Development of a folded thrust stack: Humber Arm Allochthon, Bay of Islands, Newfoundland Appalachians

2003 ◽  
Vol 40 (2) ◽  
pp. 237-253 ◽  
Author(s):  
John WF Waldron ◽  
Amber D Henry ◽  
James C Bradley ◽  
Sarah E Palmer

In the Humber Arm area of the western Newfoundland Appalachians, four distinct stratigraphic successions derived from the Laurentian continental margin are exposed. Each succession is believed to be characteristic of a separate thrust sheet. The platform sheet represents the ancient Laurentian shelf and its foreland basin cover; the Watsons Brook sheet is characterized by a succession including shelf-margin carbonates overlying foreland basin clastics; the Corner Brook sheet comprises continental slope and rise clastic and carbonate sedimentary rocks of the Humber Arm Supergroup; and the Woods Island sheet includes clastics of the Blow Me Down Brook formation that overlie mafic volcanics. Sheets are subdivided by thrusts into tectonic slices. Disrupted units and mélange, with scaly S1 foliation, are found along the boundaries of some slices. Thrust sheets and related structures have been deformed by F2 folds with axial planar S2 cleavage. S1 scaly foliations are transposed into parallelism with S2. There is a transition in the style of F2 folds across the area, from upright and subhorizontal in the west to overturned folds with west-dipping axial planes and steeply raking or reclined fold hinges in the east. Strongly curved fold hinges may reflect later shearing along the S2 surfaces, producing sheath-like fold geometries. Shear zones close to the east edge of the outcrop of the Watsons Brook sheet display kinematic indicators indicating both D2 reverse-sense and D3 normal-sense dip-slip shears. Subsequent events produced L4 and L5 crenulation lineations on the S2 surfaces. At minimum, several tens of kilometres of shortening affected the part of the margin preserved in the Humber Arm area; true shortening and transport amounts may have been much larger.

2021 ◽  
Author(s):  
◽  
Geoffrey Jonathan Rait

<p>Raukumara Peninsula lies at the northeastern end of the East Coast Deformed Belt, a province of deformed Late Mesozoic-Late Cenozoic rocks on the eastern edges of the North Island and northern South Island of New Zealand. Late Cenozoic deformation in this province is associated with westward subduction of the Pacific Plate, which started at about the beginning of the Miocene. Early Miocene tectonism on Raukumara Peninsula took place in a hitherto little-known thrust belt, the East Coast Allochthon. The configuration, evolution and origin of this thrust belt are the subjects of this thesis. The thrust belt extends 110 km from the thrust front in the southwest to the northeastern tip of Raukumara Peninsula. Internal structures strike northwest, perpendicular to the present trend of the continental margin but parallel to the Early Miocene trend suggested by plate reconstructions and paleomagnetic studies. The structure and kinematic evolution of the thrust belt were investigated by detailed mapping of three key areas in its central part and by analysis of previous work throughout the region. Gross differences in structure lead to the division of the belt into three zones: southern, central and northern. Deformation in the southern and central zones (the southwestern two-thirds of the system) was thin-skinned, involving southwestward transport of thrust sheets above a decollement horizon at the top of the Maastrichtian-Paleocene Whangai Formation. The decollement is exposed in the northwest due to southeastward tilting accompanying post-Miocene uplift of the Raukumara Range. Deformation in the northern zone involved reactivations of northeast-directed Cretaceous thrusts as well as southwestward emplacement of allochthonous sheets. Stratigraphic relationships show that thrusting took place during = 6 m.y. in the earliest Miocene. The 18 km wide southern zone is an emergent imbricate fan of rocks detached from above the Whangai Formation in a piggy-back sequence and transported less than about 18 km at rates of 2.6-3.6 mm/yr (plus-minus 20%-100%). The central and northern zones include rocks older than Whangai Formation. The sheets of the central zone and the southwest-directed sheets of the northern zone make up three major allochthonous units: the Waitahaia allochthon, consisting predominantly of mid-Cretaceous flysch above the Waitahaia Fault and equivalent structures, at the bottom of the thrust pile; the Te Rata allochthon, of Late Cretaceous-Early Tertiary continental margin sediments above the Te Rata Thrust, in the middle; and the Matakaoa sheet, an ophiolite body of mid-Cretaceous-Eocene basaltic and pelagic sedimentary rocks, at the top and back of the thrust belt. The Waitahaia allochthon was emplaced first and was subsequently breached by the Te Rata Thrust. The mid-Cretaceous rocks of the Waitahaia allochthon are mostly overturned, a result of the southwest-directed Early Miocene thrusting overprinting a Cretaceous structure of predominantly southwestward dips. The Te Rata allochthon comprises a complex pile of thrust sheets and slices with a general older-on-younger stacking order but with common reversals. Synorogenic sedimentary rocks occur within it. The complexity of internal structure of these two allochthons suggests they have undergone more than the 50% shortening estimated for the southern zone. The minimum southwestward displacement of the Te Rata allochthon is 60 km. The minimum displacements of the Waitahaia and Matakaoa allochthons are 55-195 km and 115-530 km respectively, depending on whether the Te Rata allochthon originally lay in front of the original position of the Waitahaia allochthon or was originally the upper part of the Waitahaia allochthon, and on the amounts of internal shortening of the allochthons. Over the = 6 m.y. period of thrusting, these estimates imply displacement rates for the Matakaoa sheet of 19-88 mm/yr. The average plate convergence rate at East Cape for the period 36-20 Ma is estimated at 25-30 mm/yr; the rate for the Early Miocene-- when subduction was active--may have been faster. Reasonable displacement rates for the Matakaoa sheet would result if the Te Rata allochthon was originally the upper part of the Waitahaia allochthon and if both allochthons have been shortened somewhat less than 50%. The emplacement mechanism of the Matakaoa ophiolite is elucidated by comparison with Northland, northwest along strike from Raukumara Peninsula, onto which correlative rocks were emplaced at the same time. The thinness of the Northland ophiolite bodies, their composition of rocks typical of the uppermost levels of oceanic crust, and the start of andesitic volcanism accompanying their obduction show that they were emplaced as a thin flake of oceanic crust which peeled off the downgoing slab during the inception of southwestward subduction. The reason the ophiolites were initially peeled from the slab is probably that their upper levels prograded southwestward over sediments of the Northland-Raukumara continental margin. In such a situation, initial compression would have led to formation of a northeast-dipping thrust at the volcanic/sediment interface; this thrust would then have propagated back into the downgoing plate with continued convergence, allowing the ophiolites to climb up the continental slope pushing the allochthonous sedimentary sheets ahead of them.</p>


1998 ◽  
Vol 35 (11) ◽  
pp. 1271-1287 ◽  
Author(s):  
John WF Waldron ◽  
Scott D Anderson ◽  
Peter A Cawood ◽  
Laurel B Goodwin ◽  
Jeremy Hall ◽  
...  

The Humber Zone of the western Newfoundland Appalachians represents the early Paleozoic Laurentian margin established by Neoproterozoic rifting. After a period of passive margin thermal subsidence, Taconian deformation began in the Early Ordovician with westward thrusting. Subsequently, an extensive foreland basin developed beneath the Gulf of St. Lawrence. It records rapid Late Ordovician to Early Silurian subsidence; mid-Silurian erosion; and renewed Late Silurian to Devonian subsidence. The Humber Zone was traversed by Lithoprobe seismic reflection profiles. Within the external part of the orogen, seismic reflections in the upper crustal section appear more coherent where seismic lines are parallel to fold hinges. Some subhorizontal reflectors are interpreted as thrust sheets of shelf limestone, but others probably represent intrabasement structures. A group of moderately northwest-dipping reflections probably represents late extensional shear zones. On the Baie Verte Peninsula, low-angle reflections passing beneath the Baie Verte Line are probably also late extensional shears, possibly reactivating earlier thrusts. Tectonism in the Humber Zone probably began with attempted eastward subduction of the Laurentian margin. Deep burial of the margin, accompanied by eclogite-facies metamorphism, probably coincided with rapid subsidence in the foreland basin. Later Barrovian metamorphism was associated with cleavage development and east-directed shear, and with dextral oblique slip, in Baie Verte Peninsula. Later Silurian sinistral transpression with thrusting east of the Baie Verte Line was followed by dextral transpression to transtension. "Acadian" thrusting dominated the western margin of the orogen in the Devonian and possibly earliest Carboniferous.


The Coronation geosyncline developed in the early Proterozoic along the western margin of a continental platform (the Slave Province) of Archaean rocks older than 2300 Ma, and culminated between 1725 and 1855 Ma ago with the emplacement of a pair of batholiths (the Bear Province). The evolution of the geosyncline has a strong family resemblance to Phanerozoic geosynclines believed to delineate ancient continental margins and have been controlled by global plate interactions. Such geosynclines are unknown in Archaean orogenic belts, from which it is inferred that creation of the first large rigid continental platforms marked the end of the Archaean and the beginnings of actualistic plate tectonics. The geosyncline began with deposition of a westward-facing continental shelf, consisting of a lower formation dominated by orthoquartzite, derived from the platform, and an upper cyclic stromatolitic dolomite formation. West of the shelf edge, the dolomite passes abruptly into a much thinner mudstone sequence with dolomite debris-flows, and the orthoquartzite into a thick laminated silt and mudstone sequence with quartzite turbidites. The oldest rocks west of the shelf edge, an area interpreted to have been a continental rise, are pillow basalts and volcanic breccias, extruded above a basement of unknown character. The principal turning point in the evolution of the geosyncline came with the foundering of the continental shelf. It is draped by a thin laminated pyritic black mudstone sequence, overlain by a westward-thickening clastic wedge resulting from intrusion and erosion of the batholiths to the west. The clastic wedge begins with a thick sequence of coarse greywacke turbidites that passes eastward into concretionary mudstone on the platform. The mudstone grades upward into laminated shaly limestone with minor greywacke turbidites, overlain in turn by cross-bedded red lithic sandstone. The supracrustal rocks of the geosyncline have been compressed and tectonically transported toward the platform. Adjacent to the batholithic belt, the continental rise and clastic wedge sequences are penetratively deformed and recrystallized by regional low-pressure metamorphism. To the east, the unmetamorphosed continental shelf and clastic wedge sequences have been flexurally folded and overthrust above a basal detachment surface. East of the thrust zone, relatively thin rocks on the platform are nearly flat-lying except around large anticlinal basement uplifts. Unusual features of the platform are its two aulacogens - long-lived deeply subsiding fault troughs that extend at high angles from the geosyncline far into the interior of the platform. During every phase in the evolution of the geosyncline, the aulacogens received much thicker sedimentary sequences, commonly with the addition of basaltic volcanics, than adjacent parts of the platform. Although equal in thickness to the geosyncline, the aulacogens were never subjected to the batholithic intrusions, regional metamorphism or low-angle overthrusting characteristic of the geosyncline. The Athapuscow aulacogen, in the region of Great Slave Lake, is interpreted as having been an incipient rift, located over a crustal arch, during the continental shelf stage of the geosyncline, but sagged to become a crustal downwarp during the clastic wedge stage, ultimately with sufficient transverse compression to produce broad folds. Finally, the aulacogen became part of a regional transcurrent fault system, along which thick fanglomerates accumulated in local troughs. The batholithic belt consists of two batholiths, eroded to different depths, separated by the northtrending 350 km long Wopmay River fault. The Hepburn batholith, east of the fault, is a composite intrusion of mesozonal granodiorite plutons. The foliated and migmatitic borders of the plutons are normally concordant with wall rock sheaths of sillimanitic paragneiss. Along the eastern margin of the batholith, metamorphosed rocks of the continental rise sequence dip gently to the west beneath the batholithic rocks. Belts of intensely deformed and metamorphosed supracrustal rocks within the batholithic terrain include sequences of pillow basalt, pelites and granite-pebble conglomerate, perhaps the lower part of the continental rise deposited during the initial rifting of the continental margin. The Great Bear batholith, west of the fault, consists of discordant epizonal plutons, mostly adamellite, that intrude broadly folded but regionally unmetamorphosed sequences of welded rhyodacitic ash-flow tuff, trachybasalt and derived sedimentary rocks. The volcanic rocks, intruded by dense dyke swarms radiating from the plutons and by felsite plugs, are interpreted to be comagmatic with the plutons. Mapping is as yet insufficient to establish, speculations aside, the possible relations of the two batholiths to arc-trench systems. Furthermore, the western margin of the batholithic belt, a region of critical importance, is covered by a veneer of younger Proterozoic and Paleozoic sedimentary rocks. Until fossil arc-trench systems are outlined, the contention that the Coronation Geosyncline involved global plate interactions is based on indirect evidence - the analogous evolution of the geosyncline east of the batholithic belt with Phanerozoic geosynclines in which fossil arc-trench systems have been found.


1988 ◽  
Vol 25 (10) ◽  
pp. 1687-1702 ◽  
Author(s):  
Michael R. McDonough ◽  
Philip S. Simony

Two gneiss bodies are contained in thrust sheets on the west edge of the Rocky Mountain Main Ranges near Valemount, British Columbia. The Bulldog Gneiss comprises Aphebian or older paragneiss and amphibolitic gneiss intruded by Aphebian orthogneiss sheets. The Yellowjacket Gneiss is granodioritic orthogneiss of unknown age. Both gneiss bodies are basement highs with thin Hadrynian metasediment cover sequences. The cover sequences are assigned to the lower Miette Group and are correlated with Horsethief Creek Group.Internal shortening of gneiss thrust sheets is expressed by recumbent folding and stacking of thin thrust sheets of gneiss and cover. The Bulldog Gneiss and its cover were carried on the postmetamorphic Purcell Thrust. The Yellowjacket Gneiss and its cover were carried on the pre- to synmetamorphic Bear Foot Thrust. Northeast and northwest displacement is documented on the moderately southwest-dipping Bear Foot Thrust, and a dextral oblique-slip – thrust model is proposed to explain the duality of thrust and dextral strike-slip kinematic indicators in mylonite from the fault. An estimate of shortening in the fore-land suggests that basement thrust sheets were translated more than 200 km to the northeast.Correlation of gneisses and cover with the westerly adjacent Malton Gneiss and its cover precludes major dextral strike-slip motion on the Southern Rocky Mountain Trench (SRMT) during and after thrusting. The SRMT was the locus of post-thrusting and postmetamorphic, Eocene(?), brittle, west-side-down, normal faulting.


2009 ◽  
Vol 170 (1-2) ◽  
pp. 1-12 ◽  
Author(s):  
Elton Luiz Dantas ◽  
Carlos Jose Souza de Alvarenga ◽  
Roberto Ventura Santos ◽  
Márcio Martins Pimentel

2021 ◽  
Author(s):  
◽  
Geoffrey Jonathan Rait

<p>Raukumara Peninsula lies at the northeastern end of the East Coast Deformed Belt, a province of deformed Late Mesozoic-Late Cenozoic rocks on the eastern edges of the North Island and northern South Island of New Zealand. Late Cenozoic deformation in this province is associated with westward subduction of the Pacific Plate, which started at about the beginning of the Miocene. Early Miocene tectonism on Raukumara Peninsula took place in a hitherto little-known thrust belt, the East Coast Allochthon. The configuration, evolution and origin of this thrust belt are the subjects of this thesis. The thrust belt extends 110 km from the thrust front in the southwest to the northeastern tip of Raukumara Peninsula. Internal structures strike northwest, perpendicular to the present trend of the continental margin but parallel to the Early Miocene trend suggested by plate reconstructions and paleomagnetic studies. The structure and kinematic evolution of the thrust belt were investigated by detailed mapping of three key areas in its central part and by analysis of previous work throughout the region. Gross differences in structure lead to the division of the belt into three zones: southern, central and northern. Deformation in the southern and central zones (the southwestern two-thirds of the system) was thin-skinned, involving southwestward transport of thrust sheets above a decollement horizon at the top of the Maastrichtian-Paleocene Whangai Formation. The decollement is exposed in the northwest due to southeastward tilting accompanying post-Miocene uplift of the Raukumara Range. Deformation in the northern zone involved reactivations of northeast-directed Cretaceous thrusts as well as southwestward emplacement of allochthonous sheets. Stratigraphic relationships show that thrusting took place during = 6 m.y. in the earliest Miocene. The 18 km wide southern zone is an emergent imbricate fan of rocks detached from above the Whangai Formation in a piggy-back sequence and transported less than about 18 km at rates of 2.6-3.6 mm/yr (plus-minus 20%-100%). The central and northern zones include rocks older than Whangai Formation. The sheets of the central zone and the southwest-directed sheets of the northern zone make up three major allochthonous units: the Waitahaia allochthon, consisting predominantly of mid-Cretaceous flysch above the Waitahaia Fault and equivalent structures, at the bottom of the thrust pile; the Te Rata allochthon, of Late Cretaceous-Early Tertiary continental margin sediments above the Te Rata Thrust, in the middle; and the Matakaoa sheet, an ophiolite body of mid-Cretaceous-Eocene basaltic and pelagic sedimentary rocks, at the top and back of the thrust belt. The Waitahaia allochthon was emplaced first and was subsequently breached by the Te Rata Thrust. The mid-Cretaceous rocks of the Waitahaia allochthon are mostly overturned, a result of the southwest-directed Early Miocene thrusting overprinting a Cretaceous structure of predominantly southwestward dips. The Te Rata allochthon comprises a complex pile of thrust sheets and slices with a general older-on-younger stacking order but with common reversals. Synorogenic sedimentary rocks occur within it. The complexity of internal structure of these two allochthons suggests they have undergone more than the 50% shortening estimated for the southern zone. The minimum southwestward displacement of the Te Rata allochthon is 60 km. The minimum displacements of the Waitahaia and Matakaoa allochthons are 55-195 km and 115-530 km respectively, depending on whether the Te Rata allochthon originally lay in front of the original position of the Waitahaia allochthon or was originally the upper part of the Waitahaia allochthon, and on the amounts of internal shortening of the allochthons. Over the = 6 m.y. period of thrusting, these estimates imply displacement rates for the Matakaoa sheet of 19-88 mm/yr. The average plate convergence rate at East Cape for the period 36-20 Ma is estimated at 25-30 mm/yr; the rate for the Early Miocene-- when subduction was active--may have been faster. Reasonable displacement rates for the Matakaoa sheet would result if the Te Rata allochthon was originally the upper part of the Waitahaia allochthon and if both allochthons have been shortened somewhat less than 50%. The emplacement mechanism of the Matakaoa ophiolite is elucidated by comparison with Northland, northwest along strike from Raukumara Peninsula, onto which correlative rocks were emplaced at the same time. The thinness of the Northland ophiolite bodies, their composition of rocks typical of the uppermost levels of oceanic crust, and the start of andesitic volcanism accompanying their obduction show that they were emplaced as a thin flake of oceanic crust which peeled off the downgoing slab during the inception of southwestward subduction. The reason the ophiolites were initially peeled from the slab is probably that their upper levels prograded southwestward over sediments of the Northland-Raukumara continental margin. In such a situation, initial compression would have led to formation of a northeast-dipping thrust at the volcanic/sediment interface; this thrust would then have propagated back into the downgoing plate with continued convergence, allowing the ophiolites to climb up the continental slope pushing the allochthonous sedimentary sheets ahead of them.</p>


2020 ◽  
Vol 123 (4) ◽  
pp. 655-668
Author(s):  
N. Lenhardt ◽  
W. Altermann ◽  
F. Humbert ◽  
M. de Kock

Abstract The Palaeoproterozoic Hekpoort Formation of the Pretoria Group is a lava-dominated unit that has a basin-wide extent throughout the Transvaal sub-basin of South Africa. Additional correlative units may be present in the Kanye sub-basin of Botswana. The key characteristic of the formation is its general geochemical uniformity. Volcaniclastic and other sedimentary rocks are relatively rare throughout the succession but may be dominant in some locations. Hekpoort Formation outcrops are sporadic throughout the basin and mostly occur in the form of gentle hills and valleys, mainly encircling Archaean domes and the Palaeoproterozoic Bushveld Complex (BC). The unit is exposed in the western Pretoria Group basin, sitting unconformably either on the Timeball Hill Formation or Boshoek Formation, which is lenticular there, and on top of the Boshoek Formation in the east of the basin. The unit is unconformably overlain by the Dwaalheuwel Formation. The type-locality for the Hekpoort Formation is the Hekpoort farm (504 IQ Hekpoort), ca. 60 km to the west-southwest of Pretoria. However, no stratotype has ever been proposed. A lectostratotype, i.e., the Mooikloof area in Pretoria East, that can be enhanced by two reference stratotypes are proposed herein. The Hekpoort Formation was deposited in a cratonic subaerial setting, forming a large igneous province (LIP) in which short-termed localised ponds and small braided river systems existed. It therefore forms one of the major Palaeoproterozoic magmatic events on the Kaapvaal Craton.


Author(s):  
В. Зинько ◽  
V. Zin'ko ◽  
А. Зверев ◽  
A. Zverev ◽  
М. Федин ◽  
...  

The seismoacoustical investigations was made in the western part of the Kerch strait (Azov sea) near Kamysh-Burun spit. The fracture zone with dislocated sedimentary rocks layers and buried erosional surface was revealed to the west of spit. Three seismofacial units was revealed to the east of spit. The first unit was modern sedimentary cover. The second ones has cross-bedding features and was, probably, the part of early generation of Kamysh-Burun spit, which lied to the east of its modern position. The lower border of the second unit is the erosional surface supposed of phanagorian age. The third unit is screened by acoustic shedows in large part.


2019 ◽  
Vol 101 ◽  
pp. 322-333 ◽  
Author(s):  
David L. Vasconcelos ◽  
Francisco H.R. Bezerra ◽  
Ole R. Clausen ◽  
Walter E. Medeiros ◽  
David L. de Castro ◽  
...  

2017 ◽  
Vol 47 (1) ◽  
pp. 3-19
Author(s):  
João Gabriel Motta ◽  
Norberto Morales ◽  
Walter Malagutti Filho

ABSTRACT: The Brasília and Ribeira fold belts have been established in south-southwestern São Francisco Craton during the Brasiliano-Pan African orogeny (0.9-0.5 Ga - Tonian to Cambrian), and played an important role in West Gondwana continent assembly. The region is given by a complex regional fold and thrust belt superposed by shearing during the orogeny late times, with superposing stress fields forming a structural interference zone. These thrust sheets encompasses assemblies from lower- to upper-crust from different major tectonic blocks (Paranapanema, São Francisco), and newly created metamorphic rocks. Re-evaluation of ground gravity datasets in a geologically constrained approach including seismology (CRUST1 model) and magnetic data (EMAG2 model) unveiled details on the deep- crust settings, and the overall geometry of the structural interference zone. The Simple Bouguer Anomaly map shows heterogeneous density distribution in the area, highlighting the presence of high-density, high metamorphic grade rocks along the Alterosa suture zone in the Socorro-Guaxupé Nappe, lying amid a series of metasedimentary thrust scales in a regional nappe system with important verticalization along regional shear zones. Forward gravity modeling favors interpretations of structural interference up North into Guaxupé Nappe. Comparison to geotectonic models shows similarities with modern accretionary belts, renewing the discussion.


Sign in / Sign up

Export Citation Format

Share Document