Paleomagnetic and isotopic evidence for the diagenesis and alteration of evaporites in the Paleozoic Elk Point Basin, Saskatchewan, Canada

1997 ◽  
Vol 34 (12) ◽  
pp. 1619-1629 ◽  
Author(s):  
G. Koehler ◽  
T. K. Kyser ◽  
R. Enkin ◽  
E. Irving

In the Paleozoic Elk Point Basin, Saskatchewan, Canada, hematite in evaporite rocks of the Middle Devonian Prairie Formation records two magnetizations that are very different from those expected when the evaporites were originally deposited. The first (X magnetization) corresponds to Cretaceous or Cenozoic paleofield directions and contains both normal and reversed polarities. The second (Y magnetization) appears to be a composite of Cretaceous–Cenozoic and late Paleozoic (Kiaman) reversed polarity directions. The X magnetization occurs in anomalous ores and is associated with fine-grained hematite occurring predominantly along grain boundaries. The Y magnetization occurs in normal ore and is associated with sylvite that has hematite both along grain boundaries and within sylvite crystals, the latter inferred to be of Kiaman age. K–Ar ages of the host sylvites are also composite, and are consistent with those inferred from paleomagnetic directions. Stable isotopic compositions of fluid inclusions in halite and the associated hematite in the Prairie Formation indicate that the hematite carrying the X magnetization formed at low temperature (about 60 °C) by fluids similar to those currently resident in overlying formations. The hematite carrying the inferred late Paleozoic magnetization was also formed at low temperatures by fluids having δD and δ18O values significantly lower than Paleozoic seawater. Paleomagnetic, petrographic, and isotopic data, and K–Ar ages indicate that evaporites in the Elk Point Basin have been affected by major fluid events that occurred during the late Paleozoic and Cretaceous–Cenozoic. These fluids are most probably related to brines mat have their origins within the basin, which were mobilized by major tectonic events.

Alloy Digest ◽  
2019 ◽  
Vol 68 (8) ◽  

Abstract Aldur 500 steels (minimum yield strength of 500 MPa, or 73 ksi, for thicknesses up to 50 mm, or 2 in.) are a part family of water-quenched, high-strength, fine-grained steels that have excellent toughness at low temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on low temperature performance. Filing Code: SA-850. Producer or source: Voestalpine Grobblech GmbH.


Alloy Digest ◽  
2019 ◽  
Vol 68 (12) ◽  

Abstract Aldur 900 steels (minimum yield strength of 900 MPa, or 131 ksi, for thicknesses up to 50 mm, or 2 in.) are a part of a family of waterquenched, high-strength, fine-grained steels that have excellent toughness at low temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on low temperature performance. Filing Code: SA-857. Producer or source: Voestalpine Grobblech GmbH.


Alloy Digest ◽  
2019 ◽  
Vol 68 (10) ◽  

Abstract Aldur 620 steels (minimum yield strength of 620 MPa, or 90 ksi, for thicknesses up to 50 mm, or 2 in.) are a part family of water-quenched, high-strength, fine-grained steels that have excellent toughness at low temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on low temperature performance. Filing Code: SA-853. Producer or source: Voestalpine Grobblech GmbH.


Alloy Digest ◽  
2019 ◽  
Vol 68 (9) ◽  

Abstract Aldur 550 steels (minimum yield strength of 550 MPa, or 80 ksi, for thicknesses up to 50 mm, or 2 in.) are a part family of water-quenched, high-strength, fine-grained steels that have excellent toughness at low temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on low temperature performance. Filing Code: SA-851. Producer or source: Voestalpine Grobblech GmbH.


Author(s):  
F. H. Louchet ◽  
L. P. Kubin

Experiments have been carried out on the 3 MeV electron microscope in Toulouse. The low temperature straining holder has been previously described Images given by an image intensifier are recorded on magnetic tape.The microtensile niobium samples are cut in a plane with the two operative slip directions [111] and lying in the foil plane. The tensile axis is near [011].Our results concern:- The transition temperature of niobium near 220 K: at this temperature and below an increasing difference appears between the mobilities of the screw and edge portions of dislocations loops. Source operation and interactions between screw dislocations of different slip system have been recorded.


Alloy Digest ◽  
2008 ◽  
Vol 57 (1) ◽  

Abstract Invar is an Fe-Ni alloy with 36% Ni content that exhibits the lowest expansion of known metals from very low temperatures up to approximately 230 deg C (445 deg F). Invar M93 is a cryogenic Invar with improved weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear and bend strength as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as forming and joining. Filing Code: FE-143. Producer or source: Metalimphy Precision Alloys.


Alloy Digest ◽  
1983 ◽  
Vol 32 (4) ◽  

Abstract TRI-MARK TM-811N2 is a flux-cored welding electrode for all position semiautomatic arc welding. It is designed to weld 2-3% nickel steels for applications requiring good toughness at subzero temperatures; in addition, it is used to weld various other high-strength low-alloy steels and various fine-grained steels with low-temperature toughness. Tri-Mark TM-811N2 is used to deposit typically 2.35% nickel steel weld metal with good low-temperature impact properties. It is used for shipbuilding, oil rigs and similar structures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-389. Producer or source: Tri-Mark Inc..


2014 ◽  
Vol 986-987 ◽  
pp. 80-83
Author(s):  
Xiao Xue Zhang ◽  
Zhen Feng Wang ◽  
Cui Hua Li ◽  
Jian Hong Liu ◽  
Qian Ling Zhang

N-methyl-N-allylpyrrolidinium bis (trifluoromethanesulfonyl) imide (PYR1ATFSI) with substantial supercooling behavior is synthesized to develop low temperature electrolyte for lithium-ion batteries. Additive fluoroethylene carbonate (FEC) in LiTFSI/PYR1ATFSI/EC/PC/EMC is found that it can reduce the freezing point. LiFePO4/Li coin cells with the FEC-PYR1ATFSI electrolyte exhibit good capacity retention, reversible cycling behavior at low temperatures. The good performance can be attributed to the decrease in the freezing point and the polarization of the composite electrolyte.


1972 ◽  
Vol 25 (7) ◽  
pp. 1411 ◽  
Author(s):  
LE Lyons ◽  
LJ Warren

The low-temperature fluorescence spectrum of purified vapour-grown anthracene single crystals is presented and the free-exciton emission distinguished from a number of defect or impurity bands present even in the purest crystals. In assigning the observed bands the symmetry of the active vibrations and the origin of background fluorescence and deformation bands are discussed. The phonon structure in the region of the fluorescence origin was found to be almost completely b-polarized. Emission of electronic origin (25103 cm-1) was too weak to be observed. Polarization ratios of the principal vibronio bands at 5.6 K are given.


2014 ◽  
Vol 14 (3) ◽  
pp. 479-488 ◽  
Author(s):  
T. Backhaus ◽  
R. de la Torre ◽  
K. Lyhme ◽  
J.-P. de Vera ◽  
J. Meeßen

AbstractSeveral investigations on lichen photobionts (PBs) after exposure to simulated or real-space parameters consistently reported high viability and recovery of photosynthetic activity. These studies focused on PBs within lichen thalli, mostly exposed in a metabolically inactive state. In contrast, a recent study exposed isolated and metabolically active PBs to the non-terrestrial stressor UVC254 nm and found strong impairment of photosynthetic activity and photo-protective mechanisms (Meeßen et al. in 2014b). Under space and Mars conditions, UVC is accompanied by other stressors as extreme desiccation and low temperatures. The present study exposed the PBs of Buellia frigida and Circinaria gyrosa, to UVC in combination with desiccation and subzero temperatures to gain better insight into the combined stressors' effect and the PBs' inherent potential of resistance. These effects were examined by chlorophyll a fluorescence which is a good indicator of photosynthetic activity (Lüttge & Büdel in 2010) and widely used to test the viability of PBs after (simulated) space exposure. The present results reveal fast recovery of photosynthetic activity after desiccation and subzero temperatures. Moreover, they demonstrate that desiccation and cold confer an additional protective effect on the investigated PBs and attenuate the PBs' reaction to another stressor – even if it is a non-terrestrial one such as UVC. Besides other protective mechanisms (anhydrobiosis, morphological–anatomical traits and secondary lichen compounds), these findings may help to explain the high resistance of lichens observed in astrobiological studies.


Sign in / Sign up

Export Citation Format

Share Document