Support Effect in Carbon Oxide(s) Hydrogenation on Cu-Cr Supported Catalysts

1993 ◽  
Vol 58 (4) ◽  
pp. 791-797
Author(s):  
Zahia Rassoul ◽  
Joël Barrault ◽  
Mohamed M. Bettahar

Reducibility, adsorptive properties and catalytic properties of Cu-Cr supported on TiO2, ZnO and Al2O3 were studied in carbon oxide(s) hydrogenation. ZnO is the best retardant for the reduction of copper, stabilizing more strongly Cu+ species and retaining great amounts of H2 during the reduction of the calcined precursors. A strong support effect is observed for the CO2/H2 reaction and good correlations are established between catalytic activities, Cu+ species present in the reduced state and H2 adsorption and storage. ZnO is the most active support but not the most selective one for this reaction. The support effect is not so important for the CO/H2 reaction, but ZnO supported catalyst is again the most active and also the most selective.

2021 ◽  
Author(s):  
Guokang Han ◽  
Yongrong Sun ◽  
Yuxin Liu ◽  
Lingfeng Li ◽  
Xudong Li ◽  
...  

The nature of carbon support has huge effects on the catalytic properties of supported catalysts. When utilized for electrochemical purposes as support for precious metal in acid media, the oxygen...


Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4528
Author(s):  
Katarína Šuchová ◽  
Vladimír Puchart ◽  
Nikolaj Spodsberg ◽  
Kristian B. R. Mørkeberg Krogh ◽  
Peter Biely

Catalytic properties of GH30 xylanases belonging to subfamilies 7 and 8 were compared on glucuronoxylan, modified glucuronoxylans, arabinoxylan, rhodymenan, and xylotetraose. Most of the tested bacterial GH30-8 enzymes are specific glucuronoxylanases (EC 3.2.1.136) requiring for action the presence of free carboxyl group of MeGlcA side residues. These enzymes were not active on arabinoxylan, rhodymenan and xylotetraose, and conversion of MeGlcA to its methyl ester or its reduction to MeGlc led to a remarkable drop in their specific activity. However, some GH30-8 members are nonspecific xylanases effectively hydrolyzing all tested substrates. In terms of catalytic activities, the GH30-7 subfamily is much more diverse. In addition to specific glucuronoxylanases, the GH30-7 subfamily contains nonspecific endoxylanases and predominantly exo-acting enzymes. The activity of GH30-7 specific glucuronoxylanases also depend on the presence of the MeGlcA carboxyl, but not so strictly as in bacterial enzymes. The modification of the carboxyl group of glucuronoxylan had only weak effect on the action of predominantly exo-acting enzymes, as well as nonspecific xylanases. Rhodymenan and xylotetraose were the best substrates for exo-acting enzymes, while arabinoxylan represented hardly degradable substrate for almost all tested GH30-7 enzymes. The results expand current knowledge on the catalytic properties of this relatively novel group of xylanases.


2016 ◽  
Vol 40 (3) ◽  
pp. 2904-2909 ◽  
Author(s):  
Lili Song ◽  
Chao Chen ◽  
Xiangbin Chen ◽  
Ning Zhang

MOFs exhibited different catalytic activities depending on the organic groups decorated on the pore walls, which displayed a synergetic catalytic effect.


2003 ◽  
Vol 4 (8) ◽  
pp. 435-439 ◽  
Author(s):  
Eric Gautron ◽  
Anthony Garron ◽  
Emmanuelle Bost ◽  
Florence Epron

Catalysts ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 800 ◽  
Author(s):  
Andrea Fasolini ◽  
Silvia Ruggieri ◽  
Cristina Femoni ◽  
Francesco Basile

Syngas and Hydrogen productions from methane are industrially carried out at high temperatures (900 °C). Nevertheless, low-temperature steam reforming can be an alternative for small-scale plants. In these conditions, the process can also be coupled with systems that increase the overall efficiency such as hydrogen purification with membranes, microreactors or enhanced reforming with CO2 capture. However, at low temperature, in order to get conversion values close to the equilibrium ones, very active catalysts are needed. For this purpose, the Rh4(CO)12 cluster was synthetized and deposited over Ce0.5Zr0.5O2 and ZrO2 supports, prepared by microemulsion, and tested in low-temperature steam methane reforming reactions under different conditions. The catalysts were active at 750 °C at low Rh loadings (0.05%) and outperformed an analogous Rh-impregnated catalyst. At higher Rh concentrations (0.6%), the Rh cluster deposited on Ce0.5Zr0.5 oxide reached conversions close to the equilibrium values and good stability over long reaction time, demonstrating that active phases derived from Rh carbonyl clusters can be used to catalyze steam reforming reactions. Conversely, the same catalyst suffered from a fast deactivation at 500 °C, likely related to the oxidation of the Rh phase due to the oxygen-mobility properties of Ce. Indeed, at 500 °C the Rh-based ZrO2-supported catalyst was able to provide stable results with higher conversions. The effects of different pretreatments were also investigated: at 500 °C, the catalysts subjected to thermal treatment, both under N2 and H2, proved to be more active than those without the H2 treatment. In general, this work highlights the possibility of using Rh carbonyl-cluster-derived supported catalysts in methane reforming reactions and, at low temperature, it showed deactivation phenomena related to the presence of reducible supports.


2019 ◽  
Vol 48 (34) ◽  
pp. 12956-12963 ◽  
Author(s):  
Xinyi Ma ◽  
Peipei He ◽  
Baijie Xu ◽  
Jingkun Lu ◽  
Rong Wan ◽  
...  

The catalytic properties and polyanionic structure of pyrazine dicarboxylate-bridged arsenotungstate are reported.


2014 ◽  
Vol 924 ◽  
pp. 217-226 ◽  
Author(s):  
Xiang Feng Hu ◽  
Wen Yang ◽  
Ning Wang ◽  
Shi Zhong Luo ◽  
Wei Chu

Nickel/carbon nanotubes (Ni/CNTs), Nickel/alumina (Ni/Al2O3), calcium-promoted Ni/CNTs and calcium-promoted Ni/Al2O3 were synthesized by impregnation method. Methanation of carbon dioxide was used as a probe to evaluate their catalytic performance. The features of these Ni-based catalysts were investigated via XRD, H2-TPR, H2-TPD and the N2 adsorptiondesorption isotherms. H2-TPR showed that nickel species on Ni/CNTs was reduced more easily with respect to that on Ni/Al2O3, and addition of Ca can increase the content of easily reducible Ni species for Ni/CNTs. XRD and H2-TPD indicated that addition of Ca promoted dispersion for CNTs-supported catalyst. These finding ultimately enhanced catalytic activity and stability for Ni/CNTs catalyst modified with Ca.


Sign in / Sign up

Export Citation Format

Share Document