Tertiary extension in the central British Columbia Intermontane Belt: magnetic and paleomagnetic evidence from the Endako region

2001 ◽  
Vol 38 (4) ◽  
pp. 657-678 ◽  
Author(s):  
Carmel Lowe ◽  
Randolph J Enkin ◽  
Lambertus C Struik
Keyword(s):  
British Columbia ◽  
Strike Slip ◽  
Paleomagnetic Data ◽  
Magnetic Data ◽  
Euler Deconvolution ◽  
The West ◽  
Near Surface ◽  
Dextral Strike Slip Fault ◽  
Slip Displacement ◽  
Dextral Strike Slip

New magnetic and paleomagnetic data for central British Columbia support and quantify the hypothesis that the area underwent significant Tertiary-age transtensional deformation. Paleomagnetically determined tilts in Eocene rocks indicate that four fault-bounded pits, which constitute the Endako molybdenum mine, were displaced on a series of normal (probably listric) faults that have separations of less than a kilometre. The interpretation also suggests there can be little vertical offset on the Denak West Fault, which separates the Denak East and Denak West pits. Regional paleomagnetic data indicate a predominance of easterly directed tilts to the east of the Casey Fault, but to the west a large variation in the orientation and magnitude of tilts is observed. Results at one site proximal to the Casey Fault indicate a component of dip-slip displacement on this dominantly dextral strike-slip fault. Mapped northeast- and northwest-trending faults commonly correspond to linear zones of steep magnetic gradient and near-surface magnetic sources. Several additional northwest- and northeast-trending lineaments are imaged in the magnetic data where no faults are mapped (particularly over massive and lithologically homogeneous phases of the Endako batholith). Euler deconvolution solutions confirm most such lineaments are also associated with shallow magnetic sources. In profile, they have either a fault or dyke character and are interpreted to be unmapped faults, some locally intruded by mafic dykes, which cut the region into a series of fault-bounded blocks.

Structural evolution of basement gneisses and Hadrynian cover, Bulldog Creek area, Rocky Mountains, British Columbia

1988 ◽  
Vol 25 (10) ◽  
pp. 1687-1702 ◽  
Author(s):  
Michael R. McDonough ◽  
Philip S. Simony
Keyword(s):  
British Columbia ◽  
Structural Evolution ◽  
Rocky Mountain ◽  
Strike Slip ◽  
Normal Faulting ◽  
The West ◽  
Kinematic Indicators ◽  
Thrust Sheets ◽  
Dextral Strike Slip ◽  
Southern Rocky Mountain

Two gneiss bodies are contained in thrust sheets on the west edge of the Rocky Mountain Main Ranges near Valemount, British Columbia. The Bulldog Gneiss comprises Aphebian or older paragneiss and amphibolitic gneiss intruded by Aphebian orthogneiss sheets. The Yellowjacket Gneiss is granodioritic orthogneiss of unknown age. Both gneiss bodies are basement highs with thin Hadrynian metasediment cover sequences. The cover sequences are assigned to the lower Miette Group and are correlated with Horsethief Creek Group.Internal shortening of gneiss thrust sheets is expressed by recumbent folding and stacking of thin thrust sheets of gneiss and cover. The Bulldog Gneiss and its cover were carried on the postmetamorphic Purcell Thrust. The Yellowjacket Gneiss and its cover were carried on the pre- to synmetamorphic Bear Foot Thrust. Northeast and northwest displacement is documented on the moderately southwest-dipping Bear Foot Thrust, and a dextral oblique-slip – thrust model is proposed to explain the duality of thrust and dextral strike-slip kinematic indicators in mylonite from the fault. An estimate of shortening in the fore-land suggests that basement thrust sheets were translated more than 200 km to the northeast.Correlation of gneisses and cover with the westerly adjacent Malton Gneiss and its cover precludes major dextral strike-slip motion on the Southern Rocky Mountain Trench (SRMT) during and after thrusting. The SRMT was the locus of post-thrusting and postmetamorphic, Eocene(?), brittle, west-side-down, normal faulting.

Brittle faulting in the Thor–Odin culmination, Monashee complex, southern Canadian Cordillera: constraints on geometry and kinematics

2005 ◽  
Vol 42 (12) ◽  
pp. 2141-2160 ◽  
Author(s):  
Stefan Kruse ◽  
Paul F Williams
Keyword(s):  
Strike Slip ◽  
Normal Faults ◽  
Canadian Cordillera ◽  
The West ◽  
West Side ◽  
The North ◽  
Monashee Complex ◽  
Dextral Strike Slip Fault ◽  
Brittle Faulting ◽  
Dextral Strike Slip

Regionally recognized dextral strike-slip faulting is present in the Monashee complex of the southern Canadian Cordillera but is overprinted and partially obscured by subsequent extension. Eocene brittle faults and fractures within the Thor–Odin culmination of the Monashee complex are divisible into three distinct sets. Initial 340°–010° trending strike-slip faults (set 1) were locally overprinted and reactivated by normal faults with a 325°–020° trend (set 2). A third set of 255°–275° trending fractures (set 3) are interpreted as conjugates to set 1, reactivated as transfer faults to the set 2 normal faults. Large regional faults weather recessively, forming topographic lineaments that transect the Monashee complex. The Victor Creek Fault defines one such lineament. Detailed mapping within the northern Thor–Odin culmination reveals piercement points (fold hinges) on the east side of the fault that are not readily matched on the west side. The minimum displacement required on the Victor Creek Fault to down-drop the fold hinge below the level of exposure on the west side is 1370 m, assuming normal down-to-the-west displacement. The geometry of the fault is consistent with a set 1 dextral strike-slip fault, however. Matching the piercement points in the study area with possible equivalents to the north indicates 55–60 km of dextral strike-slip displacement.

scholarly journals The role of the 'Zvornik suture' for assessing the number of Neotethyan oceans: Surface - subsurface constraints on the fossil plate margin (Vardar Zone vs. Inner Dinarides)

2020 ◽  
Vol 81 (2) ◽  
pp. 63-86
Author(s):  
Darko Spahic ◽  
Tivadar Gaudenyi
Keyword(s):  
Oceanic Lithosphere ◽  
Ocean Model ◽  
Strike Slip ◽  
Fault System ◽  
The West ◽  
Vardar Zone ◽  
Slip Activity ◽  
Dextral Strike Slip Fault ◽  
Dextral Strike Slip

The balancing exercise of the ?single-ocean model? and reexa - mination of Jurassic paleogeographic conditions and tectonic interaction allowed the reconstruction of the mosaic of independent microplate margins and sutured northwestern Tethyan realm (Vardar Ocean). The overprinted Mesozoic convergent margin referred to as the ?Zvornik suture? was of special interest in the reconstruction of the displaced ophiolite belts of Dinarides and Vardar Zone. The surface?subsurface constraints of these mixed crustal units, in particular the polyphase strike-slip character of the ?Zvornik suture? yields the presence of at least two of Neotethyan basins extrapolated in the vicinity of the northwestern segment of this paleosuture - related fault system. The restoration and synopsis shows a limited capability for obduction-related emplacement of the Vardar oceanic lithosphere (West Vardar Zone) accounting the polyphased strike-slip tectonics. The balancing and the proposed tectonic/paleogeographic recon struction does not exclude obduction, but it shows a limited capability with much shorter across-strike width of the highlydeformed West Vardar ophio lite. The presence of the two distinct autochthonous Tethyan oceans divided by this important dextral strike-slip fault zone is suggested: The Inner Dina ric?(Mirdita?Pindos) Ocean or Dinaric Tethys (identified by the Inner Dinaric Ophiolite Belt) and the Vardar Ocean (identified by the West Vardar Zone). The West Vardar Zone remains to be a subzone of the principal composite Neotethyan suture referred to as the Vardar Zone s.s., whereas the Dinaric Tethys have been (re)incorporated to the area of Dinarides (Adria microplate). The northern segments of these two landlocked basins were on both sides of the Inner Dinaridic continental ridge (referred to as the Drina-Ivanjica block), divided by the protracted strike-slip activity of the ?Zvornik suture?.

Dextral strike-slip faulting in the Cariboo Mountains, British Columbia: a natural example of wrench tectonics in relation to Cordilleran tectonics

2002 ◽  
Vol 39 (6) ◽  
pp. 953-970 ◽  
Author(s):  
L F Reid ◽  
P S Simony ◽  
G M Ross
Keyword(s):  
British Columbia ◽  
Rocky Mountain ◽  
Strike Slip ◽  
Strike Slip Fault ◽  
Fault System ◽  
Fault Systems ◽  
Dextral Strike Slip Fault ◽  
Deformation Event ◽  
Step Over ◽  
Dextral Strike Slip

The Cariboo Mountains, British Columbia, contain an intracontinental dextral strike-slip fault system that crosscuts the regional fold structures. This fault system accounts for a minimum of 120 km and a maximum of 200 km of dextral strike-slip displacement. This probably accommodates some of the motion associated with the southern termination of the Northern Rocky Mountain Trench Fault and is part of a step-over zone between the Northern Rocky Mountain Trench Fault and the Fraser River – Straight Creek fault systems. The Isaac Lake Synclinorium is a kilometre-scale Jurassic fold structure that is bounded by the dextral oblique Isaac Lake and Winder strike-slip faults. These faults are part of the regional strike-slip fault system that is found throughout the Cariboo Mountains. Deformation associated with the strike-slip faults is complex and is partitioned into motion along the faults and into the formation of kilometre-scale folds that are found in areas between the faults. The angular relationship between the strike-slip faults and folds conforms to models developed for dextral strike-slip fault systems with drag on high-friction faults. We interpreted these structures to have formed during a continuous deformation event. Timing constraints indicate that faulting started by the Late Cretaceous and may have had a long and protracted history into the Tertiary.

scholarly journals Coseismic fault-slip distribution of the 2019 Ridgecrest Mw6.4 and Mw7.1 earthquakes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yang Gao ◽  
HuRong Duan ◽  
YongZhi Zhang ◽  
JiaYing Chen ◽  
HeTing Jian ◽  
...  
Keyword(s):  
Strike Slip ◽  
Fault Slip ◽  
Slip Distribution ◽  
Synthetic Aperture ◽  
Seismic Events ◽  
Interferometric Synthetic Aperture Radar ◽  
The Past ◽  
Dextral Strike Slip Fault ◽  
Fault Slip Distribution ◽  
Dextral Strike Slip

AbstractThe 2019 Ridgecrest, California seismic sequence, including an Mw6.4 foreshock and Mw7.1 mainshock, represent the largest regional seismic events within the past 20 years. To obtain accurate coseismic fault-slip distribution, we used precise positioning data of small earthquakes from January 2019 to October 2020 to determine the dip parameters of the eight fault geometry, and used the Interferometric Synthetic Aperture Radar (InSAR) data processed by Xu et al. (Seismol Res Lett 91(4):1979–1985, 2020) at UCSD to constrain inversion of the fault-slip distribution of both earthquakes. The results showed that all faults were sinistral strike-slips with minor dip-slip components, exception for dextral strike-slip fault F2. Fault-slip mainly occurred at depths of 0–12 km, with a maximum slip of 3.0 m. The F1 fault contained two slip peaks located at 2 km of fault S4 and 6 km of fault S5 depth, the latter being located directly above the Mw7.1hypocenter. Two slip peaks with maximum slip of 1.5 m located 8 and 20 km from the SW endpoint of the F2 fault were also identified, and the latter corresponds to the Mw6.4 earthquake. We also analyzed the influence of different inversion parameters on the fault slip distribution, and found that the slip momentum smoothing condition was more suitable for the inversion of the earthquakes slip distribution than the stress-drop smoothing condition.

scholarly journals Structural analysis of S-wave seismics around an urban sinkhole; evidence of enhanced subrosion in a strike-slip fault zone

2017 ◽  
Author(s):  
Sonja H. Wadas ◽  
David C. Tanner ◽  
Ulrich Polom ◽  
Charlotte M. Krawczyk
Keyword(s):  
Strike Slip ◽  
Strike Slip Fault ◽  
Key Factors ◽  
S Wave ◽  
Seismic Profiles ◽  
Reflection Seismic ◽  
Dextral Strike Slip Fault ◽  
Seismic Sections ◽  
The Town ◽  
Dextral Strike Slip

Abstract. In November 2010, a large sinkhole opened up in the urban area of Schmalkalden, Germany. To determine the key factors which benefited the development of this collapse structure and therefore the subrosion, we carried out several shear wave reflection seismic profiles around the sinkhole. In the seismic sections we see evidence of the Mesozoic tectonic movement, in the form of a NW–SE striking, dextral strike-slip fault, known as the Heßleser Fault, which faulted and fractured the subsurface below the town. The strike-slip faulting created a zone of small blocks (

scholarly journals First evidence of active transpressive surface faulting at the front of the eastern Southern Alps, northeastern Italy. Insight on the 1511 earthquake seismotectonics

2018 ◽  
Author(s):  
Emanuela Falcucci ◽  
Maria Eliana Poli ◽  
Fabrizio Galadini ◽  
Giancarlo Scardia ◽  
Giovanni Paiero ◽  
...  
Keyword(s):  
Strike Slip ◽  
Southern Alps ◽  
Strike Slip Fault ◽  
Fault System ◽  
The Past ◽  
Fold And Thrust Belt ◽  
Northeastern Italy ◽  
Dextral Strike Slip Fault ◽  
Seismic Lines ◽  
Dextral Strike Slip

Abstract. We investigated the eastern corner of northeastern Italy, where the NW-SE trending dextral strike-slip fault systems of western Slovenia intersects the south-verging fold and thrust belt of the eastern Southern Alps . The area suffered the largest earthquakes of the region, among which are the 1511 (Mw 6.3) event and the two major shocks of the 1976 seismic sequence, with Mw = 6.4 and 6.1 respectively. The Colle Villano thrust and the Borgo Faris-Cividale strike-slip fault have been first analyzed by interpreting industrial seismic lines and then by performing morpho-tectonic and paleoseismological analyses. These different datasets indicate that the two structures define an active, coherent transpressive fault system that activated twice in the past two millennia, with the last event occurring around the 15th–17th century. The chronological information, and the location of the investigated fault system suggest its activation during the 1511 earthquake.

Structural geology of the Lardeau Group near Trout Lake, British Columbia: implications for the structural evolution of the Kootenay Arc

1992 ◽  
Vol 29 (6) ◽  
pp. 1305-1319 ◽  
Author(s):  
Moira T. Smith ◽  
George E. Gehrels
Keyword(s):  
British Columbia ◽  
Shear Zone ◽  
Structural Evolution ◽  
Strike Slip ◽  
Ductile Deformation ◽  
Lower Paleozoic ◽  
Trout Lake ◽  
Facies Metamorphism ◽  
Dextral Strike Slip ◽  
Greenschist Facies Metamorphism

The Lardeau Group is a heterogeneous assemblage of lower Paleozoic eugeoclinal strata present in the Kootenay Arc in southeastern British Columbia. It is in fault contact with lower Paleozoic miogeoclinal strata for all or some of its length along a structure termed the Lardeau shear zone. The Lardeau Group was deformed prior to mid-Mississippian time, as manifested by layer-parallel faults, folds, and evidence for early greenschist-facies metamorphism. Regional constraints indicate probable Devono-Mississippian timing of orogeny, and possible juxtaposition of the Lardeau Group over miogeoclinal strata along the Lardeau shear zone at this time. Further ductile deformation during the Middle Jurassic Columbian orogeny produced large folds with subhorizontal axes, northwest-striking foliation and faults, and orogen-parallel stretching lineations. This deformation was apparently not everywhere synchronous, and may have continued through Late Jurassic time northeast of Trout Lake. This was followed by Cretaceous(?) dextral strike-slip and normal movement on the Lardeau shear zone and other parallel faults. While apparently the locus of several episodes of faulting, the Lardeau shear zone does not record the accretion of far-travelled tectonic fragments, as sedimentological evidence ties the Lardeau Group and other outboard units to the craton.

scholarly journals Structural Overview and Morphotectonic Evolution of a Strike-Slip Fault in the Zone of North Almora Thrust, Central Kumaun Himalaya, India

2016 ◽  
Vol 2016 ◽  
pp. 1-16 ◽  
Author(s):  
Lalit M. Joshi ◽  
Pitamber D. Pant ◽  
Bahadur S. Kotlia ◽  
Girish C. Kothyari ◽  
Khayingshing Luirei ◽  
...  
Keyword(s):  
Shear Zone ◽  
Strike Slip ◽  
Strike Slip Fault ◽  
Asymmetry Factor ◽  
Base Line ◽  
Gradient Index ◽  
River Channels ◽  
Fluvial Terraces ◽  
Dextral Strike Slip Fault ◽  
Dextral Strike Slip

The aim of the present research is to provide the base line details of the NNW-SSE trending Raintoli fault (RF) which is running parallel to the North Almora Thrust (NAT) along the Saryu valley from Seraghat-Naichun to Seri in the central sector of the Uttarakhand Himalaya, India. The RF is characterized as dextral strike slip fault and behaves as a ductile shear zone within the zone of NAT. The dextral sense of shear movement of RF is delineated by the fabric of the shear zone rocks including microscopically observed indicators such as sigma and delta porphyroclasts, quartz c-axis, and the field structural data. Additionally, in the quaternary period the dextral strike slip fault is reactivated with oblique slip component as characterized by various geomorphic indicators, for example, triangular facets, abandoned river channels, unpaired fluvial terraces, and V-shaped valleys with recurrent seismicity. Further, the morphometric parameters including Valley Floor Width to Valley Height (Vf), asymmetry factor (AF), and gradient index (GI) further prove active nature of RF as suggested by low values of hypsometric integration, V-shaped valley, higher gradient index, and tilting of Saryu basin.

Sign in / Sign up

Export Citation Format

Share Document