Evaluating the role of topographic inversion in the formation of the Stanislaus Table Mountains in the Sierra Nevada (California, USA)

Author(s):  
Emmanuel Gabet

The Table Mountains, a flat-topped series of ridges capped by a 10.4 Ma latite flow in the Stanislaus River watershed, are considered to be evidence for late Cenozoic uplift-driven landscape rejuvenation in the northern Sierra Nevada range (California, USA). The commonly accepted theory for the formation of these mesas posits that the latite flowed and cooled within a bedrock paleovalley and, since then, the surrounding landscape has eroded away, leaving behind the volcanic deposit as a ridge. Although this theory is accepted by many, it has not been thoroughly tested. In this study, I examine a series of geological cross-sections extracted along the length of the latite deposit to determine whether the evidence supports the existence of bedrock valley walls on both sides of the 10.4 Ma flow. I find that the presence of older Cenozoic deposits adjacent to the latite flow precludes the possibility that the flow would have been constrained within a bedrock valley. Moreover, the cross-section from an 1865 report that has been offered as evidence of topographic inversion (and subsequently reproduced in numerous publications) does not accurately represent the topography at that site. I conclude that there is no evidence that the bedrock topography has been inverted and that instead, the latite flowed within a channel cut into underlying Cenozoic deposits, which have since mostly eroded away. This study, therefore, refutes the hypothesis that the Stanislaus River watershed was rejuvenated in the late Cenozoic and challenges the claim for recent significant uplift of the region.

2019 ◽  
Vol 132 (3-4) ◽  
pp. 655-667 ◽  
Author(s):  
Emmanuel J. Gabet

Abstract In this study, the strong lithological heterogeneity of the northern Sierra Nevada (California, USA) is exploited to elucidate the role of lithology on river profiles and patterns at the mountain-range scale. The analyses indicate that plutonic, metavolcanic, and quartzite bedrock generally host the steepest river reaches, whereas gentle reaches flow across non-quartzite metasedimentary rocks and fault zones. In addition, the largest immobile boulders are often in the steepest reaches, suggesting that wide joint spacing plays a role in creating steep channels, and a positive relationship between boulder size and hillslope angle highlights the coupling of the hillslope and fluvial systems. With respect to river network configurations, dendritic patterns dominate in the plutonic bedrock, with channels aligned down the slope of the range; in contrast, river reaches in the metamorphic belts are mainly longitudinal and parallel to the structural grain. River profiles and patterns in the northern Sierra Nevada, therefore, bear a strong lithological imprint related to differential erosion. These observations indicate that attempts to infer uplift and tilting of the range based on the gradients and orientations of paleochannel remnants should first account for the effect of bedrock erodibility. Indeed, the differences in gradients of Tertiary paleochannel remnants used to argue for late Cenozoic uplift of the range can be wholly explained by differences in lithology.


Author(s):  
Xudong Weng ◽  
Peter Rez

In electron energy loss spectroscopy, quantitative chemical microanalysis is performed by comparison of the intensity under a specific inner shell edge with the corresponding partial cross section. There are two commonly used models for calculations of atomic partial cross sections, the hydrogenic model and the Hartree-Slater model. Partial cross sections could also be measured from standards of known compositions. These partial cross sections are complicated by variations in the edge shapes, such as the near edge structure (ELNES) and extended fine structures (ELEXFS). The role of these solid state effects in the partial cross sections, and the transferability of the partial cross sections from material to material, has yet to be fully explored. In this work, we consider the oxygen K edge in several oxides as oxygen is present in many materials. Since the energy window of interest is in the range of 20-100 eV, we limit ourselves to the near edge structures.


2002 ◽  
Vol 719 ◽  
Author(s):  
Myoung-Woon Moon ◽  
Kyang-Ryel Lee ◽  
Jin-Won Chung ◽  
Kyu Hwan Oh

AbstractThe role of imperfections on the initiation and propagation of interface delaminations in compressed thin films has been analyzed using experiments with diamond-like carbon (DLC) films deposited onto glass substrates. The surface topologies and interface separations have been characterized by using the Atomic Force Microscope (AFM) and the Focused Ion Beam (FIB) imaging system. The lengths and amplitudes of numerous imperfections have been measured by AFM and the interface separations characterized on cross sections made with the FIB. Chemical analysis of several sites, performed using Auger Electron Spectroscopy (AES), has revealed the origin of the imperfections. The incidence of buckles has been correlated with the imperfection length.


2021 ◽  
Vol 51 (3) ◽  
pp. 780-787
Author(s):  
Sh. Hamada ◽  
Nourhan M. Elmedalaa ◽  
I. Bondouk ◽  
N. Darwish ◽  
Awad A. Ibraheem

Atoms ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 33
Author(s):  
R.I. Campeanu ◽  
Colm T. Whelan

Triple differential cross sections (TDCS) are presented for the electron and positron impact ionization of inert gas atoms in a range of energy sharing geometries where a number of significant few body effects compete to define the shape of the TDCS. Using both positrons and electrons as projectiles has opened up the possibility of performing complementary studies which could effectively isolate competing interactions that cannot be separately detected in an experiment with a single projectile. Results will be presented in kinematics where the electron impact ionization appears to be well understood and using the same kinematics positron cross sections will be presented. The kinematics are then varied in order to focus on the role of distortion, post collision interaction (pci), and interference effects.


Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 438
Author(s):  
Jose Luis Diaz-Hernandez ◽  
Antonio Jose Herrera-Martinez

At present, there is a lack of detailed understanding on how the factors converging on water variables from mountain areas modify the quantity and quality of their watercourses, which are features determining these areas’ hydrological contribution to downstream regions. In order to remedy this situation to some extent, we studied the water-bodies of the western sector of the Sierra Nevada massif (Spain). Since thaw is a necessary but not sufficient contributor to the formation of these fragile water-bodies, we carried out field visits to identify their number, size and spatial distribution as well as their different modelling processes. The best-defined water-bodies were the result of glacial processes, such as overdeepening and moraine dams. These water-bodies are the highest in the massif (2918 m mean altitude), the largest and the deepest, making up 72% of the total. Another group is formed by hillside instability phenomena, which are very dynamic and are related to a variety of processes. The resulting water-bodies are irregular and located at lower altitudes (2842 m mean altitude), representing 25% of the total. The third group is the smallest (3%), with one subgroup formed by anthropic causes and another formed from unknown origin. It has recently been found that the Mediterranean and Atlantic watersheds of this massif are somewhat paradoxical in behaviour, since, despite its higher xericity, the Mediterranean watershed generally has higher water contents than the Atlantic. The overall cause of these discrepancies between watersheds is not connected to their formation processes. However, we found that the classification of water volumes by the manners of formation of their water-bodies is not coherent with the associated green fringes because of the anomalous behaviour of the water-bodies formed by moraine dams. This discrepancy is largely due to the passive role of the water retained in this type of water-body as it depends on the characteristics of its hollows. The water-bodies of Sierra Nevada close to the peak line (2918 m mean altitude) are therefore highly dependent on the glacial processes that created the hollows in which they are located. Slope instability created water-bodies mainly located at lower altitudes (2842 m mean altitude), representing tectonic weak zones or accumulation of debris, which are influenced by intense slope dynamics. These water-bodies are therefore more fragile, and their existence is probably more short-lived than that of bodies created under glacial conditions.


Sign in / Sign up

Export Citation Format

Share Document