Study of properties of copper-modified platinum catalysts

1981 ◽  
Vol 46 (8) ◽  
pp. 1958-1964 ◽  
Author(s):  
Libor Červený ◽  
Ivo Paseka ◽  
Vladimír Stuchlý ◽  
Vlastimil Růžička
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Platinum Catalysts ◽  
Platinum Black ◽  
Platinum Surface ◽  
Hydrogen Stream

The properties of catalysts based on platinum black modified with copper were studied. The free platinum surface area and the amount of the surface copper were determined by potentiodynamic measurements; the isosteric heats of hydrogen adsorption were also measured. The catalysts were tested in gas phase dehydrogenation of cyclohexanol; after the reaction, and also after mere thermal exposition of the catalyst to hydrogen stream, the surface of the catalysts was re-examined.

scholarly journals Rugae-like FeP nanocrystal assembly on a carbon cloth: an exceptionally efficient and stable cathode for hydrogen evolution

Nanoscale ◽  
2015 ◽  
Vol 7 (25) ◽  
pp. 10974-10981 ◽  
Author(s):  
Xiulin Yang ◽  
Ang-Yu Lu ◽  
Yihan Zhu ◽  
Shixiong Min ◽  
Mohamed Nejib Hedhili ◽  
...  
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Hydrogen Evolution ◽  
Hydrogen Generation ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Efficiency ◽  
Carbon Cloth ◽  
Nanocrystal Assembly

High surface area FeP nanosheets on a carbon cloth were prepared by gas phase phosphidation of electroplated FeOOH, which exhibit exceptionally high catalytic efficiency and stability for hydrogen generation.

scholarly journals Study of deactivation in mesocellular foam carbon (MCF-C) catalyst used in gas-phase dehydrogenation of ethanol

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoottapong Klinthongchai ◽  
Seeroong Prichanont ◽  
Piyasan Praserthdam ◽  
Bunjerd Jongsomjit
Keyword(s):  
Catalytic Activity ◽  
Pore Size ◽  
Gas Phase ◽  
Surface Area ◽  
Active Sites ◽  
Operating Temperature ◽  
Coke Formation ◽  
Ethanol Conversion ◽  
Deactivation Of Catalyst ◽  
Dehydrogenation Of Ethanol

AbstractMesocellular foam carbon (MCF-C) is one the captivating materials for using in gas phase dehydrogenation of ethanol. Extraordinary, enlarge pore size, high surface area, high acidity, and spherical shape with interconnected pore for high diffusion. In contrary, the occurrence of the coke is a majority causes for inhibiting the active sites on catalyst surface. Thus, this study aims to investigate the occurrence of the coke to optimize the higher catalytic activity, and also to avoid the coke formation. The MCF-C was synthesized and investigated using various techniques. MCF-C was spent in gas-phase dehydrogenation of ethanol under mild conditions. The deactivation of catalyst was investigated toward different conditions. Effects of reaction condition including different reaction temperatures of 300, 350, and 400 °C on the deactivation behaviors were determined. The results indicated that the operating temperature at 400 °C significantly retained the lowest change of ethanol conversion, which favored in the higher temperature. After running reaction, the physical properties as pore size, surface area, and pore volume of spent catalysts were decreased owing to the coke formation, which possibly blocked the pore that directly affected to the difficult diffusion of reactant and caused to be lower in catalytic activity. Furthermore, a slight decrease in either acidity or basicity was observed owing to consumption of reactant at surface of catalyst or chemical change on surface caused by coke formation. Therefore, it can remarkably choose the suitable operating temperature to avoid deactivation of catalyst, and then optimize the ethanol conversion or yield of acetaldehyde.

scholarly journals Chemical modification of the polymer of intrinsic microporosity PIM-1 for enhanced hydrogen storage

Adsorption ◽  
2020 ◽  
Vol 26 (7) ◽  
pp. 1083-1091
Author(s):  
Mi Tian ◽  
Sébastien Rochat ◽  
Hamish Fawcett ◽  
Andrew D. Burrows ◽  
Christopher R. Bowen ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Sorption Properties ◽  
Bet Surface Area ◽  
Polymer Modification ◽  
Gas Sorption ◽  
Chemically Modified ◽  
Polymer Of Intrinsic Microporosity ◽  
Intrinsic Microporosity

Abstract A detailed investigation has been carried out of the pre-polymerisation modification of the polymer of intrinsic microporosity PIM-1 by the addition of two methyl (Me) groups to its spirobisindane unit to create a new chemically modified PIM-1 analogue, termed MePIM. Our work explores the effects of this modification on the porosity of PIM-1 and hence on its gas sorption properties. MePIM was successfully synthesised using either low (338 K) or high (423 K) temperature syntheses. It was observed that introduction of methyl groups to the spirobisindane part of PIM-1 generates additional microporous spaces, which significantly increases both surface area and hydrogen storage capacity. The BET surface area (N2 at 77 K) was increased by ~ 12.5%, resulting in a ~ 25% increase of hydrogen adsorption after modification. MePIM also maintains the advantages of good processability and thermal stability. This work provides new insights on a facile polymer modification that enables enhanced gas sorption properties.

Hydrogen adsorption on high surface area Cr2 O3 materials

2013 ◽  
Vol 210 (9) ◽  
pp. 1920-1924 ◽  
Author(s):  
Jinglian Fan ◽  
Yongxiang Cheng ◽  
Zunyun Xie ◽  
Lingyun Jin ◽  
Gengshen Hu ◽  
...  
Keyword(s):  
Surface Area ◽  
Hydrogen Adsorption ◽  
High Surface ◽  
High Surface Area

In situ determination of the electrochemically active platinum surface area: key to improvement of solid acid fuel cells

2018 ◽  
Vol 6 (6) ◽  
pp. 2700-2707 ◽  
Author(s):  
Felix P. Lohmann-Richters ◽  
Bernd Abel ◽  
Áron Varga
Keyword(s):  
Fuel Cells ◽  
Solid Electrolyte ◽  
Surface Area ◽  
Solid Acid ◽  
Oxide Reduction ◽  
Electrolyte System ◽  
Platinum Surface ◽  
Electrochemically Active

Surface oxide reduction is demonstrated for measuring the active Pt surface area in a solid electrolyte system at 240 °C.

scholarly journals Plasma Catalysis: Distinguishing between Thermal and Chemical Effects

Catalysts ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 185 ◽  
Author(s):  
Guido Giammaria ◽  
Gerard van Rooij ◽  
Leon Lefferts
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Thermal Effects ◽  
External Surface ◽  
Plasma Chemistry ◽  
Internal Surface ◽  
Plasma Power ◽  
External Surface Area ◽  
Internal Surface Area ◽  
Chemical Effects

The goal of this study is to develop a method to distinguish between plasma chemistry and thermal effects in a Dielectric Barrier Discharge nonequilibrium plasma containing a packed bed of porous particles. Decomposition of CaCO3 in Ar plasma is used as a model reaction and CaCO3 samples were prepared with different external surface area, via the particle size, as well as with different internal surface area, via pore morphology. Also, the effect of the CO2 in gas phase on the formation of products during plasma enhanced decomposition is measured. The internal surface area is not exposed to plasma and relates to thermal effect only, whereas both plasma and thermal effects occur at the external surface area. Decomposition rates were in our case found to be influenced by internal surface changes only and thermal decomposition is concluded to dominate. This is further supported by the slow response in the CO2 concentration at a timescale of typically 1 minute upon changes in discharge power. The thermal effect is estimated based on the kinetics of the CaCO3 decomposition, resulting in a temperature increase within 80 °C for plasma power from 0 to 6 W. In contrast, CO2 dissociation to CO and O2 is controlled by plasma chemistry as this reaction is thermodynamically impossible without plasma, in agreement with fast response within a few seconds of the CO concentration when changing plasma power. CO forms exclusively via consecutive dissociation of CO2 in the gas phase and not directly from CaCO3. In ongoing work, this methodology is used to distinguish between thermal effects and plasma–chemical effects in more reactive plasma, containing, e.g., H2.

scholarly journals Pinecone-Derived Activated Carbons as an Effective Medium for Hydrogen Storage

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2237
Author(s):  
Sara Stelitano ◽  
Giuseppe Conte ◽  
Alfonso Policicchio ◽  
Alfredo Aloise ◽  
Giovanni Desiderio ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Hydrogen Storage ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Textural Properties ◽  
Biomass Waste ◽  
Wavelength Dispersive Spectrometry

Pinecones, a common biomass waste, has an interesting composition in terms of cellulose and lignine content that makes them excellent precursors in various activated carbon production processes. The synthesized, nanostructured, activated carbon materials show textural properties, a high specific surface area, and a large volume of micropores, which are all features that make them suitable for various applications ranging from the purification of water to energy storage. Amongst them, a very interesting application is hydrogen storage. For this purpose, activated carbon from pinecones were prepared using chemical activation with different KOH/precursor ratios, and their hydrogen adsorption capacity was evaluated at liquid nitrogen temperatures (77 K) at pressures of up to 80 bar using a Sievert’s type volumetric apparatus. Regarding the comprehensive characterization of the samples’ textural properties, the measurement of the surface area was carried out using the Brunauer–Emmett–Teller method, the chemical composition was investigated using wavelength-dispersive spectrometry, and the topography and long-range order was estimated using scanning electron microscopy and X-ray diffraction, respectively. The hydrogen adsorption properties of the activated carbon samples were measured and then fitted using the Langmuir/ Töth isotherm model to estimate the adsorption capacity at higher pressures. The results showed that chemical activation induced the formation of an optimal pore size distribution for hydrogen adsorption centered at about 0.5 nm and the proportion of micropore volume was higher than 50%, which resulted in an adsorption capacity of 5.5 wt% at 77 K and 80 bar; this was an increase of as much as 150% relative to the one predicted by the Chahine rule.

Characterization of Pacemaker Electrode Surfaces Utilizing Scanning Electron Microscopy (SEM) and In-Vitro Electrochemical Analysis

1999 ◽  
Vol 5 (S2) ◽  
pp. 402-403
Author(s):  
Scott Brabec ◽  
Bill Schindeldecker ◽  
Ken Brennen ◽  
Sue Okerstrom ◽  
Ky Pham
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Impedance Spectrum ◽  
Sample Surface ◽  
Electrochemical Analysis ◽  
Platinum Black ◽  
Conductive Surface ◽  
Scanning Electron

The efficiency of implantable electrodes for cardiac pacing depends on the ratio of the conductive surface area to the geometric area of the interface with excitable tissue. New models of heart pacers require reduction of post-pulse polarization, i.e. the potential left on the electrode / tissue interface after a pacemaker pulse. Increasing the conductive surface area is an effective method to this end. Microscopy provides an important tool in elucidating the role of surface structure in electrode performance.Three different surface textures were characterized on a 90% platinum(Pt)/10% iridium (Ir) polished electrode substrate of roughly 5 mm2 geometric surface area. These consisted of the polished substrate itself, a thin film of textured platinum in the 1-3 micron size range, and a sub-micron platinum black coating. Sample surface effects were characterized via scanning electron microscopy (SEM), in-vitro electrical impedance spectrum analysis, and polarization after-potential measurements.

The Adsorption, Desorption, and Exchange Reactions of Oxygen, Hydrogen, and Water on Platinum Surfaces. II. Hydrogen Adsorption, Exchange, and Equilibration

1975 ◽  
Vol 53 (2) ◽  
pp. 298-306 ◽  
Author(s):  
Y. K. Peng ◽  
P. T. Dawson
Keyword(s):  
Hydrogen Adsorption ◽  
Surface Composition ◽  
Co Adsorption ◽  
Exchange Reactions ◽  
Platinum Surface ◽  
Polycrystalline Platinum ◽  
Platinum Surfaces ◽  
Exponential Factors ◽  
Apparent Activation Energies ◽  
Adsorption Desorption

The adsorption, desorption, exchange, and equilibration reactions of hydrogen and deuterium on a platinum filament have been investigated by thermal desorption mass spectrometry. A surface saturated with hydrogen at 120 °K has a coverage 4.2 × 1014 molecules cm−2 and gives desorption spectra with four distinct peaks: β1,(165 °K), β2(220 °K), β3(280 °K), and β4(350 °K). Apparent activation energies and pre-exponential factors were determined for the β2-, β3-, and β4-peaks. For both co-adsorption and sequential adsorption of H2 and D2 the mass 2, 3, and 4 desorption spectra have identical shapes and the gas desorbs at equilibrium throughout. It is concluded that hydrogen adsorbs dissociatively. Exchange and equilibration were studied at 120, 210, and 285 °K by determining the surface composition and isotope distribution after varying fractions of preadsorbed H had been replaced. Following exchange at 120 °K the desorption spectra show a higher D content and a lack of equilibrium in the desorbing gas at low temperature. In most other experiments the mass 2,3, and 4 desorption spectra had identical shapes and the gas desorbed at equilibrium. The results are interpreted by a model which requires that the polycrystalline platinum surface is intrinsically heterogeneous. It appears that different mechanisms are unnecessary to interpret the differences in kinetics observed for exchange and equilibration at low temperatures.

Sign in / Sign up

Export Citation Format

Share Document