Synthesis of 1,2,4-triazino[5,6-b]- and imidazo[4,5-b]quinoline derivatives

1984 ◽  
Vol 49 (11) ◽  
pp. 2628-2634 ◽  
Author(s):  
Jan Slouka ◽  
Vojtěch Bekárek ◽  
Karel Nálepa ◽  
Antonín Lyčka
Keyword(s):  
Acetic Acid ◽  
Acid Medium ◽  
Carbonyl Compounds ◽  
Amino Derivative ◽  
Quinoline Derivatives ◽  
Hydrolysis Of

o-Nitrophenylpyruvic acid thiosemicarbazone (I) has been cyclized to 2-thio-5-(o-nitrobenzyl)-6-azauracil (II) which has been transformed in 5-(o-nitrobenzyl)-6-azauracil (III) by both oxidation, and methylation and hydrolysis of the 3-methylmercapto-6-(o-nitrobenzyl)-2,5-dihydro-1,2,4-triazin-5-one (V) formed. Reduction of derivative III with iron(II) hydroxide and cyclization of the amino derivative IV formed gives 2,3,4,10-tetrahydro-1,2,4-triazino[5,6-b]quinolin-3-one (VI). Compound VI is transformed in acid medium to 1-amino-1,2-dihydroimidazo[4,5-b]quinolin-2-one (VIII) via the tautomer VII, and in boiling acetic acid it gives the acetylamino derivative IX. The N-amino derivative VIII reacts with carbonyl compounds to give the corresponding hydrazones X - XII, and its nitrosation gives 1,2-dihydroimidazo[4,5-b]quinolin-2-one (XIII).

Organic material dissolved during oxygen-alkali pulping of hot water extracted birch sawdust

TAPPI Journal ◽  
2015 ◽  
Vol 14 (4) ◽  
pp. 237-244 ◽  
Author(s):  
JONI LEHTO ◽  
RAIMO ALÉN
Keyword(s):  
Acetic Acid ◽  
Betula Pendula ◽  
Cooking Time ◽  
Hot Water ◽  
Partial Hydrolysis ◽  
Chemical Pulping ◽  
Black Liquors ◽  
Aliphatic Carboxylic Acids ◽  
Hydrolysis Of ◽  
Cooking Conditions

Untreated and hot water-treated birch (Betula pendula) sawdust were cooked by the oxygen-alkali method under the same cooking conditions (temperature = 170°C, liquor-to-wood ratio = 5 L/kg, and 19% sodium hydroxide charge on the ovendry sawdust). The pretreatment of feedstock clearly facilitated delignification. After a cooking time of 90 min, the kappa numbers were 47.6 for the untreated birch and 10.3 for the hot water-treated birch. Additionally, the amounts of hydroxy acids in black liquors based on the pretreated sawdust were higher (19.5-22.5g/L) than those in the untreated sawdust black liquors (14.8-15.5 g/L). In contrast, in the former case, the amounts of acetic acid were lower in the pretreated sawdust (13.3-14.8 g/L vs. 16.9-19.1 g/L) because the partial hydrolysis of the acetyl groups in xylan already took place during the hot water extraction of feedstock. The sulfur-free fractions in the pretreatment hydrolysates (mainly carbohydrates and acetic acid) and in black liquors (mainly lignin and aliphatic carboxylic acids) were considered as attractive novel byproducts of chemical pulping.

A FACILE SYNTHESIS AND REACTIONS OF AMINO SELENOLO[2,3-b]PYRIDINE CARBOXYLATE

2015 ◽  
Vol 12 (1) ◽  
pp. 3910-3918 ◽  
Author(s):  
Dr Remon M Zaki ◽  
Prof Adel M. Kamal El-Dean ◽  
Dr Nermin A Marzouk ◽  
Prof Jehan A Micky ◽  
Mrs Rasha H Ahmed
Keyword(s):  
Biological Activity ◽  
Carbonyl Compounds ◽  
Mass Spectra ◽  
The Other ◽  
Pyridine Derivatives ◽  
Facile Synthesis ◽  
High Biological Activity ◽  
Basic Hydrolysis ◽  
Pyridine Carboxylate ◽  
Hydrolysis Of

 Incorporating selenium metal bonded to the pyridine nucleus was achieved by the reaction of selenium metal with 2-chloropyridine carbonitrile 1 in the presence of sodium borohydride as reducing agent. The resulting non isolated selanyl sodium salt was subjected to react with various α-halogenated carbonyl compounds to afford the selenyl pyridine derivatives 3a-f  which compounds 3a-d underwent Thorpe-Ziegler cyclization to give 1-amino-2-substitutedselenolo[2,3-b]pyridine compounds 4a-d, while the other compounds 3e,f failed to be cyclized. Basic hydrolysis of amino selenolo[2,3-b]pyridine carboxylate 4a followed by decarboxylation furnished the corresponding amino selenolopyridine compound 6 which was used as a versatile precursor for synthesis of other heterocyclic compound 7-16. All the newly synthesized compounds were established by elemental and spectral analysis (IR, 1H NMR) in addition to mass spectra for some of them hoping these compounds afforded high biological activity.

scholarly journals Oxidation of Aliphatic Secondary and Benzylic Alcohols to Carbonyl Compounds by Peracetic Acid in the Presence of Sodium Bromide in Acetic Acid

1987 ◽  
Vol 60 (11) ◽  
pp. 4143-4144 ◽  
Author(s):  
Takashi Morimoto ◽  
Masao Hirano ◽  
Hiroyuki Ashiya ◽  
Hidetaka Egashira ◽  
Xiumin Zhuang
Keyword(s):  
Acetic Acid ◽  
Peracetic Acid ◽  
Carbonyl Compounds ◽  
Sodium Bromide ◽  
Benzylic Alcohols

The synthesis of norbornanes with functionalized carbon substituents at a bridgehead. 1-(3-Oxonorborn-1-yl)ethanone and 1-(3-oxonorborn-1-yl)-2-propanone

1992 ◽  
Vol 70 (5) ◽  
pp. 1492-1505 ◽  
Author(s):  
Peter Yates ◽  
Magdy Kaldas
Keyword(s):  
Acetic Acid ◽  
Carboxylic Acid ◽  
Hydrogen Bromide ◽  
Tertiary Alcohol ◽  
Ethyl Bromoacetate ◽  
Second Molar ◽  
Molar Equivalent ◽  
Acid Lactone ◽  
Basic Hydrolysis ◽  
Hydrolysis Of

Treatment of 2-norobornene-1-carboxylic acid (7) with one equivalent of methyllithium in ether followed by a second molar equivalent after dilution with tetrahydrofuran gave 1-(norborn-2-en-lyl)ethanone (10) and only a trace of the tertiary alcohol 11. Reaction of 7 with formic acid followed by hydrolysis gave a 4:3 mixture of exo-3- and exo-2-hydroxynorbornane-1-carboxylic acid (16 and 17), whereas oxymercuration–demercuration gave only the exo-3-hydroxy isomer 16. Oxidation of 16 and 17 gave 3- and 2-oxonorbornane-1-carboxylic acid (27 and 29), respectively. Oxymercuration–demercuration of 10 gave exclusively 1-(exo-3-hydroxynorborn-1-yl)ethanone (30), which was also prepared by treatment of 16 with methyllithium in analogous fashion to that used for the conversion of 7 to 10. Oxidation of 30 gave 1-(3-oxonorborn-1-yl)ethanone (1). Dehydrobromination of exo-2-bromonorbornane-1-acetic acid and dehydration of 2-hydroxy-norbornane-2-acetic acid derivatives gave 1-(norborn-2-ylidene) acetic acid derivatives to the exclusion of norborn-2-ene-1 -acetic acid derivatives. Treatment of exo-5-acetyloxy-2-norobornanone (52) with ethyl bromoacetate and zinc gave ethyl exo-5-acetyloxy-2-hydroxynorbornane-(exo- and endo-2-acetate (53 and 54). Reaction of 53 with hydrogen bromide gave initially ethyl endo-3-acetyloxy-exo-6-bromonorbornane-1-acetate (59), which was subsequently converted to a mixture of 59 and its exo-3-acetyloxy epimer 61. Catalytic hydrogenation of this mixture gave a mixture of ethyl endo- and exo-3-acetyloxynorbornane-1 -acetate (62 and 63). Basic hydrolysis of this gave a mixture of the corresponding hydroxy acids, 70 and 71; the former was slowly converted to the latter at pH 5. Oxidation of the mixture of 70 and 71 gave 3-oxonorbornane-1-acetic acid (72). Treatment of the mixture with methyllithium as for 16 gave a mixture of 1-(endo- and exo-3-hydroxynorborn-1-yl)-2-propanone (73 and 74), which was oxidized to 1-(3-oxo-norborn-1-yl)-2-propanone (2). Reaction of exo-2-hydroxynorbornane-1-acetic acid lactone (75) with methyllithium in ether gave (1-(exo-2-hydroxynorborn-1-yl)-2-propanone (76), which on oxidation gave the 2-oxo isomer 78 of 2.

Micro-determination of pyrrole derivatives with N-bromosuccinimide in acetic acid medium

The Analyst ◽  
1976 ◽  
Vol 101 (1208) ◽  
pp. 867
Author(s):  
J. P. Sharma ◽  
V. K. S. Shukla ◽  
A. K. Dubey
Keyword(s):  
Acetic Acid ◽  
Acid Medium ◽  
Acetic Acid Medium ◽  
Pyrrole Derivatives

scholarly journals Perborate Oxidation of Substituted 5-Oxoacids in Aqueous Acetic Acid Medium: A Kinetic and Mechanistic Study

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
S. Shree Devi ◽  
B. Muthukumaran ◽  
P. Krishnamoorthy
Keyword(s):  
Acetic Acid ◽  
Acid Medium ◽  
Reaction Rate ◽  
Reaction Medium ◽  
Activation Parameters ◽  
Reaction Rates ◽  
Mechanistic Study ◽  
Aqueous Acetic Acid ◽  
Sodium Perborate ◽  
Acetic Acid Medium

Kinetics and mechanism of oxidation of substituted 5-oxoacids by sodium perborate in aqueous acetic acid medium have been studied. The reaction exhibits first order both in [perborate] and [5-oxoacid] and second order in [H+]. Variation in ionic strength has no effect on the reaction rate, while the reaction rates are enhanced on lowering the dielectric constant of the reaction medium. Electron releasing substituents in the aromatic ring accelerate the reaction rate and electron withdrawing substituents retard the reaction. The order of reactivity among the studied 5-oxoacids is p-methoxy ≫ p-methyl > p-phenyl > –H > p-chloro > p-bromo > m-nitro. The oxidation is faster than H2O2 oxidation. The formation of H2BO3+ is the reactive species of perborate in the acid medium. Activation parameters have been evaluated using Arrhenius and Eyring’s plots. A mechanism consistent with the observed kinetic data has been proposed and discussed. Based on the mechanism a suitable rate law is derived.

Improved synthesis of anti-sesquinorbornene

1984 ◽  
Vol 62 (9) ◽  
pp. 1840-1844 ◽  
Author(s):  
Karl R. Kopecky ◽  
Alan J. Miller
Keyword(s):  
Acetic Acid ◽  
Sulfuric Acid ◽  
Carboxylic Acid ◽  
Lead Tetraacetate ◽  
Carboxyl Group ◽  
Silver Acetate ◽  
Benzenesulfonyl Chloride ◽  
Methoxide Ion ◽  
Hydrolysis Of ◽  
Monomethyl Ester

Treatment of methyl hydrogen decahydro-1,4:5,8-exo,endo-dimethanonaphthalene-4a,8a-dicarboxylate with lead tetraacetate in benzene – acetic acid replaces the carboxyl group by an acetoxy group. Hydrolysis of this product with 25% sulfuric acid at 130 °C forms 8a-hydroxydecahydro-1,4:5,8-exo,endo-dimethanonaphthalene-4a-carboxylic acid 10. The reaction between 10 and benzenesulfonyl chloride in pyridine containing triethylamine at 95 °C produces anti-sesquinorbornene 1 in 34% yield. In the absence of triethylamine 1 is converted to the hydrochloride. The iodohydroperoxide of 1 is converted by silver acetate at 0 °C to the diketone in a luminescent reaction. The 1,2-dioxetane could not be isolated. Decahydro-1,4:5,8-exo,exo-dimethanonaphthalene-4a,8a-dicarboxylic anhydride is converted slowly by methoxide ion in methanol at 150 °C to the monomethyl ester which then undergoes demethylation. The isomeric exo,endo anhydride undergoes reaction readily with methoxide ion at 80 °C.

scholarly journals Fabrication of TiO2/Carbon Photocatalyst using Submerged DC Arc Discharged in Ethanol/Acetic Acid Medium

2017 ◽  
Vol 202 ◽  
pp. 012058 ◽  
Author(s):  
T E Saraswati ◽  
A O Nandika ◽  
I F Andhika ◽  
Patiha ◽  
C Purnawan ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Acid Medium ◽  
Acetic Acid Medium ◽  
Ethanol Acetic Acid ◽  
Dc Arc
Sign in / Sign up

Export Citation Format

Share Document