scholarly journals Revisiting evidence for widespread seismicity in the upper mantle under Los Angeles

2021 ◽  
Vol 7 (4) ◽  
pp. eabf2862
Author(s):  
Lei Yang ◽  
Xin Liu ◽  
Gregory C. Beroza
Keyword(s):  
Stress Concentration ◽  
Los Angeles ◽  
Upper Mantle ◽  
Active Faults ◽  
Fault Zones ◽  
Seismic Array ◽  
Seismogenic Zone ◽  
Long Beach ◽  
Back Projection ◽  
Deep Seismicity

We revisit the finding of widespread deep seismicity in the upper mantle imaged with a dense, temporary nodal seismic array in Long Beach, California using back-projection to detect candidate events and trace randomization to develop a reliable imaging threshold for candidate detections. We find that nearly all detections of small events at depths greater than 20 kilometers in the upper mantle fall below the reliability threshold. We find a modest number of small, shallower events in the crust that appear to align with the active Newport-Inglewood Fault. These events occur primarily at 15- to 20-kilometer depth near the base of the seismogenic zone. Localized seismicity under fault zones suggests that the deep extensions of active faults are localized and deforming, with stress concentration leading to a concentration of small events, near the seismic-aseismic transition.

scholarly journals Dip angles of active faults from the surface to the seismogenic zone inferred from a 2D numerical analysis of visco-elasto-plastic models: a case study for the Osaka Plain

2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Hayami Nishiwaki ◽  
Takamoto Okudaira ◽  
Kazuhiko Ishii ◽  
Muneki Mitamura
Keyword(s):  
Urban Areas ◽  
Active Faults ◽  
Three Dimensional ◽  
Seismogenic Zone ◽  
Earthquake Ground Motion ◽  
Convex Curve ◽  
Seismic Reflection Profile ◽  
Geological Structures ◽  
Dimensional Distribution ◽  
Dip Angle

AbstractThe geometries (i.e., dip angles) of active faults from the surface to the seismogenic zone are the most important factors used to evaluate earthquake ground motion, which is crucial for seismic hazard assessments in urban areas. In Osaka, a metropolitan city in Japan, there are several active faults (e.g., the Uemachi and Ikoma faults), which are inferred from the topography, the attitude of active faults in surface trenches, the seismic reflection profile at shallow depths (less than 2 km), and the three-dimensional distribution of the Quaternary sedimentary layers. The Uemachi and Ikoma faults are N–S-striking fault systems with total lengths of 42 km and 38 km, respectively, with the former being located ~ 12 km west of the latter; however, the geometries of each of the active faults within the seismogenic zone are not clear. In this study, to examine the geometries of the Uemachi and Ikoma faults from the surface to the seismogenic zone, we analyze the development of the geological structures of sedimentary layers based on numerical simulations of a two-dimensional visco-elasto-plastic body under a horizontal compressive stress field, including preexisting high-strained weak zones (i.e., faults) and surface sedimentation processes, and evaluate the relationship between the observed geological structures of the Quaternary sediments (i.e., the Osaka Group) in the Osaka Plain and the model results. As a result, we propose geometries of the Uemachi and Ikoma faults from the surface to the seismogenic zone. When the friction coefficient of the faults is ~ 0.5, the dip angles of the Uemachi and Ikoma faults near the surface are ~ 30°–40° and the Uemachi fault has a downward convex curve at the bottom of the seismogenic zone, but does not converge to the Ikoma fault. Based on the analysis in this study, the dip angle of the Uemachi fault zone is estimated to be approximately 30°–40°, which is lower than that estimated in the previous studies. If the active fault has a low angle, the width of the fault plane is long, and thus the estimated seismic moment will be large.

scholarly journals Thermal squeezing of the seismogenic zone controlled rupture of the volcano-rooted Flores Thrust

2021 ◽  
Vol 7 (5) ◽  
pp. eabe2348
Author(s):  
Karen Lythgoe ◽  
Muzli Muzli ◽  
Kyle Bradley ◽  
Teng Wang ◽  
Andri Dian Nugraha ◽  
...  
Keyword(s):  
Thermal Structure ◽  
Critical Role ◽  
Volcanic Edifice ◽  
Seismic Array ◽  
Temperature Gradients ◽  
Seismogenic Zone ◽  
Arc Volcano

Temperature plays a critical role in defining the seismogenic zone, the area of the crust where earthquakes most commonly occur; however, thermal controls on fault ruptures are rarely observed directly. We used a rapidly deployed seismic array to monitor an unusual earthquake cascade in 2018 at Lombok, Indonesia, during which two magnitude 6.9 earthquakes with surprisingly different rupture characteristics nucleated beneath an active arc volcano. The thermal imprint of the volcano on the fault elevated the base of the seismogenic zone beneath the volcanic edifice by 8 km, while also reducing its width. This thermal “squeezing” directly controlled the location, directivity, dynamics, and magnitude of the earthquake cascade. Earthquake segmentation due to thermal structure can occur where strong temperature gradients exist on a fault.

CRUSTAL DEFORMATION STUDIES IN JAVA (INDONESIA) USING GPS

2009 ◽  
Vol 03 (02) ◽  
pp. 77-88 ◽  
Author(s):  
HASANUDDIN Z. ABIDIN ◽  
HERI ANDREAS ◽  
TERUYUKI KATO ◽  
TAKEO ITO ◽  
IRWAN MEILANO ◽  
...  
Keyword(s):  
Active Faults ◽  
Fault Zones ◽  
First Year ◽  
Horizontal Deformation ◽  
West Java ◽  
Plate Movement ◽  
Tsunami Earthquake ◽  
Second Year ◽  
Seismic Deformation ◽  
Large Earthquakes

Along the Java trench the Australian–Oceanic plate is moving and pushing onto and subducting beneath the Java continental crust at a relative motion of about 70 mm/yr in NNE direction. This subduction-zone process imposed tectonic stresses on the fore-arc region offshore and on the land of Java, thus causing the formation of earthquake fault zones to accommodate the plate movement. Historically, several large earthquakes happened in Java, including West Java. This research use GPS surveys method to study the inter-seismic deformation of three active faults in West Java region (i.e. Cimandiri, Lembang and Baribis faults), and the co-seismic and post-seismic deformation related to the May 2006 Yogyakarta and the July 2006 South Java earthquakes. Based on GPS surveys results it was found that the area around Cimandiri, Lembang and Baribis fault zones have the horizontal displacements of about 1 to 2 cm/yr or less. Further research is however still needed to extract the real inter-seismic deformation of the faults from those GPS-derived displacements. GPS surveys have also estimated that the May 2006 Yogyakarta earthquake was caused by the sinistral movement of the (Opak) fault with horizontal co-seismic deformation that generally was less than 10 cm. The post-seismic horizontal deformation of the July 2006 South Java tsunami earthquake has also been estimated using GPS surveys data. In the first year after the earthquake (2006 to 2007), the post-seismic deformation is generally less than 5 cm; and it becomes generally less than 3 cm in the second year (2007 to 2008).

The 2019 Ms 4.2 and 5.2 Beiliu Earthquake Sequence in South China: Complex Conjugate Strike-Slip Faulting Revealed by Rupture Directivity Analysis

2021 ◽  
Author(s):  
Xiaohui He ◽  
Hao Liang ◽  
Peizhen Zhang ◽  
Yue Wang
Keyword(s):  
South China ◽  
Source Parameters ◽  
Active Faults ◽  
Fault Zones ◽  
Strike Slip ◽  
P Wave ◽  
Complex Conjugate ◽  
South China Block ◽  
Rupture Directivity ◽  
Time Duration

Abstract The South China block has been one of the most seismically quiescent regions in China, and the geometries and activities of the Quaternary faults have remained less studied due to the limited outcrops. Thus, source parameters of small-to-moderate earthquakes are important to help reveal the location, geometry distribution, and mechanical properties of the subsurface faults and thus improve the seismic risk assessment. On 12 October 2019, two earthquakes (the Ms 4.2 foreshock and the Ms 5.2 mainshock) occurred within 2 s and are located in southern South China block, near the junction region of the large-scale northeast-trending fault zones and the less continuous northwest-trending fault zones. We determined the point-source parameters of the two events via P-wave polarity analysis and regional waveform modeling, and the resolved focal mechanisms are significantly different with the minimum 3D rotation angle of 52°. We then resolved the rupture directivity of the two events by analyzing the azimuth variation of the source time duration and found the Ms 4.2 foreshock ruptured toward north-northwest for ∼1.0 km, and the Ms 5.2 mainshock ruptured toward east-southeast (ESE) for ∼1.5 km, implying conjugate strike-slip faulting. The conjugate causative faults have not been mapped on the regional geological map, and we infer that the two faults may be associated with the northwest-trending Bama-Bobai fault zone (the Shiwo section). These active faults are optimally oriented in the present-day stress field (northwest-southeast) and thus may now be potentially accumulating elastic strain to be released in a future large earthquake.

scholarly journals Application of the Environmental Seismic Intensity scale (ESI 2007) and the European Macroseismic Scale (EMS-98) to the Kalamata (SW Peloponnese, Greece) earthquake (Ms=6.2, September 13, 1986) and correlation with neotectonic structures and active faults

2014 ◽  
Vol 56 (6) ◽  
Author(s):  
Ioannis G. Fountoulis ◽  
Spyridon D. Mavroulis
Keyword(s):  
Structural Damage ◽  
Active Fault ◽  
Main Shock ◽  
Active Faults ◽  
Seismic Hazard Assessment ◽  
Seismic Intensity ◽  
Fault Zones ◽  
Earthquake Sequence ◽  
Ground Subsidence ◽  
Earthquake Scenario

On September 13, 1986, a shallow earthquake (Ms=6.2) struck the city of Kalamata and the surrounding areas (SW Peloponnese, Greece) resulting in 20 fatalities, over 300 injuries, extensive structural damage and many earthquake environmental effects (EEE). The main shock was followed by several aftershocks, the strongest of which occurred two days later (Ms=5.4). The EEE induced by the 1986 Kalamata earthquake sequence include ground subsidence, seismic faults, seismic fractures, rockfalls and hydrological anomalies. The maximum ESI 2007 intensity for the main shock has been evaluated as IX<sub>ESI 2007</sub>, strongly related to the active fault zones and the reactivated faults observed in the area as well as to the intense morphology of the activated Dimiova-Perivolakia graben, which is a 2nd order neotectonic structure located in the SE margin of the Kalamata-Kyparissia mega-graben and bounded by active fault zones. The major structural damage of the main shock was selective and limited to villages founded on the activated Dimiova-Perivolakia graben (IX<sub>EMS-98</sub>) and to the Kalamata city (IX<sub>EMS-98</sub>) and its eastern suburbs (IX<sub>EMS-98</sub>) located at the crossing of the prolongation of two major active fault zones of the affected area. On the contrary, damage of this size was not observed in the surrounding neotectonic structures, which were not activated during this earthquake sequence. It is concluded that both intensity scales fit in with the neotectonic regime of the area. The ESI 2007 scale complemented the EMS-98 seismic intensities and provided a completed picture of the strength and the effects of the September 13, 1986, Kalamata earthquake on the natural and the manmade environment. Moreover, it contributed to a better picture of the earthquake scenario and represents a useful and reliable tool for seismic hazard assessment.

scholarly journals Modeling of energy amplification recorded within Greater Los Angeles using irregular structure

1994 ◽  
Vol 84 (1) ◽  
pp. 47-61 ◽  
Author(s):  
Chandan K. Saikia ◽  
Douglas S. Dreger ◽  
Donald V. Helmberger
Keyword(s):  
Los Angeles ◽  
Surface Waves ◽  
Transfer Functions ◽  
Long Beach ◽  
Low Velocity ◽  
Time Duration ◽  
California Institute Of Technology ◽  
Downtown Los Angeles ◽  
Institute Of Technology ◽  
Energy Amplification

Abstract We have investigated energy amplification observed within Greater Los Angeles basin by analyzing regional waveforms recorded from several Nevada Test Site (NTS) nuclear explosions. Although the stations are located nearly at the same azimuth (distances ranging from 350 to 400 km), the seismograms recorded in Compton (the central part of the basin), Long Beach (the southern edge of the basin), and downtown Los Angeles are remarkably different, even for a common explosion. Following the onset of Lg waves, the Long Beach sites have recorded surface waves for more than 100 sec. From one explosion, the sites within downtown Los Angeles have recorded seismograms with strong 3-sec surface waves. These waves are not observed on the seismograms recorded in the neighboring hard-rock site California Institute of Technology (CIT) station. Thus, they must have been generated by local wave guides. Numerically, we modeled these 3-sec waves by convolving the CIT seismogram with the response of a sedimentary strata dipping gently (about 6°) from CIT toward downtown. We also examined the irregular basin effect by analyzing the variation of cumulative temporal energy across the basin relative to the energy recorded at CIT from the same explosion. Variation up to a factor of 30 was observed. To model the energy variation that is caused by extended surface waves in the Long Beach area, we used numerically simulated site transfer functions (STF) from a NNE-SSW oriented two-dimensional basin structure extending from Montebello to Palos Verdes that included low-velocity sedimentary material in the uppermost layers. These STFs were convolved with the CIT seismogram recorded from the MAST explosion. To simulate elongated duration of surface waves, we introduced in the upper sedimentary structure some discontinuous microbasin structures of varying size, each microbasin delaying the seismic waves propagating through them. Consequently, the surface-reflected phases through these structures are delayed and reflected into the upper medium by the underlying interfaces. This mechanism helps delayed energy to appear at a later time and result in a longer time duration at sites located at southern edge of the basin.

scholarly journals Estimation of absolute stress in the hypocentral region of the 2019 Ridgecrest, California, earthquakes

2020 ◽  
Author(s):  
Yuri Fialko
Keyword(s):  
Seismic Data ◽  
Plate Tectonics ◽  
Active Faults ◽  
Active Regions ◽  
Seismogenic Zone ◽  
Shear Stresses ◽  
Strong Earthquakes ◽  
Frictional Strength ◽  
Tectonically Active ◽  
Weak Fault

Abstract Strength of the upper brittle part of the Earth's lithosphere controls deformation styles in tectonically active regions, surface topography, seismicity, and the occurrence of plate tectonics, yet it remains one of the least constrained and most debated quantities in geophysics. Seismic data (in particular, earthquake focal mechanisms) have been used to infer orientation of the principal stress axes. Here I show that the focal mechanism data can be combined with information from precise earthquake locations to place robust constraints not only on the orientation, but also on the magnitude of absolute stress at depth. The proposed method uses machine learning to identify quasi-linear clusters of seismicity associated with active faults. A distribution of the relative attitudes of conjugate faults carries information about the amplitude and spatial heterogeneity of the deviatoric stress and frictional strength in the seismogenic zone. The observed diversity of dihedral angles between conjugate faults in the Ridgecrest (California, USA) area that hosted a recent sequence of strong earthquakes suggests the effective coefficient of friction of 0.4-0.6, and depth-averaged shear stresses on the order of 25-40 MPa, intermediate between predictions of the "strong" and "weak" fault theories.

Sign in / Sign up

Export Citation Format

Share Document