension ◽  
Regional Deformation ◽  
Deformation Phase ◽  
Deformation Event ◽  
East West

The Chibougamau area, occupying the northeastern part of the Abitibi greenstone belt is a large synclinorium of volcanic and sedimentary rocks enclosed within tonalitic gneisses. Several east–west–trending regional folds within this synclinorium are responsible for the vertical attitude of the strata. Synclinal structures, with youngest sediments within the core, possess axial-plane schistosity. Anticlines, on the other hand, either form domes with a core occupied by earlier tonalitic to dioritic plutons or are transected by a series of east–west-trending ductile faults (the Waconichi tectonic zone).An early deformation phase of low intensity (D1) generated broad, north–south folds without schistosity. The subsequent regional deformation, event D2, produced the large east–west folds. These deformations, in combination, produced the regional interference pattern of domes and basins. North–south horizontal shortening generated an east–west-trending schistosity associated with a vertical stretching lineation. Regional deformation at its climax produced a tightening of folds and rotation of fold axes parallel to the stretching lineation.Plutons deflected the regional east–west schistosity and formed concentric trajectories associated with "contact-strain aureoles." This produced small interaction zones or triple points characterized by strong vertical extension. These relations suggest an interference between a regional stress field, which produced north–south horizontal shortening, and local stress fields, controlled or deflected by granitoid plutons acting as competent bodies.East–west-trending ductile shear zones represent the final stage of the regional deformation. The observed northward and southward reverse movement along these east–west faults, their parallelism to the axial trace of folds, and the regional schistosity are probable evidence of a regime dominated by a coaxial strain.

scholarly journals Crustal velocity structure of the Superior and Grenville provinces of the southeastern Canadian Shield

1997 ◽  
Vol 34 (8) ◽  
pp. 1167-1184 ◽  
Author(s):  
S. Winardhi ◽  
R. F. Mereu
Keyword(s):  
Greenstone Belt ◽  
Velocity Structure ◽  
Canadian Shield ◽  
Crustal Thickening ◽  
Surface Velocity ◽  
Data Set ◽  
Tectonic Zone ◽  
Near Surface ◽  
Abitibi Greenstone Belt ◽  
Sudbury Structure

The 1992 Lithoprobe Abitibi–Grenville Seismic Refraction Experiment was conducted using four profiles across the Grenville and Superior provinces of the southeastern Canadian Shield. Delay-time analysis and tomographic inversion of the data set demonstrate significant lateral and vertical variations in crustal velocities from one terrane to another, with the largest velocity values occurring underneath the Central Gneiss and the Central Metasedimentary belts south of the Grenville Front. The Grenville Front Tectonic Zone is imaged as a southeast-dipping region of anomalous velocity gradients extending to the Moho. The velocity-anomaly maps suggest an Archean crust may extend, horizontally, 140 km beneath the northern Grenville Province. Near-surface velocity anomalies correlate well with the known geology. The most prominent of these is the Sudbury Structure, which is well mapped as a low-velocity basinal structure. The tomography images also suggest underthrusting of the Pontiac and Quetico subprovinces beneath the Abitibi Greenstone Belt. Wide-angle PmP signals, indicate that the Moho varies from a sharp discontinuity south of the Grenville Front to a rather diffuse and flat boundary under the Abitibi Greenstone Belt north of the Grenville Front. A significant crustal thinning near the Grenville Front may indicate post-Grenvillian rebound and (or) the extensional structure of the Ottawa–Bonnechere graben. Crustal thickening resulting from continental collision may explain the tomographic images showing the Moho is 4–5 km deeper south of the Grenville Front.

An Archean fold-thrust belt in the northwestern Abitibi Greenstone Belt: structural and seismic evidence

1995 ◽  
Vol 32 (2) ◽  
pp. 97-112 ◽  
Author(s):  
S. Lacroix ◽  
E. W. Sawyer
Keyword(s):  
Greenstone Belt ◽  
Structural Evolution ◽  
Thrust Belt ◽  
Abitibi Greenstone Belt ◽  
Structural Style ◽  
Slip Event ◽  
Reflector Geometry ◽  
Mountain Belts ◽  
East West ◽  
Seismic Reflector

An integration of structural field data and Lithoprobe seismic reflection line 28 in the northwestern Abitibi Greenstone Belt (AGB) reveals a crustal-scale, south-to southwest-vergent thrusting event that developed "in sequence" above a shallowly (15°) north-dipping sole thrust at a mid-crustal level. Seismic reflector geometry above this décollement suggests a mid crust (6–20 km depth) dominated by low-angle thrusts with smooth trajectory ramps and culmination folds or antiformal stacks, similar to the structural style of neighbouring high-grade plutonic–gneissic (Opatica) and sedimentary (Pontiac) subprovinces. In contrast, low-to high-angle east–west-trending thrusts at the upper-crust greenstone belt level (6–9 km depth) are interpreted to be listric. They occur in two fault systems, the Chicobi and Taibi, that resemble "imbricate fan" systems. The contrasting structural geometry of the upper and mid crust is interpreted as variations in level through the thrust stack, and resembles Paleozoic mountain belts where the upper AGB would represent a ductile–brittle fold–thrust belt. However, the structural evolution of the AGB has been complicated by earlier intrusive–metamorphic contacts or set of thrusts beneath it, and (or) younger out-of-sequence thrusts with north-vergent backthrusts. Also, south-to southwest-vergent thrusts were reactivated, folded, and steepened during a younger dextral strike-slip event.

Conditions and timing of metamorphism in the southern Abitibi greenstone belt, Quebec

1995 ◽  
Vol 32 (6) ◽  
pp. 787-805 ◽  
Author(s):  
W. G. Powell ◽  
D. M. Carmichael ◽  
C. J. Hodgson
Keyword(s):  
Greenstone Belt ◽  
Regional Metamorphism ◽  
Geothermal Gradient ◽  
Fault Zones ◽  
Low Grade ◽  
Metasedimentary Rocks ◽  
Abitibi Greenstone Belt ◽  
The North ◽  
Major Fault ◽  
Facies Transition

Regional metamorphism, ranging in grade from the subgreenschist-facies to the greenschist–amphibolite-facies transition, affects all Archean supracrustal rocks (>2677 Ma) in the Rouyn–Noranda area. Contact metamorphic minerals associated with the posttectonic Preissac–Lacorne batholith (2643 Ma) show no evidence of a regional retrograde event. Accordingly, the age of regional metamorphism can be bracketed between 2677 and 2643 Ma. Three reaction isograds were mapped in subgreenschist-facies metabasites, dividing the low-grade rocks into three metamorphic zones: the pumpellyite–actinolite zone, the prehnite–pumpellyite zone, and the prehnite–epidote zone. In addition, the pumpellyite–actinolite–epidote–quartz bathograd, corresponding to a pressure of approximately 200 MPa, occurs on both sides of the Porcupine–Destor fault. Low-pressure regional metamorphism is also indicated both by the occurrence of an actinolite–oligoclase zone, and the persistence of pre-regional-metamorphic andalusite. The coincidence of andalusite and the actinolite-oligoclase zone indicates that pressure was <330 MPa at the greenschist-amphibolite transition. The geothermal gradient during metamorphism was approximately 30 °C/km. Regionally, isograds dip shallowly to the north and trend subparallel to lithological and structural trends. Metamorphic minerals in metabasites define tectonic fabrics only near major fault zones and in zones of CO2 metasomatism. In biotite zone metasedimentary rocks the schistosity is defined by mica and amphibole. These textures indicate that metamorphism and fabric development were coeval. However, the actinolite–epidote isograd cuts the Porcupine–Destor fault, indicating that regional metamorphism postdates movement along this fault. The strong fabrics associated with the Porcupine–Destor and Larder Lake–Cadillac faults must have developed through a process dominated by flattening strain.

Hydrothermal Alteration Mineralogy and Geochemistry of the Archean World-Class Canadian Malartic Disseminated-Stockwork Gold Deposit, Southern Abitibi Greenstone Belt, Quebec, Canada

2019 ◽  
Vol 114 (6) ◽  
pp. 1057-1094 ◽  
Author(s):  
Stéphane De Souza ◽  
Benoît Dubé ◽  
Patrick Mercier-Langevin ◽  
Vicki McNicoll ◽  
Céline Dupuis ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Fault Zone ◽  
Hydrothermal Alteration ◽  
Greenstone Belt ◽  
Gold Mineralization ◽  
Amphibolite Facies ◽  
Alteration Zone ◽  
Gold Deposition ◽  
Abitibi Greenstone Belt ◽  
World Class

Abstract The Canadian Malartic stockwork-disseminated gold deposit is an Archean world-class deposit located in the southern Abitibi greenstone belt. It contains over 332.8 tonnes (t; 10.7 Moz) of Au at a grade of 0.97 ppm, in addition to 160 t (5.14 Moz) of past production (1935–1981). Although the deposit is partly situated within the Larder Lake-Cadillac fault zone, most of the ore occurs up to ~1.5 km to the south of the fault zone. The main hosts of the mineralized zones are greenschist facies turbiditic graywacke and mudstone of the Pontiac Group (~2685–2682 Ma) and predominantly subalkaline ~2678 Ma porphyritic quartz monzodiorite and granodiorite. These intrusions were emplaced during an episode of clastic sedimentation and alkaline to subalkaline magmatism known as the Timiskaming assemblage (<2680–2670 Ma in the southern Abitibi). The orebodies define two main mineralized trends, which are oriented subparallel to the NW-striking S2 cleavage and the E-striking, S-dipping Sladen fault zone. This syn- to post-D2 ductile-brittle to brittle Sladen fault zone is mineralized for more than 3 km along strike. The ore mainly consists of disseminated pyrite in stockworks and replacement zones, with subordinate auriferous quartz veins and breccia. Gold is associated with pyrite and traces of tellurides defining an Au-Te-W ± Ag-Bi-Mo-Pb signature. The orebodies are zoned outward, and most of the higher-grade (>1 ppm Au) ore was deposited as a result of iron sulfidation from silicates and oxides and Na-K metasomatism in carbonatized rocks. The alteration footprint comprises a proximal alteration envelope (K- or Na-feldspar-dolomite-calcite-pyrite ± phlogopite). This proximal alteration zone transitions to an outer shell of altered rocks (biotite-calcite-phengitic white mica), which hosts sub-ppm gold grades and reflects decreasing carbonatization, sulfidation, and aNa+/aH+ or aK+/aH+ of the ore fluid. Gold mineralization, with an inferred age of ~2664 Ma (Re-Os molybdenite), was contemporaneous with syn- to late-D2 peak metamorphism in the Pontiac Group; it postdates sedimentation of the Timiskaming assemblage along the Larder Lake-Cadillac fault zone (~2680–2669 Ma) and crystallization of the quartz monzodiorite. These chronological relationships agree with a model of CO2-rich auriferous fluid generation in amphibolite facies rocks of the Pontiac Group and gold deposition in syn- to late-D2 structures in the upper greenschist to amphibolite facies. The variable geometry, rheology, and composition of the various intrusive and sedimentary rocks have provided strain heterogeneities and chemical gradients for the formation of structural and chemical traps that host the gold. The Canadian Malartic deposit corresponds to a mesozonal stockwork-disseminated replacement-type deposit formed within an orogenic setting. The predominance of disseminated replacement ore over fault-fill and extensional quartz-carbonate vein systems suggests that the mineralized fracture networks remained relatively permeable and that fluids circulated at a near-constant hydraulic gradient during the main phase of auriferous hydrothermal alteration.

Pontiac metavolcanic rocks within the Cadillac tectonic zone, McWatters, Abitibi Belt, Quebec

1993 ◽  
Vol 30 (7) ◽  
pp. 1521-1531 ◽  
Author(s):  
David Morin ◽  
Michel Jébrak ◽  
Marc Bardoux ◽  
Normand Goulet
Keyword(s):  
Rare Earth ◽  
Trace Element ◽  
Rare Earth Element ◽  
Greenstone Belt ◽  
Earth Element ◽  
Calc Alkaline ◽  
Tectonic Zone ◽  
Southern Boundary ◽  
Abitibi Greenstone Belt ◽  
Metavolcanic Rocks

The McWatters metavolcanic rocks are structurally bounded lenses within the Cadillac tectonic zone on the southern boundary of the Abitibi greenstone belt. They comprise komatiite, tholeiitic basalt and gabbro, and calc-alkaline andesitic lavas and volcaniclastic rocks cut by calc-alkaline dioritic and lamprophyric dykes. The McWatters basalts are mid-ocean-ridge basalt type tholeiites exhibiting low incompatible trace element contents and [La/Yb]N < 1. They may have formed via relatively high degree partial melting of a rare-earth element depleted mantle source. The andesites exhibit chondrite-normalized trace-element patterns with light-rare-earth and large-ion lithophile element enrichments and negative Nb and Ti anomalies, comparable to those of subduction-related calc-alkaline andesites. McWatters units are distinct from nearby Blake River Group rocks, despite comparable lithological assemblages and some common geochemical characteristics. The McWatters basalts exhibit lower Ti/Y, Zr/Y, and La/Yb than the Blake River tholeiites, whereas the McWatters andesites display lower Ti/Zr and higher Zr/Y than the Blake River calc-alkaline units. The McWatters tholeiites can be correlated with northern Pontiac Group tholeiitic units based on similar trace-element ratios and parallel rare-earth-element patterns. Thus, the McWatters tholeiites represent Pontiac rocks, underthrust beneath the southern Abitibi belt and appearing as isolated and retrograded lenses in the Cadillac tectonic zone. They may represent the remnants of an ocean basin that once separated the southern Abitibi greenstone belt from the Pontiac Subprovince.

Timing and kinematics of post-Timiskaming deformation within the Larder Lake - Cadillac deformation zone, southwest Abitibi greenstone belt, Ontario, Canada

1999 ◽  
Vol 36 (4) ◽  
pp. 627-647 ◽  
Author(s):  
Lori Wilkinson ◽  
Alexander R Cruden ◽  
Thomas E Krogh
Keyword(s):  
Greenstone Belt ◽  
Deformation Zone ◽  
Greenschist Facies ◽  
Ductile Deformation ◽  
Magmatic Zircon ◽  
Lake Area ◽  
Abitibi Greenstone Belt ◽  
Terrane Accretion ◽  
East West ◽  
Greenschist Facies Metamorphism

The Larder Lake - Cadillac deformation zone is one of several anastomosing zones of high strain within the Abitibi greenstone belt. In the Kirkland Lake area, Ontario, the Larder Lake - Cadillac deformation zone is characterized by extensive carbonate and chlorite alteration, strong south-dipping foliations, and steep lineations. These features formed during two ductile deformation increments, D2 and D3, that occurred after deposition of Timiskaming assemblage sediments. D2 strain accumulation and greenschist facies metamorphism and alteration were localized within the deformation zone, facilitated by channelling of hydrothermal fluids within a preexisting structure, possibly formed during early D1 terrane accretion. During D2 north-south shortening, east-west-trending sectors of the deformation zone accumulated bulk coaxial strains, while southeast- and northeast-trending sectors experienced, respectively, dextral and sinistral transpressive deformations. Preservation of Timiskaming assemblage sediments in the footwall of the deformation zone indicates a component of south-over-north (reverse) displacement that is not recorded by D2 fabrics. Northwest-southeast D3 compression resulted in the formation of a regional, northeast-striking cleavage formed under regional greenschist facies conditions, and local dextral reactivation of suitably oriented sections of the Larder Lake - Cadillac deformation zone. The Murdoch Creek and Lebel stocks abut the Larder Lake - Cadillac deformation zone. Their internal structure and emplacement are interpreted to be a consequence of D2 north-south shortening. Magmatic zircon and titanite in the Murdoch Creek and Lebel stocks yield U-Pb geochronology ages of 2672 ± 2 and 2673 ± 2 Ma, providing a maximum age for D2 deformation. Hydrothermal titantite associated with S3 foliation in the Murdoch Creek stock gives an U-Pb age of 2665 ± 4 Ma, the maximum age of D3 deformation. Pluton emplacement, deformation, and coincident metamorphism occurred over a span of 1 Ma (from 2670 to 2669 Ma) to over 14 Ma (from 2675 to 2661 Ma), during a regime of north-south, followed by northwest-southeast, regional shortening.

Seismic reflection constraints from Lithoprobe line 29 on the upper crustal structure of the northern Abitibi greenstone belt

1995 ◽  
Vol 32 (2) ◽  
pp. 128-134 ◽  
Author(s):  
Gilles Bellefleur ◽  
Arthur Barnes ◽  
Andrew Calvert ◽  
Claude Hubert ◽  
Marianne Mareschal
Keyword(s):  
Crustal Structure ◽  
Greenstone Belt ◽  
Seismic Reflection ◽  
Volcanic Rocks ◽  
Seismic Profile ◽  
Median Filtering ◽  
Abitibi Greenstone Belt ◽  
Geological Information ◽  
Additional Constraints ◽  
East West

Detailed reprocessing of east–west Lithoprobe seismic reflection line 29 includes cross-dip analysis to improve the continuity of the reflectors and median filtering to attenuate shear wave refractions. The interpretation provides additional constraints on the tectonic models of northern Abitibi, but cannot be used to invalidate either of the two models recently presented for the area. However, the seismic profile defines a large east-dipping faulted contact between the Brouillan tonalite and the volcanic rocks exposed west of the intrusion. The moderate dip of the reflectors and their extensive lateral continuity, combined with geological information, provide evidence for an east-dipping thrust sequence and suggest an allochthonous origin for the Brouillan tonalite. The maximum thickness of the volcanic sequence in the northern Abitibi greenstone belt is 8 km, but could be as low as 4 km if Opatica orthogneisses are considered to underthrust northern Abitibi. The mid-crustal reflections confirm the east–west continuity of south-vergent imbrications also observed on a north–south reflection line (28) through northern and central Abitibi. Breakage and displacement of some mid-crustal reflectors may define a west-to-east thrust sequence of sense opposite to that which thrust the Brouillan pluton over the volcanic rocks.

Sign in / Sign up

Export Citation Format

Share Document