Sediments of ice-dammed, self-draining Ape Lake, British Columbia

1987 ◽  
Vol 24 (9) ◽  
pp. 1735-1747 ◽  
Author(s):  
Robert Gilbert ◽  
Joseph R. Desloges

The glacier damming Ape Lake has withdrawn from its Neoglacial terminal moraines in the lake since early in this century at an average rate of 15 m/a. As a result, the first known drainings of Ape Lake occurred in October 1984 and August 1986. In each event, about 54% of the volume of the lake was lost through a tunnel in the damming glacier. Most of the remaining water was held in the deep basin of the lake behind partially breached Neoglacial terminal moraines. As the glaciers have withdrawn, the character of the sediments has changed. Sediments in the deep basin of the lake are varved, but the grain size, especially of the summer deposits, has decreased and rates of sedimentation have decreased from about 4 mm/a to less than 2 mm/a. In shallow water, deposition of varved sediments has given way to the deposition of massive sediments at rates of less than 1 mm/a. Ice-rafted debris is rare in deep water, despite the presence of calving bergs.During and following the first draining, significant subaerial erosion occurred as a result of the event itself, the drawdown and steepened gradients, and the action of waves on the exposed sediments as the lake refilled. In proximal areas, distinct deposits within the normal winter deposits are recognised. In deep water, deposition of massive, highly underconsolidated, fine-grained sediments occurred. Organic debris released from shallow deposits by erosion has become concentrated in both shallow- and deep-water sediments. Within a year of the first draining, sediment loads in the lake water were returning to normal.

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 653
Author(s):  
Shereef Bankole ◽  
Dorrik Stow ◽  
Zeinab Smillie ◽  
Jim Buckman ◽  
Helen Lever

Distinguishing among deep-water sedimentary facies has been a difficult task. This is possibly due to the process continuum in deep water, in which sediments occur in complex associations. The lack of definite sedimentological features among the different facies between hemipelagites and contourites presented a great challenge. In this study, we present detailed mudrock characteristics of the three main deep-water facies based on sedimentological characteristics, laser diffraction granulometry, high-resolution, large area scanning electron microscopy (SEM), and the synchrotron X-ray diffraction technique. Our results show that the deep-water microstructure is mainly process controlled, and that the controlling factor on their grain size is much more complex than previously envisaged. Retarding current velocity, as well as the lower carrying capacity of the current, has an impact on the mean size and sorting for the contourite and turbidite facies, whereas hemipelagite grain size is impacted by the natural heterogeneity of the system caused by bioturbation. Based on the microfabric analysis, there is a disparate pattern observed among the sedimentary facies; turbidites are generally bedding parallel due to strong currents resulting in shear flow, contourites are random to semi-random as they are impacted by a weak current, while hemipelagites are random to oblique since they are impacted by bioturbation.


1976 ◽  
Vol 33 (3) ◽  
pp. 385-403 ◽  
Author(s):  
R. L. Thomas ◽  
J.-M. Jaquet ◽  
A. L. W. Kemp ◽  
C. F. M. Lewis

On the basis of extensive echosounding and grab sampling, three major units have been recognized in Lake Erie: till and bedrock, glaciolacustrine clay, and postglacial muds. These units represent the late glacial and postglacial evolution of the basin and occur in an offshore younging sequence. The main basin of the lake is subdivided by residual glacial moraines into four depositional basins: Western, Sandusky, Central, and Eastern basins. The sediment texture has been defined by moment measures (mean, standard deviation, skewness, and kurtosis), the trends of which are related to the mixing of two primary grain-size populations in the sand- and clay-size ranges. A third grain-size mode in the silt size, composed of fine quartz with some carbonate, has been recognized. This mode has a modifying effect on the symmetry of the two primary populations and may, to some extent, be sufficiently abundant to behave as a discrete population. The trends in the textural characteristics, particularly skewness and kurtosis, have been utilized to define energy regimes at the sediment–water interface which indicates three distinct sedimentary or hydraulic regions: 1) Western basin region — Fine-grained sediment accretion in shallow water related to an imbalance in sediment budget, with high input loadings of fine-grained sediment, and deficit in coarse materials, with an excess of input over sediment export to the Central basin region. This results in net sediment accretion in shallow water with texture in disequilibrium with environmental energy, which produces mixing and suspension, followed by redeposition; 2) Central basin region — West to East coarsening of sediment in textural equilibrium with hydraulic energy, as it relates to increasing fetch under westerly and southwesterly prevailing winds; 3) Eastern basin region — Deepwater basin with sediments showing decreasing size offshore with increasing water depth. The deepwater sediment is modified by the influx of substantial quantities of the silt-size material derived from shoreline erosion in the north shore of the Central basin region.The interrelationships of parameters indicate textural dependence on mineralogic composition, particularly important being the relationship of clay concentration to mean grain size. This has particular value in modelling the physical behavior of clay-associated geochemical elements such as phosphorus.


Author(s):  
S. E. Calvert

SynopsisThe sediments of shallow and deep water areas of Loch Leven are, respectively, medium to very fine-grained sands and silty clays (muds). The largest area of more or less uniform sediment type (sands) occurs on the north-eastern shelf. The sediments with the finest grain size are found in an area to the south and east of Castle Island and Reed Bower. Here, the median grain size is less than 4 microns. The amount of sand in a sediment is very highly correlated with the median grain size of the sediment and may therefore most usefully be used to describe the general distribution of sediments in the loch. The distribution of organic carbon in the loch sediments is largely confined to deep-water areas. The southern deep area is more organic rich than the northern deep area. The amount of organic carbon in a sediment is positively correlated with the amounts of clay and silt in the sediment.


1975 ◽  
Vol 12 (8) ◽  
pp. 1346-1361 ◽  
Author(s):  
Roger M. Slatt

Surficial palimpsest sediments in Halls Bay, north-central Newfoundland, are mixtures of gravel, sand, and mud deposited from a number of sources in varying quantities from late Wisconsinan to the present time. Shallow water gravel originated as till and glacio-fluvial outwash. Gravel in deep water probably is ice-rafted. Sand and mud, which occurs with shallow water gravel and in deeper water, is a combination of fluvial material and material winnowed out of till and outwash by shallow water waves and currents during early marine transgression. There also may be a contribution of fine-grained sediment from the adjacent shelf.Gravel (coarser than [Formula: see text]), very fine sand (3 to [Formula: see text]) and coarse silt (4 to [Formula: see text]) modal grain-size classes predominate in the sediments. The very fine sand mode occurs on the west side of the inlet and the coarse silt mode occurs on the east side regardless of water depth, indicating net or active easterly dispersal of fine-grained sediment. This dispersal path may result from the presence in Halls Bay of a counterclockwise gyre of the Labrador Current that has developed since early transgression, which suggests the sediment surface is adjusting to the Halls Bay modern hydraulic regime.Sandy and muddy sediments are composed of quartz, feldspar, amphibole, illite, chlorite, montmorillonite, organic matter, CaCO3, and FeS. Major, minor, and trace element concentrations vary with grain-size, owing to the different proportions of these components in different size fractions. Calculation of an average chemical composition of sediments is biased because of this grain-size effect. The grain-size effect on chemistry of a suite of sediments can be accounted for by ratioing element concentrations to clay content.Plots of the ratio trace metal concentration/clay content vs. clay content for six trace metals indicate anomalous Cu concentrations occur in surface sediments along the east side of Halls Bay in the direction of fine-grained sediment dispersal. The anomalous Cu is derived from onshore mineralization in Lushs Bight Group volcanic rocks, which Occur along the west side of the inlet.The results provide an example of the applicability of marine sedimentologic/sedimentary geochemical investigations to mineral exploration. Local geochemical anomalies in sediments can be detected by routine analysis of total metal content of bulk samples provided the grain-size effect on chemistry is accounted for. The anomalous metal can be traced to its onshore source by evaluating sediment dispersal paths from textural variations.


1971 ◽  
Vol 8 (11) ◽  
pp. 1432-1454 ◽  
Author(s):  
Erich Dimroth

The sequence of the Labrador geosyncline is subdivided in three cycles, each beginning with deposition of shallow-water quartzites and precipitates and culminating with the deposition of thick shale–graywacke–basalt suites. This paper describes the stratigraphy and sedimentology of the formations deposited during the gradual re-stabilization of the basin at the end of cycle I.At the end of cycle I, red, green, and gray pro-deltaic shales and sandstones prograded into the basin from the west. They interfinger eastwards and upwards with the Dertaull Dolomite. In the west laminated dolomite was deposited on a deltaic platform; brecciated and conglomeratic dolomites developed at the slope margin, and grade into alternating laminated dolomite, conglomeratic dolomite, and pelite in the basin. Slumping and turbidity currents were important transport mechanisms. Lenses of massive dolomite deposited in relatively deep water occur in the center of the trough and a platform extended in the eastern, eugeosyclinal zone. Upper horizons of the Denault Dolomite grade into the Attikamagen IV basinwards. The basal member of the Attikamagen IV consists of relatively deep-water shales; these grade upwards into red silstone and fine-grained sandstones of deltaic or pro-deltaic origin. The Fleming Breccia overlies the Denault Dolomite at the western margin of the trough. This unit is probably derived from a bedded sequence of siltstone, sandstone, and dolomite, that has been profoundly altered by complete replacement of dolomite by chert, followed by pene-contemporaneous brecciation and slumping. The Wishart Formation overlaps all older units with a marginal unconformity, but has gradational contacts with the latest deposits of Cycle I (uppermost Attikamagen IV and perhaps Fleming) closer to the basin center.


Author(s):  
Jon R. Ineson ◽  
John S. Peel

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Ineson, J. R., & Peel, J. S. (1997). Cambrian shelf stratigraphy of North Greenland. Geology of Greenland Survey Bulletin, 173, 1-120. https://doi.org/10.34194/ggub.v173.5024 _______________ The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.


2021 ◽  
Vol 83 (4) ◽  
Author(s):  
S. Adam Soule ◽  
Michael Zoeller ◽  
Carolyn Parcheta

AbstractHawaiian and other ocean island lava flows that reach the coastline can deposit significant volumes of lava in submarine deltas. The catastrophic collapse of these deltas represents one of the most significant, but least predictable, volcanic hazards at ocean islands. The volume of lava deposited below sea level in delta-forming eruptions and the mechanisms of delta construction and destruction are rarely documented. Here, we report on bathymetric surveys and ROV observations following the Kīlauea 2018 eruption that, along with a comparison to the deltas formed at Pu‘u ‘Ō‘ō over the past decade, provide new insight into delta formation. Bathymetric differencing reveals that the 2018 deltas contain more than half of the total volume of lava erupted. In addition, we find that the 2018 deltas are comprised largely of coarse-grained volcanic breccias and intact lava flows, which contrast with those at Pu‘u ‘Ō‘ō that contain a large fraction of fine-grained hyaloclastite. We attribute this difference to less efficient fragmentation of the 2018 ‘a‘ā flows leading to fragmentation by collapse rather than hydrovolcanic explosion. We suggest a mechanistic model where the characteristic grain size influences the form and stability of the delta with fine grain size deltas (Pu‘u ‘Ō‘ō) experiencing larger landslides with greater run-out supported by increased pore pressure and with coarse grain size deltas (Kīlauea 2018) experiencing smaller landslides that quickly stop as the pore pressure rapidly dissipates. This difference, if validated for other lava deltas, would provide a means to assess potential delta stability in future eruptions.


1987 ◽  
Vol 33 (115) ◽  
pp. 274-280 ◽  
Author(s):  
David M. Cole

AbstractThis paper presents and discusses the results of constant deformation-rate tests on laboratory-prepared polycrystalline ice. Strain-rates ranged from 10−7to 10−1s−1, grain–size ranged from 1.5 to 5.8 mm, and the test temperature was −5°C.At strain-rates between 10−7and 10−3s−1, the stress-strain-rate relationship followed a power law with an exponent ofn= 4.3 calculated without regard to grain-size. However, a reversal in the grain-size effect was observed: below a transition point near 4 × 10−6s−1the peak stress increased with increasing grain-size, while above the transition point the peak stress decreased with increasing grain-size. This latter trend persisted to the highest strain-rates observed. At strain-rates above 10−3s−1the peak stress became independent of strain-rate.The unusual trends exhibited at the lower strain-rates are attributed to the influence of the grain-size on the balance of the operative deformation mechanisms. Dynamic recrystallization appears to intervene in the case of the finer-grained material and serves to lower the peak stress. At comparable strain-rates, however, the large-grained material still experiences internal micro-fracturing, and thin sections reveal extensive deformation in the grain-boundary regions that is quite unlike the appearance of the strain-induced boundary migration characteristic of the fine-grained material.


2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
B. M. Praveen ◽  
T. V. Venkatesha

Zn-Fe alloy electrodeposition was carried out in the presence of condensation product 2-{[(1E)-(3,4-dimethoxyphenyl)methylidene]amino}-3-hydroxypropanoic acid formed between veratraldehyde and serine in acid sulphate bath. Hull cell was used for optimizing the operating parameters and bath constituents. During deposition, the potential was shifted towards cathodic direction in the presence of addition agents and brightener. The polarization studies show that deposition taking place in basic bath and optimum bath was 1.08 and 1.15 V, respectively. Current efficiency and throwing power were reached around 85% and 26%, respectively. The SEM images of bright deposit indicated its fine-grained nature and appreciable reduction in the grain size. XRD studies have showed that the grain size of the deposit generated from optimum bath was 16 nm. UV-visible spectroscopic studies confirm the formation of complex between metal ion and brightener.


Author(s):  
Elton J. B. Ribeiro ◽  
Zhimin Tan ◽  
Yucheng Hou ◽  
Yanqiu Zhang ◽  
Andre Iwane

Currently the oil and gas industry is focusing on challenging deep water projects, particularly in Campos Basin located coast off Brazil. However, there are a lot of prolific reservoirs located in shallow water, which need to be developed and they are located in area very far from the coast, where there aren’t pipelines facilities to export oil production, in this case is necessary to use a floating production unit able to storage produced oil, such as a FPSO. So, the riser system configuration should be able to absorb FPSO’s dynamic response due to wave load and avoid damage at touch down zone, in this case is recommended to use compliant riser configuration, such as Lazy Wave, Tethered Wave or Lazy S. In addition to, the proposed FPSO for Tubarão Martelo development is a type VLCC (Very Large Crude Carrier) using external turret moored system, which cause large vertical motion at riser connection and it presents large static offset. Also are expected to install 26 risers and umbilicals hanging off on the turret, this large number of risers and umbilicals has driven the main concerns to clashing and clearance requirement since Lazy-S configuration was adopted. In this paper, some numerical model details and recommendations will be presented, which became a feasible challenging risers system in shallow water. For instance, to solve clashing problem it is strictly recommended for modeling MWA (Mid Water Arch) gutter and bend stiffener at top I-tube interface, this recommendation doesn’t matter in deep water, but for shallow water problem is very important. Also is important to use ballast modules in order to solve clashing problems.


Sign in / Sign up

Export Citation Format

Share Document