Influence of Geometry on Pumping Characteristics of Screw Agitators in a Tube

1997 ◽  
Vol 62 (12) ◽  
pp. 1871-1878 ◽  
Author(s):  
Libor Sedláček ◽  
František Rieger
Keyword(s):  
Reynolds Number ◽  
Specific Energy ◽  
Dynamic Method ◽  
Root Diameter ◽  
Geometrical Parameters ◽  
Wide Range ◽  
The Difference ◽  
Inductive Sensors ◽  
Liquid Surfaces

The pumping characteristics of screw agitators in tubes were measured using a new dynamic method. Two inductive sensors record the difference of liquid surfaces in the tank while the liquid is pumped out. The characteristics in the form of dependence of the dimensionless specific energy on the dimensionless pumping capacity were obtained over a wide range of Reynolds number values. Screw agitators with different root diameter, pitch and number of flights were used in the experiments. The influence of above-mentioned geometrical parameters on pumping characteristics is discussed.

Process characteristics of screw impellers with a draught tube for Newtonian liquids. The power input

1981 ◽  
Vol 46 (9) ◽  
pp. 2007-2020 ◽  
Author(s):  
Pavel Seichter ◽  
Jiří Dohnal ◽  
František Rieger
Keyword(s):  
Reynolds Number ◽  
Experimental Verification ◽  
Power Input ◽  
Creeping Flow ◽  
Total Power ◽  
Geometrical Parameters ◽  
Draught Tube ◽  
Process Characteristics ◽  
Wide Range ◽  
Newtonian Liquids

An expression has been proposed for the power input of a screw impeller with a draught tube in the creeping flow regime based on the analogy with extruder screws. Experimental verification has confirmed practical utility of the expression in a wide range of geometrical parameters of the impeller and for the Reynolds number for mixing below 20. The total power input of the impeller is expressed as a sum of the input inducing the drag flow and the input to create the pressure flow. The former of the inputs may be deduced from the theory of extruders while an empirical approach based on experiment has been used to formulate an expression for the latter.

Design guidelines to mitigate distortion in material jetting specimens

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kamran Kardel ◽  
Ali Khoshkhoo ◽  
Andres L. Carrano
Keyword(s):  
Aspect Ratio ◽  
Layer Thickness ◽  
Design Guidelines ◽  
Geometrical Parameters ◽  
Content Type ◽  
Build Orientation ◽  
Aspect Ratios ◽  
Wide Range ◽  
The Difference ◽  
Part Thickness

Purpose The purpose of this paper is to investigate the effects of layer thickness, aspect ratio, part thickness and build orientation on distortion to have a better understanding of its behavior in material jetting technology. Design/methodology/approach Specimens with two layer thicknesses (14 and 28 µm) were printed in two aspect ratios (2:1) and (10:1), four thickness values (1, 2, 3 and 4 mm) and three build orientations (45d, XY and YX) and scanned with a wide-area 3D surface scanner to quantify distortion. The material used to build the test specimens was a commercially available resin, VeroWhitePlus RGD835. Findings The results of this study showed that all printed specimens by material jetting 3D printers had some level of distortion. The 1-mm thickness specimens, for both layer thicknesses of 14 µm and 28 µm, showed a wide range of anomalies including reverse coil set (RCS), reverse cross bow (RCB), cross bow (CB), wavy edge (WE) and some moderate twisting (T). Similar occurrences were observed for the 2-mm thickness specimens as there were RCS, WE, RCB and T anomalies that show the difference between the thinner specimens (1- and 2-mm) with the thicker ones (3- and 4-mm). In both 3- and 4-mm thickness specimens, there was more consistency in terms of distortion with mainly RCS and RCB anomalies. In total, six different types of flatness anomalies were found to occur with the following incidences: reverse coil set (91 specimens, 63.19%), reverse cross bow (50 specimens, 34.72%), wavy edge (23 specimens, 15.97%), twist (19 specimens, 12.50%), coil set (11 specimens, 7.64%) and cross bow (7 specimens, 4.86%). Originality/value This study expands the research on how the preprocess parameters such as layer thickness and build orientation and the geometrical parameters such as part thickness and aspect ratio cause dimensional distortion. Distortion is a pervasive consequence of the curing process in photopolymerization and explores one of the most common defects that come across in polymeric-based additive manufacturing. In addition to the characterization of the type and magnitude of distortion, the contributions of this work also include establishing the foundation for design guidelines aiming at minimizing distortion in material jetting.

Numerical Study of Wake-Induced Vibrations for Cylinders in Tandem With Different Diameters at High Reynolds Numbers

2016 ◽  
Author(s):  
Vinh-Tan Nguyen ◽  
Wai Hong Ronald Chan ◽  
Hoang-Huy Nguyen
Keyword(s):  
Reynolds Number ◽  
High Reynolds Number ◽  
Experimental Studies ◽  
Cross Flow ◽  
Reynolds Numbers ◽  
Geometrical Parameters ◽  
Tandem Arrangement ◽  
Wide Range ◽  
High Reynolds ◽  
Different Diameters

Wake induced vibration is a distinctive phenomena of fluid-elastic instability arising from interactions of a body in the wakes of another bluff body and characteristically different from the well-understood vortex induced vibrations. This work presents a fluid-structure interactions numerical model as an alternative tool for investigation of wake induced vibrations. In an attempt to better understand mechanisms of wake induced motions, a simplified model of two cylinders in tandem arrangement with different diameters under cross flow was considered in this work. Cross flow velocity conditions vary from moderate to high Reynolds number (Re = 2 × 103–5 × 104) in the same range as many experiment reported recently in literature. A hybrid detached eddy simulation approach is used for turbulence modelling at those high Reynolds number conditions in order to resolve complex near body flow features as well as in the wake regions. The proposed model is first validated through extensive benchmarking with experimental studies for responses of tandem cylinders at the same flow conditions as in physical experiment. With good agreement to experimental data, the model was extended for simulations of cylinders of different diameters in tandem arrangement. For different diameters between upstream and downstream cylinders, the fundamental frequencies of shedded vortices from the cylinders are essentially different. It is observed from the present study that responses of the downstream cylinder are characterized not only the geometrical parameters such as distances and diameter differences between the cylinders but also the Reynolds number. As contrast to many experimental studies, at constant Reynolds number, downstream cylinders are found to have multiple lock-in regions in a wide range of reduced velocities. This distinctive behaviour of the cylinders at constant Reynolds numbers and diameter ratios suggests strong evidence of complicated mechanism of wake-induced vibrations phenomena. Further analysis of results from high fidelity numerical simulations were carried out for detailed investigations of force amplitudes and frequencies. The current analysis revealed multiple frequency content of the force; thus explaining high response amplitudes of the downstream cylinder at high reduced velocity.

Comparative Effects of High-Tech Visual Scene Displays and Low-Tech Isolated Picture Symbols on Engagement From Students With Multiple Disabilities

2019 ◽  
Vol 50 (4) ◽  
pp. 693-702 ◽  
Author(s):  
Christine Holyfield ◽  
Sydney Brooks ◽  
Allison Schluterman
Keyword(s):  
Language Learning ◽  
Augmentative And Alternative Communication ◽  
Visual Analysis ◽  
Multiple Disabilities ◽  
Visual Scene ◽  
Future Research ◽  
High Tech ◽  
Single Subject ◽  
Wide Range ◽  
The Difference

Purpose Augmentative and alternative communication (AAC) is an intervention approach that can promote communication and language in children with multiple disabilities who are beginning communicators. While a wide range of AAC technologies are available, little is known about the comparative effects of specific technology options. Given that engagement can be low for beginning communicators with multiple disabilities, the current study provides initial information about the comparative effects of 2 AAC technology options—high-tech visual scene displays (VSDs) and low-tech isolated picture symbols—on engagement. Method Three elementary-age beginning communicators with multiple disabilities participated. The study used a single-subject, alternating treatment design with each technology serving as a condition. Participants interacted with their school speech-language pathologists using each of the 2 technologies across 5 sessions in a block randomized order. Results According to visual analysis and nonoverlap of all pairs calculations, all 3 participants demonstrated more engagement with the high-tech VSDs than the low-tech isolated picture symbols as measured by their seconds of gaze toward each technology option. Despite the difference in engagement observed, there was no clear difference across the 2 conditions in engagement toward the communication partner or use of the AAC. Conclusions Clinicians can consider measuring engagement when evaluating AAC technology options for children with multiple disabilities and should consider evaluating high-tech VSDs as 1 technology option for them. Future research must explore the extent to which differences in engagement to particular AAC technologies result in differences in communication and language learning over time as might be expected.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Generalized Heterodyne Configurations for Photo-induced Force Microscopy

2019 ◽  
Author(s):  
Le Wang ◽  
Devon Jakob ◽  
Haomin Wang ◽  
Alexis Apostolos ◽  
Marcos M. Pires ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Repetition Rate ◽  
Modulation Frequency ◽  
High Harmonic ◽  
Chemical Imaging ◽  
Heterodyne Detection ◽  
Force Microscopy ◽  
Wide Range ◽  
The Difference ◽  
Afm Cantilever

<div>Infrared chemical microscopy through mechanical probing of light-matter interactions by atomic force microscopy (AFM) bypasses the diffraction limit. One increasingly popular technique is photo-induced force microscopy (PiFM), which utilizes the mechanical heterodyne signal detection between cantilever mechanical resonant oscillations and the photo induced force from light-matter interaction. So far, photo induced force microscopy has been operated in only one heterodyne configuration. In this article, we generalize heterodyne configurations of photoinduced force microscopy by introducing two new schemes: harmonic heterodyne detection and sequential heterodyne detection. In harmonic heterodyne detection, the laser repetition rate matches integer fractions of the difference between the two mechanical resonant modes of the AFM cantilever. The high harmonic of the beating from the photothermal expansion mixes with the AFM cantilever oscillation to provide PiFM signal. In sequential heterodyne detection, the combination of the repetition rate of laser pulses and polarization modulation frequency matches the difference between two AFM mechanical modes, leading to detectable PiFM signals. These two generalized heterodyne configurations for photo induced force microscopy deliver new avenues for chemical imaging and broadband spectroscopy at ~10 nm spatial resolution. They are suitable for a wide range of heterogeneous materials across various disciplines: from structured polymer film, polaritonic boron nitride materials, to isolated bacterial peptidoglycan cell walls. The generalized heterodyne configurations introduce flexibility for the implementation of PiFM and related tapping mode AFM-IR, and provide possibilities for additional modulation channel in PiFM for targeted signal extraction with nanoscale spatial resolution.</div>

Entropy generation and heat transfer analysis for ferrofluid flow between two rotating disks with variable conductivity

2021 ◽  
pp. 095440622199118
Author(s):  
Anupam Bhandari
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Differential Equations ◽  
Entropy Generation ◽  
Heat Transfer Analysis ◽  
Entropy Generation Rate ◽  
Geometrical Parameters ◽  
Rotating Disks ◽  
Coupled Differential Equations ◽  
Lower Disk

Present model analyze the flow and heat transfer of water-based carbon nanotubes (CNTs) [Formula: see text] ferrofluid flow between two radially stretchable rotating disks in the presence of a uniform magnetic field. A study for entropy generation analysis is carried out to measure the irreversibility of the system. Using similarity transformation, the governing equations in the model are transformed into a set of nonlinear coupled differential equations in non-dimensional form. The nonlinear coupled differential equations are solved numerically through the finite element method. Variable viscosity, variable thermal conductivity, thermal radiation, and volume concentration have a crucial role in heat transfer enhancement. The results for the entropy generation rate, velocity distributions, and temperature distribution are graphically presented in the presence of physical and geometrical parameters of the flow. Increasing the values of ferromagnetic interaction number, Reynolds number, and temperature-dependent viscosity enhances the skin friction coefficients on the surface and wall of the lower disk. The local heat transfer rate near the lower disk is reduced in the presence of Harman number, Reynolds number, and Prandtl number. The ferrohydrodynamic flow between two rotating disks might be useful to optimize the use of hybrid nanofluid for liquid seals in rotating machinery.

scholarly journals Hydromechanics of low-Reynolds-number flow. Part 2. Singularity method for Stokes flows

1975 ◽  
Vol 67 (4) ◽  
pp. 787-815 ◽  
Author(s):  
Allen T. Chwang ◽  
T. Yao-Tsu Wu
Keyword(s):  
Exact Solutions ◽  
Stokes Flow ◽  
Fundamental Solutions ◽  
The Body ◽  
Circular Cylinders ◽  
Geometrical Parameters ◽  
Flow Problems ◽  
Singularity Method ◽  
Wide Range ◽  
Body Shapes

The present study further explores the fundamental singular solutions for Stokes flow that can be useful for constructing solutions over a wide range of free-stream profiles and body shapes. The primary singularity is the Stokeslet, which is associated with a singular point force embedded in a Stokes flow. From its derivatives other fundamental singularities can be obtained, including rotlets, stresslets, potential doublets and higher-order poles derived from them. For treating interior Stokes-flow problems new fundamental solutions are introduced; they include the Stokeson and its derivatives, called the roton and stresson.These fundamental singularities are employed here to construct exact solutions to a number of exterior and interior Stokes-flow problems for several specific body shapes translating and rotating in a viscous fluid which may itself be providing a primary flow. The different primary flows considered here include the uniform stream, shear flows, parabolic profiles and extensional flows (hyper-bolic profiles), while the body shapes cover prolate spheroids, spheres and circular cylinders. The salient features of these exact solutions (all obtained in closed form) regarding the types of singularities required for the construction of a solution in each specific case, their distribution densities and the range of validity of the solution, which may depend on the characteristic Reynolds numbers and governing geometrical parameters, are discussed.

scholarly journals Natural Science and Supernatural Thought Experiments

Religions ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 389
Author(s):  
James Robert Brown
Keyword(s):  
Natural Science ◽  
Thought Experiment ◽  
Thought Experiments ◽  
The Other ◽  
Space And Time ◽  
Wide Range ◽  
The Difference ◽  
Theological Thought

Religious notions have long played a role in epistemology. Theological thought experiments, in particular, have been effective in a wide range of situations in the sciences. Some of these are merely picturesque, others have been heuristically important, and still others, as I will argue, have played a role that could be called essential. I will illustrate the difference between heuristic and essential with two examples. One of these stems from the Newton–Leibniz debate over the nature of space and time; the other is a thought experiment of my own constructed with the aim of making a case for a more liberal view of evidence in mathematics.

The Effect of Pulsed Blowing on the Boundary Layer of a Highly Loaded Low Pressure Turbine Blade

2013 ◽  
Author(s):  
Marion Mack ◽  
Roland Brachmanski ◽  
Reinhard Niehuis
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Mach Number ◽  
Suction Side ◽  
Reynolds Numbers ◽  
Low Pressure ◽  
Trailing Edge ◽  
Low Pressure Turbine ◽  
Wide Range ◽  
Highly Loaded

The performance of the low pressure turbine (LPT) can vary appreciably, because this component operates under a wide range of Reynolds numbers. At higher Reynolds numbers, mid and aft loaded profiles have the advantage that transition of suction side boundary layer happens further downstream than at front loaded profiles, resulting in lower profile loss. At lower Reynolds numbers, aft loading of the blade can mean that if a suction side separation exists, it may remain open up to the trailing edge. This is especially the case when blade lift is increased via increased pitch to chord ratio. There is a trend in research towards exploring the effect of coupling boundary layer control with highly loaded turbine blades, in order to maximize performance over the full relevant Reynolds number range. In an earlier work, pulsed blowing with fluidic oscillators was shown to be effective in reducing the extent of the separated flow region and to significantly decrease the profile losses caused by separation over a wide range of Reynolds numbers. These experiments were carried out in the High-Speed Cascade Wind Tunnel of the German Federal Armed Forces University Munich, Germany, which allows to capture the effects of pulsed blowing at engine relevant conditions. The assumed control mechanism was the triggering of boundary layer transition by excitation of the Tollmien-Schlichting waves. The current work aims to gain further insight into the effects of pulsed blowing. It investigates the effect of a highly efficient configuration of pulsed blowing at a frequency of 9.5 kHz on the boundary layer at a Reynolds number of 70000 and exit Mach number of 0.6. The boundary layer profiles were measured at five positions between peak Mach number and the trailing edge with hot wire anemometry and pneumatic probes. Experiments were conducted with and without actuation under steady as well as periodically unsteady inflow conditions. The results show the development of the boundary layer and its interaction with incoming wakes. It is shown that pulsed blowing accelerates transition over the separation bubble and drastically reduces the boundary layer thickness.

Sign in / Sign up

Export Citation Format

Share Document