Dynamic locomotion synchronization of bipedal robot and human operator via bilateral feedback teleoperation

2019 ◽  
Vol 4 (35) ◽  
pp. eaav4282 ◽  
Author(s):  
Joao Ramos ◽  
Sangbae Kim

Despite remarkable progress in artificial intelligence, autonomous humanoid robots are still far from matching human-level manipulation and locomotion proficiency in real applications. Proficient robots would be ideal first responders to dangerous scenarios such as natural or man-made disasters. When handling these situations, robots must be capable of navigating highly unstructured terrain and dexterously interacting with objects designed for human workers. To create humanoid machines with human-level motor skills, in this work, we use whole-body teleoperation to leverage human control intelligence to command the locomotion of a bipedal robot. The challenge of this strategy lies in properly mapping human body motion to the machine while simultaneously informing the operator how closely the robot is reproducing the movement. Therefore, we propose a solution for this bilateral feedback policy to control a bipedal robot to take steps, jump, and walk in synchrony with a human operator. Such dynamic synchronization was achieved by (i) scaling the core components of human locomotion data to robot proportions in real time and (ii) applying feedback forces to the operator that are proportional to the relative velocity between human and robot. Human motion was sped up to match a faster robot, or drag was generated to synchronize the operator with a slower robot. Here, we focused on the frontal plane dynamics and stabilized the robot in the sagittal plane using an external gantry. These results represent a fundamental solution to seamlessly combine human innate motor control proficiency with the physical endurance and strength of humanoid robots.

Robotica ◽  
2010 ◽  
Vol 29 (2) ◽  
pp. 325-334 ◽  
Author(s):  
Luc Boutin ◽  
Antoine Eon ◽  
Said Zeghloul ◽  
Patrick Lacouture

SUMMARYThis paper presents a method to generate humanoid gaits from a human locomotion pattern recorded by a motion capture system. Thirty seven reflective markers were fixed on the human subject skin in order to get the subject whole body motion. To reproduce the human gait, especially the toes and heel contacts, the front and back edges of the robot's feet are used as support at the start and the end of the double support phase. The balance of the robot is respected using the zero moment point (ZMP) criterion and confirmed by the simulation software OPENHRP (General Robotics, Inc®). First, the feet trajectory as well as the ZMP reference trajectory are defined from the motion of the robot controlled as a marionette with the measured human joint angles. Then a specific inverse kinematic (IK) algorithm is proposed to find the humanoid robot's joint trajectories respecting the constraints of balance, floor contacts, and joint limits. The studied motion presented in this paper is a human walking trajectory containing a start, a movement in a straight line, a stop, and a quarter turn. The method was developed to be easily used for human-like robots of different sizes, masses, and structures and has been tested on the robot HRP-2 (AIST, Kawada Industries, Inc®) and on the small-sized humanoid robot HOAP-3 (Fujitsu Automation Ltd®).


2021 ◽  
pp. 154596832110193
Author(s):  
Sungwoo Park ◽  
Chang Liu ◽  
Natalia Sánchez ◽  
Julie K. Tilson ◽  
Sara J. Mulroy ◽  
...  

Background People poststroke often walk with a spatiotemporally asymmetric gait, due in part to sensorimotor impairments in the paretic lower extremity. Although reducing asymmetry is a common objective of rehabilitation, the effects of improving symmetry on balance are yet to be determined. Objective We established the concurrent validity of whole-body angular momentum as a measure of balance, and we determined if reducing step length asymmetry would improve balance by decreasing whole-body angular momentum. Methods We performed clinical balance assessments and measured whole-body angular momentum during walking using a full-body marker set in a sample of 36 people with chronic stroke. We then used a biofeedback-based approach to modify step length asymmetry in a subset of 15 of these individuals who had marked asymmetry and we measured the resulting changes in whole-body angular momentum. Results When participants walked without biofeedback, whole-body angular momentum in the sagittal and frontal plane was negatively correlated with scores on the Berg Balance Scale and Functional Gait Assessment supporting the validity of whole-body angular momentum as an objective measure of dynamic balance. We also observed that when participants walked more symmetrically, their whole-body angular momentum in the sagittal plane increased rather than decreased. Conclusions Voluntary reductions of step length asymmetry in people poststroke resulted in reduced measures of dynamic balance. This is consistent with the idea that after stroke, individuals might have an implicit preference not to deviate from their natural asymmetry while walking because it could compromise their balance. Clinical Trials Number: NCT03916562.


Author(s):  
ChangHyun Sung ◽  
Takahiro Kagawa ◽  
Yoji Uno

AbstractIn this paper, we propose an effective planning method for whole-body motions of humanoid robots under various conditions for achieving the task. In motion planning, various constraints such as range of motion have to be considered. Specifically, it is important to maintain balance in whole-body motion. In order to be useful in an unpredictable environment, rapid planning is an essential problem. In this research, via-point representation is used for assigning sufficient conditions to deal with various constraints in the movement. The position, posture and velocity of the robot are constrained as a state of a via-point. In our algorithm, the feasible motions are planned by modifying via-points. Furthermore, we formulate the motion planning problem as a simple iterative method with a Linear Programming (LP) problem for efficiency of the motion planning. We have applied the method to generate the kicking motion of a HOAP-3 humanoid robot. We confirmed that the robot can successfully score a goal with various courses corresponding to changing conditions of the location of an obstacle. The computation time was less than two seconds. These results indicate that the proposed algorithm can achieve efficient motion planning.


2019 ◽  
Vol 116 ◽  
pp. 51-63 ◽  
Author(s):  
Rizwan Asif ◽  
Ali Athar ◽  
Faisal Mehmood ◽  
Fahad Islam ◽  
Yasar Ayaz

2013 ◽  
Vol 32 (9-10) ◽  
pp. 1089-1103 ◽  
Author(s):  
Sébastien Dalibard ◽  
Antonio El Khoury ◽  
Florent Lamiraux ◽  
Alireza Nakhaei ◽  
Michel Taïx ◽  
...  

2013 ◽  
Vol 330 ◽  
pp. 407-411 ◽  
Author(s):  
Vesna Raspudić

Tracking of human body motion is applied in many fields, such as virtual reality, clinical biomechanics, the study of man-machine-environment relationship, the analysis of sports movements, etc. Nowadays, the preferred approach to tracking human body motion is based on the use of appropriate optical or magnetic markers, which are placed on specific landmark points, and real-time estimating of their spatial coordinates. With the improvements introduced in computerized monitoring of human motion kinematics, it is important to emphasize the significance of combining motion capture data with commercial CAD packages. The aim of this research was to develop new interactive methods in creating virtual models within the highly sophisticated CAD computer technologies, as well as computer simulations for analyzing the various forms of human locomotion. Within this research, special attention is focused on the study of locomotion when climbing stairs, as an activity that requires large amount of metabolic energy, and thus represents great difficulty in performing daily activities for people with disorders of the musculoskeletal system, and particularly for people with lower limb amputation.


Sign in / Sign up

Export Citation Format

Share Document