Adsorption equilibria of ethanol vapours on active carbon

1973 ◽  
Vol 38 (2) ◽  
pp. 321-327 ◽  
Author(s):  
A. Zukal ◽  
O. Kadlec
Keyword(s):  
Active Carbon ◽  
Adsorption Equilibria ◽  
Ethanol Vapours

PEMANFAATAN KARBON AKTIF UNTUK MENGURANGI CEMARAN FORMALIN PADA IKAN ASIN JAMBAL ROTI

2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Erma Ayu Nurcahyani ◽  
Merkuria Karyantina ◽  
Nanik Suhartatik
Keyword(s):  
Active Carbon ◽  
Food Preservation ◽  
Hazardous Substances ◽  
Salted Fish ◽  
Hazardous Chemical ◽  
The People ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Safe Food ◽  
Chemical Material

Ikan asin adalah metode untuk pengawetan makanan menggunakan kombinasi penggaraman dan pengeringan matahari. Di kalangan masyarakat, pembuatan ikan asin banyak menggunakan bahan kimia berbahaya seperti formalin. Penambahan bahan berbahaya mempengaruhi kualitas terutama keamanan. Makanan yang aman didefinisikan sebagai makanan yang terbebas dari cemaran biologi, kimia, mikrobiologi, yang dapat mempengaruhi kesehatan. Karbon aktif diduga bersifat polar yang mampu mengadsorpsi formalin. Tujuan penelitian ini adalah untuk mengetahui pengaruh pemberian karbon aktif dalam mengurangi cemaran formalin pada “jambal roti”. Rancangan percobaan yang digunakan untuk percobaan yaitu Rancangan Acak Lengkap (RAL) 2 faktorial, dengan faktor pertama yaitu konsentrasi karbon aktif 0, 3, dan 6% serta perlakuan kedua yaitu lama perebusan selama 5, 10, dan 15 menit. Penelitian ini dimulai dari pembuatan “jambal roti” dengan penambahan formalin dan perebusan dengan karbon aktif kemudian dianalisis uji kadar formalin, NaCl, protein, dan air. Hasil penelitian menunjukkan bahwa konsentrasi karbon aktif dan lama perebusan memberikan pengaruh yang signifikan pada kualitas jambal roti. Semakin tinggi konsentrasi karbon aktif dan lama perebusan maka semakin berkurangnya kadar formalin pada jambal roti. Hasil terbaik penelitian ini adalah karbon aktif 6% dan lama perebusan 15 menit. Menghasilkan formalin 3.21 ppm, NaCl 9.40%, protein 42.00%, dan air 30.02%. Kata kunci: Karbon Aktif, Formalin, Jambal Roti, Lama Perebusan. ABSTRACT                 Salted fish was a method for food preservation using combination of salting and sun drying. Among the people, the manufacture of salted fish use hazardous chemical material such as formaldehyde. The addition of hazardous substances affects the quality especially the safety. Safe food define as food that free from biological, chemical, microbiological contaminants that can affect health. Active carbon suspected to be polar which able to adsorb formaldehyde. The purpose of this research was to determine the influence of active carbon in reducing formaldehyde in salted fish “jambal roti”. The research used completely randomized design (CRD) with 2 factors, the first factor was the concentration of active carbon 0, 3, and 6% and the second was the boiling time (for 5, 10, and 15 min). This research was started from making “jambal roti” with the addition of formaldehyde and boiling with active carbon then analyzed for formaldehyde content, NaCl, protein, and moisture. The result showed that the concentration of active carbon and boiling time had a significant effect in quality salted fish “jambal roti”. The higher the concentration of active carbon and boiling time the more formaldehyde in “jambal roti” were removed. The best results of the research was 6% active carbon and 15 min of boiling time. Resulting 3.21 ppm of formaldehyde, 9.40% of NaCl, 42.00% of protein, and 30.02% of moisture. Keywords: Active Carbon, Formaldehyde, Jambal Roti, Boiling Time

Nano-silver active carbon fiber dressings improving bedsore wound healing in rats

2015 ◽  
Vol 36 (10) ◽  
pp. 1051 ◽  
Author(s):  
Ying WANG ◽  
Jian-xing SONG ◽  
Jiang-ping CHEN ◽  
Xiao-li LOU
Keyword(s):  
Wound Healing ◽  
Carbon Fiber ◽  
Active Carbon ◽  
Nano Silver

Analysis of the pore structure of adsorbents and its characterization by a numerical method

1984 ◽  
Vol 49 (12) ◽  
pp. 2721-2738 ◽  
Author(s):  
Ondřej Kadlec ◽  
Jerzy Choma ◽  
Helena Jankowska ◽  
Andrzej Swiatkowski
Keyword(s):  
Distribution Function ◽  
Pore Structure ◽  
Numerical Method ◽  
Active Carbon ◽  
Numerical Evaluation ◽  
Suggested Algorithm

This paper describes the algorithm of numerical evaluation of the parameters of the pore structure of adsorbents ( the micro, mezo and macropores). The structure of individual types of pores is described with the equation proposed by one of the present authors and giving the total distribution function of the pores with respect to their radii. The reliability of the suggested algorithm was verified in a number of calculations using a specially developed program. The results of the analysis and characterization of three different specimens of active carbon are shown as an example.

The Interfacial Behaviour of Mono-, Di-, and Triphosphate of Inosine at the Charged Interface

1996 ◽  
Vol 61 (11) ◽  
pp. 1600-1608
Author(s):  
Mohamed E. Ahmed
Keyword(s):  
Divalent Metal ◽  
Divalent Metal Ions ◽  
Adsorption Parameters ◽  
Buffer Solutions ◽  
Ph Values ◽  
Adsorption Equilibria ◽  
Charged Interface ◽  
Interfacial Behaviour ◽  
Phase Sensitive ◽  
Adsorption Stage

The interfacial behaviour and adsorption equilibria of mono-, di-, and triphosphate of inosine (IMP, IDP, and ITP) were carried out in different buffer solutions by phase-sensitive ac voltammetry at HMDE. The characteristic properties and adsorption parameters of dilute and compact layers were evaluated from the obtained Frumkin isotherm at different pH values. The effect of some divalent metal ions on the adsorption stage and association of the investigated compounds has been studied.

Investigation on a New Hydraulic Cementitious Binder Made from Phosphogypsum

2013 ◽  
Vol 864-867 ◽  
pp. 1923-1928
Author(s):  
Yue Xu ◽  
Jian Xi Li ◽  
Li Li Kan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Active Carbon ◽  
High Strength ◽  
Tricalcium Silicate ◽  
Dicalcium Silicate ◽  
Cementitious Material ◽  
Saturation Ratio ◽  
Tricalcium Aluminate ◽  
Cementitious Binder

A new kind of high strength cementitious material is made from phosphogypsum (PG), active carbon and fly-ash. Through the orthogonal research, it was showed that the calcination temperature, retention time, dosage of active carbon and fly ash on the compressive strength of cementitious binder are the most important. The result also showed that, in the conditions of temperature 1200°C, time retention 30 min, dosage of active carbon 10%, dosage of fly ash 5%, the compressive strength of the cementitious material for 3d and 28d could reach to 46.35MPa and 92.70MPa, the content of sulfur trioxide was 11.60% accordingly. A lot of active mineral materials, such as dicalcium silicate, tricalcium silicate, tricalcium aluminate were formed in the calcination. The C-S-H gel, calcium hydroxide and ettringite were found in 3d and 28d hydrates. It is found that the lime saturation ratio and silica modulus need to be control between 0.40~0.65 and 4~8 in order to produce high strength cementitious material.

scholarly journals Defect-induced B4C electrodes for high energy density supercapacitor devices

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Özge Balcı ◽  
Merve Buldu ◽  
Ameen Uddin Ammar ◽  
Kamil Kiraz ◽  
Mehmet Somer ◽  
...  
Keyword(s):  
Active Carbon ◽  
High Performance ◽  
Carbon Sources ◽  
High Energy ◽  
High Energy Density ◽  
Synthesis Conditions ◽  
High Energy Ball Mill ◽  
Energy Ball ◽  
G Ratio ◽  
Energy And Power Density

AbstractBoron carbide powders were synthesized by mechanically activated annealing process using anhydrous boron oxide (B2O3) and varying carbon (C) sources such as graphite and activated carbon: The precursors were mechanically activated for different times in a high energy ball mill and reacted in an induction furnace. According to the Raman analyses of the carbon sources, the I(D)/I(G) ratio increased from ~ 0.25 to ~ 0.99, as the carbon material changed from graphite to active carbon, indicating the highly defected and disordered structure of active carbon. Complementary advanced EPR analysis of defect centers in B4C revealed that the intrinsic defects play a major role in the electrochemical performance of the supercapacitor device once they have an electrode component made of bare B4C. Depending on the starting material and synthesis conditions the conductivity, energy, and power density, as well as capacity, can be controlled hence high-performance supercapacitor devices can be produced.

Sign in / Sign up

Export Citation Format

Share Document