scholarly journals Spatial patterns of deformation and paleoslope estimation within the marginal and central portions of a basin-floor mass-transport deposit, Taranaki Basin, New Zealand

Geosphere ◽  
2015 ◽  
Vol 11 (2) ◽  
pp. 266-306 ◽  
Author(s):  
Glenn R. Sharman ◽  
Stephan A. Graham ◽  
Larisa U. Masalimova ◽  
Lauren E. Shumaker ◽  
Peter R. King
2020 ◽  
Vol 500 (1) ◽  
pp. 147-171 ◽  
Author(s):  
Suzanne Bull ◽  
Greg H. Browne ◽  
Malcolm J. Arnot ◽  
Lorna J. Strachan

AbstractThree-dimensional (3D) seismic data reveal the complex interplay between the surface topography of a c. 4405 km3 mass transport deposit (MTD) and overlying sedimentary packages over approximately the last two million years. The data image part of the Pleistocene to recent shelf to slope to basin-floor Giant Foresets Formation in offshore western New Zealand. The MTD created substantive topographic relief and rugosity at the contemporaneous seabed, formed by the presence of a shallow basal detachment surface, and very large (up to 200 m high) intact slide blocks, respectively. Sediments were initially deflected away from high-relief MTD topography and confined in low areas. With time, the MTD was progressively healed by a series of broadly offset-stacked and increasingly unconfined packages comprised of many channel bodies and their distributary complexes. Positive topography formed by the channels and their distributary complexes further modified the seafloor and influenced the location of subsequent sediment deposition. Channel sinuosity increased over time, interpreted as the result of topographic healing and reduced seafloor gradients. The rate of sediment supply is likely to have been non-uniform, reflecting tectonic pulses across the region. Sediments were routed into deep water via slope-confined channels that originated shortly before emplacement of the MTD.


2020 ◽  
Vol 40 (5) ◽  
pp. 789-807
Author(s):  
G. H. Browne ◽  
S. Bull ◽  
M. J. Arnot ◽  
A. F. Boyes ◽  
P. R. King ◽  
...  

2021 ◽  
Author(s):  
◽  
Sarah Grain

<p>The Moki Formation, Taranaki Basin, New Zealand, is a Mid Miocene (Late Altonian to Early Lillburnian) sand-rich turbidite complex bounded above and below by the massive bathyal mudstone of the Manganui Formation. The Moki Formation is a proven hydrocarbon reservoir with its stacked, thick, tabular sandstone packages totalling more than 300 m in places. Previous regional studies of the formation have been based primarily on well data and resulted in varying palaeogeographic interpretations. This study, restricted to the southern offshore region of the basin, better constrains the spatial and temporal development of the Moki Formation by combining well data with seismic interpretation to identify key stratal geometries within the sediment package. Nearly 30,000 km of 2D seismic reflection profiles and two 3D surveys, along with data from 18 wells and three cores were reviewed and key sections analysed in detail. Seismic facies have been identified which provide significant insights into the structure, distribution and progressive development of the Moki Formation. These include: a clearly defined eastern limit of the fan complex, thinning and fining of the distal turbidite complex onto the basin floor in the north and west, evidence of fan lobe switching, spectacular meandering channel systems incised into the formation at seismic scales, and the coeval palaeoshelf-slope break in the south east of the basin. In addition, a Latest Lillburnian / Waiauan turbidite complex has been mapped with large feeder, fan and bypassing channels traced. This study presents an improved palaeogeographic interpretation of the Moki Formation and the younger, Latest Lillburnian / Waiauan-aged, turbidite complex. This interpretation shows that during the Late Altonian, sandstone deposition was localised to small fan bodies in the vicinity of Maui-4 to Moki-1 wells. A bathymetric deepening during the Clifdenian is identified, which appears to have occurred concurrently as the establishment of the Moki Formation fan system, centred around the southern and central wells. With continued sediment supply to the basin floor, the fan system prograded markedly northward and spilled onto the Western Stable Platform during the early Lillburnian. Sand influx to the bathyal basin floor abruptly ceased and large volumes of mud were deposited. By the Waiauan stage, sands were again deposited at bathyal depths on fan bodies and carried to greater depths through a complex bypassing channel system.</p>


2021 ◽  
Author(s):  
◽  
Zelia Dos Santos

<p>Northern Zealandia lies between Australia, New Zealandia, and New Caledonia. It has an area of 3,000,000 km2 and is made up of bathymetric rises and troughs with typical water depths of 1000 to 4000 m. I use 39,309 line km of seismic-reflection profiles tied to recent International Ocean Discovery Program (IODP) drilling and three boreholes near the coast of New Zealand to investigate stratigraphic architecture and assess the petroleum prospectivity of northern Zealandia.  Sparse sampling requires that stratigraphic and petroleum prospectivity inferences are drawn from better-known basins in New Zealand, Australia, New Caledonia, TimorLeste and Papua New Guinea. Five existing seismic-stratigraphic units are reviewed. Zealandia Seismic Unit U3 is sampled near New Zealand and may contain Jurassic Muhiriku Group coals. Elsewhere, Seismic Unit 3 may have oil-prone equivalents of the Jurassic Walloon Coal Measure in eastern Australia; or may contain Triassic-Jurassic marine source rocks, as found in offshore Bonaparte Basin, onshore Timor-Leste, and the Papuan Basin in Papua New Guinea. Seismic Unit U2b (Mid-Cretaceous) is syn-rift and may contain coal measures, as found in Taranaki-Aotea Basin and New Caledonia. Seismic Unit U2a (Late Cretaceous to Eocene) contains coaly source rocks in the southeastern part of the study area, and may also contain marine equivalent carbonaceous mudstone, as found at Site IODP U1509. Unit U2a is transgressive, with coaly source rocks and reservoir sandstones near its base, and clay, marl and chalk above that provides a regional seal. Seismic Unit U1b (Eocene-Oligocene) is mass-transport complexes and basin floor fans related to a brief phase of convergent deformation that created folds in the southern part of the study area and regionally uplifted ridges to create new sediment source areas. Basin floor fans may contain reservoir rock and Eocene folding created structural traps. Seismic Unit U1a is Oligocene and Neogene chalk, calcareous ooze, and marl that represents overburden. Mass accumulation rates (MAR) and climatic temperatures were high in the late Miocene and early Pliocene, resulting in peak thermal maturity and hydrocarbon expulsion at ~ 3 Ma.  Approximately one-fifth of the region has adequate source rock maturity for petroleum expulsion at the base of Seismic Unit U2: Fairway Basin (FWAY), southern New Caledonia Trough (NCTS) and Reinga Basin (REIN). Plays may exist in either Seismic Unit U3 or U2, with many plausible reservoir-seal combinations, and several possible trapping mechanisms: unconformities, normal faults, folds, or stratigraphic pinch-out. The rest of the region could be prospective, but requires a source rock to exist within Seismic Unit U3, which is mostly unsampled and remains poorly understood.</p>


2019 ◽  
Vol 7 (4) ◽  
pp. SK19-SK32 ◽  
Author(s):  
Paritosh Bhatnagar ◽  
Sumit Verma ◽  
Ron Bianco

The Permian Basin is a structurally complex sedimentary basin with an extensive history of tectonic deformation. As the basin evolved through time, sediments dispersed into the basin floor from surrounding carbonate platforms leading to various mass movements. One such mass movement is observed on a 3D seismic survey in the Upper Leonard interval (Lower Permian) of the Midland Basin that is characteristic of a mass transport deposit (MTD). The 350 ft thick MTD mapped in the study area is 5 mi wide, extends up to 14 mi basinward, and covers only the translational and compressional regime of the mass movement. A unique sedimentary feature, unlike those observed previously, is mapped and interpreted as gravity spreading. MTDs have been extensively studied in the Delaware Basin of Permian-aged strata; however, only a few works have been published on the geomorphological expression of MTDs using seismic and seismic attributes to delineate the shape, size, and anatomy of this subsurface feature. The MTD in the study area exhibits an array of features including slide, slump, basal shear surface, and MTD grooves. In cross section, the MTD is characterized as chaotic with semitransparent reflectors terminating laterally against a coherent package of seismic facies, or the lateral wall. Sobel filter-based coherence, structural curvature, dip magnitude, and dip azimuth attributes are used to map thrust faults within the discontinuous MTD. Kinematic evidence provided by the Upper Spraberry isopach suggests that this MTD was sourced north of the Midland Basin and deposited on the basin floor fairway. Slope strata are interpreted from well-log analysis showing MTD as a mixture of carbonates and siliciclastics with a moderate to high resistivity response.


2021 ◽  
Author(s):  
◽  
Zelia Dos Santos

<p>Northern Zealandia lies between Australia, New Zealandia, and New Caledonia. It has an area of 3,000,000 km2 and is made up of bathymetric rises and troughs with typical water depths of 1000 to 4000 m. I use 39,309 line km of seismic-reflection profiles tied to recent International Ocean Discovery Program (IODP) drilling and three boreholes near the coast of New Zealand to investigate stratigraphic architecture and assess the petroleum prospectivity of northern Zealandia.  Sparse sampling requires that stratigraphic and petroleum prospectivity inferences are drawn from better-known basins in New Zealand, Australia, New Caledonia, TimorLeste and Papua New Guinea. Five existing seismic-stratigraphic units are reviewed. Zealandia Seismic Unit U3 is sampled near New Zealand and may contain Jurassic Muhiriku Group coals. Elsewhere, Seismic Unit 3 may have oil-prone equivalents of the Jurassic Walloon Coal Measure in eastern Australia; or may contain Triassic-Jurassic marine source rocks, as found in offshore Bonaparte Basin, onshore Timor-Leste, and the Papuan Basin in Papua New Guinea. Seismic Unit U2b (Mid-Cretaceous) is syn-rift and may contain coal measures, as found in Taranaki-Aotea Basin and New Caledonia. Seismic Unit U2a (Late Cretaceous to Eocene) contains coaly source rocks in the southeastern part of the study area, and may also contain marine equivalent carbonaceous mudstone, as found at Site IODP U1509. Unit U2a is transgressive, with coaly source rocks and reservoir sandstones near its base, and clay, marl and chalk above that provides a regional seal. Seismic Unit U1b (Eocene-Oligocene) is mass-transport complexes and basin floor fans related to a brief phase of convergent deformation that created folds in the southern part of the study area and regionally uplifted ridges to create new sediment source areas. Basin floor fans may contain reservoir rock and Eocene folding created structural traps. Seismic Unit U1a is Oligocene and Neogene chalk, calcareous ooze, and marl that represents overburden. Mass accumulation rates (MAR) and climatic temperatures were high in the late Miocene and early Pliocene, resulting in peak thermal maturity and hydrocarbon expulsion at ~ 3 Ma.  Approximately one-fifth of the region has adequate source rock maturity for petroleum expulsion at the base of Seismic Unit U2: Fairway Basin (FWAY), southern New Caledonia Trough (NCTS) and Reinga Basin (REIN). Plays may exist in either Seismic Unit U3 or U2, with many plausible reservoir-seal combinations, and several possible trapping mechanisms: unconformities, normal faults, folds, or stratigraphic pinch-out. The rest of the region could be prospective, but requires a source rock to exist within Seismic Unit U3, which is mostly unsampled and remains poorly understood.</p>


2017 ◽  
Vol 30 (2) ◽  
pp. 237-248 ◽  
Author(s):  
Nuttakarn Panpichityota ◽  
Christopher K. Morley ◽  
Jaydeep Ghosh
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document