Tectonic deformation and magmatism along the southern flank of the Maritimes Basin: the northeastern Cobequid Highlands, Nova Scotia

2001 ◽  
Vol 38 (1) ◽  
pp. 43-58 ◽  
Author(s):  
David JW Piper ◽  
Georgia Pe-Piper
Keyword(s):  
Hanging Wall ◽  
Early Carboniferous ◽  
Tectonic Deformation ◽  
Lower Paleozoic ◽  
Oblique Convergence ◽  
Half Graben ◽  
Maritimes Basin ◽  
Seismic Reflection Profiles ◽  
Paleozoic Rocks ◽  
Structural Levels

Distributed crustal-scale faulting in the Cobequid Highlands in the Middle Devonian to Carboniferous resulted from the oblique convergence of the Meguma and Avalon terranes. In the northeastern Cobequid Highlands, seismic reflection profiles show Neoproterozoic and lower Paleozoic rocks, together with enigmatic foliated rocks, overlying the Early Carboniferous Fountain Lake Group. The foliated rocks form the hanging wall of a north-vergent thrust fault. Their protolith is inferred from petrography and geochemistry to be principally Neoproterozoic rhyodacitic tuff and late Paleozoic hypabyssal intrusions. The age of thrusting is stratigraphically constrained to the late Tournaisian – mid-Viséan, and sericite from mylonite yielded a Tournaisian K–Ar age of 352 ± 8 Ma. The thrusting occurs at the base of a tectonic escape sheet and resulted from a restraining bend in the Rockland Brook master fault. Farther west, where the Rockland Brook fault trends almost east–west, Tournaisian extensional features include the Nuttby basin and widespread gabbro dykes, sills, and stocks. At deeper structural levels, granite plutons were intruded in a similar tectonic regime of thrusting and local extension by lateral movement of basement blocks. The emplacement process resulted from progressive widening of initial dykes, analogous to the dykes deformed in the thrust hanging wall. Regionally, in the Tournaisian of the southern Maritimes Basin half-graben formation was synchronous with pluton emplacement and thrusting in adjacent horsts.

Measurable impact of river incision on rift tectonics

2021 ◽  
Author(s):  
Jean-Arthur Olive ◽  
Luca Malatesta ◽  
Mark Behn ◽  
Roger Buck
Keyword(s):  
Numerical Simulations ◽  
Hanging Wall ◽  
Normal Fault ◽  
Climatic Conditions ◽  
Natural Variability ◽  
Surface Processes ◽  
Tectonic Deformation ◽  
Plate Boundaries ◽  
River Incision ◽  
Half Graben

<p>Models that couple tectonics and surface processes commonly predict that efficient erosion and sedimentation help focus crustal deformation onto fewer, longer-lived faults. However, because their geomorphic parameters are difficult to calibrate against real landscapes, the sensitivity of tectonic deformation to a realistic range of surface process efficiencies remains poorly known. Here we model the growth of structurally simple half-graben structures subjected to fluvial incision of specified efficiency and sedimentation. Numerical simulations predict that infinitely-efficient erosion and deposition (i.e., complete surface leveling) can more than double the maximum offset reached on a master normal fault before crustal strain localizes elsewhere. Further, leveling footwall relief tends to promote the migration of strain towards the hanging wall to form new grabens instead of horsts. </p><p>         To test whether the efficiency of river incision can vary sufficiently across real rifts to exert a control on tectonic styles, we analyze the profiles of rivers draining half-graben footwalls and horst blocks in the Basin & Range, Taupo, Rio Grande, and East African Rift. We adapt the standard methodology of equilibrium river profile analysis to account for spatial variations in uplift expected from crustal flexure in a fault-bounded block. Erosional efficiency (EE) is defined as the inverse of the (dimensionless) slope of uplift- and drainage area-corrected river elevation plots.  Measured EEs range between ~0.1 and ~4, reflecting natural variability in lithology, climate, and uplift rates across sites. Incorporating EEs within this documented range in numerical simulations, we find that increasing EE can increase the maximum throw on half-graben master faults by ~50%. Changing EE also affects the geometry of subsequent faults, with lower EEs favoring the transition from half-graben to horsts. These models predict that rifting in a colder, stronger continental crust is less sensitive to surface processes and requires even lower EE to develop horst structures. Our simulations are consistent with a compilation of EE, crustal strength proxies, and fault characteristics across real rift zones. These results suggest that natural variability in climatic conditions and surface erodibility has a measurable impact on the tectonic makeup of Earth's plate boundaries.</p>

Erosion rates of the New Zealand Southern Alps reflect long-term tectonics and transient climate

2021 ◽  
Author(s):  
Duna Roda-Boluda ◽  
Taylor Schildgen ◽  
Hella Wittmann-Oelze ◽  
Stefanie Tofelde ◽  
Aaron Bufe ◽  
...  
Keyword(s):  
New Zealand ◽  
Strike Slip ◽  
Southern Alps ◽  
Fault System ◽  
Tectonic Deformation ◽  
Seismic Cycle ◽  
Erosion Rates ◽  
Alpine Fault ◽  
Oblique Convergence

<p>The Southern Alps of New Zealand are the expression of the oblique convergence between the Pacific and Australian plates, which move at a relative velocity of nearly 40 mm/yr. This convergence is accommodated by the range-bounding Alpine Fault, with a strike-slip component of ~30-40 mm/yr, and a shortening component normal to the fault of ~8-10 mm/yr. While strike-slip rates seem to be fairly constant along the Alpine Fault, throw rates appear to vary considerably, and whether the locus of maximum exhumation is located near the fault, at the main drainage divide, or part-way between, is still debated. These uncertainties stem from very limited data characterizing vertical deformation rates along and across the Southern Alps. Thermochronology has constrained the Southern Alps exhumation history since the Miocene, but Quaternary exhumation is hard to resolve precisely due to the very high exhumation rates. Likewise, GPS surveys estimate a vertical uplift of ~5 mm/yr, but integrate only over ~10 yr timescales and are restricted to one transect across the range.</p><p>To obtain insights into the Quaternary distribution and rates of exhumation of the western Southern Alps, we use new <sup>10</sup>Be catchment-averaged erosion rates from 20 catchments along the western side of the range. Catchment-averaged erosion rates span an order of magnitude, between ~0.8 and >10 mm/yr, but we find that erosion rates of >10 mm/yr, a value often quoted in the literature as representative for the entire range, are very localized. Moreover, erosion rates decrease sharply north of the intersection with the Marlborough Fault System, suggesting substantial slip partitioning. These <sup>10</sup>Be catchment-averaged erosion rates integrate, on average, over the last ~300 yrs. Considering that the last earthquake on the Alpine Fault was in 1717, these rates are representative of inter-seismic erosion. Lake sedimentation rates and coseismic landslide modelling suggest that long-term (~10<sup>3</sup> yrs) erosion rates over a full seismic cycle could be ~40% greater than our inter-seismic erosion rates. If we assume steady state topography, such a scaling of our <sup>10</sup>Be erosion rate estimates can be used to estimate rock uplift rates in the Southern Alps. Finally, we find that erosion, and hence potentially exhumation, does not seem to be localized at a particular distance from the fault, as some tectonic and provenance studies have suggested. Instead, we find that superimposed on the primary tectonic control, there is an elevation/temperature control on erosion rates, which is probably transient and related to frost-cracking and glacial retreat.</p><p>Our results highlight the potential for <sup>10</sup>Be catchment-averaged erosion rates to provide insights into the magnitude and distribution of tectonic deformation rates, and the limitations that arise from transient erosion controls related to the seismic cycle and climate-modulated surface processes.</p><p> </p><p> </p>

scholarly journals Stretching and Contraction of Extensional Basins With Pre-Rift Salt: A Numerical Modeling Approach

2021 ◽  
Vol 9 ◽  
Author(s):  
Pablo Granado ◽  
Jonas B. Ruh ◽  
Pablo Santolaria ◽  
Philipp Strauss ◽  
Josep Anton Muñoz
Keyword(s):  
Hanging Wall ◽  
Structural Evolution ◽  
Extension Rate ◽  
Rift Basins ◽  
Basin Inversion ◽  
Accommodation Space ◽  
Basement Faults ◽  
Original Distribution ◽  
Thrust Belts ◽  
Half Graben

We present a series of 2D thermo-mechanical numerical experiments of thick-skinned crustal extension including a pre-rift salt horizon and subsequent thin-, thick-skinned, or mixed styles of convergence accompanied by surface processes. Extension localization along steep basement faults produces half-graben structures and leads to variations in the original distribution of pre-rift salt. Thick-skinned extension rate and salt rheology control hanging wall accommodation space as well as the locus and timing of minibasin grounding. Upon shortening, extension-related basement steps hinder forward propagation of evolving shallow thrust systems; conversely, if full basin inversion takes place along every individual fault, the regional salt layer is placed back to its pre-extensional configuration, constituting a regionally continuous décollement. Continued shortening and basement involvement deform the shallow fold-thrust structures and locally breaches the shallow décollement. We aim at obtaining a series of structural, stratigraphic and kinematic templates of fold-and-thrust belts involving rift basins with an intervening pre-rift salt horizon. Numerical results are compared to natural cases of salt-related inversion tectonics to better understand their structural evolution.

scholarly journals A missing link in the peri-Gondwanan terrane collage: the Precambrian basement of the Moroccan Meseta and its lower Paleozoic cover

2018 ◽  
Vol 55 (1) ◽  
pp. 33-51 ◽  
Author(s):  
Dominik Letsch ◽  
Mohamed El Houicha ◽  
Albrecht von Quadt ◽  
Wilfried Winkler
Keyword(s):  
Carbonate Platform ◽  
Source Area ◽  
Source Rocks ◽  
Lower Paleozoic ◽  
Northern Margin ◽  
Precambrian Geology ◽  
The North ◽  
Late Cambrian ◽  
Paleozoic Rocks ◽  
Rifted Margin

This article provides stratigraphic and geochronological data from a central part of Gondwana’s northern margin — the Moroccan Meseta Domain. This region, located to the north of the Anti-Atlas area with extensive outcrops of Precambrian and lower Paleozoic rocks, has hitherto not received much attention with regard to its Precambrian geology. Detrital and volcanic zircon ages have been used to constrain sedimentary depositional ages and crustal affinities of sedimentary source rocks in stratigraphic key sections. Based on this, a four-step paleotectonic evolution of the Meseta Domain from the Ediacaran until the Early Ordovician is proposed. This evolution documents the transition from a terrestrial volcanic setting during the Ediacaran to a short-lived carbonate platform setting during the early Cambrian. The latter then evolved into a rifted margin with deposition of thick siliciclastic successions in graben structures during the middle to late Cambrian. The detritus in these basins was of local origin, and a contribution from a broader source area (encompassing parts of the West African Craton) can only be demonstrated for postrifting, i.e., laterally extensive sandstone bodies that seal the former graben. In a broader paleotectonic context, it is suggested that this Cambrian rifting is linked to the opening of the Rheic Ocean, and that several peri-Gondwanan terranes (Meguma and Cadomia–Iberia) may have been close to the Meseta Domain before drifting, albeit some of them seem to have been constituted by a distinctly different basement.

Synrift evaporite deposition and structural characterization of the onshore Alagoas subbasin

2019 ◽  
Vol 7 (4) ◽  
pp. SH19-SH31
Author(s):  
Gabriela Salomão Martins ◽  
Webster Ueipass Mohriak ◽  
Nivaldo Destro
Keyword(s):  
Structural Characterization ◽  
Oil And Gas ◽  
Hanging Wall ◽  
Structural Evolution ◽  
Gas Production ◽  
North East ◽  
The North ◽  
Half Graben ◽  
Well Data

The Sergipe-Alagoas Basin, situated in the north-east Brazilian margin, has a long tradition of oil and gas production and the presence and distribution of evaporites play an important role in petroleum systems in the basin. However, little research has focused on the structural evolution of the older, synrift evaporitic sections of the basin. We have focused explicitly in the detailed subsurface structural characterization of the rift in the Alagoas subbasin and the distribution of the Early Aptian evaporites. To accomplish this objective, we interpreted selected 2D and 3D seismic and well data located in two areas known as the Varela Low (VL) and Fazenda Guindaste Low (FGL). We identified diverse deformation styles in those two basin depocenters. Our interpretation indicates that VL consists of a half-graben with a significant rollover structure, controlled by two listric northeast–southwest border faults. The deformation in the hanging wall is also accommodated by release faults and minor antithetic faults. In this depocenter, we mapped in the seismic and the well data an older evaporitic sequence within the Coqueiro Seco Fm., known as Horizonte Salt. This evaporitic section occurs in the internal part of the VL half graben, where it is limited by release and antithetic faults. Significant salt strata growing toward the antithetic fault is observed. Whereas, the FGL represents a graben elongated along the north-east direction and is controlled by several types of structures. We recognized normal synthetic and antithetic faults, transfer zones, release faults, and rollover anticlines in the seismic throughout this depocenter. We mapped an evaporitic section within the Maceió Fm., known as Paripueira Salt, which consists of disconnected salt bodies, restricted to the hanging walls of synrift faults.

Lower Paleozoic Rocks in Diatremes, Southern Wyoming and Northern Colorado

1969 ◽  
Vol 80 (1) ◽  
pp. 149 ◽  
Author(s):  
JOHN CHRONIC ◽  
MALCOLM E. McCALLUM ◽  
CLINTON S. FERRIS ◽  
DAVID H. EGGLER
Keyword(s):  
Lower Paleozoic ◽  
Northern Colorado ◽  
Paleozoic Rocks

The last pteraspids (Vertebrata, Heterostraci): new material from the Middle Devonian of Alberta and Idaho

2020 ◽  
Vol 94 (4) ◽  
pp. 758-772
Author(s):  
David K. Elliott ◽  
Linda S. Lassiter ◽  
Kathryn E. Geyer
Keyword(s):  
Middle Devonian ◽  
New Genus ◽  
New Combination ◽  
Additional Material ◽  
Lower Paleozoic ◽  
Early Devonian ◽  
Red Sandstone ◽  
Large Channel ◽  
New Material ◽  
Paleozoic Rocks

AbstractThis report documents the last pteraspids, (armored, jawless members of the Heterostraci), which are otherwise only known from the Early Devonian of the Old Red Sandstone Continent. Tuberculate pteraspid heterostracans are described from the Middle Devonian beds of two formations in western North America. The late Givetian Yahatinda Formation of Alberta and British Columbia consists of channels cut into lower Paleozoic rocks and represents deposition in marine to littoral environments. Clavulaspis finis (Elliott et al., 2000a) new combination is redescribed from additional material from the Yahatinda Formation and reassigned to the new genus Clavulaspis because the original genus name is invalid. The Eifelian Spring Mountain beds of Idaho consist of a large channel that represents a clastic-dominated estuarine environment. It contains Scutellaspis wilsoni new genus new species, and the previously described species from the Spring Mountain beds is redescribed and reassigned to Ecphymaspis new genus, which was prompted by new material and a review of the validity of the original genus name. Phylogenetic analysis shows that these three new taxa form part of the derived clade Protaspididae.UUID: http://zoobank.org/9cf09b21-cec1-4ce4-bc2b-658d0b515e10

Sign in / Sign up

Export Citation Format

Share Document