On the matrix-effect in the excitation of the atomic emission spectra of magnesites

1965 ◽  
Vol 30 (4) ◽  
pp. 1303-1310 ◽  
Author(s):  
M. Matherny ◽  
N. Pliešovská ◽  
Ž. Rybárová
Keyword(s):  
Matrix Effect ◽  
Emission Spectra ◽  
Atomic Emission ◽  
The Matrix

Characterization of Amethysts from Sukamara, Central Kalimantan, Using Laser-Induced Breakdown Spectroscopy (LIBS)

2020 ◽  
Vol 1 (2) ◽  
pp. 5-8
Author(s):  
Komang Gde Suastika, Heri Suyanto, Gunarjo, Sadiana, Darmaji
Keyword(s):  
Emission Intensity ◽  
Laser Energy ◽  
Emission Spectra ◽  
Atomic Emission ◽  
Laser Induced Breakdown Spectroscopy ◽  
Chemical Formula ◽  
Central Kalimantan ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown

Abstract - Laser-Induced Breakdown Spectroscopy (LIBS) is one method of atomic emission spectroscopy using laser ablation as an energy source. This method is used to characterize the type of amethysts that originally come from Sukamara, Central Kalimantan. The result of amethyst characterization can be used as a reference for claiming the natural wealth of the amethyst. The amethyst samples are directly taken from the amethyst mining field in the District Gem Amethyst and consist of four color variations: white, black, yellow, and purple. These samples were analyzed by LIBS, using laser energy of 120 mJ, delay time detection of 2 μs and accumulation of 3, with and without cleaning. The purpose of this study is to determine emission spectra characteristics, contained elements, and physical characteristics of each amethyst sample. The spectra show that the amethyst samples contain some elements such as Al, Ca, K, Fe, Gd, Ba, Si, Be, H, O, N, Cl and Pu with various emission intensities. The value of emission intensity corresponds to concentration of element in the sample. Hence, the characteristics of the amethysts are based on their concentration value. The element with the highest concentration in all samples is Si, which is related to the chemical formula of SiO2. The element with the lowest concentration in all samples is Ca that is found in black and yellow amethysts. The emission intensity of Fe element can distinguish between white, purple, and yellow amethyst. If Fe emission intensity is very low, it indicates yellow sample. Thus, we may conclude that LIBS is a method that can be used to characterize the amethyst samples.Key words: amethyst, impurity, laser-induced, breakdown spectroscopy, characteristic, gemstones

A Modified QuEChERS Extraction and LC-MS/MS Method for the Determination of Pesticide Residues in Curry Leaves (Murraya koenigii)

2019 ◽  
Vol 6 (1) ◽  
pp. 30-41
Author(s):  
Ranjith Arimboor ◽  
Karunkara Ramakrishna Menon ◽  
Natarajan Ramesh Babu ◽  
Haneesh Chandran
Keyword(s):  
Sample Preparation ◽  
Matrix Effect ◽  
Retention Time ◽  
Pesticide Residues ◽  
Mobile Phase ◽  
Preparation Technique ◽  
Modified Quechers ◽  
Curry Leaves ◽  
Ms Analysis ◽  
The Matrix

Background:Increased consumer demand for curry leaves free from pesticides demands fast and reliable analytical methods for the analysis of pesticide residues.Objective:The optimization of a QuEChERS based sample preparation technique with improved analytical accuracy by removing interfering matrix components for LC-MS/MS analysis of pesticide residues from curry leaves.Methods:A modified QuEChERS solid phase extraction method was developed and validated for the analysis of 26 pesticides in fresh and dried curry leaves. The effects of the sample preparation steps and column retention time on the matrix suppression of analyte ions were also evaluated.Results:Validation parameters were found within an acceptable range. The matrix effect evaluation studies showed that the QuEChERS sample preparation was able to minimize the ion suppression of analytes due to co-eluting matrix of components and that a d-SPE clean up step had major role in reducing matrix effect. The gradient mobile phase with longer retention time for analytes resulted in comparatively lesser matrix effects than the isocratic mobile phase of non-polar nature. Even after the clean up, a considerable number of compounds had more than 20% reduction in their MS response in the gradient mobile phase.Conclusion:This study emphasized the need of proper sample clean up before a LC-MS/MS analysis and the usage of matrix matched standards and mobile phase that ultimately results in an appropriate analyte separation in reasonable retention times.

Evaluation of the matrix effect in the quantitative bio-oil analysis by gas chromatography

Fuel ◽  
2021 ◽  
Vol 290 ◽  
pp. 119866
Author(s):  
Eliane Lazzari ◽  
Érica A. Souza Silva ◽  
Thiago R. Bjerk ◽  
Jaderson K. Schneider ◽  
Elina Bastos Caramão
Keyword(s):  
Gas Chromatography ◽  
Matrix Effect ◽  
Oil Analysis ◽  
Bio Oil ◽  
The Matrix

scholarly journals Dilution of QuEChERS Extracts Without Cleanup Improves Results in the UHPLC-MS/MS Multiresidue Analysis of Pesticides in Tomato

2021 ◽  
Author(s):  
Fabiane M. Stringhini ◽  
Lucila C. Ribeiro ◽  
Graziela I. Rocha ◽  
Juliana D. de B. Kuntz ◽  
Renato Zanella ◽  
...  
Keyword(s):  
Matrix Effect ◽  
Practical Method ◽  
Analysis Method ◽  
Multiresidue Analysis ◽  
Limit Of Quantification ◽  
Chromatography Tandem Mass Spectrometry ◽  
The Matrix ◽  
Liquid Chromatography Tandem Mass ◽  
Ultrahigh Performance Liquid Chromatography ◽  
Positive Results

AbstractTomato is well-known to be one of the most cultivated and consumed vegetables worldwide and frequently contain pesticide residues. Therefore, a simple multiresidue method was established and validated to determine 129 pesticides and metabolites in tomato samples using a modified acetate QuEChERS without cleanup for sample preparation and determination by ultrahigh-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). Dilution of the raw extract in different proportions of mobile phase was evaluated and a dilution of 10 times presented adequate results improving analysis performance while minimizing the matrix effect. Validation performed according to SANTE guideline presented satisfactory results. Practical method limit of quantification was 0.01 mg kg−1 for most compounds. Recoveries between 70 and 120% with precision ≤ 20% were found for most compounds and spike levels evaluated. Matrix effect results were not significant for most part of compounds. Method proved to be simple, robust, and effective to be applied in routine analysis. Method applicability was performed by analysis of samples commercialized in Brazil and positive results were found demonstrating the importance of the proposed method.

ChemInform Abstract: Matrix Effect. Dimerization of Silylenes at 77 K in the Matrix.

ChemInform ◽  
1987 ◽  
Vol 18 (37) ◽  
Author(s):  
A. SEKIGUCHI ◽  
K. HAGIWARA ◽  
W. ANDO
Keyword(s):  
Matrix Effect ◽  
The Matrix

Creatine kinase 2 mass measurement: methods comparison and study of the matrix effect

1999 ◽  
Vol 288 (1-2) ◽  
pp. 111-119 ◽  
Author(s):  
Maribel Sánchez ◽  
Francesca Canalias ◽  
Teresa Palencia ◽  
F.-Javier Gella
Keyword(s):  
Creatine Kinase ◽  
Matrix Effect ◽  
Mass Measurement ◽  
Measurement Methods ◽  
Methods Comparison ◽  
The Matrix ◽  
Comparison And Study

ANALYSIS OF SOLDERS ON TIN AND LEAD BASES BY X-RAY FLOORESCENT SPECTROSCOPY

2021 ◽  
pp. 124-131
Author(s):  
A.V. Alekseev ◽  
◽  
G.V. Orlov ◽  
P.S. Petrov ◽  
A.V. Slavin ◽  
...  
Keyword(s):  
Emission Spectroscopy ◽  
High Resolution Mass Spectrometry ◽  
Analytical Signal ◽  
Atomic Emission ◽  
Standard Samples ◽  
X Ray ◽  
Fundamental Parameters ◽  
The Matrix ◽  
Resolution Mass

The determination of the elements Cu, Ni, Sb, Bi, Pb, Zn and Fe in the tin-based solder VPr35, as well as the elements Sn, Ni, Sb, Bi and In in the lead-based VPr40 solder by the method of х-ray fluorescence spectroscopy has been carried out. The calibration dependences are corrected taking into account the superposition of signals from interfering elements on the analytical signal and changes in intensity caused by inter-element influences in the matrix. The analysis was carried out by the method of fundamental parameters without using standard samples. The correctness of the results obtained was confirmed by their comparative analysis by atomic emission spectroscopy and high-resolution mass spectrometry with a glow discharge.

Sign in / Sign up

Export Citation Format

Share Document