Seismic-profiler investigation of the continental margin northeast of Newfoundland

1968 ◽  
Vol 5 (5) ◽  
pp. 1187-1198 ◽  
Author(s):  
A. C. Grant

Continuous seismic profiler recordings over the continental shelf northeast of Newfoundland show an accumulation of unconsolidated sediments ranging in thickness from 30 to 150 m, unconformably over-lying bedrock that dips gently eastward toward the continental slope. The distribution of these unconsolidated sediments indicates that the banks that compose the 'shelf-edge rise' are not primarily morainal material, but rather they are areas of positive relief on the bedrock surface. Anomalous strike-dip relationships associated with these bank areas suggest that they may also have structural significance. The underlying bedrock layers are truncated by the continental slope, and there is reversal in the dip of these layers from eastward to westward beneath the slope. The axial zone of the resulting fold apparently coincides very nearly with the axis of a large magnetic anomaly that extends along the continental margin in this region. A Tertiary to post-Tertiary age is suggested for the fold, as well as the structural disturbance associated with the topographic relief on the continental shelf. Within the continental rise an area of irregular bottom topography is considered to be due to the accumulation of large masses of sediment by slumping. Subbottom reflectors at depths beyond the continental rise show crumpling, which is assumed to be further evidence of mass-movement due to gravity. Superficially, the continental margin northeast of Newfoundland appears similar to parts of the continental margin to the south, on the flank of the Appalachian structural complex.

2018 ◽  
Vol 3 (4) ◽  
pp. 253-264 ◽  
Author(s):  
Leticia Burone ◽  
Paula Franco-Fraguas ◽  
Michel Mahiques ◽  
Leonardo Ortega

The Uruguayan Continental Margin is located in a strategic location of great relevance to understand the dynamics of the regional and global climate and to study the sedimentary processes. The Río de la Plata represents the largest fluvial discharge of the Southwest Atlantic (23.000 m3/s of water and 57.000.000 m3/year of sediment for the South Atlantic Ocean). The sub-surface and deep circulation are characterized by the confluence of water masses with contrasting thermohaline characteristics that determine the formation of well-marked hydrological fronts. In the continental shelf, this characteristic is represented by the Subtropical Shelf Front, as a shallow extension of the Brazil-Malvinas Confluence that occurs in deep water off the shelf. Although the knowledge of the regional circulation is acceptable, there are significant gaps in the knowledge related to the influence of this complex hydrological system on sedimentation processes. The objective of this work is to synthesize the present knowledge about the morpho-sedimentary characteristics of the Uruguayan Continental Margin and the processes involved in its formation. It also aims to discuss some knowledge gaps that are the subject of current research in the region. The knowledge reflects the scientific-technological evolution at a global level that is translated in the increase of recent works on the continental slope. Nowadays, most of the available information is associated with the inner shelf and upper slope. Starting from the basis of the close relationship between bathymetry and sedimentological distribution it is clear that efforts should be concentrated on the better understanding of the interaction between the shelf and the slope. The scientific knowledge regarding sedimentology and geochemistry along the Uruguayan Continental Margin is still, scarce and heterogeneous. However, it indicates complexity in the sedimentary coverture present both in the continental shelf and slope. The Uruguayan Continental Margin can be considered as an in situ laboratory to improve the understanding of the influence of oceanic hydrodynamics on the margin configuration, a key point to achieve better paleoceanographic interpretations. In this sense, due to the complexity of both modern hydrology and morphological configuration of the margin, it would be interesting to understand the relative importance of the control of each environment on surface sedimentation. A better understanding of the processes that link the near bottom circulation and continental slope features is needed. At the same time, this will allow deepening a new field of research in Uruguay, considering the joint and interrelated vision between sedimentary and oceanographic processes. ResumoA Margem Continental do Uruguai está localizada num local estratégico de grande relevância para entender a dinâmica do clima regional e global e para estudar os processos sedimentares. O Río de la Plata representa a maior descarga fluvial do Atlântico Sudoeste (23.000 m3/s de água e 57.000.000 m3/ano de sedimento para o Oceano Atlântico Sul). A circulação de subsuperfície e profunda são caracterizadas pela confluência de massas de água com características termohalinas contrastantes que determinam a formação de frentes hidrográficas bem marcadas. Na plataforma continental, essa característica é representada pela Frente Subtropical da Plataforma, uma extensão rasa da Confluência Brasil-Malvinas que ocorre em águas profundas ao largo da plataforma. Embora seja considerável o conhecimento da circulação regional, existem lacunas significativas no conhecimento da influência deste complexo sistema hidrológico nos processos de sedimentação. O objetivo deste trabalho é sintetizar o conhecimento atual sobre as características morfo-sedimentares da Margem Continental Uruguaia e os processos envolvidos na sua formação. Também pretende discutir algumas lacunas de conhecimento que são objeto de pesquisas atuais na região. O conhecimento reflete a evolução científico-tecnológica a nível global, que se traduz no aumento de trabalhos recentes na vertente continental. Atualmente, a maior parte da informação disponível está associada à plataforma continental interna e ao talude continental superior. Partindo da base da estreita relação entre a batimetria e a distribuição sedimentológica, torna-se claro que os esforços devem ser concentrados na melhor compreensão da interação entre a plataforma e o talude continental. O conhecimento científico sobre sedimentologia e geoquímica ao longo da Margem Continental do Uruguai é ainda escasso e heterogêneo. No entanto, os dados existentes indicam que a cobertura sedimentar presente tanto na plataforma quanto no talude continental é complexa. A Margem Continental do Uruguai pode ser considerada um laboratório in situ para melhorar a compreensão da influência da hidrodinâmica oceânica na configuração da margem, ponto chave para se obterem melhores interpretações paleoceanográficas. Nesse sentido, devido à complexidade da hidrologia moderna e da configuração morfológica da margem, seria interessante entender a importância relativa do controle de cada ambiente sobre a sedimentação superficial. É necessário um melhor entendimento dos processos que ligam as características de circulação próxima do continente à que ocorre no talude continental. Este conhecimento permitirá aprofundar um novo campo de pesquisa no Uruguai, considerando a visão conjunta e inter-relacionada entre processos sedimentares e oceanográficos. 


The Coronation geosyncline developed in the early Proterozoic along the western margin of a continental platform (the Slave Province) of Archaean rocks older than 2300 Ma, and culminated between 1725 and 1855 Ma ago with the emplacement of a pair of batholiths (the Bear Province). The evolution of the geosyncline has a strong family resemblance to Phanerozoic geosynclines believed to delineate ancient continental margins and have been controlled by global plate interactions. Such geosynclines are unknown in Archaean orogenic belts, from which it is inferred that creation of the first large rigid continental platforms marked the end of the Archaean and the beginnings of actualistic plate tectonics. The geosyncline began with deposition of a westward-facing continental shelf, consisting of a lower formation dominated by orthoquartzite, derived from the platform, and an upper cyclic stromatolitic dolomite formation. West of the shelf edge, the dolomite passes abruptly into a much thinner mudstone sequence with dolomite debris-flows, and the orthoquartzite into a thick laminated silt and mudstone sequence with quartzite turbidites. The oldest rocks west of the shelf edge, an area interpreted to have been a continental rise, are pillow basalts and volcanic breccias, extruded above a basement of unknown character. The principal turning point in the evolution of the geosyncline came with the foundering of the continental shelf. It is draped by a thin laminated pyritic black mudstone sequence, overlain by a westward-thickening clastic wedge resulting from intrusion and erosion of the batholiths to the west. The clastic wedge begins with a thick sequence of coarse greywacke turbidites that passes eastward into concretionary mudstone on the platform. The mudstone grades upward into laminated shaly limestone with minor greywacke turbidites, overlain in turn by cross-bedded red lithic sandstone. The supracrustal rocks of the geosyncline have been compressed and tectonically transported toward the platform. Adjacent to the batholithic belt, the continental rise and clastic wedge sequences are penetratively deformed and recrystallized by regional low-pressure metamorphism. To the east, the unmetamorphosed continental shelf and clastic wedge sequences have been flexurally folded and overthrust above a basal detachment surface. East of the thrust zone, relatively thin rocks on the platform are nearly flat-lying except around large anticlinal basement uplifts. Unusual features of the platform are its two aulacogens - long-lived deeply subsiding fault troughs that extend at high angles from the geosyncline far into the interior of the platform. During every phase in the evolution of the geosyncline, the aulacogens received much thicker sedimentary sequences, commonly with the addition of basaltic volcanics, than adjacent parts of the platform. Although equal in thickness to the geosyncline, the aulacogens were never subjected to the batholithic intrusions, regional metamorphism or low-angle overthrusting characteristic of the geosyncline. The Athapuscow aulacogen, in the region of Great Slave Lake, is interpreted as having been an incipient rift, located over a crustal arch, during the continental shelf stage of the geosyncline, but sagged to become a crustal downwarp during the clastic wedge stage, ultimately with sufficient transverse compression to produce broad folds. Finally, the aulacogen became part of a regional transcurrent fault system, along which thick fanglomerates accumulated in local troughs. The batholithic belt consists of two batholiths, eroded to different depths, separated by the northtrending 350 km long Wopmay River fault. The Hepburn batholith, east of the fault, is a composite intrusion of mesozonal granodiorite plutons. The foliated and migmatitic borders of the plutons are normally concordant with wall rock sheaths of sillimanitic paragneiss. Along the eastern margin of the batholith, metamorphosed rocks of the continental rise sequence dip gently to the west beneath the batholithic rocks. Belts of intensely deformed and metamorphosed supracrustal rocks within the batholithic terrain include sequences of pillow basalt, pelites and granite-pebble conglomerate, perhaps the lower part of the continental rise deposited during the initial rifting of the continental margin. The Great Bear batholith, west of the fault, consists of discordant epizonal plutons, mostly adamellite, that intrude broadly folded but regionally unmetamorphosed sequences of welded rhyodacitic ash-flow tuff, trachybasalt and derived sedimentary rocks. The volcanic rocks, intruded by dense dyke swarms radiating from the plutons and by felsite plugs, are interpreted to be comagmatic with the plutons. Mapping is as yet insufficient to establish, speculations aside, the possible relations of the two batholiths to arc-trench systems. Furthermore, the western margin of the batholithic belt, a region of critical importance, is covered by a veneer of younger Proterozoic and Paleozoic sedimentary rocks. Until fossil arc-trench systems are outlined, the contention that the Coronation Geosyncline involved global plate interactions is based on indirect evidence - the analogous evolution of the geosyncline east of the batholithic belt with Phanerozoic geosynclines in which fossil arc-trench systems have been found.


A geological reconnaissance has been made of the continental slope of western Europe between the Faeroe Isles and Lisbon by means of a 60 kj reflexion profiler, supplemented by Boomer profiles and extensive Asdic (side-looking sonar) coverage of the continental shelf. A tentative interpretation of these profiles has been made by references to available rock samples and seismic refraction data. The first-formed continental slope deposits of the north-east Atlantic appear to be Cretaceous in age. Massive erosion (particularly of the continental shelf) preceded the Tertiary phase of downwarping which allowed upbuilding and outbuilding of the continental margin and was followed by a latest-Tertiary and Quaternary phase of important faulting, canyon erosion, slumping and deposition. This episodic evolution of the European continental margin is thought to indicate two phases of continental drift. In contrast to the ground west of the British Isles and France the steep and narrow northern and western continental margins of Iberia show only a little upbuilding and only local outbuilding. The work was done from aboard R.R.S. Discovery II or R.R.S. Discovery (with the exception of a Sparker profile obtained by H.M.T.S. Alert ), the powerful profiler being used in 1965, the Asdic on many cruises between 1958 and 1967.


1995 ◽  
Vol 32 (10) ◽  
pp. 1777-1802 ◽  
Author(s):  
R. D. Hyndman

The deep structure and tectonic history of the continental margin of southwestern Canada have been determined by phase I of the Lithoprobe program across south-central Vancouver Island and associated marine studies across the continental shelf and slope. This article reviews results from the marine portion of the corridor but also presents continuous onshore–offshore data and interpretation. The geophysical data include multichannel seismic reflection, seismic refraction, magnetics, gravity, bathymetry, sea-floor acoustic imagery, heat flow, and seismicity. There has been Ocean Drilling Program (ODP) coring and downhole measurements on the continental slope. The margin structure and Cenozoic tectonic history are dominated by the consequences of subduction. Two narrow terranes, the Eocene volcanic Crescent and the Mesozoic mainly sedimentary Pacific Rim, were emplaced along the coast at the time of north Pacific plate reorganization at 43 Ma. They provide the landward-dipping backstop to a large accretionary sedimentary prism formed from the sediments scraped off the incoming oceanic plate. The prism exhibits active folding, thrusting, and tectonic consolidation, and it provides a model for the formation of ancient fold and thrust belts. An extensive gas hydrate layer was detected beneath the continental slope by a seismic BSR (bottom-simulating reflector) and was penetrated by the ODP drilling. The surface heat flow decreases landward from high values over the young oceanic plate to low values just seaward of the volcanic arc as a consequence of the heat sink provided by the underthrusting oceanic plate. The margin seismicity includes continental crust-events and earthquakes in the downgoing oceanic plate. No earthquakes have been detected on the subduction thrust fault but great thrust events are inferred to occur with an average interval of 600 years. The seismic source zone for such events is restricted to a narrow region beneath the continental shelf because of the high temperatures over the young Juan de Fuca plate.


2014 ◽  
Vol 32 (4) ◽  
pp. 735
Author(s):  
Akihisa Motoki ◽  
Luiz Carlos Chaves Novais ◽  
Kenji Freire Motoki ◽  
Leonardo Costa de Oliveira ◽  
Ricardo De Souza Fasolo ◽  
...  

ABSTRACT. This paper presents the results of satellite-derived gravimetry for Abrolhos Continental Shelf and the adjacent areas, States of Esp´ırito Santo and Bahia,Brazil, and discusses tectonic genesis of the sedimentary basins. The free-air and Bouguer anomalies on the continental shelf show a gradual increase from coast tocontinental shelf break. The total difference of 135 mGal indicates crust thinning of 4.5 km. The Bouguer anomaly increases beyond the shelf break and continues upto the abyssal plane. The total difference of 260 mGal suggests crustal thinning of 9.0 km. The studied area has two types of passive continental margin: 1) ES-typewith high continental slope, low and narrow continental rise, and high free-air and Bouguer anomalies; 2) SP-type with low continental slope, high and wide continentalrise, and low gravity anomalies. There are three types of sedimentary basins with different geologic structure and tectonic genesis: 1) Basins on the continental shelf,CSH-type; 2) Basin on the continental rise, CRS-type; 3) Continental rift basin, CRF-type. The CSH-type, as Esp´ırito Santo basin, has coherent free-air and Bougueranomalies 40 to 50 mGal lower than the adjacent areas. The sedimentary deposits are 2.0 to 2.5 km thick. The basement depression is sustained by mechanical strengthwithout isostatic compensation. The normal faults of basin border are limited within upper crust. The CRS-type, as Pedro Can´ario basin, has low local residual Bougueranomaly with difference of 40 mGal. The sedimentary deposits are more than 2.7 km thick. The continental side basin border is under isostatic compensation due todeep normal fault between continental slope and continental rise. The oceanic side border is sustained by mechanical strength of the basement. The CRF-type, BesnardPassage, is a continental rift basin originated from mantle pull-apart tectonism. The rift bottom is under complete isostatic compensation. The normal faults of the grabenborder continue to the mantle. The Moho depth along the rift is at least 6.5 km shallower than the adjacent areas.Keywords: satellite-derived gravimetry, Abrolhos Continental Shelf, sedimentary basin, crustal thinning, isostatic compensation. RESUMO. Este artigo apresenta os resultados da gravimetria por satélite para a Plataforma Continental de Abrolhos e as áreas adjacentes, ES-BA, e discute as gêneses tectônicas das bacias sedimentares. As anomalias ar-livre e Bouguer na plataforma continental mostram um aumento gradativo a partir da costa até a quebra da plataforma continental. A diferença total de 135mGal indica afinamento da crosta continental de 4,5 km. A anomalia Bouguer se apresenta além da quebra da plataformae continua até o assoalho abissal. A diferença total de 260 mGal sugere afinamento crustal de 9,0 km. Na área estudada, observam-se dois tipos de margem continental passiva: 1) Tipo ES com talude continental alto, elevação continental baixa e curta e anomalias ar-livre e Bouguer altos; 2) Tipo SP com talude continental baixo, elevação continental alta e extensa e anomalias gravimétricas baixas. Existem três tipos de bacias sedimentares com estrutura geológica e gênesis tectônicas diferentes: 1) Bacias na plataforma continental, Tipo CSH; 2) Bacias na elevação continental, Tipo CRS; 3) Bacia de rifte continental, Tipo CRF. O Tipo CSH, como a bacia do Espírito Santo, possui anomalias ar-livre e Bouguer coerentes 40 a 50 mGal mais baixas do que as áreas adjacentes. Os depósitos sedimentares são de 2,0 a 2,5 km de espessura. A depressão do embasamento é sustentada pela rigidez mecânica sem compensação isostática. As falhas normais das bordas de bacias são limitadas dentro da crosta superior. O Tipo CRS, como a bacia Pedro Canário, tem baixa anomalia Bouguer local com diferença de 40 mGal. Os depósitos sedimentares têm mais de 2,7 km de espessura. A borda da bacia do lado continental está sob compensação isostática devido à falha normal profunda entre talude continental e elevação continental. Aborda do lado oceânico é sustentada pela rigidez mecânica do embasamento. O Tipo CRF, Passagem Besnard, é uma bacia do rifte continental originada do tectonis mode distensão do manto. O fundo da bacia está sob compensação isostática completa. As falhas normais da borda do graben continuam até o manto. A profundidade da Moho ao longo do rifte é pelo menos 6,5 km mais rasa do que as áreas adjacentes.Palavras-chave: gravimetria por satélite, Plataforma Continental de Abrolhos, bacia sedimentar, afinamento crustal, compensação isostática.


2002 ◽  
Vol 452 ◽  
pp. 97-121 ◽  
Author(s):  
C. CENEDESE ◽  
P. F. LINDEN

Buoyancy-driven surface currents were generated in the laboratory by releasing buoyant fluid from a source adjacent to a vertical boundary in a rotating container. Different bottom topographies that simulate both a continental slope and a continental ridge were introduced in the container. The topography modified the flow in comparison with the at bottom case where the current grew in width and depth until it became unstable once to non-axisymmetric disturbances. However, when topography was introduced a second instability of the buoyancy-driven current was observed. The most important parameter describing the flow is the ratio of continental shelf width W to the width L* of the current at the onset of the instability. The values of L* for the first instability, and L*−W for the second instability were not influenced by the topography and were 2–6 times the Rossby radius. Thus, the parameter describing the flow can be expressed as the ratio of the width of the continental shelf to the Rossby radius. When this ratio is larger than 2–6 the second instability was observed on the current front. A continental ridge allowed the disturbance to grow to larger amplitude with formation of eddies and fronts, while a gentle continental slope reduced the growth rate and amplitude of the most unstable mode, when compared to the continental ridge topography. When present, eddies did not separate from the main current, and remained near the shelf break. On the other hand, for the largest values of the Rossby radius the first instability was suppressed and the flow was observed to remain stable. A small but significant variation was found in the wavelength of the first instability, which was smaller for a current over topography than over a flat bottom.


Ocean Science ◽  
2019 ◽  
Vol 15 (6) ◽  
pp. 1745-1759 ◽  
Author(s):  
Morane Clavel-Henry ◽  
Jordi Solé ◽  
Miguel-Ángel Ahumada-Sempoal ◽  
Nixon Bahamon ◽  
Florence Briton ◽  
...  

Abstract. Marine biophysical models can be used to explore the displacement of individuals in and between submarine canyons. Mostly, the studies focus on the shallow hydrodynamics in or around a single canyon. In the northwestern Mediterranean Sea, knowledge of the deep-sea circulation and its spatial variability in three contiguous submarine canyons is limited. We used a Lagrangian framework with three-dimensional velocity fields from two versions of the Regional Ocean Modeling System (ROMS) to study the deep-bottom connectivity between submarine canyons and to compare their influence on the particle transport. From a biological point of view, the particles represented eggs and larvae spawned by the deep-sea commercial shrimp Aristeus antennatus along the continental slope in summer. The passive particles mainly followed a southwest drift along the continental slope and drifted less than 200 km considering a pelagic larval duration (PLD) of 31 d. Two of the submarine canyons were connected by more than 27 % of particles if they were released at sea bottom depths above 600 m. The vertical advection of particles depended on the depth where particles were released and the circulation influenced by the morphology of each submarine canyon. Therefore, the impact of contiguous submarine canyons on particle transport should be studied on a case-by-case basis and not be generalized. Because the flows were strongly influenced by the bottom topography, the hydrodynamic model with finer bathymetric resolution data, a less smoothed bottom topography, and finer sigma-layer resolution near the bottom should give more accurate simulations of near-bottom passive drift. Those results propose that the physical model parameterization and discretization have to be considered for improving connectivity studies of deep-sea species.


Sign in / Sign up

Export Citation Format

Share Document