Crustal structure beneath the southern Grand Banks: seismic-refraction results and their implications

1988 ◽  
Vol 25 (5) ◽  
pp. 760-772 ◽  
Author(s):  
I. Reid
Keyword(s):  
Velocity Structure ◽  
Seismic Velocity ◽  
Seismic Refraction ◽  
Ocean Bottom ◽  
Crustal Layer ◽  
Ocean Bottom Seismograph ◽  
Grand Banks ◽  
Reflection Data ◽  
Air Gun ◽  
Lower Crustal

A seismic-refraction profile was shot on the southern Grand Banks using large air-gun sources and an array of ocean-bottom seismograph receivers. A sediment column 1–2 km thick directly overlies Paleozoic basement with velocity structure similar to that of the Meguma Zone of Nova Scotia. The main crustal layer is 27 km thick, with seismic velocity of 6.3 km/s increasing to about 6.5 km/s in the lowest few kilometres. Complexity is apparent in the crust–mantle transition around 32 km depth. Comparison with deep multichannel reflection data suggests that the increased velocity in the lower part of the crust may be associated with a reflective zone and shows the Mohorovičić discontinuity to be delineated by a well-defined reflection. The absence of a major lower crustal layer of intermediate velocity (> 7 km/s) is consistent with observations elsewhere in the region.

Crustal structure of the Nova Scotian margin in the Laurentian Channel region

1987 ◽  
Vol 24 (9) ◽  
pp. 1859-1868 ◽  
Author(s):  
I. Reid
Keyword(s):  
Crustal Structure ◽  
Seismic Velocity ◽  
Structural Information ◽  
Seismic Refraction ◽  
Ocean Bottom ◽  
Eastern Canada ◽  
Crustal Layer ◽  
Air Gun ◽  
Lower Crustal

A seismic-refraction study on the outer Scotian Shelf of eastern Canada, carried out using large air-gun sources and ocean bottom seismograph receivers, has provided structural information on the entire crustal column. A thick (about 13 km) sedimentary sequence is characterized by significant lateral variation in this area, and a marked increase in seismic velocity around 8 km depth may delineate the synrift–postrift transition. Beneath the sediments is highly attenuated continental crust, about 11 km thick, with some evidence for a lower crustal layer of velocity around 7 km/s, which may be partly due to under-plating during rifting. Determination of the complete crustal structure, including the tentative delineation of the rift–drift transition, in a region of large crustal extension provides a useful test for models of continental rifting, and a simple uniform extension–subsidence model is found to produce an adequate fit to the interpreted structure.

The structure of Archean–Ketilidian crust along the continental shelf of southwestern Greenland from a seismic refraction profile

1992 ◽  
Vol 29 (2) ◽  
pp. 301-313 ◽  
Author(s):  
Deping Chian ◽  
Keith Louden
Keyword(s):  
Lower Crust ◽  
Velocity Structure ◽  
Seismic Refraction ◽  
Mobile Belt ◽  
Ocean Bottom ◽  
Upper Crust ◽  
S Wave ◽  
Seismic Line ◽  
Wave Velocities ◽  
Air Gun

The velocity structure of the continental crust on the outer shelf of southwestern Greenland is determined from dense wide-angle reflection–refraction data obtained with large air-gun sources and ocean bottom seismometers along a 230 km seismic line. This line crosses the geological boundary between the Archean block and the Ketilidian mobile belt. Although the data have high noise levels, P- and S-wave arrivals from within the upper, intermediate, and lower crust, and at the Moho boundary, can be consistently identified and correlated with one-dimensional WKBJ synthetic seismograms. In the Archean, P- and S-wave velocities in the upper crust are 6.0 and 3.4 km/s, while in the intermediate crust they are 6.4 and 3.6 km/s. These velocities match for the upper crust a quartz–feldspar gneiss composition and for the intermediate crust an amphibolitized pyroxene granulite. In the Ketilidian mobile belt, P- and S-wave velocities are 5.6 and 3.3 km/s for the upper crust and 6.3 and 3.6 km/s for the intermediate crust. These velocities may represent quartz granite in the upper crust and granite and granitic gneiss in the intermediate crust. The upper crust is ~5 km thick in the Archean block and the Ketilidian mobile belt, and thickens to ~9 km in the southern part of the Archean. This velocity structure supports a Precambrian collisional mechanism between the Archean block and Ketilidian mobile belt. The lower crust has a small vertical velocity gradient from 6.6 km/s at 15 km depth to 6.9 km/s at 30 km depth (Moho) along the refraction line, with a nearly constant S-wave velocity around 3.8 km/s. These velocities likely represent a gabbroic and hornblende granulite composition for the lower crust. This typical (but somewhat thin) Precambrian crustal velocity structure in southwestern Greenland shows no evidence for a high-velocity, lower crustal, underplated layer caused by the Mesozoic opening of the Labrador Sea.

Crustal structure across the Nain – Makkovik boundary on the continental shelf off Labrador from seismic refraction data

1996 ◽  
Vol 33 (3) ◽  
pp. 460-471 ◽  
Author(s):  
Ian Reid
Keyword(s):  
Continental Shelf ◽  
Wave Velocity ◽  
Crustal Structure ◽  
Lower Crust ◽  
Velocity Structure ◽  
Seismic Velocity ◽  
Seismic Refraction ◽  
P Wave ◽  
Air Gun ◽  
P Wave Velocity

A detailed seismic refraction profile was shot along the continental shelf off Labrador, across the boundary between the Archean Nain Province to the north and the Proterozoic Makkovik orogenic zone to the south. A large air-gun source was used, with five ocean-bottom seismometers as receivers. The data were analysed by forward modelling of traveltimes and amplitudes and provided a well-determined seismic velocity structure of the crust along the profile. Within the Nain province, thin postrift sediments are underlain by crust with a P-wave velocity of 6.1 km/s, which increases with depth and reaches 6.6 km/s at about 8 km. Moho is at around 28 km, and there is no evidence for a high-velocity (>7 km/s) lower crust. The P- and S-wave velocity structure is consistent with a gneissic composition for the Archean upper crust, and with granulites becoming gradually more mafic with depth for the intermediate and lower crust. In the Makkovik zone, the sediments are thicker, and a basement layer of P-wave velocity 5.5–5.7 km/s is present, probably due to reworking of the crust and the presence of Early Proterozoic volcanics and metasediments. Upper crustal velocities are lower than in the Nain Province. The crustal thickness, at 23 km, is less, possibly due in part to greater crustal stretching during the Mesozoic rifting of the Labrador Sea. The crustal structure across the Nain–Makkovik boundary is similar to that across the corresponding Archean–Ketilidian boundary off southwest Greenland.

The continent–ocean boundary south of Flemish Cap: constraints from seismic refraction and gravity

1989 ◽  
Vol 26 (7) ◽  
pp. 1392-1407 ◽  
Author(s):  
B. J. Todd ◽  
I. Reid
Keyword(s):  
Oceanic Crust ◽  
Structural Information ◽  
Seismic Refraction ◽  
P Wave ◽  
Ocean Bottom ◽  
Crustal Layer ◽  
Air Gun ◽  
Ocean Bottom Seismometers ◽  
Plate Reconstructions ◽  
Ocean Boundary

A seismic-refraction survey providing deep crustal structural information on the continent–ocean boundary south of Flemish Cap on the east coast of Canada was carried out using large air-gun sources and ocean-bottom seismometers. The seismic-refraction results and gravity modelling suggest that thinned continental crust extends 25 km seaward of the shelf break. The transition from continental to oceanic crust with a main crustal layer p-wave velocity of 7.3 km/s extends seaward over 100 km to the south. One refraction profile with thin (~4 km) oceanic crust was probably shot on, or very near, the trace of a fracture zone. Previous plate reconstructions have suggested that Cretaceous-age sea-floor spreading south of Flemish Cap occurred as a series of short spreading segments offset by transform fauits, or by asymmetric rifting between Iberia and Flemish Cap. This study suggests that an oblique shear margin may have formed south of Flemish Cap. possibly as a result of transcurrent motion between Flemish Cap and Iberia.

Crustal structures of Grenville, Makkovik, and southern Nain provinces along the Lithoprobe ECSOOT Transect: regional seismic refraction and gravity models and their tectonic implications

1998 ◽  
Vol 35 (5) ◽  
pp. 583-601 ◽  
Author(s):  
Keith E Louden ◽  
Jianming Fan
Keyword(s):  
Lower Crust ◽  
Velocity Structure ◽  
Gravity Data ◽  
Seismic Refraction ◽  
Gravity Models ◽  
Grenville Province ◽  
Crustal Layer ◽  
The North ◽  
Crustal Structures ◽  
Lower Crustal

Crustal structures of the eastern Grenville, Makkovik, and southern Nain provinces are determined using seismic reflection-refraction and gravity data along the Lithoprobe Eastern Canadian Shield Onshore-Offshore Transect (ECSOOT). Within the Grenville Province, the velocity model contains a 5 km thick upper crust and a variable-thickness middle to lower crust. The total crustal thickness varies from 25 to 43 km, with the thickest crust in the south and thinnest crust in the north. A high-velocity, lower crustal wedge is coincident with a strong band of northward-dipping reflectors. The two-dimensional velocity structure is compatible with modelling of a 60 mGal gravity high over the Hawke River terrane. In the Makkovik Province, the thickness of upper crustal velocities increases to 17 km. The velocity decrease in the upper to middle crust from the Grenville Province to the Makkovik Province is similar to that of refraction models across the Grenville Front in Ontario and Quebec. It is possibly related to a decrease in metamorphic grade from south to north and (or) a larger volume of unmetamorphosed plutons in the Makkovik Province. A lower crustal layer is coincident with a region of increased reflectivity in the lower crust. There are no major crustal discontinuities associated with terrane boundaries within the Makkovik Province. The base of the crust is consistent with a change from north- to south-dipping reflectors beneath the Cape Harrison domain. Alternatively, it may consist of a thick zone of complex velocity variations, consistent with a zone of diffusive reflectivity observed to the north of the Allik domain.

Crustal Structure across Central Scandinavian Peninsula along Silver Road refraction profile

2021 ◽  
Author(s):  
Metin Kahraman ◽  
Hans Thybo ◽  
Irina Artemieva ◽  
Alexey Shulgin ◽  
Alireza Malehmir ◽  
...  
Keyword(s):  
Atlantic Ocean ◽  
North Atlantic ◽  
Baltic Shield ◽  
Velocity Structure ◽  
Seismic Velocity ◽  
Seismic Profile ◽  
High Mountain ◽  
Mountain Range ◽  
Air Gun ◽  
The Baltic

<p>The Baltic Shield is located in the northern part of Europe, which formed by amalgamation of a series of terranes and microcontinents during the Archean to the Paleoproterozoic, followed by significant modification in Neoproterozoic to Paleozoic time. The Baltic Shield includes an up-to 2500 m high mountain range, the Scandes , along the western North Atlantic coast, despite being a stable craton located far from any active plate boundary.</p><p>We study a crustal scale seismic profile experiment in northern Scandinavia between 63<sup>o</sup>N and 71<sup>o</sup>N. Our Silverroad seismic profile extends perpendicular to the coastline around Lofoten and extends ~300km in a northwest direction across the shelf into the Atlantic Ocean and ~300km in a southeastern direction across the Baltic Shield. The seismic data were acquired with 5 explosive sources and 270 receivers onshore; 16 ocean bottom seismometers and air gun shooting from the vessel Hakon Mosby were used to collect both offshore and onshore.</p><p>We present the results from raytracing modelling of the seismic velocity structure along the profile. The outputs of this experiment will help to solve high onshore topography and anomalous and heterogeneous bathymetry of the continental lithosphere around the North Atlantic Ocean. The results show crustal thinning from the shield onto the continental shelf and further into the oceanic part. Of particular interest is the velocity below the high topography of the Scandes, which will be discussed in relation to isostatic equilibrium along the profile.</p>

scholarly journals Travel Time Tomography to Delineate 3-D Regional Seismic Velocity Structure in the Banyumas Basin, Central Java, Indonesia, Using Dense Borehole Seismographic Stations

2021 ◽  
Vol 9 ◽  
Author(s):  
Hidayat Hidayat ◽  
Andri Dian Nugraha ◽  
Awali Priyono ◽  
Marjiyono Marjiyono ◽  
Januar H. Setiawan ◽  
...  
Keyword(s):  
Velocity Structure ◽  
Seismic Velocity ◽  
Velocity Model ◽  
Crustal Layer ◽  
Central Java ◽  
Resolution Element ◽  
Passive Seismic ◽  
Dextral Strike Slip Fault ◽  
Southern Central ◽  
Well Data

The Banyumas Basin is a tertiary sedimentary basin located in southern Central Java, Indonesia. Due to the presence of volcanic deposits, 2-D seismic reflection methods cannot provide a good estimation of the sediment thickness and the subsurface geology structure in this area. In this study, the passive seismic tomography (PST) method was applied to image the 3-D subsurface Vp, Vs, and Vp/Vs ratio. We used 70 seismograph borehole stations with a recording duration of 177 days. A total of 354 events with 9, 370 P and 9, 368 S phases were used as input for tomographic inversion. The checkshot data of a 4, 400-meter deep exploration well (Jati-1) located within the seismic network were used to constrain the shallow crustal layer of the initial 1-D velocity model. The model resolution of the tomographic inversions was assessed using the checkerboard resolution test (CRT), the diagonal resolution element (DRE), and the derivative weight sum (DWS). Using the obtained Vp, Vs, and Vp/Vs ratio, we were able to sharpen details of the geological structures within the basin from previous geological studies, and a fault could be well-imaged at a depth of 4 km. We interpreted this as the main dextral strike-slip fault that controls the pull apart process of the Banyumas Basin. The thickness of the sediment layers, as well as its layering, were also could be well determined. We found prominent features of the velocity contrast that aligned very well with the boundary between the Halang and Rambatan formations as observed in the Jati-1 well data. Furthermore, an anticline structure, which is a potential structural trap for the petroleum system in the Banyumas Basin, was also well imaged. This was made possible due to the dense borehole seismographic stations which were deployed in the study area.

Crustal velocity structure from SAREX, the Southern Alberta Refraction Experiment

2002 ◽  
Vol 39 (3) ◽  
pp. 351-373 ◽  
Author(s):  
Ron M Clowes ◽  
Michael JA Burianyk ◽  
Andrew R Gorman ◽  
Ernest R Kanasewich
Keyword(s):  
Velocity Structure ◽  
Data Interpretation ◽  
Crustal Thickening ◽  
Tectonic Zone ◽  
Crustal Layer ◽  
Crustal Velocity ◽  
Crustal Velocity Structure ◽  
Southern Alberta ◽  
Magmatic Underplating ◽  
Lower Crustal

Lithoprobe's Southern Alberta Refraction Experiment, SAREX, extends 800 km from east-central Alberta to central Montana. It was designed to investigate crustal velocity structure of the Archean domains underlying the Western Canada Sedimentary Basin. From north to south, SAREX crosses the Loverna domain of the Hearne Province, the Vulcan structure, the Medicine Hat block (previously considered part of the Hearne Province), the Great Falls tectonic zone, and the northern Wyoming Province. Ten shot points along the profile in Canada were recorded on 521 seismographs deployed at 1 km intervals. To extend the line, an additional 140 seismographs were deployed at intervals of 1.25–2.50 km in Montana. Data interpretation used an iterative application of damped least-squares inversion of traveltime picks and forward modeling. Results show different velocity structures for the major blocks (Loverna, Medicine Hat, and Wyoming), indicating that each is distinct. Wavy undulations in the velocity structure of the Loverna block may be associated with internal crustal deformation. The most prominent feature of the model is a thick (10–25 km) lower crustal layer with high velocities (7.5–7.9 km/s) underlying the Medicine Hat and Wyoming blocks. Based on data from lower crustal xenoliths in the region, this layer is interpreted to be the result of Paleoproterozoic magmatic underplating. Crustal thickness varies from 40 km in the north to almost 60 km in the south, where the high-velocity layer is thickest. Uppermost mantle velocities range from 8.05 to 8.2 km/s, with the higher values below the thicker crust. Results from SAREX and other recent studies are synthesized to develop a schematic representation of Archean to Paleoproterozoic tectonic development for the region encompassing the profile. Tectonic processes associated with this development include collisions of continental blocks, subduction, crustal thickening, and magmatic underplating.

Sign in / Sign up

Export Citation Format

Share Document