CW-CO2 laser-induced and SF6-sensitized decomposition of trifluoroacetic anhydride

1981 ◽  
Vol 46 (11) ◽  
pp. 2860-2864 ◽  
Author(s):  
Josef Pola
Keyword(s):  
Thermal Stability ◽  
Trifluoroacetic Acid ◽  
Heterogeneous Reaction ◽  
Thermal Conditions ◽  
Trifluoroacetic Anhydride ◽  
Conventional Heating ◽  
Kinetics Of ◽  
Relative Thermal Stability ◽  
Induced Reaction ◽  
Carbonyl Fluoride

CW-CO2 laser-induced and SF6-sensitized decomposition of trifluoroacetic anhydride affords carbonyl fluoride, carbon monoxide and trifluoroacetyl fluoride, the products different from those given by a conventional heating. The products and the kinetics of the laser-induced reaction reflect a different behaviour of presumably formed transient .CF2CO2. biradical under conditions precluding heterogeneous reaction on the reactor walls and point out that the fate of the .CF2CO2. species formed during the laser-powered homogeneous pyrolysis of trifluoroacetic acid and that of trifluoroacetic anhydride is under these conditions identical. The reverse order of thermal stability for trifluoroacetic acid and trifluoroacetic anhydride observed during the conventional and laser-induced pyrolysis suggests the laser-powered homogeneous process as a tool for modification of compounds' (relative) thermal stability ascertained under conventional thermal conditions including participation of heterogeneous surface reactions.

CW-CO2 laser-induced and SF6-sensitized decomposition of trifluoroacetic acid

1981 ◽  
Vol 46 (11) ◽  
pp. 2854-2859 ◽  
Author(s):  
Josef Pola
Keyword(s):  
Trifluoroacetic Acid ◽  
Surface Reaction ◽  
Reaction Scheme ◽  
Conventional Heating ◽  
Reaction Products ◽  
First Order ◽  
Cw Co2 Laser ◽  
Kinetics Of ◽  
Induced Reaction ◽  
Carbonyl Fluoride

CW-CO2 laser-induced and SF6-sensitized decomposition of trifluoroacetic acid affords reaction products different from those yielded by a conventional heating and offers a new way for decomposition of this compound. The kinetics of the laser-induced reaction is also different, being of a second order and of a first order in SF6. The reaction scheme proposed for the laser-induced process shows .CF2CO2. biradical to be mainly decomposed to carbon monoxide and carbonyl fluoride and implies that the fate of this species during conventional thermal decomposition is controlled by heterogeneous surface reaction.

The Ordered Phase Formation in Ti-Al-Ga Alloys

1970 ◽  
Vol 28 ◽  
pp. 440-441
Author(s):  
Shiro Fujishiro ◽  
Harold L. Gegel
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Titanium Alloys ◽  
Growth Kinetics ◽  
Stoichiometric Composition ◽  
Good Potential ◽  
Alpha Titanium ◽  
Cold Rolled ◽  
Kinetics Of ◽  
Thermal Stability Of

Ordered-alpha titanium alloys having a DO19 type structure have good potential for high temperature (600°C) applications, due to the thermal stability of the ordered phase and the inherent resistance to recrystallization of these alloys. Five different Ti-Al-Ga alloys consisting of equal atomic percents of aluminum and gallium solute additions up to the stoichiometric composition, Ti3(Al, Ga), were used to study the growth kinetics of the ordered phase and the nature of its interface.The alloys were homogenized in the beta region in a vacuum of about 5×10-7 torr, furnace cooled; reheated in air to 50°C below the alpha transus for hot working. The alloys were subsequently acid cleaned, annealed in vacuo, and cold rolled to about. 050 inch prior to additional homogenization

Effects of salts on the kinetics of oxidation of alkenes by thallic salts in aqueous solutions

1981 ◽  
Vol 46 (3) ◽  
pp. 693-700 ◽  
Author(s):  
Milan Strašák ◽  
Jaroslav Majer
Keyword(s):  
Aqueous Solutions ◽  
Phase Transfer ◽  
Heterogeneous Reaction ◽  
Qualitative Model ◽  
Kinetic Effect ◽  
Tetraalkylammonium Salts ◽  
Reaction Conditions ◽  
Kinetics Of Oxidation ◽  
Kinetics Of ◽  
Heterogeneous Reaction Conditions

The kinetics of oxidation of alkenes by thallic sulphate in aqueous solutions, involving the two reaction steps-the hydroxythallation and the dethallation - was studied, and the effect of salts on the kinetics was examined; this made it possible to specify more precisely the reaction mechanism and to suggest a qualitative model of the reaction coordinate. It was found that in homogeneous as well as in heterogeneous reaction conditions, the reaction can be accelerated appreciably by adding tetraalkylammonium salts. These salts not only operate as catalysts of the phase transfer, but also exert a significant kinetic effect, which can be explained with a simplification in terms of a stabilization of the transition state of the reaction.

scholarly journals Thermal Degradation Kinetics and Modeling Study of Ultra High Molecular Weight Polyethylene (UHMWP)/Graphene Nanocomposite

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1597
Author(s):  
Iman Jafari ◽  
Mohamadreza Shakiba ◽  
Fatemeh Khosravi ◽  
Seeram Ramakrishna ◽  
Ehsan Abasi ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Molecular Weight ◽  
Thermal Degradation ◽  
High Molecular Weight ◽  
Degradation Kinetics ◽  
Graphene Nanosheets ◽  
Thermal Degradation Kinetics ◽  
Graphene Nanocomposites ◽  
Kinetics Of ◽  
Ultra High Molecular Weight

The incorporation of nanofillers such as graphene into polymers has shown significant improvements in mechanical characteristics, thermal stability, and conductivity of resulting polymeric nanocomposites. To this aim, the influence of incorporation of graphene nanosheets into ultra-high molecular weight polyethylene (UHMWPE) on the thermal behavior and degradation kinetics of UHMWPE/graphene nanocomposites was investigated. Scanning electron microscopy (SEM) analysis revealed that graphene nanosheets were uniformly spread throughout the UHMWPE’s molecular chains. X-Ray Diffraction (XRD) data posited that the morphology of dispersed graphene sheets in UHMWPE was exfoliated. Non-isothermal differential scanning calorimetry (DSC) studies identified a more pronounced increase in melting temperatures and latent heat of fusions in nanocomposites compared to UHMWPE at lower concentrations of graphene. Thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) revealed that UHMWPE’s thermal stability has been improved via incorporating graphene nanosheets. Further, degradation kinetics of neat polymer and nanocomposites have been modeled using equations such as Friedman, Ozawa–Flynn–Wall (OFW), Kissinger, and Augis and Bennett’s. The "Model-Fitting Method” showed that the auto-catalytic nth-order mechanism provided a highly consistent and appropriate fit to describe the degradation mechanism of UHMWPE and its graphene nanocomposites. In addition, the calculated activation energy (Ea) of thermal degradation was enhanced by an increase in graphene concentration up to 2.1 wt.%, followed by a decrease in higher graphene content.

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

scholarly journals Shear-induced reaction-limited aggregation kinetics of Brownian particles at arbitrary concentrations

2010 ◽  
Vol 132 (13) ◽  
pp. 134903 ◽  
Author(s):  
Alessio Zaccone ◽  
Daniele Gentili ◽  
Massimo Morbidelli
Keyword(s):  
Aggregation Kinetics ◽  
Brownian Particles ◽  
Kinetics Of ◽  
Induced Reaction

scholarly journals Thermal Stability and Decomposition Kinetics of 1-Alkyl-2,3-Dimethylimidazolium Nitrate Ionic Liquids: TGA and DFT Study

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2560
Author(s):  
Jianwen Meng ◽  
Yong Pan ◽  
Fan Yang ◽  
Yanjun Wang ◽  
Zhongyu Zheng ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Density Functional Theory ◽  
Ionic Liquids ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Nitrogen Atmosphere ◽  
Decomposition Kinetics ◽  
Heating Rates ◽  
Functional Theory ◽  
Kinetics Of

The thermal stability and decomposition kinetics analysis of 1-alkyl-2,3-dimethylimidazole nitrate ionic liquids with different alkyl chains (ethyl, butyl, hexyl, octyl and decyl) were investigated by using isothermal and nonisothermal thermogravimetric analysis combined with thermoanalytical kinetics calculations (Kissinger, Friedman and Flynn-Wall-Ozawa) and density functional theory (DFT) calculations. Isothermal experiments were performed in a nitrogen atmosphere at 240, 250, 260 and 270 °C. In addition, the nonisothermal experiments were carried out in nitrogen and air atmospheres from 30 to 600 °C with heating rates of 5, 10, 15, 20 and 25 °C/min. The results of two heating modes, three activation energy calculations and density functional theory calculations consistently showed that the thermal stability of 1-alkyl-2,3-dimethylimidazolium nitrate ionic liquids decreases with the increasing length of the alkyl chain of the substituent on the cation, and then the thermal hazard increases. This study could provide some guidance for the safety design and use of imidazolium nitrate ionic liquids for engineering.

Sign in / Sign up

Export Citation Format

Share Document