The impact of lithification on the diversity, size distribution, and recovery dynamics of marine invertebrate assemblages

Geology ◽  
2009 ◽  
Vol 37 (2) ◽  
pp. 115-118 ◽  
Author(s):  
Jocelyn A. Sessa ◽  
Mark E. Patzkowsky ◽  
Timothy J. Bralower
Keyword(s):  
Size Distribution ◽  
Marine Invertebrate ◽  
Invertebrate Assemblages ◽  
Recovery Dynamics ◽  
The Impact

scholarly journals Internal devaluation and economic inequality in Portugal: challenges to industrial relations in times of crisis and recovery

2021 ◽  
pp. 102425892199500
Author(s):  
Maria da Paz Campos Lima ◽  
Diogo Martins ◽  
Ana Cristina Costa ◽  
António Velez
Keyword(s):  
Collective Bargaining ◽  
Wage Inequality ◽  
Economic Inequality ◽  
Industrial Relations ◽  
National Level ◽  
Wage Share ◽  
Recovery Dynamics ◽  
Wage Increases ◽  
The Impact ◽  
Wage Outcomes

Internal devaluation policies imposed in southern European countries since 2010 have weakened labour market institutions and intensified wage inequality and the falling wage share. The debate in the wake of the financial and economic crisis raised concerns about slow wage growth and persistent economic inequality. This article attempts to shed light on this debate, scrutinising the case of Portugal in the period 2010–2017. Mapping the broad developments at the national level, the article examines four sectors, looking in particular at the impact of minimum wages and collective bargaining on wage trends vis-à-vis wage inequality and wage share trajectories. We conclude that both minimum wage increases and the slight recovery of collective bargaining had a positive effect on wage outcomes and were important in reducing wage inequality. The extent of this reduction was limited, however, by uneven sectoral recovery dynamics and the persistent effects of precarious work, combined with critical liberalisation reforms.

scholarly journals Evaluating model parameterizations of submicron aerosol scattering and absorption with in situ data from ARCTAS 2008

2016 ◽  
Vol 16 (14) ◽  
pp. 9435-9455 ◽  
Author(s):  
Matthew J. Alvarado ◽  
Chantelle R. Lonsdale ◽  
Helen L. Macintyre ◽  
Huisheng Bian ◽  
Mian Chin ◽  
...  
Keyword(s):  
Optical Properties ◽  
Size Distribution ◽  
Aerosol Size Distribution ◽  
Visible Radiation ◽  
Submicron Aerosol ◽  
In Situ Data ◽  
Aerosol Absorption ◽  
Aerosol Scattering ◽  
The Impact

Abstract. Accurate modeling of the scattering and absorption of ultraviolet and visible radiation by aerosols is essential for accurate simulations of atmospheric chemistry and climate. Closure studies using in situ measurements of aerosol scattering and absorption can be used to evaluate and improve models of aerosol optical properties without interference from model errors in aerosol emissions, transport, chemistry, or deposition rates. Here we evaluate the ability of four externally mixed, fixed size distribution parameterizations used in global models to simulate submicron aerosol scattering and absorption at three wavelengths using in situ data gathered during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) campaign. The four models are the NASA Global Modeling Initiative (GMI) Combo model, GEOS-Chem v9-02, the baseline configuration of a version of GEOS-Chem with online radiative transfer calculations (called GC-RT), and the Optical Properties of Aerosol and Clouds (OPAC v3.1) package. We also use the ARCTAS data to perform the first evaluation of the ability of the Aerosol Simulation Program (ASP v2.1) to simulate submicron aerosol scattering and absorption when in situ data on the aerosol size distribution are used, and examine the impact of different mixing rules for black carbon (BC) on the results. We find that the GMI model tends to overestimate submicron scattering and absorption at shorter wavelengths by 10–23 %, and that GMI has smaller absolute mean biases for submicron absorption than OPAC v3.1, GEOS-Chem v9-02, or GC-RT. However, the changes to the density and refractive index of BC in GC-RT improve the simulation of submicron aerosol absorption at all wavelengths relative to GEOS-Chem v9-02. Adding a variable size distribution, as in ASP v2.1, improves model performance for scattering but not for absorption, likely due to the assumption in ASP v2.1 that BC is present at a constant mass fraction throughout the aerosol size distribution. Using a core-shell mixing rule in ASP overestimates aerosol absorption, especially for the fresh biomass burning aerosol measured in ARCTAS-B, suggesting the need for modeling the time-varying mixing states of aerosols in future versions of ASP.

scholarly journals Experimental-numerical studies of the effect of cell structure on the mechanical properties of polypropylene foams

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 713-723
Author(s):  
Wei Gong ◽  
Tuan-Hui Jiang ◽  
Xiang-Bu Zeng ◽  
Li He ◽  
Chun Zhang
Keyword(s):  
Mechanical Properties ◽  
Size Distribution ◽  
Cell Size ◽  
Cell Structure ◽  
Structure Parameters ◽  
Cell Size Distribution ◽  
Numerical Studies ◽  
Polypropylene Foam ◽  
The Impact ◽  
The Relationship

AbstractThe effects of the cell size and distribution on the mechanical properties of polypropylene foam were simulated and analyzed by finite element modeling with ANSYS and supporting experiments. The results show that the reduced cell size and narrow size distribution have beneficial influences on both the tensile and impact strengths. Decreasing the cell size or narrowing the cell size distribution was more effective for increasing the impact strength than the tensile strength in the same case. The relationship between the mechanical properties and cell structure parameters has a good correlation with the theoretical model.

scholarly journals Impact of vehicular emissions on the formation of fine particles in the Sao Paulo Metropolitan Area: a numerical study with the WRF-Chem model

2016 ◽  
Vol 16 (2) ◽  
pp. 777-797 ◽  
Author(s):  
A Vara-Vela ◽  
M. F. Andrade ◽  
P. Kumar ◽  
R. Y. Ynoue ◽  
A. G. Muñoz
Keyword(s):  
Size Distribution ◽  
Metropolitan Area ◽  
Atmospheric Aerosols ◽  
Fine Particles ◽  
Sao Paulo ◽  
Vehicular Emissions ◽  
São Paulo ◽  
Mass Size Distribution ◽  
Mass Size ◽  
The Impact

Abstract. The objective of this work is to evaluate the impact of vehicular emissions on the formation of fine particles (PM2.5;  ≤  2.5 µm in diameter) in the Sao Paulo Metropolitan Area (SPMA) in Brazil, where ethanol is used intensively as a fuel in road vehicles. The Weather Research and Forecasting with Chemistry (WRF-Chem) model, which simulates feedbacks between meteorological variables and chemical species, is used as a photochemical modelling tool to describe the physico-chemical processes leading to the evolution of number and mass size distribution of particles through gas-to-particle conversion. A vehicular emission model based on statistical information of vehicular activity is applied to simulate vehicular emissions over the studied area. The simulation has been performed for a 1-month period (7 August–6 September 2012) to cover the availability of experimental data from the NUANCE-SPS (Narrowing the Uncertainties on Aerosol and Climate Changes in Sao Paulo State) project that aims to characterize emissions of atmospheric aerosols in the SPMA. The availability of experimental measurements of atmospheric aerosols and the application of the WRF-Chem model made it possible to represent some of the most important properties of fine particles in the SPMA such as the mass size distribution and chemical composition, besides allowing us to evaluate its formation potential through the gas-to-particle conversion processes. Results show that the emission of primary gases, mostly from vehicles, led to a production of secondary particles between 20 and 30 % in relation to the total mass concentration of PM2.5 in the downtown SPMA. Each of PM2.5 and primary natural aerosol (dust and sea salt) contributed with 40–50 % of the total PM10 (i.e. those  ≤  10 µm in diameter) concentration. Over 40 % of the formation of fine particles, by mass, was due to the emission of hydrocarbons, mainly aromatics. Furthermore, an increase in the number of small particles impaired the ultraviolet radiation and induced a decrease in ozone formation. The ground-level O3 concentration decreased by about 2 % when the aerosol-radiation feedback is taken into account.

Trapping patterns during capillary displacements in disordered media

2022 ◽  
Vol 933 ◽  
Author(s):  
Fanli Liu ◽  
Moran Wang
Keyword(s):  
Numerical Simulations ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Disordered Media ◽  
Pore Geometry ◽  
Control Parameters ◽  
Pore Throat ◽  
The Impact ◽  
Theoretical Analyses

We investigate the impact of wettability distribution, pore size distribution and pore geometry on the statistical behaviour of trapping in pore-throat networks during capillary displacement. Through theoretical analyses and numerical simulations, we propose and prove that the trapping patterns, defined as the percentage and distribution of trapped elements, are determined by four dimensionless control parameters. The range of all possible trapping patterns and how the patterns are dependent on the four parameters are obtained. The results help us to understand the impact of wettability and structure on trapping behaviour in disordered media.

Development of Model for Acoustic Noise Generated from Bedload in Rivers 

2021 ◽  
Author(s):  
Mohamad Nasr ◽  
Thomas Geay ◽  
Sébastien Zanker ◽  
Recking Alain
Keyword(s):  
Grain Size ◽  
Size Distribution ◽  
Impact Velocity ◽  
Acoustic Noise ◽  
Acoustic Power ◽  
Bedload Transport ◽  
Empirical Formulas ◽  
Impact Rate ◽  
Flux Measurements ◽  
The Impact

<p>Quantifying bedload transport is important for many applications such as river management and hydraulic structures protection. Bedload flux measurements can be achieved using physical sampler methods. However, these methods are expensive, time-consuming, and difficult to operate during high discharge events. Besides, these methods do not permit to capture the spatial and temporal variability of bedload transport flux. Recently, alternative measuring technologies have been developed to continuously monitor bedload flux and grain size distribution using passive or active sensors. Among them, the hydrophone was used to monitor bedload transport by recording the sounds generated by bedload particles colliding on the river bed (referred as self-generated noise SGN). The acoustic power of SGN was correlated with bedload flux in field experiments. To better understand these experimental results and to estimate measurement uncertainties, we developed a theoretical model to simulate the SGN. The model computes an estimation of the power spectral density (PSD)by considering the contribution of all signals generated by impacts between bedload particles and the riverbed, and accounting for the attenuation of the acoustic signal between the source and the hydrophone position due to river propagation effects,. In this model, we</p><p>The energy of acoustic noise generated from the collision between two particles is mainly dependent on the transported particles' diameter and the impact velocity. We tested different empirical formulas for the estimation of the number of impact (impact rate) and the impact velocity depending on particle size and hydraulic conditions. To characterize the acoustic power losses as a function of distance and frequency, we used an attenuation function which was experimentally calibrated for different French rivers.</p><p>We tested the model on a field dataset comprising acoustic and bedload flux measurements. The results indicate that the PSD model allows estimating acoustic power (in between a range of one order of magnitude) for most of the rivers considered.  The model sensitivity was evaluated. In particular, we observed that it is very sensitive to the empirical formulas used to determine the impact rate and impact speed. In addition, special attention should be kept in mind on the assumption of the grain size distribution of riverbed which can generate large variability in some rivers particularly in rivers with a significant sand fraction.</p>

scholarly journals Development of Bubble Characteristics on Chute Spillway Bottom

Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1129
Author(s):  
Ruidi Bai ◽  
Chang Liu ◽  
Bingyang Feng ◽  
Shanjun Liu ◽  
Faxing Zhang
Keyword(s):  
Size Distribution ◽  
Bubble Size ◽  
Dissipation Rate ◽  
Bubble Diameter ◽  
Bubble Size Distribution ◽  
Impact Zone ◽  
Air Bubble ◽  
Air Supply ◽  
Bubble Characteristics ◽  
The Impact

Chute aerators introduce a large air discharge through air supply ducts to prevent cavitation erosion on spillways. There is not much information on the microcosmic air bubble characteristics near the chute bottom. This study was focused on examining the bottom air-water flow properties by performing a series of model tests that eliminated the upper aeration and illustrated the potential for bubble variation processes on the chute bottom. In comparison with the strong air detrainment in the impact zone, the bottom air bubble frequency decreased slightly. Observations showed that range of probability of the bubble chord length tended to decrease sharply in the impact zone and by a lesser extent in the equilibrium zone. A distinct mechanism to control the bubble size distribution, depending on bubble diameter, was proposed. For bubbles larger than about 1–2 mm, the bubble size distribution followed a—5/3 power-law scaling with diameter. Using the relationship between the local dissipation rate and bubble size, the bottom dissipation rate was found to increase along the chute bottom, and the corresponding Hinze scale showed a good agreement with the observations.

Abrupt mortality of marine invertebrates at the Younger Dryas-Holocene transition in a shallow inlet of the Goldthwait Sea

The Holocene ◽  
2018 ◽  
Vol 28 (12) ◽  
pp. 1894-1908
Author(s):  
Andréanne Bourgeois-Roy ◽  
Hugo Crites ◽  
Pascal Bernatchez ◽  
Denis Lacelle ◽  
André Martel
Keyword(s):  
Mytilus Edulis ◽  
Marine Invertebrates ◽  
Transition Period ◽  
Marine Invertebrate ◽  
Laurentide Ice Sheet ◽  
The North ◽  
Invertebrate Diversity ◽  
Shell Deposit ◽  
The Impact ◽  
Rapid Environmental Change

The late Pleistocene–early Holocene transition period was characterized by rapid environmental change. Here, we investigate the impact of these changes on the marine invertebrates living in a shallow inlet of the post-glacial Goldthwait Sea. The site is located near Baie-Comeau (QC, Canada), where a number of remarkably well-preserved shell deposits are found along the Rivière aux Anglais Valley on the north shore of the St. Lawrence maritime estuary. Seven phyla of marine invertebrates with a minimum of 25 species or taxa were inventoried in a shell deposit, dominated by a community of Hiatella arctica with Mytilus edulis and barnacles composing the subcommunity. The majority of taxa identified in the shell deposit are boreal and sub-Arctic species; however, temperate species that exist today in the St. Lawrence maritime estuary have not been found. Based on marine invertebrate diversity and δ18O(CaCO3) of Mytilus edulis, the water in the shallow inlet of the Goldthwait Sea must have been cold and saline. The range of AMS 14C ages from 15 Mytilus edulis, constrained to 10,900 and 10,690 cal. yr BP, and exceptional state of preservation of adult and juvenile molluscan specimens suggest the abrupt mortality of entire invertebrate communities due to changing hydrodynamic conditions that included the combined effect of freshwater discharge from the receding Laurentide Ice Sheet and rapid isostatic uplift.

scholarly journals Green Preparation, Spheroidal, and Superior Property of Nano-1,3,5,7-Tetranittro-1,3,5,7-Tetrazocane

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Xinlei Jia ◽  
Jingyu Wang ◽  
Conghua Hou ◽  
Yingxin Tan
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Fractal Dimension ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Fractal Theory ◽  
Crystal Form ◽  
Decomposition Temperature ◽  
Scanning Calorimetry ◽  
The Impact

Herein, a green process for preparing nano-HMX, mechanical demulsification shearing (MDS) technology, was developed. Nano-HMX was successfully fabricated via MDS technology without using any chemical reagents, and the fabrication mechanism was proposed. Based on the “fractal theory,” the optimal shearing time for mechanical emulsification was deduced by calculating the fractal dimension of the particle size distribution. The as-prepared nano-HMX was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). And the impact sensitivities of HMX particles were contrastively investigated. The raw HMX had a lower fractal dimension of 1.9273. The ideal shearing time was 7 h. The resultant nano-HMX possessed a particle size distribution ranging from 203.3 nm to 509.1 nm as compared to raw HMX. Nano-HMX particles were dense spherical, maintaining β-HMX crystal form. In addition, they had much lower impact sensitivity. However, the apparent activation energy as well as thermal decomposition temperature of nano-HMX particles was decreased, attributing to the reduced probability for hotspot generation. Especially when the shearing time was 7 h, the activation energy was markedly decreased.

Sign in / Sign up

Export Citation Format

Share Document