scholarly journals Porphyry copper deposit formation in arcs: What are the odds?

Geosphere ◽  
2021 ◽  
Author(s):  
Jeremy P. Richards ◽  
Matthew Leybourne
Keyword(s):  
Hydrothermal Fluid ◽  
Subduction Zones ◽  
Porphyry Copper ◽  
Fluid Phase ◽  
Copper Deposit ◽  
Ore Deposits ◽  
Water Soluble ◽  
Cumulative Probability ◽  
High Threshold ◽  
Porphyry Cu

Arc magmas globally are H2O-Cl-S–rich and moderately oxidized (ΔFMQ = +1 to +2) relative to most other mantle-derived magmas (ΔFMQ ≤ 0). Their relatively high oxidation state limits the extent to which sulfide phases separate from the magma, which would otherwise tend to deplete the melt in chalcophile elements such as Cu (highly siderophile elements such as Au and especially platinum-group elements are depleted by even small amounts of sulfide segregation). As these magmas rise into the crust and begin to crystallize, they will reach volatile saturation, and a hydrous, saline, S-rich, moderately oxidized fluid is released, into which chalcophile and any remaining siderophile metals (as well as many other water-soluble elements) will strongly partition. This magmatic-hydrothermal fluid phase has the potential to form ore deposits (most commonly porphyry Cu ± Mo ± Au deposits) if its metal load is precipitated in economic concentrations, but there are many steps along the way that must be successfully negotiated before this can occur. This paper seeks to identify the main steps along the path from magma genesis to hydrothermal mineral precipitation that affect the chances of forming an ore deposit (defined as an economically mineable resource) and attempts to estimate the probability of achieving each step. The cumulative probability of forming a large porphyry Cu deposit at any given time in an arc magmatic system (i.e., a single batholith-linked volcanoplutonic complex) is estimated to be ~0.001%, and less than 1/10 of these deposits will be uplifted and exposed at shallow enough depths to mine economically (0.0001%). Continued uplift and ero­sion in active convergent tectonic regimes rapidly remove these upper-crustal deposits from the geological record, such that the probability of finding them in older arc systems decreases further with age, to the point that porphyry Cu deposits are almost nonexistent in Precambrian rocks. A key finding of this paper is that most volcanoplutonic arcs above subduction zones are prospective for porphyry ore formation, with prob­abilities only falling to low values at late stages of magmatic-hydrothermal fluid exsolution, focusing, and metal deposition. This is in part because of the high threshold required in terms of grade and tonnage for a deposit to be considered economic. Thus, the probability of forming a porphyry-type system in any given arc segment is relatively high, but the probability that it will be a large economic deposit is low, dictated to a large extent by mineral economics and metal prices.

scholarly journals Geological and Chronological Constraints on the Long-Lived Eocene Yulong Porphyry Cu-Mo Deposit, Eastern Tibet: Implications for the Lifespan of Giant Porphyry Cu Deposits

2017 ◽  
Vol 112 (7) ◽  
pp. 1719-1746 ◽  
Author(s):  
Jia Chang ◽  
Jian-Wei Li ◽  
David Selby ◽  
Jia-Cheng Liu ◽  
Xiao-Dong Deng
Keyword(s):  
Early Stage ◽  
Porphyry Copper ◽  
Copper Deposit ◽  
Granite Porphyry ◽  
Radiometric Dating ◽  
Time Interval ◽  
Porphyry Cu ◽  
Economic Significance ◽  
Vein Formation ◽  
Porphyry Cu Deposit

Abstract The Yulong porphyry Cu-Mo deposit, the third largest porphyry Cu deposit in China, contains proven reserves of > 6.5 million metric tons (Mt) Cu and 0.4 Mt Mo. Previous radiometric dating studies have provided numerous ages for this deposit, but the timing and duration of the process governing the deposition of Cu and Mo remains not well constrained. In this paper, we first document multiple stages of mineralization and hydrothermal alteration associated with distinct magmatic pulses at Yulong by field and textural relationships, and then present high-precision molybdenite Re-Os ages of 14 quartz-molybdenite ± chalcopyrite veins representing these stages to precisely constrain the timing and duration of Cu-Mo mineralization. The ore-hosting Yulong composite stock consists of three successive porphyry intrusions: (1) monzonitic granite porphyry (MGP), (2) K-feldspar granite porphyry (KGP), and (3) quartz albite porphyry (QAP). The vein formation, Cu-Mo mineralization, and ore-related alteration are grouped into early, transitional, and late stages with respect to the intrusive history. The first two porphyry intrusions are followed by cyclical sequences of veining that are mainly associated with potassic alteration and have formed (1) ME vein/USTT, (2) EBE/T veins, (3) A1E/T veins, (4) A2E/BT veins, and (5) A3E/T veins. A2E/BT and A3E/T veins of the early and transitional stages are dominated by quartz and chalcopyrite ± pyrite, respectively, and represent the main Cu-Mo mineralization events. More than 80% of Cu and Mo at Yulong were deposited in the early stage with the remainder being formed in the transitional stage. The late-stage pyrite-quartz veins (DL), which are characterized by sericitic alteration halos, postdate the intrusion of QAP dikes and have no economic significance. Molybdenite Re-Os ages of A2E and BT veins indicate that sulfide deposition at Yulong was episodic over a prolonged history lasting over 5.13 ± 0.23 m.y. (1σ). However, the bulk Cu-Mo ores formed in a shorter time interval of 1.36 ± 0.24 m.y. (1σ) with most Cu precipitated in a more restricted timespan of 0.82 ± 0.24 m.y. (1σ) in the early stage. These results, combined with geochronologic data from porphyry copper deposits elsewhere, confirm that multiple magmatic-hydrothermal pulses with a lifespan of tens to hundreds of thousands of years are sufficient to form a giant porphyry copper deposit. Factors such as metal concentration, volume, and focusing efficiency of ore-forming fluids could have played important roles in producing a giant porphyry Cu deposit regardless of a short- or long-lived magmatic-hydrothermal system.

scholarly journals Mapping Hydrothermal Zoning Pattern of Porphyry Cu Deposit Using Absorption Feature Parameters Calculated from ASTER Data

2019 ◽  
Vol 11 (14) ◽  
pp. 1729 ◽  
Author(s):  
Mengjuan Wu ◽  
Kefa Zhou ◽  
Quan Wang ◽  
Jinlin Wang
Keyword(s):  
Thermal Emission ◽  
Porphyry Copper ◽  
Copper Deposit ◽  
Geological Mapping ◽  
Systematic Sampling ◽  
Small Scale ◽  
Absorption Feature ◽  
Porphyry Cu ◽  
Feature Parameters ◽  
Porphyry Cu Deposit

Identifying hydrothermal zoning pattern associated with porphyry copper deposit is important for indicating its economic potential. Traditional approaches like systematic sampling and conventional geological mapping are time-consuming and labor extensive, and with limitations for providing small scale information. Recent developments suggest that remote sensing is a powerful tool for mapping and interpreting the spatial pattern of porphyry Cu deposit. In this study, we integrated in situ spectral measurement taken at the Yudai copper deposit in the Kalatag district, northwestern China, information obtained by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), as well as the spectra of samples (hand-specimen) measured using an Analytical Spectral Device (ASD) FieldSpec4 high-resolution spectrometer in laboratory, to map the hydrothermal zoning pattern of the copper deposit. Results proved that the common statistical approaches, such as relative band depth and Principle Component Analysis (PCA), were unable to identify the pattern accurately. To address the difficulty, we introduced a curve-fitting technique for ASTER shortwave infrared data to simulate Al(OH)-bearing, Fe/Mg(OH)-bearing, and carbonate minerals absorption features, respectively. The results indicate that the absorption feature parameters can effectively locate the ore body inside the research region, suggesting the absorption feature parameters have great potentials to delineate hydrothermal zoning pattern of porphyry Cu deposit. We foresee the method being widely used in the future.

Application of plurigaussian simulation to delineate the layout of alteration domains in Sungun copper deposit

2013 ◽  
Vol 5 (4) ◽  
Author(s):  
Hassan Talebi ◽  
Omid Asghari ◽  
Xavier Emery
Keyword(s):  
Numerical Models ◽  
Porphyry Copper ◽  
Copper Deposit ◽  
Ore Deposits ◽  
Accurate Estimation ◽  
Deterministic Models ◽  
Plurigaussian Simulation ◽  
Domain Boundaries ◽  
Drill Holes

AbstractAn accurate estimation of mineral grades in ore deposits with heterogeneous spatial variations requires defining geological domains that differentiate the types of mineralogy, alteration and lithology. Deterministic models define the layout of the domains based on the interpretation of the drill holes and do not take into account the uncertainty in areas with fewer data. Plurigaussian simulation (PGS) can be an alternative to generate multiple numerical models of the ore body, with the aim of assessing the uncertainty in the domain boundaries and improving the geological controls in the characterization of quantitative attributes. This study addresses the application of PGS to Sungun porphyry copper deposit (Iran), in order to simulate the layout of four hypogene alteration zones: potassic, phyllic, propylitic and argillic. The aim of this study is to construct numerical models in which the alteration structures reflect the evolution observed in the geology.

scholarly journals An abrupt switch in magmatic plumbing taps porphyry copper deposit-forming magmas

2021 ◽  
Author(s):  
Lawrence Carter ◽  
Simon Tapster ◽  
Ben Williamson ◽  
Yannick Buret ◽  
David Selby ◽  
...  
Keyword(s):  
Porphyry Copper ◽  
Copper Deposit ◽  
Ore Deposits ◽  
Green Technology ◽  
Ore Formation ◽  
Porphyry Deposits ◽  
Order Of Magnitude ◽  
Magmatic Plumbing System ◽  
Lower Crustal ◽  
Melt Evolution

Abstract Porphyry-type deposits are a vital source of green technology metals such as copper and molybdenum. They typically form in subduction-related settings from large, long-lived magmatic systems. The most widely accepted model for their formation requires that mantle-derived magmas undergo a multi-million year timescale ramp-up in volatiles and ore-forming constituents in mid- to lower-crustal reservoirs, however this does not explain why porphyry deposits are absent from the vast majority of arc magmatic systems. To address this, we have carried out geochemical and geochronological studies on the tilted, ~8 km depth equivalent, cross-section through the classic Yerington magmatic system, Nevada. Here we show that the magmas underwent a major and abrupt change in chemistry over a period of 100 kyrs which is coincident with the initiation of ore formation. This is attributed to a wholesale switch in the magmatic plumbing system whereby volatile-rich granitic melts were extracted from an estimated ~30 km depth and transported to shallow levels (~3-8 km) where exsolving fluids were focussed through highly permeable pathways to form porphyry deposits. The change in magma chemistry is documented across the entire plutonic to volcanic record. Its rapidity suggests that the increase in a magma’s ore-forming potential is not solely driven by tectonic factors, that occur over multi-million year scales, but through internal processes within the melt evolution zone, operating at more than an order of magnitude faster than previously envisaged. This short timescale narrows the temporal-geochemical footprint of magmas associated with porphyry mineralisation which will aid in targeting the next generation of ore deposits.

scholarly journals Using Whole Rock and Zircon Geochemistry to Assess Porphyry Copper Potential of the Tonggou Copper Deposit, Eastern Tianshan

Minerals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 584
Author(s):  
Xue-Bing Zhang ◽  
Feng-Mei Chai ◽  
Chuan Chen ◽  
Hong-Yan Quan ◽  
Ke-Yong Wang ◽  
...  
Keyword(s):  
Fractional Crystallization ◽  
Porphyry Copper ◽  
Copper Deposit ◽  
Middle Part ◽  
Orogenic Belt ◽  
Geochemical Data ◽  
Eastern Tianshan ◽  
Porphyry Cu ◽  
Central Asian ◽  
Geochemical Analyses

Eastern Tianshan hosts a number of porphyry Cu deposits. However, these mainly formed in the Jueluotage Belt, in the middle part of Eastern Tianshan. The Tonggou porphyry Cu mineralization is an exception to this, since it is located in the Bogda Orogenic Belt, north of Eastern Tianshan. We obtained new zircon U-Pb ages, whole-rock geochemical data, zircon Hf isotope data, and zircon trace element compositions. LA-ICP-MS zircon U-Pb dating indicates a crystallization age of 302.2–303.0 Ma for the Tonggou mineralized granodiorite (TMG), which suggests that the Tonggou porphyry Cu mineralization formed in the Late Carboniferous period. εHf (t) data (1.8–14.1) for TMG suggests it was sourced from juvenile crustal melts, mixed with some mantle materials. TMG displays low ΣREE, compatible elements (Ba, Sr, Zr, and Hf), Zr/Hf and Nb/Ta ratios, as well as clearly negative Eu anomalies in whole rocks analyses. In addition, TMG is enriched in P, Hf and Th/U ratios in zircon, and has lower crystallization temperatures (734 to 735 °C) than the Daheyan barren granodiorite (DBG) (753 to 802 °C). Whole rock and zircon geochemical analyses show that the TMG was formed by fractional crystallization to a greater extent than the DBG in the Bogda Orogenic Belt. Moreover, zircon grains of the TMG show high Ce4+/Ce3+ ratios (159–286), which are consistent with related values from large porphyry deposits of the Central Asian Orogenic Belt (CAOB). High Ce4+/Ce3+ ratios reflect oxidizing magmas as a result of fractional crystallization, which indicates that the Tonggou deposit has potential to host a large porphyry Cu deposit.

scholarly journals Petrochemical characteristics of late Paleozoic magmatic rocks of the Mandakh area, southeast Mongolia

2018 ◽  
pp. 5-21
Author(s):  
Undarmaa Batsaikhan ◽  
Tsuchiya Noriyoshi ◽  
Chimedtseren Anaad ◽  
Batkhishig Bayaraa
Keyword(s):  
Porphyry Copper ◽  
Copper Deposit ◽  
Porphyry Copper Deposit ◽  
Late Paleozoic ◽  
Calc Alkaline ◽  
Porphyry Cu ◽  
Magmatic Rocks ◽  
Mineral Assemblages ◽  
Intrusive Rocks ◽  
Quartz Monzonite

The late Paleozoic magmatic rocks are widely distributed in the Mandakh area which is located in the Gurvansaikhan and Manlai terrains, where porphyry Cu deposits occur. In this paper we discuss petrochemical features and mineral assemblages of magmatic rocks in the Mandakh area. Furthermore, we compared petrochemical characteristics of magmatic rocks in the Mandakh area with host magmatic rocks of the Tampakan deposit (Philippines), Cerro Colorado deposit (Chili) and negative criteria of Cu deposits (Japan) due to try to characterize potential of the porphyry copper deposit related to magmatic rocks in Mandakh area. Geochemical features of magmatic rocks in Mandakh area are calc-alkaline, magnetite-series, I-type and similar to adakite type. The Devonian intrusive rocks comprised of syenite and syenogranite, while the Carboniferous intrusive rocks consist of granodiorite, monzodiorite, quartz-monzonite and hornblende granite. Devonian magmatic rocks are more alkaline in composition. Although, Devonian and Carboniferous magmatic rocks are slightly different from each other. Comparing with bonanza copper deposits in the world, they are possible to host porphyry mineralization.

Sign in / Sign up

Export Citation Format

Share Document