Quality of floating car data (FCD) as a surrogate measure for urban arterial speed

2019 ◽  
Vol 46 (12) ◽  
pp. 1187-1198
Author(s):  
Oruc Altintasi ◽  
Hediye Tuydes-Yaman ◽  
Kagan Tuncay
Keyword(s):  
Ground Truth ◽  
Traffic Monitoring ◽  
Transformation Function ◽  
Urban Traffic ◽  
Traffic Data ◽  
Floating Car Data ◽  
Nonlinear Relation ◽  
Data Source ◽  
Surrogate Measure ◽  
Urban Corridor

Commercial floating car data (FCD) is being increasingly used as a traffic data source due to its lower cost despite concerns about its reliability. This paper focuses on the evaluation of FCD speed quality as a surrogate measure for arterial speed from different aspects. First, FCD speed is compared to video-based traffic data, collected from a specific urban road segment and assumed as ground truth in (a) descriptive evaluations, (b) speed estimation, and (c) level of service estimation. Regression analysis carried out to derive transformation function between two datasets showed a nonlinear relation with a high correlation coefficient of 0.82. Working with data along an urban corridor of 3.6 km also showed that despite some outliers, FCD was capable of detecting peak-hour queue formations as well as incident related ones. Use of transformation function on FCD speeds helped to increase its potential in urban traffic monitoring.

scholarly journals GIS-BASED ROUTE FINDING USING ANT COLONY OPTIMIZATION AND URBAN TRAFFIC DATA FROM DIFFERENT SOURCES

2015 ◽  
Vol XL-1-W5 ◽  
pp. 129-133 ◽  
Author(s):  
M. Davoodi ◽  
M. S. Mesgari
Keyword(s):  
Ant Colony Optimization ◽  
Road Network ◽  
Urban Traffic ◽  
Ant Colony ◽  
Traffic Data ◽  
Multiple Sources ◽  
Urban Road ◽  
Floating Car Data ◽  
Route Finding ◽  
Different Sources

Nowadays traffic data is obtained from multiple sources including GPS, Video Vehicle Detectors (VVD), Automatic Number Plate Recognition (ANPR), Floating Car Data (FCD), VANETs, etc. All such data can be used for route finding. This paper proposes a model for finding the optimum route based on the integration of traffic data from different sources. Ant Colony Optimization is applied in this paper because the concept of this method (movement of ants in a network) is similar to urban road network and movements of cars. The results indicate that this model is capable of incorporating data from different sources, which may even be inconsistent.

Short-term forecast model of taxi demand based on time and space heterogeneity

2021 ◽  
pp. 1-12
Author(s):  
Zhiyu Yan ◽  
Shuang Lv
Keyword(s):  
New York ◽  
New York City ◽  
York City ◽  
Urban Traffic ◽  
Percentage Error ◽  
Density Level ◽  
Traffic Data ◽  
Short Term ◽  
Time And Space ◽  
Density Data

Accurate prediction of traffic flow is of great significance for alleviating urban traffic congestions. Most previous studies used historical traffic data, in which only one model or algorithm was adopted by the whole prediction space and the differences in various regions were ignored. In this context, based on time and space heterogeneity, a Classification and Regression Trees-K-Nearest Neighbor (CART-KNN) Hybrid Prediction model was proposed to predict short-term taxi demand. Firstly, a concentric partitioning method was applied to divide the test area into discrete small areas according to its boarding density level. Then the CART model was used to divide the dataset of each area according to its temporal characteristics, and KNN was established for each subset by using the corresponding boarding density data to estimate the parameters of the KNN model. Finally, the proposed method was tested on the New York City Taxi and Limousine Commission (TLC) data, and the traditional KNN model, backpropagation (BP) neural network, long-short term memory model (LSTM) were used to compare with the proposed CART-KNN model. The selected models were used to predict the demand for taxis in New York City, and the Kriging Interpolation was used to obtain all the regional predictions. From the results, it can be suggested that the proposed CART-KNN model performed better than other general models by showing smaller mean absolute percentage error (MAPE) and root mean square error (RMSE) value. The improvement of prediction accuracy of CART-KNN model is helpful to understand the regional demand pattern to partition the boarding density data from the time and space dimensions. The partition method can be extended into many models using traffic data.

Traffic Monitoring and Congestion Management in the SCOOT Urban Traffic Control System

1998 ◽  
Vol 1634 (1) ◽  
pp. 118-122 ◽  
Author(s):  
David Bretherton ◽  
Keith Wood ◽  
Neil Raha
Keyword(s):  
Control System ◽  
Traffic Control ◽  
Detection System ◽  
Congestion Management ◽  
Traffic Monitoring ◽  
Urban Traffic ◽  
Incident Detection ◽  
The European Union ◽  
Traffic Control System ◽  
Urban Traffic Control

The SCOOT Urban Traffic Control system is now operating in over 170 cities worldwide, including 7 systems in North America. Since the first system was installed, there has been a continuous program of research and development to provide new facilities to meet the requirement of the traffic manager. The latest version of SCOOT (Version 3.1) incorporates a traffic information database, ASTRID, and an incident-detection system, INGRID, and provides a number of facilities for congestion control. The traffic monitoring facilities of SCOOT, including a new facility to estimate emissions from vehicles, and the current program of work to enhance the incident-detection system and to provide additional facilities to manage incidents and congestion are reported in this paper. The work is being carried out as part of the European Union, DGXIII 4th Framework project, COSMOS, with additional funding from the UK Department of Transport. The enhanced system is to be installed in the Kingston Borough of London, where it will be tested in combination with congestion warning information provided by variable message signs.

scholarly journals Travel Time Prediction on Un-Monitored Roads: A Spatial Factorization Machine Based Approach (Student Abstract)

2020 ◽  
Vol 34 (10) ◽  
pp. 13855-13856 ◽  
Author(s):  
Lile Li ◽  
Wei Liu
Keyword(s):  
Traffic Congestion ◽  
Route Planning ◽  
Traffic Monitoring ◽  
Time Of Arrival ◽  
Traffic Data ◽  
Travel Time Prediction ◽  
Large Cities ◽  
Time Prediction ◽  
Real Time Traffic ◽  
Factorization Machine

Real-time traffic monitoring is one of the most important factors for route planning and estimated time of arrival (ETA). Many major roads in large cities are installed with live traffic monitoring systems, inferring the current traffic congestion status and ETAs to other locations. However, there are also many other roads, especially small roads and paths, that are not monitored. Yet, live traffic status on such un-monitored small roads can play a non-negligible role in personalized route planning and re-routing when road incident happens. How to estimate the traffic status on such un-monitored roads is thus a valuable problem to be addressed. In this paper, we propose a model called Spatial Factorization Machines (SFM) to address this problem. A major advantage of the SFM model is that it incorporates physical distances and structures of road networks into the estimation of traffic status on un-monitored roads. Our experiments on real world traffic data demonstrate that the SFM model significantly outperforms other existing models on ETA of un-monitored roads.

Sign in / Sign up

Export Citation Format

Share Document