Palladium(II)-Catalyzed Oxidation of α-Hydroxy Acids with Sodium N-Chlorobenzenesulfonamide in Perchloric Acid Solution: A Kinetic and Mechanistic Study

2004 ◽  
Vol 69 (8) ◽  
pp. 1577-1589 ◽  
Author(s):  
Somanalli K. Revathi ◽  
Sannaiah Ananda ◽  
Kikkeri N. Mohana ◽  
Rangaswamy
Keyword(s):  
Reaction Rate ◽  
Activation Parameters ◽  
Chloride Ions ◽  
Mechanistic Study ◽  
Linear Free Energy Relationship ◽  
Isokinetic Relationship ◽  
Perchloric Acid Solution ◽  
Order Dependence ◽  
Linear Free Energy ◽  
Hydroxybutanoic Acid

Kinetics of oxidation of glycolic acid (GA), lactic acid (LA) and 2-hydroxybutanoic acid (BA) with Chloramines B (CAB) catalyzed by Pd(II) in a HClO4 solution has been studied at 30 °C. The reaction rate shows first-order dependence each on [CAB], [hydroxy acid] and [Pd(II)] and a fractional-order dependence on [H+]. Additions of chloride ions, perchlorate ions and the reduction product of CAB, benzenesulfonamide (BSA), have no effect on the reaction rate. Variations of ionic strength and dielectric permittivity of the medium have no effect on the rate. Activation parameters have been evaluated. A mechanism consistent with kinetic data is proposed. A Taft linear free-energy relationship is observed for the reaction with ρ* = -3.593, indicating an increase in the rate with the presence of electron-donating substituents. An isokinetic relationship is observed with β = 376 K, indicating the effect of enthalpy factors on the rate.

Kinetics and Mechanism of Oxidation of Coumarin and Substituted Coumarins by Chloramine-b in Hydrochloric Acid Medium

2008 ◽  
Vol 33 (4) ◽  
pp. 313-330 ◽  
Author(s):  
J.P. Shubha ◽  
Puttaswamy
Keyword(s):  
Reaction Rate ◽  
Activation Parameters ◽  
Hydroxycinnamic Acids ◽  
Oxidation Products ◽  
Experimental Conditions ◽  
Isokinetic Relationship ◽  
Order Dependence ◽  
Rate Determining Step ◽  
Solvent Isotope ◽  
Substituted Coumarins

The kinetics of oxidation of coumarin (see Equation (1)) and four substituted coumarins, viz. 7-methoxycoumarin, 7-ethoxycoumarin, 7-hydroxycoumarin and 7-nitrocoumarin, to the corresponding o-hydroxycinnamic acids by chloramine-B (CAB) have been studied at 298 K. Under comparable experimental conditions, the reaction rate shows a first-order dependence each upon [CAB]o and [coumarin]o, and individually less than unit order dependence on [H+] and [Cl-]. Addition of benzenesulfonamide retards the reaction rate and the dielectric effect is positive. Variation of ionic strength of the medium does not influence the rate but the rate increases with increase in dielectric constant of the medium. The solvent isotope effect was studied using D2O. The reaction was studied at different temperatures and activation parameters have been evaluated. The stoichiometry of the reaction was found to be 1:1 and the oxidation products of coumarins were identified as their corresponding o-hydroxycinnamic acids. The rate of oxidation of coumarins increases in the order: 7-hydroxycoumarin > 7-ethoxycoumarin > 7-methoxycoumarin > coumarin > 7-nitrocoumarin. The rates satisfactorily correlate with the Hammett γ relationship and the reaction constant ρ is -0.04, which signifies that electron-donating groups enhance the rate and the electron-withdrawing group retards the rate. An isokinetic relationship was observed with β = 348 K, which showed the reaction to be enthalpy controlled. A mechanism consistent with the experimental results is proposed in which the rate-determining step is the formation of an intermediate complex between the substrate and molecular chlorine. The related rate law has been deduced and the decomposition constants were evaluated.

scholarly journals Perborate Oxidation of Substituted 5-Oxoacids in Aqueous Acetic Acid Medium: A Kinetic and Mechanistic Study

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
S. Shree Devi ◽  
B. Muthukumaran ◽  
P. Krishnamoorthy
Keyword(s):  
Acetic Acid ◽  
Acid Medium ◽  
Reaction Rate ◽  
Reaction Medium ◽  
Activation Parameters ◽  
Reaction Rates ◽  
Mechanistic Study ◽  
Aqueous Acetic Acid ◽  
Sodium Perborate ◽  
Acetic Acid Medium

Kinetics and mechanism of oxidation of substituted 5-oxoacids by sodium perborate in aqueous acetic acid medium have been studied. The reaction exhibits first order both in [perborate] and [5-oxoacid] and second order in [H+]. Variation in ionic strength has no effect on the reaction rate, while the reaction rates are enhanced on lowering the dielectric constant of the reaction medium. Electron releasing substituents in the aromatic ring accelerate the reaction rate and electron withdrawing substituents retard the reaction. The order of reactivity among the studied 5-oxoacids is p-methoxy ≫ p-methyl > p-phenyl > –H > p-chloro > p-bromo > m-nitro. The oxidation is faster than H2O2 oxidation. The formation of H2BO3+ is the reactive species of perborate in the acid medium. Activation parameters have been evaluated using Arrhenius and Eyring’s plots. A mechanism consistent with the observed kinetic data has been proposed and discussed. Based on the mechanism a suitable rate law is derived.

scholarly journals Kinetics and Mechanistic Study of Cetyltrimethylammonium Bromide Catalyzed Oxidation of Tetraethylene Glycol byN-Chlorosaccharin in Acidic Medium

2008 ◽  
Vol 5 (3) ◽  
pp. 598-606
Author(s):  
Vandana Sharma ◽  
K. V. Sharma ◽  
V. W. Bhagwat
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
Reaction Rate ◽  
Activation Parameters ◽  
Mechanistic Study ◽  
Tetraethylene Glycol ◽  
Aqueous Acetic Acid ◽  
Acetic Acid Medium ◽  
First Order ◽  
Dielectric Effect ◽  
Catalyzed Oxidation

The kinetics and mechanism of cetyltrimethylammonium bromide catalyzed oxidation of tetraethylene glycol [2,2'-(oxibis(ethylenoxy)diethanol)] byN-chlorosaccharin in aqueous acetic acid medium in presence of perchloric acid have been investigated at 323K. The reaction is first order dependence on Nchlorosaccharin. The reaction rate follows first order kinetics with respect to [tetraethylene glycol] with excess concentration of other reactants. The miceller effect due to cetyltrimethylammonium bromide, a cationic surfactant has been studied. The change in ionic strength shows negligible salt effect. The dielectric effect is found to be positive. Addition of one of the products (saccharin) retards the reaction rate. Activation parameters are calculated from the Arrhenious plot. A possible mechanism consistent with the experimental results has been proposed.

A KINETICS AND MECHANISTIC STUDY OF THE OXIDATION OF L-ARGININE BY QDC IN DMF-WATER MEDIUM

2021 ◽  
pp. 11-12
Author(s):  
Deepika Jain ◽  
Shilpa Rathor
Keyword(s):  
Perchloric Acid ◽  
Reaction Rate ◽  
Main Product ◽  
Activation Parameters ◽  
Reaction Rates ◽  
Mechanistic Study ◽  
Water Medium ◽  
Volume Percentage ◽  
Kinetics Of Oxidation ◽  
Kinetics Of

The present paper describes the kinetics of oxidation of l-Arginine by QDC in the presence of perchloric acid in 30% DMF-H O(v/v) medium at 2 + 40⁰C spectrophotometrically at λ =354nm. The reaction is rst order with respect to [QDC], [H ], and [substrate]. The reaction rate increased with max increasing volume percentage of DMF in reaction mixture. Michaelis- Menten type kinetic was observed with l-Arginine. The reaction rates were studied at different temperature and the activation parameters has been computed. The main product was identied as Cr (III) and 4-Guanidino buteraldehyde.

Kinetics and mechanistic study of the ruthenium(III) catalyzed oxidative deamination and decarboxylation of L-valine by alkaline permanganate

2001 ◽  
Vol 79 (12) ◽  
pp. 1926-1933 ◽  
Author(s):  
Dinesh C Bilehal ◽  
Raviraj M Kulkarni ◽  
Sharanappa T Nandibewoor
Keyword(s):  
Ionic Strength ◽  
Alkaline Medium ◽  
Activation Parameters ◽  
Solvent Polarity ◽  
Mechanistic Study ◽  
Reaction Products ◽  
Order Dependence ◽  
Alkaline Permanganate ◽  
Kinetics Of ◽  
Catalyzed Oxidation

The kinetics of ruthenium(III) catalyzed oxidation of L-valine by permanganate in alkaline medium at a constant ionic strength has been studied spectrophotometrically. The reaction between permanganate and L-valine in alkaline medium exhibits 2:1 stoichiometry (KMnO4:L-valine). The reaction shows first-order dependence on the concentration of permanganate and ruthenium(III) and less than unit-order dependence on the concentrations of L-valine and alkali. The reaction rate increases both with an increase in ionic strength and a decrease in solvent polarity of the medium. Initial addition of reaction products did not significantly affect the rate. A mechanism involving the formation of a complex between catalyst and substrate has been proposed. The activation parameters were computed with respect to the slowest step of the mechanism.Key words: oxidation, L-valine, catalysis, ruthenium(III), kinetics.

scholarly journals Meso-tetraphenylporphyriniron(iii) chloride catalyzed oxidation of aniline and its substituents by magnesium monoperoxyphthalate in aqueous acetic acid medium

2012 ◽  
Vol 14 (4) ◽  
pp. 35-41 ◽  
Author(s):  
Raja Manickam ◽  
Karunakaran Kulandaivelu
Keyword(s):  
Acetic Acid ◽  
Acid Medium ◽  
First Generation ◽  
Activation Parameters ◽  
Aqueous Acetic Acid ◽  
Substituted Anilines ◽  
Isokinetic Relationship ◽  
Acetic Acid Medium ◽  
Linear Free Energy ◽  
Energy Relationships

Abstract The catalytic properties of the first generation catalyst meso-tetraphenylporphyriniron(III) chloride and magnesium monoperoxyphthalate (MMPP) as oxidant have been studied in the oxidation of aniline and its substituents in acetic acid medium. The thermodynamic parameters for the oxidation have been determined and discussed. It confirms the Exner relationship (only at the low range of temperatures) and also some of the activation parameters to the isokinetic relationships. The magnesium monoperoxyphthalate oxidation with 18 ortho- meta- and para-substituted anilines fulfills with isokinetic relationship but not to any of the linear free energy relationships. The reaction mechanism and the rate law were proposed.

Kinetics and mechanism of oxidation of tris-(1,10-phenanthroline)iron(II) by chlorine and bromine and of the reduction of tris-(1,10-phenanthroline)iron(III) by iodide ions

1979 ◽  
Vol 57 (15) ◽  
pp. 2065-2070 ◽  
Author(s):  
Jide Ige ◽  
J. Folorunso Ojo ◽  
Olusegun Olubuyide
Keyword(s):  
Free Energy ◽  
Ionic Strength ◽  
Activation Parameters ◽  
Chloride Ions ◽  
Reaction Intermediates ◽  
Rate Law ◽  
Iodide Ions ◽  
Good Linear ◽  
Linear Free Energy ◽  
Mechanism Of Oxidation

The rates of the oxidation of tris-(1,10-phenanthroline)iron(II) by chlorine and bromine, and of the reduction of tris-(1,10-phenanthroline)iron(III) by iodide ions have been measured at ionic strength I = 1.0 mol dm−3 (LiClO4). All the reactions obey second-order rate law:[Formula: see text]The activation parameters for the reactions are: Fe(Phen)32+/Br2: ΔH≠ = (64.2 ± 3.2) kJ mol−1, ΔS≠ = −(24.9 ± 1.5) J mol−1 K−1. Fe(Phen)33+/I−:ΔH≠ = (39.8 ± 2.1) kJ mol−1, ΔS≠ = −(19.7 ± 0.8) J mol−1 K−1.The reactions of tris-(1,10-phenanthroline)iron(II) with chlorine and bromine are unaffected by chloride, bromide, and acid. The proposed mechanism for these reactions involves a series of one-electron changes, with the species X2− (X = Cl, Br) as reaction intermediates, since good linear free energy correlations for the primary step, resulting in the formation of X2−, are obtained. The reduction of tris-(1,10-phenanthroline)iron(III) by iodide ions is catalysed by bromide and chloride ions, whereas the reduction of aquoiron(III) by iodide ions is known to be inhibited by bromide and chloride ions. A mechanistic interpretation of this observation is suggested.

Kinetics and mechanism of bromination of styrenes

1967 ◽  
Vol 45 (2) ◽  
pp. 167-173 ◽  
Author(s):  
Keith Yates ◽  
W. V. Wright
Keyword(s):  
Activation Parameters ◽  
Second Order ◽  
Linear Free Energy Relationship ◽  
Reaction Products ◽  
Order Process ◽  
Third Order ◽  
Linear Free Energy ◽  
Reaction Constant ◽  
Relationship Of ◽  
Kinetics Of

The kinetics of bromination of six substituted styrènes (3-fluoro-, 3-chloro-, 3-bromo-, 3,4-dichloro-, 3-nitro-, and 4-nitro-) in anhydrous acetic acid have been investigated at several temperatures. At 25.3 °C the reactions follow the rate expression [Formula: see text]The rate constants for the second order process show a good linear free energy relationship of the log k versus σ type with ρ = − 2.24. (The value obtained at 35.3 °C is − 1.93.) No simple rate-substituent dependence is obtained for the more complex third order process. Activation parameters have been obtained for the second order brominations, the ΔS≠ values being large and negative. Bromination of styrene in the presence of a large excess of acetate or nitrate gives only two products in each case, the α,β-dibromide and the α –acetoxy β-bromide or α -nitrato- β -bromide respectively.The magnitude of the reaction constant ρ, the values of ΔS≠, and the reaction products all support a mechanism involving a highly unsymmetrical bromonium ion intermediate.

scholarly journals Kinetics and Mechanistic Study of the Ruthenium(III) Catalysed Oxidative Decarboxylation of L-Proline by Alkaline Heptavalent Manganese (Stopped flow technique)

2005 ◽  
Vol 2 (1) ◽  
pp. 91-100 ◽  
Author(s):  
R. S. Shettar ◽  
M. I. Hiremath ◽  
S. T. Nandibewoor
Keyword(s):  
Ionic Strength ◽  
Alkaline Medium ◽  
Activation Parameters ◽  
Solvent Polarity ◽  
Mechanistic Study ◽  
Slow Step ◽  
Oxidative Decarboxylation ◽  
Reaction Products ◽  
Order Dependence ◽  
Catalysed Oxidation

The kinetics of ruthenium(III) catalysed oxidation of L-Proline by permanganate in alkaline medium at a constant ionic strength has been studied spectrophotometrically using a rapid kinetic accessory. The reaction between permanganate and L-Proline in alkaline medium exhibits 2:1 stoichiometry (KMnO4: L-Proline). The reaction shows first order dependence on [permanganate] and [ruthenium(III)] and apparent less than unit order dependence each in L-Proline and alkali concentrations. Reaction rate increases with increase in ionic strength and decrease in solvent polarity of the medium. Initial addition of reaction products did not affect the rate significantly. A mechanism involving the formation of a complex between catalyst and substrate has been proposed. The activation parameters were computed with respect to the slow step of the mechanism and discussed

scholarly journals Substrate analogues as probes of the catalytic mechanism of l-mandelate dehydrogenase from Rhodotorula graminis

1994 ◽  
Vol 297 (3) ◽  
pp. 647-652 ◽  
Author(s):  
O Smékal ◽  
G A Reid ◽  
S K Chapman
Keyword(s):  
Transition State ◽  
Catalytic Mechanism ◽  
Activation Parameters ◽  
Linear Free Energy Relationship ◽  
Free Energies ◽  
Linear Free Energy ◽  
Kinetic Isotope ◽  
Substrate Analogues ◽  
Reaction Constant ◽  
Delta G

A detailed kinetic analysis of the oxidation of mono-substituted mandelates catalysed by L-(+)-mandelate dehydrogenase (L-MDH) from Rhodotorula graminis has been carried out to elucidate the role of the substrate in the catalytic mechanism. Values of Km and kcat. (25 degrees C, pH 7.5) were determined for mandelate and eight substrate analogues. Values of the activation parameters, delta H++ and delta S++ (determined over the range 5-37 degrees C), for mandelate and all substrate analogues were compensatory resulting in similar low values for free energies of activation delta G++ (approx. 60 kJ.mol-1 at 298.15 K) in all cases. A kinetic-isotope-effect value of 1.1 +/- 0.1 was observed using D,L-[2-2H]mandelate as substrate and was invariant over the temperature range studied. The logarithm of kcat. values for the enzymic oxidation of mandelate and all substrate analogues (except 4-hydroxymandelate) showed good correlation with Taft's dual substituent constant omega (where omega = omega I + 0.64 omega +R) and gave a positive reaction constant value, rho, of 0.36 +/- 0.07. This linear free-energy relationship was verified by analysing the data using isokinetic methods. These findings support the hypothesis that the enzyme-catalysed reaction proceeds via the same transition state for each substrate and indicates that this transition state is relatively nonpolar but has an electron-rich centre at the alpha-carbon position.

Sign in / Sign up

Export Citation Format

Share Document