scholarly journals Evidence for voluminous bimodal pyroclastic volcanism during rifting of a Paleoproterozoic arc at Snow Lake, Manitoba

2017 ◽  
Vol 54 (6) ◽  
pp. 654-676 ◽  
Author(s):  
Kate E. Rubingh ◽  
Harold L. Gibson ◽  
Bruno Lafrance

The thrust-bounded McLeod Road – Birch Lake (MB) sequence occurs within the Paleoproterozoic Snow Lake arc (SLA) assemblage of the Flin Flon belt. Stratigraphic correlation of volcanic strata of the MB sequence with strata of the thrust-bounded Chisel sequence indicates that distinctive, submarine, eruption-fed, pyroclastic flow deposits are more extensive and voluminous than previously recognized (>10 km3). These voluminous felsic pyroclastic deposits define a distinct magmatic and explosive volcanic event during bimodal volcanism that accompanied rifting of the SLA. The felsic pyroclastic deposits define the remnants of a basin, or of nested basins, that formed during arc rifting and subsidence, and their eruption immediately preceded formation of the Chisel sequence volcanogenic massive sulfide (VMS) deposits. Although the Chisel sequence ore interval is recognized in the MB sequence, the lack of VMS-related alteration indicates that VMS hydrothermal activity was restricted to the Chisel portion of the basin. However, the MB sequence is host to the younger Snow Lake gold mine, a 1.4M oz (43 699 kg) gold producer. The overlying MORB-like Birch Lake basalts, if conformable with the MB sequence, may represent a progression from a rifted-arc to a back-arc setting. However, if they are thrust fault bounded, then they may represent the initial phases of arc-rifting, prior to the voluminous felsic pyroclastic eruptions. Correlation and integrity of stratigraphy between the thrust-bounded MB and SLA sequences indicates that the bounding thrust faults, which developed during accretionary processes, have less regional significance than previously interpreted.

Minerals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 85
Author(s):  
Mónica Arias ◽  
Pablo Nuñez ◽  
Daniel Arias ◽  
Pablo Gumiel ◽  
Cesar Castañón ◽  
...  

The Touro volcanogenic massive sulfide (VMS) deposit is located in the NW of the Iberian Variscan massif in the Galicia-Trás-os-Montes Zone, an amalgamation of several allochthonous terrains. The Órdenes complex is the most extensive of the allochthone complexes, and amphibolites and paragneisses host the deposit, characterized as being massive or semimassive (stringers) sulfides, mostly made up of pyrrhotite and chalcopyrite. The total resources are 103 Mt, containing 0.41% copper. A 3D model of the different orebodies and host rocks was generated using data from 1090 drill core logs. The model revealed that the structure of the area is a N–S-trending antiform. The orebodies crop out in the limbs and in the hinge zone. The mineralized structures are mostly tabular, up to 100 m in thickness and subhorizontal. Based on the petrography, geochemistry and the 3D model, the Touro deposit is classified as a VMS of the mafic-siliciclastic type formed in an Ordovician back-arc setting, which was buried and metamorphosed in Middle Devonian.


2021 ◽  
Author(s):  
◽  
Jacob Leath

<p>The southern Kermadec Arc – Havre Trough (SKAHT) is an intra-oceanic arc – back-arc system where the Pacific plate is subducting beneath the Australian plate. The Kermadec volcanic arc front consists of 33 volcanic centres, four of which host hydrothermal mineralization (Brothers, Haungaroa, Rumble II West, and Clark) such as volcanogenic massive sulfide (VMS) deposits, which are characterised by high concentrations of base and precious metals (e.g., Au, Cu, Zn, Pb). The sources of these metals are strongly tied to the metal contents within underlying magmatic rocks and associated magmatic systems with which the hydrothermal fluids interact. Understanding the sources, movements, and accumulation of metals associated with porphyry copper and exhalative base metal deposits within a subduction – arc setting remains limited.  This study reports major, trace, and volatile element contents in basaltic groundmass glasses and olivine-hosted melt inclusions from lavas from four locations within the arc – back-arc setting of the SKAHT. The focus is on understanding the controls on base metal (Pb, Cu, Zn, Mo, V) contents in the magmas. The sample locations, Rumble III and Rumble II West volcanoes, and back-arc Basins D and I, form an arc-perpendicular transect extending from arc front into the back-arc. The analysed melt inclusion and groundmass glasses are all basalt to basaltic andesite in composition, with back-arc basin samples more mafic than arc front volcano samples. The magmatic evolution of the melts is primarily controlled by crystal fractionation of olivine + pyroxene + plagioclase. All glasses have undergone variable degassing, indicated by an absence of detectable CO₂ and curvilinear decreases in S contents with increasing SiO₂. Of the volatile phases analysed, only Cl appears unaffected by degassing.  Distinct compositional differences are apparent between arc front and back-arc melts. The arc front magmas formed from higher degrees of melting of a less fertile mantle source and are more enriched in trace elements then the back-arc magmas due to greater additions of slab-derived aqueous fluids to their source. Magmas from a single arc front volcano (Rumble II West) incorporate melts that have tapped variably enriched sources, indicating heterogeneity of the mantle at small scales. Significant variation in mantle composition, however, is also apparent laterally along strike of the arc. Rumble III volcano and Basin I lie on an arc-perpendicular transect south of Rumble II West volcano and Basin D. Their greater enrichment in trace elements and higher concentrations of base metals than Rumble II West and Basin D lavas can be attributed to higher fluxes of subduction derived components.  Base metals (Cu, Zn, Pb, Mo, and V) are variably enriched in the SKAHT melts compared with typical mid-ocean ridge basalts with relative enrichments in the order Pb >> Cu > Mo, V > Zn. All metals appear to be affected by mantle metasomatism related to slab-derived fluids, either directly from slab components introduced to the mantle source (e.g., Pb) or through mobilisation of metals within the ambient mantle wedge. The apparently compatible behaviour of Zn, Cu, and V in the mantle means that these elements may be enriched in arc front magmas relative to back-arc magmas by higher degrees of partial melting and/or melting of more depleted sources.  All base metals behave incompatibly in the magma during crystal fractionation between 48 – 56 wt.% SiO₂. Lead and Cu concentrations, however, begin to level out from ~ 52 wt.% SiO₂ suggesting some subsequent loss to fractionating volatile phases as metal sulfide complexes. Rumble III samples show a decrease in metal concentration (Pb, Cu, V), from melt inclusions to groundmass glasses, suggestive of more significant loss associated with sulfur degassing.  Although other factors such as heat generation, hydrothermal flow, fault systems, and magma venting are key in the development of VMS deposits, this study shows that variations in subduction parameters can significantly affect metal concentrations in arc magmas that may host hydrothermal systems, and hence the amount of metals available to be scavenged into the deposits.</p>


Minerals ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 6
Author(s):  
Nicholas Moleski ◽  
Anthony Boxleiter ◽  
Joyashish Thakurta

The Paleoproterozoic (~1.8 Ga) Penokean Volcanic Belt (PVB) in the Great Lakes Region of North America hosts several polymetallic volcanogenic massive sulfide (VMS) deposits. These deposits were formed by back-arc extensional volcanism during the accretion of island-arc terranes along the southern margin of the Archean Superior Craton. This study reports δ34S values obtained from sulfide minerals collected from eight VMS deposits in the PVB: Back Forty, Bend, Eisenbrey, Flambeau, Horseshoe, Lynne, Reef, and Schoolhouse. The average δ34S values from most of these deposits lie within the mantle-range between −2 and 2‰, relative to Vienna Canyon Diablo Troilite (V-CDT). Average δ34S values from Back Forty and Lynne deposits are slightly higher, at 2.5 and 2.4‰, respectively. No systematic variation in δ34S was observed based on factors such as the kind of sulfide mineral, ore-texture, type of host rock, or the nature of host-rock alteration. The narrow observed range from the PVB offers a clear indication that sulfur in the mineralizing fluid, originated predominantly from a magmatic source. If there was a significant contribution of sulfur from seawater, the δ34S of seawater sulfur must also have been close to the mantle range. Slightly higher values from Back Forty and Lynne indicate minor involvement of oxidized sulfur at shallow water levels, possibly derived from the continental margin.


2020 ◽  
Vol 35 (2) ◽  
Author(s):  
Noor CD Aryanto ◽  
Hananto Kurnio

The bathymetry, petrology, marine magnetic, and seismic-SBP data have identified the northwest-southeast direction submarine ridge that shows hydrothermal activity. This activity occurred through Mount Baruna Komba, Abang Komba, and Ibu Komba. The volcanic rocks are andesite basaltic lava flows, tuff, and pumice. The andesite basaltic lava shows porphyritic, intergranular, intersertal to glomeroporphyritic textures. The rock composes anhedral minerals of k-feldspar, plagioclase, and pyroxene. These minerals present in small-sized, short prismatic dispersed in very fine groundmass minerals or glasses. Most of the volcanic rocks have experienced various degrees of alteration. The k-feldspar and plagioclase are most dominantly transformed into sericite, clay mineral, carbonate, epidote and oxide mineral, opaque mineral, and secondary plagioclase through the albitization process, while pyroxene replaced by chlorite. Other minerals are biotite and quartz, and base metals are present Cu, Zn, Ag, As, Pb, and gold. Mineralization categorizes as the phyllic zone, sub-prophylithic zone, and phyllic-potassic zone that formed at a temperature range of 250-400oC. The submarine hydrothermal alteration in the Komba Ridge is associated with a volcanogenic sulphide deposit controlled by crust thinning due to the crust rifts in the back-arc tectonic setting.


1999 ◽  
Vol 36 (2) ◽  
pp. 227-250 ◽  
Author(s):  
Joseph B Whalen ◽  
Eric C Syme ◽  
Richard A Stern

Granitoid magmatism spans three Flin Flon Belt evolutionary stages: (i) "evolved" arc (~1920 Ma) plus early juvenile arc (1904-1880 Ma) plutonism during intraoceanic arc-back-arc formation; (ii) early (1878-1860 Ma) and middle (1860-1844 Ma) successor arc plutonism following accretion and successor arc(s) development and; (iii) late (1843-1826 Ma) successor arc plutonism accompanying successor basin formation and waning arc magmatism. Amphibole-bearing mineralogy, metaluminous compositions, and igneous microgranitoid enclaves indicate derivation from infracrustal sources. Predominance of intermediate calc-alkaline compositions and negative Nb anomalies on normalized patterns over a 46-77 wt.% silica range indicate an arc setting. Basaltic end members indicate important contributions directly from the mantle. εNd(T) values are predominately in the range 0 to +4.3, reflecting mixing between depleted mantle melts and an Archean crustal component preserved in evolved arc plutons (-3.9 to -6). Temporal variations include the following: (i) early juvenile arc plutons are low K, high field strength element (HFSE) depleted, with relatively flat rare earth element (REE) patterns and negative Eu anomalies, indicative of low-pressure partial melting - fractionation in the mantle wedge, with residual pyroxene and plagioclase; (ii) early and middle successor arc plutonism is medium K, with steep REE patterns and no Eu anomalies, indicative of input from melting of basaltic sources (likely subducted back-arc oceanic crust) under high-pressure conditions with residual garnet and (or) amphibole and no plagioclase; (iii) late successor arc plutons are high K, more HFSE enriched, with both variable REE pattern slopes and Eu anomalies, indicative of a significant petrogenetic role of recycling of preexisting juvenile arc - accretionary complex crust.


2021 ◽  
Author(s):  
◽  
Jacob Leath

<p>The southern Kermadec Arc – Havre Trough (SKAHT) is an intra-oceanic arc – back-arc system where the Pacific plate is subducting beneath the Australian plate. The Kermadec volcanic arc front consists of 33 volcanic centres, four of which host hydrothermal mineralization (Brothers, Haungaroa, Rumble II West, and Clark) such as volcanogenic massive sulfide (VMS) deposits, which are characterised by high concentrations of base and precious metals (e.g., Au, Cu, Zn, Pb). The sources of these metals are strongly tied to the metal contents within underlying magmatic rocks and associated magmatic systems with which the hydrothermal fluids interact. Understanding the sources, movements, and accumulation of metals associated with porphyry copper and exhalative base metal deposits within a subduction – arc setting remains limited.  This study reports major, trace, and volatile element contents in basaltic groundmass glasses and olivine-hosted melt inclusions from lavas from four locations within the arc – back-arc setting of the SKAHT. The focus is on understanding the controls on base metal (Pb, Cu, Zn, Mo, V) contents in the magmas. The sample locations, Rumble III and Rumble II West volcanoes, and back-arc Basins D and I, form an arc-perpendicular transect extending from arc front into the back-arc. The analysed melt inclusion and groundmass glasses are all basalt to basaltic andesite in composition, with back-arc basin samples more mafic than arc front volcano samples. The magmatic evolution of the melts is primarily controlled by crystal fractionation of olivine + pyroxene + plagioclase. All glasses have undergone variable degassing, indicated by an absence of detectable CO₂ and curvilinear decreases in S contents with increasing SiO₂. Of the volatile phases analysed, only Cl appears unaffected by degassing.  Distinct compositional differences are apparent between arc front and back-arc melts. The arc front magmas formed from higher degrees of melting of a less fertile mantle source and are more enriched in trace elements then the back-arc magmas due to greater additions of slab-derived aqueous fluids to their source. Magmas from a single arc front volcano (Rumble II West) incorporate melts that have tapped variably enriched sources, indicating heterogeneity of the mantle at small scales. Significant variation in mantle composition, however, is also apparent laterally along strike of the arc. Rumble III volcano and Basin I lie on an arc-perpendicular transect south of Rumble II West volcano and Basin D. Their greater enrichment in trace elements and higher concentrations of base metals than Rumble II West and Basin D lavas can be attributed to higher fluxes of subduction derived components.  Base metals (Cu, Zn, Pb, Mo, and V) are variably enriched in the SKAHT melts compared with typical mid-ocean ridge basalts with relative enrichments in the order Pb >> Cu > Mo, V > Zn. All metals appear to be affected by mantle metasomatism related to slab-derived fluids, either directly from slab components introduced to the mantle source (e.g., Pb) or through mobilisation of metals within the ambient mantle wedge. The apparently compatible behaviour of Zn, Cu, and V in the mantle means that these elements may be enriched in arc front magmas relative to back-arc magmas by higher degrees of partial melting and/or melting of more depleted sources.  All base metals behave incompatibly in the magma during crystal fractionation between 48 – 56 wt.% SiO₂. Lead and Cu concentrations, however, begin to level out from ~ 52 wt.% SiO₂ suggesting some subsequent loss to fractionating volatile phases as metal sulfide complexes. Rumble III samples show a decrease in metal concentration (Pb, Cu, V), from melt inclusions to groundmass glasses, suggestive of more significant loss associated with sulfur degassing.  Although other factors such as heat generation, hydrothermal flow, fault systems, and magma venting are key in the development of VMS deposits, this study shows that variations in subduction parameters can significantly affect metal concentrations in arc magmas that may host hydrothermal systems, and hence the amount of metals available to be scavenged into the deposits.</p>


1999 ◽  
Vol 36 (11) ◽  
pp. 1767-1788 ◽  
Author(s):  
E C Syme ◽  
S B Lucas ◽  
A H Bailes ◽  
R A Stern

The Flin Flon Belt (Trans-Hudson Orogen, Manitoba and Saskatchewan) is the largest Paleoproterozoic volcanic-hosted massive sulphide (VMS) district in the world, with 118.7 million tonnes (Mt) of Zn-Cu-(Au-Ag) sulphide ore in 25 past or presently producing mines and 64.3 Mt in subeconomic deposits. The orebodies are restricted to isotopically juvenile volcanic-arc sequences, dated at 1.903-1.881 Ga at Flin Flon. Sequences of ca. 1.904-1.901 Ga back-arc and ocean-plateau basalts and related plutonic rocks, structurally juxtaposed with the arc assemblages at 1.880-1.870 Ga, are not known to contain economic base metal deposits. The juvenile arc tectono-stratigraphic assemblages are generally marked by older and stratigraphically lower tholeiitic submarine volcanic packages (ca. 1.903-1.886 Ga) that are observed or interpreted to be overlain by extensive and lithologically varied sequences of calc-alkaline and alkaline (shoshonitic) arc rocks and arc rift deposits (ca. 1.888-1.881 Ga). VMS deposits occur in both the tholeiitic and calc-alkaline arc sequences, but the 62 Mt Flin Flon deposit occurs in a 1.903 Ga tholeiitic primitive arc package. It can be demonstrated that for the Flin Flon - Callinan - Triple 7, Cuprus, and White Lake VMS deposits, whose stratigraphic context is preserved, deposition of the massive sulphides was temporally associated with inferred arc rifting processes. Critical observations for arc rifting include evidence for extensional faulting, erosion, and development of unconformities; extrusion of MORB-like basalts and associated rhyolites; and development of depositional basins with thick sequences of shoshonitic turbidites. As has been proposed for other major VMS camps (e.g., Kuroko, Kidd Creek, Bathurst), arc rifting can generate the loci of sustained high heat flow and fluid pathways required for the development of long-lived hydrothermal convection systems.


Author(s):  
Henrik Rasmussen ◽  
Lars Frimodt Pedersen

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Rasmussen, H., & Frimodt Pedersen, L. (1999). Stratigraphy, structure and geochemistry of Archaean supracrustal rocks from Oqaatsut and Naajaat Qaqqaat, north-east Disko Bugt, West Greenland. Geology of Greenland Survey Bulletin, 181, 65-78. https://doi.org/10.34194/ggub.v181.5114 _______________ Two Archaean supracrustal sequences in the area north-east of Disko Bugt, c. 1950 and c. 800 m in thickness, are dominated by pelitic and semipelitic mica schists, interlayered with basic metavolcanic rocks. A polymict conglomerate occurs locally at the base of one of the sequences. One of the supracrustal sequences has undergone four phases of deformation; the other three phases. In both sequences an early phase, now represented by isoclinal folds, was followed by north-west-directed thrusting. A penetrative deformation represented by upright to steeply inclined folds is only recognised in one of the sequences. Steep, brittle N–S and NW–SE striking faults transect all rock units including late stage dolerites and lamprophyres. Investigation of major- and trace-element geochemistry based on discrimination diagrams for tectonic setting suggests that both metasediments and metavolcanic rocks were deposited in an environment similar to a modern back-arc setting.


Sign in / Sign up

Export Citation Format

Share Document