Lithospheric structure in northwestern Canada from Lithoprobe seismic refraction and related studies: a synthesis

2005 ◽  
Vol 42 (6) ◽  
pp. 1277-1293 ◽  
Author(s):  
Ron M Clowes ◽  
Philip TC Hammer ◽  
Gabriela Fernández-Viejo ◽  
J Kim Welford
Keyword(s):  
Seismic Data ◽  
Seismic Refraction ◽  
Velocity Model ◽  
Wide Angle ◽  
Slave Craton ◽  
Reflection Data ◽  
Western Cordillera ◽  
Thermal Constraints ◽  
Geological Information ◽  
Tectonic Boundaries

The SNORCLE refraction – wide-angle reflection (R/WAR) experiment, SNORE'97, included four individual lines along the three transect corridors. A combination of SNORE'97 results with those from earlier studies permits generation of a 2000 km long lithospheric velocity model that extends from the Archean Slave craton to the present Pacific basin. Using this model and coincident near-vertical incidence (NVI) reflection data and geological information, an interpreted cross section that exemplifies 4 Ga of lithospheric development is generated. The velocity structural models correlate well with the reflection sections and provide additional structural, compositional, and thermal constraints. Geological structures and some faults are defined in the upper crust. At a larger scale, the seismic data identify a variety of orogenic styles ranging from thin- to thick-skinned accretion in the Cordillera and crustal-scale tectonic wedging associated with both Paleoproterozoic and Mesozoic collisions. Models of Poisson's ratio support the NVI interpretation that a thick wedge of cratonic metasediments underlies the eastern accreted Cordilleran terranes. Despite the variety of ages, orogenic styles, and tectono-magmatic deformations that are spanned by the seismic corridors, the Moho remains remarkably flat and shallow (33–36 km) across the majority of the transect. Significant variations only occur at major tectonic boundaries. Laterally variable crustal velocities are consistently slower beneath the Cordillera than beneath the cratonic crust. This is consistent with the high temperatures (800–900 °C) required by the slow upper mantle velocities (7.8–7.9 km/s) observed beneath much of the Cordillera. Heterogeneity of the lithospheric mantle is indicated by wide-angle reflections below the Precambrian domains and the western Cordillera.

scholarly journals Study on the limitations of travel-time inversion applied to sub-basalt imaging

Solid Earth ◽  
2013 ◽  
Vol 4 (2) ◽  
pp. 543-554 ◽  
Author(s):  
I. Flecha ◽  
R. Carbonell ◽  
R. W. Hobbs
Keyword(s):  
Oil Industry ◽  
Velocity Model ◽  
Time Inversion ◽  
Wide Angle ◽  
Seismic Reflection Data ◽  
Additional Information ◽  
Velocity Models ◽  
Reflection Data ◽  
Travel Time Inversion ◽  
Tomographic Inversions

Abstract. The difficulties of seismic imaging beneath high velocity structures are widely recognised. In this setting, theoretical analysis of synthetic wide-angle seismic reflection data indicates that velocity models are not well constrained. A two-dimensional velocity model was built to simulate a simplified structural geometry given by a basaltic wedge placed within a sedimentary sequence. This model reproduces the geological setting in areas of special interest for the oil industry as the Faroe-Shetland Basin. A wide-angle synthetic dataset was calculated on this model using an elastic finite difference scheme. This dataset provided travel times for tomographic inversions. Results show that the original model can not be completely resolved without considering additional information. The resolution of nonlinear inversions lacks a functional mathematical relationship, therefore, statistical approaches are required. Stochastic tests based on Metropolis techniques support the need of additional information to properly resolve sub-basalt structures.

Crustal structure across the Three Gorges area of the Yangtze platform, central China, from seismic refraction/wide-angle reflection data

2009 ◽  
Vol 475 (3-4) ◽  
pp. 423-437 ◽  
Author(s):  
Zhongjie Zhang ◽  
Zhiming Bai ◽  
Walter Mooney ◽  
Chunyong Wang ◽  
Xuebo Chen ◽  
...  
Keyword(s):  
Crustal Structure ◽  
Seismic Refraction ◽  
Central China ◽  
Wide Angle ◽  
Three Gorges ◽  
Yangtze Platform ◽  
Three Gorges Area ◽  
Reflection Data ◽  
The Three Gorges

scholarly journals Study on the limitations of traveltime inversion in the presence of extreme velocity anomalies

2013 ◽  
Vol 5 (1) ◽  
pp. 189-226
Author(s):  
I. Flecha ◽  
R. Carbonell ◽  
R. W. Hobbs
Keyword(s):  
Oil Industry ◽  
Velocity Model ◽  
Wide Angle ◽  
Seismic Reflection Data ◽  
Traveltime Inversion ◽  
Additional Information ◽  
Velocity Models ◽  
Reflection Data ◽  
Velocity Anomalies ◽  
Tomographic Inversions

Abstract. The difficulties of seismic imaging beneath high velocity structures are widely recognised. In this setting, theoretical analysis of synthetic wide-angle seismic reflection data indicates that velocity models are not well constrained. A two-dimensional velocity model was built to simulate a simplified structural geometry given by a basaltic wedge placed within a sedimentary sequence. This model reproduces the geological setting in areas of special interest for the oil industry as the Faroe-Shetland Basin. A wide-angle synthetic dataset was calculated on this model using an elastic finite difference scheme. This dataset provided travel times for tomographic inversions. Results show that the original model can not be completely resolved without considering additional information. The resolution of nonlinear inversions lacks a functional mathematical relationship, therefore, statistical approaches are required. Stochastical tests based on Metropolis techniques support the need of additional information to properly resolve subbasalt structures.

Shifted-elliptical nonstretch moveout correction of wide-angle seismic data in the τ-p domain, using an example from the Faeroe-Shetland Basin

Geophysics ◽  
2012 ◽  
Vol 77 (5) ◽  
pp. B227-B236 ◽  
Author(s):  
Hassan Masoomzadeh ◽  
Satish C. Singh ◽  
Penny J. Barton
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Wide Angle ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Angle Data ◽  
Vertical Heterogeneity ◽  
P Domain

We developed a method of moveout correction in the [Formula: see text] domain to tackle some of the problems associated with processing wide-angle seismic reflection data, including residual moveout and normal-moveout stretching. We evaluated the concept of the shifted ellipse in the [Formula: see text] domain as an alternative to the well-known concept of the shifted hyperbola in the [Formula: see text] domain. We used this shifted-ellipse concept to address the problem of residual moveout caused by vertical heterogeneity in the subsurface. We also addressed the stretching problem associated with dynamic corrections by combining selected strips from a set of constant-moveout stacks generated using a shifted-ellipse equation. Application of this method to a wide-angle data set from the Faeroe-Shetland Basin provided an enhanced image of the subbasalt structure.

Mapping the continent-ocean transition in the Eastern Black Sea Basin

2020 ◽  
Author(s):  
Tim Minshull ◽  
Vanessa Monteleone ◽  
Hector Marin Moreno ◽  
Donna Shillington
Keyword(s):  
Continental Crust ◽  
Oceanic Crust ◽  
Black Sea ◽  
Seismic Data ◽  
Wide Angle ◽  
Seismic Velocities ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Rifted Margins ◽  
Geodynamic Processes

<p>The transition from continental to oceanic crust at rifted margins is characterised by changes in a variety of parameters including crustal thickness, basement morphology and magnetisation. Rifted margins also vary significantly in the degree of magmatism that is associated with breakup. The Eastern Black Sea Basin formed by backarc extension in late Cretaceous to early Cenozoic times, by the rotation of Shatsky Ridge relative to the Mid Black Sea High. Wide-angle seismic data show that anomalously thick oceanic crust is present in the southeast of the basin, while further to the northwest the crust is thinner in the centre of the basin. This thinner crust has seismic velocities that are anomalously low for oceanic crust, but is significantly magnetised and has a similar basement morphology to the thicker crust to the southeast. We synthesise constraints from wide-angle seismic data, magnetic anomaly data and new long-offset seismic reflection data into an integrated interpretation of the location and nature of the continent-ocean transition within the basin. Northwest to southeast along the axis of the basin, we infer a series of transitions from mildly stretched continental crust at the Mid Black Sea High to hyper-thinned continental crust, then to thin oceanic crust, and finally to anomalously thick oceanic crust. We explore the geodynamic processes that may have led to this configuration.</p>

Stappen High-Bjørnøya tectono-sedimentary element, Barents Sea

2021 ◽  
pp. M57-2016-24
Author(s):  
F. Tsikalas ◽  
O. A. Blaich ◽  
J. I. Faleide ◽  
S. Olaussen
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Barents Sea ◽  
Seismic Reflection Data ◽  
Structural Inheritance ◽  
Reflection Data ◽  
Geological Information ◽  
Northern Portion ◽  
Early Cenozoic ◽  
Shallow Platform

AbstractThe Stappen High-Bjørnøya tectono-sedimentary element (TSE) is located in the western Barents Shelf and is one of the prominent tectonic elements in the area. The Stappen High comprises a shallow platform, and Bjørnøya forms its highest point with exposed outcrops. Modern seismic reflection data of improved quality in the southern part of the TSE and vintage seismic data in the northern portion are utilised. Together with updated geological information at Bjørnøya, the study provides insights into the Palaeozoic to early Cenozoic evolution of the Stappen High-Bjørnøya TSE. In this context, we discuss structural inheritance, the rift development, and we account for confirmed and potential hydrocarbon systems and plays.

Relaxing the initial model constraint for crustal-scale full-waveform inversion with graph-space optimal transport misfit function

2020 ◽  
Author(s):  
Andrzej Górszczyk ◽  
Ludovic Métivier ◽  
Romain Brossier
Keyword(s):  
Seismic Data ◽  
Optimal Transport ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Wide Angle ◽  
Initial Model ◽  
Full Waveform ◽  
Long Offset ◽  
Obs Data

<p>Investigations of the deep lithosphere aiming at the reconstruction of the geological models remain one of the key sources of the knowledge about the processes shaping the outer shell of our planet. Among different methods, the active seismic Ocean-Bottom Seismometer (OBS) experiments conducted in wide-angle configuration are routinely employed to better understand these processes. Indeed, long-offset seismic data, combined with computationally efficient travetime tomographic methods, have a great potential to constrain the macro-scale subsurface velocity models at large depths. </p><p>On the other hand, decades of development of acquisition systems, more and more efficient algorithms and high-performance computing resources make it now feasible to move beyond the regional raytracing-based traveltime tomography. In particular, the waveform inversion methods, such as Full-Waveform Inversion (FWI), are able to exhaustively exploit the rich information collected along the long-offset diving and refraction wavepaths, additionally enriched with the wide-angle reflection arrivals. So far however, only a few attempts have been conducted in the academic community to combine wide-angle seismic data with FWI for high-resolution crustal-scale velocity model reconstruction. This is partially due to the non-convexity of FWI misfit function, which increases with the complexity of the geological setting reflected by the seismograms. </p><p>In its classical form FWI is a nonlinear least-squares problem, which is solved through the local optimization techniques. This imposes the strong constraint on the accuracy of the starting FWI model. To avoid cycle-skipping problem the initial model must predict synthetic data within the maximum error of half-period time-shift with respect to the observed data. The criterion is difficult to fulfil when facing the crustal-scale FWI, because the long-offset acquisition translates to the long time of wavefront propagation and therefore accumulation of the traveltime error along the wavepath simulated in the initial model. This in turns increases the possibility of the cycle-skipping taking into account large number of propagated wavelengths.</p><p>Searching to mitigate this difficulty, here we investigate FWI with a Graph-Space Optimal Transport (GSOT) misfit function. Comparing to the classical least-squares norm, GSOT is convex with respect to the patterns in the waveform which can be shifted in time for more than half-period. Therefore, with proper data selection strategy GSOT misfit-function has potential to reduce the risk of cycle-skipping. We demonstrate the robustness of this novel approach using 2D wide-angle OBS data-set generated in a GO_3D_OBS synthetic model of subduction zone (30 km x 175 km). We show that using GSOT cost-function combined with the multiscale FWI strategy, we reconstruct in details the highly complex geological structure starting from a simple 1D velocity model. We believe that further developments of OT-based misfit functions can significantly reduce the constraints on the starting model accuracy and reduce the overall risk of cycle-skipping during FWI of wide-angle OBS data.</p>

Sign in / Sign up

Export Citation Format

Share Document