Abstract
This paper describes the application of capillary zone electrophoresis/laser-induced fluorescence detection (CZE/LIF) to the discovery of acidic compounds in environmental matrixes or the screening of extracts for acidic components. Published studies indicate that coal-derived materials contain a significant fraction of acidic compounds relative to materials derived from petroleum and shales. Such compounds may be useful as marker compounds for site assessment and source apportionment issues, and their identification may be important in toxicological and other health issues. We used deep-UV light from the frequency-doubled Ar ion laser at 244 and 257 nm to study extracts of samples. The CZE/LIF technique possesses good sensitivity and therefore overcomes one of the limitations of CZE with UV detection. The present work depends on high pressure/temperature solvent extraction of polynuclear aromatic hydrocarbon (PNA)-contaminated soil, followed by separation using CZE. The anionic analytes were separated by using borate or phosphate buffer (pH 9.2–12.3) after a chemical class separation. Samples were also characterized by gas chromatography/mass spectrometry (GC/MS) using full scans at low resolution, and elemental compositions were determined unequivocally by GC/high-resolution MS (GC/HRMS) using mass peak profiling (MPP). The similarity of low-resolution electron ionization mass spectra for a standard, 1-hydroxypyrene, and for a series of compounds in a contaminated-soil extract suggested that several types of phenolic and hydroxy-PNAs were present, including hydroxylated derivatives of fluorenes, fluoranthenes, and pyrenes. GC/HRMS using MPP confirmed the elemental compositions of the hydroxyfluorenes and hydroxypyrenes (and presumably hydroxyfluoranthenes) as [C13H10O] and [C16H10O], respectively. A new version of the MPP software was written for the Finnigan-MAT 900S-Trap and was similar to that developed previously for the VG 250SE. Inclusion of a calibration ion in addition to a lock mass ion in the multiple-ion detection descriptor provided errors of <1 ppm for the 3 partial profiles of the analytes. A mass resolution of 31 000 was used to resolve the analyte signals from interferences evident in the full M+1 and M+2 profiles in the case of the hydroxyfluorenes. Derivatization was also performed to form the tert-butyldimethylsilyl derivatives of phenolic hydroxy groups as a further confirmation of structure.
Glucosylsterols in extracts of Euryale ferox identified by high resolution NMR and mass spectrometry.