scholarly journals The effects of differential compaction on clinothem geometries and shelf-edge trajectories

Geology ◽  
2019 ◽  
Vol 47 (11) ◽  
pp. 1011-1014 ◽  
Author(s):  
Daan Beelen ◽  
Christopher A.-L. Jackson ◽  
Stefano Patruno ◽  
David M. Hodgson ◽  
João P. Trabucho Alexandre

Abstract The geometry of basin-margin strata documents changes in water depth, slope steepness, and sedimentary facies distributions. Their stacking patterns are widely used to define shelf-edge trajectories, which reflect long-term variations in sediment supply and relative sea-level change. Here, we present a new method to reconstruct the geometries and trajectories of clinoform-bearing basin-margin successions. Our sequential decompaction technique explicitly accounts for downdip lithology variations, which are inherent to basin-margin stratigraphy. Our case studies show that preferential compaction of distal, fine-grained foresets and bottomsets results in a vertical extension of basin-margin strata and a basinward rotation of the original shelf-edge trajectory. We discuss the implications these effects have for sea-level reconstructions and for predicting the timing of sediment transfer to the basin floor.

2020 ◽  
Vol 90 (8) ◽  
pp. 938-968
Author(s):  
Ariana Osman ◽  
Ronald J. Steel ◽  
Ryan Ramsook ◽  
Cornel Olariu ◽  
Si Chen

ABSTRACT Icehouse continental-shelf-margin accretion is typically driven by high-sediment-supply deltas and repeated glacio-eustatic, climate-driven sea-level changes on a ca. 100 ky time scale. The paleo–Orinoco margin is no exception to this, as the paleo–Orinoco River Delta with its high sediment load prograded across Venezuela, then into the Southern and Columbus basins of Trinidad since the late Miocene, depositing a continental-margin sedimentary prism that is > 12 km thick, 200 km wide, and 500 km along dip. The Cruse Formation (> 800 m thick; 3 My duration) records the first arrival of the paleo–Orinoco Delta into the Trinidad area. It then accreted eastwards, outwards onto the Atlantic margin, by shallow to deepwater clinoform increments since the late Miocene and is capped by a major, thick flooding interval (the Lower Forest Clay). Previous research has provided an understanding of the paleo–Orinoco Delta depositional system at seismic and outcrop scales, but a clinoform framework detailing proximal to distal reaches through the main fairway of the Southern Basin has never been built. We integrate data from 58 wells and outcrop observations to present a 3-D illustration of 15 mapped Cruse clinoforms, in order to understand the changing character of the first Orinoco clastic wedge on Trinidad. The clinoforms have an undecompacted average height of 550 m, estimated continental slope of 2.5° tapering to 1°, and a distance from shelf edge to near-base of slope of > 10 km. The clinoform framework shows trajectory changes from strong shelf-margin progradation (C10–C13) to aggradation (C14–C20) and to renewed progradation (C21–24). Cruse margin progradational phases illustrate oblique clinothem geometries that lack well-developed topsets but contain up to 70 m (200 ft) thick, deepwater slope channels. This suggests a high supply of sediment during periods of repeated icehouse rise and fall of eustatic sea level, with fall outpacing subsidence rates at times, and delivery of sand to the deepwater region of the embryonic Columbus channel region. Also, evidence of wholesale shelf-edge collapse and canyon features seen in outcrop strongly suggest that deepwater conduits for sediment dispersal and bypass surfaces for Cruse basin-floor fans do exist. The change to a topset aggradational pattern with a rising shelf trajectory may be linked to increased subsidence associated with eastward migration of the Caribbean plate. The Cruse-margin topsets were dominated by mixed fluvial–wave delta lobes that were effective in delivery of sands to the basin floor. The preservation of a fluvial regime of the delta may have been impacted by basin geometry which partly sheltered the area from the open Atlantic wave energy at the shelf edge. Ultimately, understanding shelf-edge migration style as well as process-regime changes during cross-shelf transits of the delta will help to predict the location of bypassed sands and their delivery to deepwater areas.


Geology ◽  
2020 ◽  
Vol 48 (9) ◽  
pp. 893-897
Author(s):  
Jinyu Zhang ◽  
Zoltán Sylvester ◽  
Jacob Covault

Abstract A long-standing goal of sedimentary geoscience is to understand how tectonic and climatic changes are reflected in basin fill. Here, we use 14 numerical models of continental-scale sediment-routing systems spanning millions of years to investigate the responses of sediment supply and basin sedimentation to changes in uplift and precipitation in the source area. We also investigate the extent to which these signals can be altered by relative sea level (the sum of subsidence and eustasy). In cases of constant relative sea level, sediment supply and margin progradation have similar responses because nearly all of the sediment is transported beyond the coastal plain and continental shelf to the basin margin. Thus, margin progradation can be used as a proxy for sediment supply. However, changes in uplift and precipitation result in different erosional patterns in the source area and different basin-margin depositional patterns. Changes in uplift result in gradual (over several million years) adjustment to new steady states of source-area erosion and margin progradation, whereas changes in precipitation result in abrupt changes in erosion and progradation followed by a return to the initial steady states. In cases of changing relative sea level, sediment storage on the shelf attenuates signals of uplift, but signals of precipitation change can be interpreted in the basin-margin record because climate-induced sediment supply changes are large enough to influence margin progradation. Understanding the relationship between sediment supply and basin-margin progradation, and their linked responses to forcings, improves our ability to interpret signals of environmental change in the stratigraphic record.


2018 ◽  
Author(s):  
Xuesong Ding ◽  
Tristan Salles ◽  
Nicolas Flament ◽  
Patrice Rey

Abstract. The sedimentary architecture at continental margins reflects the interplay between the rate of change of accommodation creation (δA) and the rate of change of sediment supply (δS). As a result, stratigraphic interpretation increasingly focuses on understanding the link between deposition patterns and changes in δA/δS. Here, we use the landscape modelling framework pyBadlands to assess the respective performance of two well-established stratigraphic interpretation techniques: the trajectory analysis method and the accommodation succession method. In contrast to most Stratigraphic Forward Models (SFMs), pyBadlands provides self-consistent sediment supply to basin margins as it simulates erosion, sediment transport and deposition in a source-to-sink context. We present a landscape evolution that takes into account periodic sea level variations and passive margin thermal subsidence over 30 million years, under uniform rainfall. We implement the two aforementioned approaches to interpret the resulting depositional cycles at the continental margin. We first apply both the trajectory analysis and the accommodation succession methods to manually map key stratigraphic surfaces and define stratigraphic units from shelf-edge (or offlap break) trajectories, stratal terminations and stratal geometries. We then design a set of post-processing numerical tools to calculate shoreline and shelf-edge trajectories, the temporal evolution of changes in accommodation and sedimentation, and automatically produce stratigraphic interpretations. Comparing manual and automatic stratigraphic interpretations reveals that the results of the trajectory analysis method depend on time-dependent processes such as thermal subsidence whereas the accommodation succession method does not. In addition to reconstructing stratal stacking patterns, the tools we introduce here make it possible to quickly extract Wheeler diagrams and synthetic cores at any location within the simulated domain. Our work provides an efficient and flexible quantitative sequence stratigraphic framework to evaluate the main drivers (climate, sea level and tectonics) controlling sedimentary architectures and investigate their respective roles in sedimentary basins development.


2021 ◽  
Author(s):  
Nurul Syazwin Zamri ◽  
Ying Jia Teoh ◽  
Khalf Khiri AbuBakr ◽  
Meor Hakif Amir Hassan ◽  
Nur Azwin Ismail ◽  
...  

Abstract The purpose of this paper is to present information on the past sea-level fluctuations of sedimentary rock succession of the Perlis area that covers the Mempelam Limestone, Timah Tasoh Formation, Sanai Limestone, Telaga Jatoh Formation, Kubang Pasu Formation, and Chuping Formation at Bukit Tungku Lembu and Guar Sanai, Perlis, Malaysia. Based on sedimentology logging, cycle stacking patterns, and accommodation variations revealed by Fischer plots, 51 cyclic sequences of third-order depositional sequences are recognized. These sequences generally consist of transgressive and regressive events. As the thickness of the cycle column increases, it forms an increase in accommodation space and subsidence rate and results in rising sea level. As the thickness of the cycle column decreases, it will form a decrease in accommodation space and subsidence rate and resulting in sea-level fall. Generally, the facies of the cycle are vertically arranged, forming coarsening and fining upward patterns observed from sedimentology logging. The Silurian Mempelam Limestone-Carboniferous Chepor Member sequence is characterized by a progressive increase and decrease in accommodation space, indicating a rise and fall in sea level. In contrast, the Carboniferous Uppermost Kubang Pasu-Permian Chuping Limestone sequence is characterized by a progressive decrease in accommodation space, indicating a longer-term fall in sea level. The regressive-transgressive cycles recognize deviations in the accommodation space and sediment supply from the cyclic successions. In turn, these cycles are expressing the long-term of Perlis’s sea-level fluctuations. The results notably reflect the cycles consistent with the long-term rising and falling trend on different regions globally in Paleozoic times.


2020 ◽  
Vol 500 (1) ◽  
pp. 147-171 ◽  
Author(s):  
Suzanne Bull ◽  
Greg H. Browne ◽  
Malcolm J. Arnot ◽  
Lorna J. Strachan

AbstractThree-dimensional (3D) seismic data reveal the complex interplay between the surface topography of a c. 4405 km3 mass transport deposit (MTD) and overlying sedimentary packages over approximately the last two million years. The data image part of the Pleistocene to recent shelf to slope to basin-floor Giant Foresets Formation in offshore western New Zealand. The MTD created substantive topographic relief and rugosity at the contemporaneous seabed, formed by the presence of a shallow basal detachment surface, and very large (up to 200 m high) intact slide blocks, respectively. Sediments were initially deflected away from high-relief MTD topography and confined in low areas. With time, the MTD was progressively healed by a series of broadly offset-stacked and increasingly unconfined packages comprised of many channel bodies and their distributary complexes. Positive topography formed by the channels and their distributary complexes further modified the seafloor and influenced the location of subsequent sediment deposition. Channel sinuosity increased over time, interpreted as the result of topographic healing and reduced seafloor gradients. The rate of sediment supply is likely to have been non-uniform, reflecting tectonic pulses across the region. Sediments were routed into deep water via slope-confined channels that originated shortly before emplacement of the MTD.


1994 ◽  
Vol 34 (1) ◽  
pp. 350 ◽  
Author(s):  
Keyu Liu ◽  
Lincoln Paterson ◽  
Feng Xu Jian

SEDPAK is a forward modelling computer program for depositional processes developed by the University of South Carolina's StratMod Group. It simulates the geometry of generalised lithofacies in a sedimentary sequence or a basin by considering principally four major geological variables: eustatic sea level, tectonic movement, sediment accumulation, and initial and evolving basin surfaces.Based on seismic data, well logs and other information from drill holes, the geometries of sedimentary sequences of the Gippsland Basin and the Barrow-Exmouth Sub-basins have been successfully reproduced on both basin and reservoir scales using SEDPAK 3.12. The simulation results indicate that eustacy, tectonics, sediment input and basin physiography can be equally important in controlling the geometry of strata and basin architecture. However, some differences exist: (1) tectonic movement normally contributes to long-term variations of the first order (megasequence) basin architecture and configuration; (2) the second order (sequence) basin architecture and stratal geometry can be controlled by either sediment supply, eustacy, tectonism or a combination; and (3) high frequency facies variations and stratal geometry within individual sequences are primarily controlled by eustatic sea level variations and basin physiography.This study has demonstrated that SEDPAK is a useful tool for reconstruction of basin evolution histories and for reservoir characterisation. It can also be used to predict sedimentary facies in undrilled exploration frontier areas. In addition, it can be used to address some critical assumptions and problems in the sequence stratigraphy concept. SEDPAK is particularly useful in the study of high frequency sequence stratigraphy and cyclicity, where various sequence or parasequence bounding surfaces and internal geometry can not be easily recognised from seismic data, well logs and outcrops.


2019 ◽  
Vol 12 (6) ◽  
pp. 2571-2585 ◽  
Author(s):  
Xuesong Ding ◽  
Tristan Salles ◽  
Nicolas Flament ◽  
Patrice Rey

Abstract. The sedimentary architecture at continental margins reflects the interplay between the rate of change of accommodation creation (δA) and the rate of change of sediment supply (δS). Stratigraphic interpretation increasingly focuses on understanding the link between deposition patterns and changes in δA∕δS, with an attempt to reconstruct the contributing factors. Here, we use the landscape modelling code pyBadlands to (1) investigate the development of stratigraphic sequences in a source-to-sink context; (2) assess the respective performance of two well-established stratigraphic interpretation techniques: the trajectory analysis method and the accommodation succession method; and (3) propose quantitative stratigraphic interpretations based on those two techniques. In contrast to most stratigraphic forward models (SFMs), pyBadlands provides self-consistent sediment supply to basin margins as it simulates erosion, sediment transport and deposition in a source-to-sink context. We present a generic case of landscape evolution that takes into account periodic sea level variations and passive margin thermal subsidence over 30 million years, under uniform rainfall. A set of post-processing tools are provided to analyse the predicted stratigraphic architecture. We first reconstruct the temporal evolution of the depositional cycles and identify key stratigraphic surfaces based on observations of stratal geometries and facies relationships, which we use for comparison to stratigraphic interpretations. We then apply both the trajectory analysis and the accommodation succession methods to manually map key stratigraphic surfaces and define sequence units on the final model output. Finally, we calculate shoreline and shelf-edge trajectories, the temporal evolution of changes in relative sea level (proxy for δA) and sedimentation rate (proxy for δS) at the shoreline, and automatically produce stratigraphic interpretations. Our results suggest that the analysis of the presented model is more robust with the accommodation succession method than with the trajectory analysis method. Stratigraphic analysis based on manually extracted shoreline and shelf-edge trajectory requires calibrations of time-dependent processes such as thermal subsidence or additional constraints from stratal terminations to obtain reliable interpretations. The 3-D stratigraphic analysis of the presented model reveals small lateral variations of sequence formations. Our work provides an efficient and flexible quantitative sequence stratigraphic framework to evaluate the main drivers (climate, sea level and tectonics) controlling sedimentary architectures and investigate their respective roles in sedimentary basin development.


Sign in / Sign up

Export Citation Format

Share Document