scholarly journals Formation of 2D and 3D multi-tori mesostructures via crystallization-driven self-assembly

2020 ◽  
Vol 6 (16) ◽  
pp. eaaz7301
Author(s):  
Gerald Guerin ◽  
Menandro Cruz ◽  
Qing Yu
Keyword(s):  
Self Assembly ◽  
Mixed Solvents ◽  
Three Dimensional ◽  
Solvent Mixture ◽  
Second Step ◽  
Spherical Shells ◽  
Topological Constraints ◽  
3D Objects ◽  
Multistep Process ◽  
2D And 3D

The fabrication of three-dimensional (3D) objects by polymer self-assembly in solution is extremely challenging. Here, multi-tori mesostructures were obtained from the crystallization-driven self-assembly of a coil-crystalline block copolymer (BCP) in mixed solvents. The formation of these structures follows a multistep process. First, the BCP self-assembles into amorphous micrometer-large vesicles. Then, the BCP confined in these mesosized vesicles crystallizes. This second step leads to the formation of objects with shapes ranging from closed 3D multi-tori spherical shells to 2D toroid mesh monolayers, depending on the solvent mixture composition. This approach demonstrates how topological constraints induced by the specific interactions between coil-crystalline BCP and solvents can be used to prepare mesostructures of complex morphologies.

scholarly journals Plasmonic Nanoparticles Driven Enhanced Light Amplification in a Local 2D and 3D Self-Assembly

Nanomaterials ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 1051 ◽  
Author(s):  
Konrad Cyprych ◽  
Denis Chateau ◽  
Anthony Désert ◽  
Stephane Parola ◽  
Jaroslaw Mysliwiec
Keyword(s):  
Self Assembly ◽  
Three Dimensional ◽  
Thin Layers ◽  
Enhancement Effect ◽  
Two Dimensional ◽  
Random Lasing ◽  
Light Amplification ◽  
Multilamellar Liposomes ◽  
Solid Thin Films ◽  
2D And 3D

We present fluorescence and a random lasing enhancement effect due to the interaction between gold nanoparticles (AuNPs) and Rhodamine 6G (Rh6G) dye. Non-covalently bounded dyes in the proximity of nanoparticles are studied in three systems of varying dimensionality: from (i) three-dimensional freely distributed suspensions, through (ii) quasi-two-dimensional multilamellar liposomes, to (iii) solid two-dimensional thin layers. Liposomes facilitate the formation of stable AuNPs/Rh6G composition showing enhanced fluorescence, while solid thin films exhibit plasmon-assisted random lasing.

scholarly journals SELF-ASSEMBLY OF THREE-DIMENSIONAL NANOPOROUS CONTAINERS

NANO ◽  
2009 ◽  
Vol 04 (01) ◽  
pp. 1-5 ◽  
Author(s):  
JAIHAI WANG ◽  
MIRA PATEL ◽  
DAVID H. GRACIAS
Keyword(s):  
Melting Point ◽  
Self Assembly ◽  
Three Dimensional ◽  
The Self ◽  
Second Step ◽  
Two Dimensional ◽  
The Third ◽  
Open Window ◽  
Side Walls ◽  
Molecular Separations

We describe a strategy to construct three-dimensional (3D) containers with nanoporous walls by the self-assembly of lithographically patterned two-dimensional cruciforms with solder hinges. The first step involves fabricating two-dimensional (2D) cruciforms composed of six unlinked patterns: each pattern has an open window. The second step entails photolithographic patterning of solder hinges that connect the cruciform. The third step involves the deposition of polystyrene particles within the windows and the subsequent electrodeposition of metal in the voids between the polystyrene particles. Following the dissolution of the particles, the cruciforms are released from the substrate and heated above the melting point of the solder causing the cruciforms to spontaneously fold up into 3D cubic containers with nanoporous walls. We believe these 3D containers with nanoporous side walls are promising for molecular separations and cell-based therapies.

scholarly journals 1,2,4-Triphospholyl anions – versatile building blocks for the formation of 1D, 2D and 3D assemblies

2015 ◽  
Vol 44 (22) ◽  
pp. 10245-10252 ◽  
Author(s):  
Claudia Heindl ◽  
Eugenia V. Peresypkina ◽  
Alexander V. Virovets ◽  
Vladislav Yu. Komarov ◽  
Manfred Scheer
Keyword(s):  
Supramolecular Chemistry ◽  
Self Assembly ◽  
Three Dimensional ◽  
Building Blocks ◽  
2D And 3D

The potential of K[P3C2R2] (R =tBu, Mes) as building blocks in metallo-supramolecular chemistry was investigated and self-assembly processes with Cu(i) halides resulted in the formation of a large variety of unprecedented one-, two- and even three-dimensional aggregates.

scholarly journals Supramolecular organic frameworks (SOFs): homogeneous regular 2D and 3D pores in water

2017 ◽  
Vol 4 (3) ◽  
pp. 426-436 ◽  
Author(s):  
Jia Tian ◽  
Hui Wang ◽  
Dan-Wei Zhang ◽  
Yi Liu ◽  
Zhan-Ting Li
Keyword(s):  
Solid State ◽  
Self Assembly ◽  
Organic Dyes ◽  
Three Dimensional ◽  
Building Blocks ◽  
Future Research ◽  
New Family ◽  
Molecular Building Blocks ◽  
Anionic Species ◽  
2D And 3D

Abstract Studies on periodic porosity and related properties and functions have been limited to insoluble solid-state materials. Self-assembly provides a straightforward and efficient strategy for the construction of soluble periodic porous supramolecular organic frameworks (SOFs) in water from rationally designed molecular building blocks. From rigid tri- and tetra-armed building blocks and cucurbitu[8]ril (CB[8]), a number of two-dimensional (2D) honeycomb, square and rhombic SOFs can be generated, which is driven by CB[8]-encapsulation-enhanced dimerization of two aromatic units on the periphery of the multi-armed molecules. By utilizing the same three-component host−guest motif as the driving force, three-dimensional (3D) diamondoid and cubic SOFs can be obtained from tetrahedral and [Ru(bipy)3]2+-derived octahedral monomers and CB[8]. All of the 2D and 3D periodic frameworks are soluble in water, and are able to maintain the periodicity as well as the pore sizes in the solid state. 3D SOFs are highly efficient homogeneous polycationic frameworks for reversible adsorption of anionic species including organic dyes, peptides, nucleic acids, drugs, dendrimers and Wells-Dawson-typed polyoxametallates (WD-POMs). WD-POM molecules adsorbed in the [Ru(bipy)3]2+-based SOF can catalyse the reduction of proton to H2 upon visible-light sensitization of [Ru(bipy)3]2+, which allows multiple electron transfer from [Ru(bipy)3]2+ to WD-POM. This review summarizes the design, formation and characterization of this new family of self-assembled frameworks, highlights their applications as homogeneous porous materials and finally outlines some future research directions.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Self-assembling behaviour of a modified aromatic amino acid in competitive medium

Soft Matter ◽  
2020 ◽  
Vol 16 (28) ◽  
pp. 6599-6607 ◽  
Author(s):  
Pijush Singh ◽  
Souvik Misra ◽  
Nayim Sepay ◽  
Sanjoy Mondal ◽  
Debes Ray ◽  
...  
Keyword(s):  
Amino Acid ◽  
Self Assembly ◽  
Aromatic Amino Acid ◽  
Photophysical Properties ◽  
Solvent Mixture ◽  
The Self ◽  
Solvent Ratio ◽  
Self Assembling

The self-assembly and photophysical properties of 4-nitrophenylalanine (4NP) are changed with the alteration of solvent and final self-assembly state of 4NP in competitive solvent mixture and are dictated by the solvent ratio.

scholarly journals Homogeneous 2D and 3D alignment of cardiomyocyte in dilated cardiomyopathy revealed by intravital heart imaging

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kiyoshi Masuyama ◽  
Tomoaki Higo ◽  
Jong-Kook Lee ◽  
Ryohei Matsuura ◽  
Ian Jones ◽  
...  
Keyword(s):  
Heart Failure ◽  
Dilated Cardiomyopathy ◽  
Cardiac Dysfunction ◽  
Three Dimensional ◽  
Single Layer ◽  
Specific Pattern ◽  
Two Dimensional ◽  
Heart Imaging ◽  
Novel Method ◽  
2D And 3D

AbstractIn contrast to hypertrophic cardiomyopathy, there has been reported no specific pattern of cardiomyocyte array in dilated cardiomyopathy (DCM), partially because lack of alignment assessment in a three-dimensional (3D) manner. Here we have established a novel method to evaluate cardiomyocyte alignment in 3D using intravital heart imaging and demonstrated homogeneous alignment in DCM mice. Whilst cardiomyocytes of control mice changed their alignment by every layer in 3D and position twistedly even in a single layer, termed myocyte twist, cardiomyocytes of DCM mice aligned homogeneously both in two-dimensional (2D) and in 3D and lost myocyte twist. Manipulation of cultured cardiomyocyte toward homogeneously aligned increased their contractility, suggesting that homogeneous alignment in DCM mice is due to a sort of alignment remodelling as a way to compensate cardiac dysfunction. Our findings provide the first intravital evidence of cardiomyocyte alignment and will bring new insights into understanding the mechanism of heart failure.

scholarly journals Do 3D Face Images Capture Cues of Strength, Weight, and Height Better than 2D Face Images do?

2021 ◽  
Vol 7 (3) ◽  
pp. 209-219
Author(s):  
Iris J Holzleitner ◽  
Alex L Jones ◽  
Kieran J O’Shea ◽  
Rachel Cassar ◽  
Vanessa Fasolt ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Physical Characteristics ◽  
Two Dimensional ◽  
3D Images ◽  
3D Face ◽  
Face Images ◽  
Similar Accuracy ◽  
2D And 3D ◽  
2D Images ◽  
Better Than

Abstract Objectives A large literature exists investigating the extent to which physical characteristics (e.g., strength, weight, and height) can be accurately assessed from face images. While most of these studies have employed two-dimensional (2D) face images as stimuli, some recent studies have used three-dimensional (3D) face images because they may contain cues not visible in 2D face images. As equipment required for 3D face images is considerably more expensive than that required for 2D face images, we here investigated how perceptual ratings of physical characteristics from 2D and 3D face images compare. Methods We tested whether 3D face images capture cues of strength, weight, and height better than 2D face images do by directly comparing the accuracy of strength, weight, and height ratings of 182 2D and 3D face images taken simultaneously. Strength, height and weight were rated by 66, 59 and 52 raters respectively, who viewed both 2D and 3D images. Results In line with previous studies, we found that weight and height can be judged somewhat accurately from faces; contrary to previous research, we found that people were relatively inaccurate at assessing strength. We found no evidence that physical characteristics could be judged more accurately from 3D than 2D images. Conclusion Our results suggest physical characteristics are perceived with similar accuracy from 2D and 3D face images. They also suggest that the substantial costs associated with collecting 3D face scans may not be justified for research on the accuracy of facial judgments of physical characteristics.

Extracellular vesicles from three dimensional culture of human placental mesenchymal stem cells ameliorated renal ischemia/reperfusion injury

2021 ◽  
pp. 039139882098680
Author(s):  
Xuefeng Zhang ◽  
Nan Wang ◽  
Yuhua Huang ◽  
Yan Li ◽  
Gang Li ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Extracellular Vesicles ◽  
Therapeutic Potential ◽  
Expression Profiles ◽  
Ischemia Reperfusion ◽  
Three Dimensional ◽  
3D Culture ◽  
Placental Mesenchymal Stem Cells ◽  
2D And 3D

Background: Three-dimensional (3D) culture has been reported to increase the therapeutic potential of mesenchymal stem cells (MSCs). The present study assessed the therapeutic efficacy of extracellular vesicles (EVs) from 3D cultures of human placental MSCs (hPMSCs) for acute kidney injury (AKI). Methods: The supernatants from monolayer culture (2D) and 3D culture of hPMSCs were ultra-centrifuged for EVs isolation. C57BL/6 male mice were submitted to 45 min bilateral ischemia of kidney, followed by renal intra-capsular administration of EVs within a 72 h reperfusion period. Histological, immunohistochemical, and ELISA analyses of kidney samples were performed to evaluate cell death and inflammation. Kidney function was evaluated by measuring serum creatinine and urea nitrogen. The miRNA expression profiles of EVs from 2D and 3D culture of hPMSCs were evaluated using miRNA microarray analysis. Results: The 3D culture of hPMSCs formed spheroids with different diameters depending on the cell density seeded. The hPMSCs produced significantly more EVs in 3D culture than in 2D culture. More importantly, injection of EVs from 3D culture of hPMSCs into mouse kidney with ischemia-reperfusion (I/R)-AKI was more beneficial in protecting from progression of I/R than those from 2D culture. The EVs from 3D culture of hPMSCs were more efficient against apoptosis and inflammation than those from 2D culture, which resulted in a reduction in tissue damage and amelioration of renal function. MicroRNA profiling analysis revealed that a set of microRNAs were significantly changed in EVs from 3D culture of hPMSCs, especially miR-93-5p. Conclusion: The EVs from 3D culture of hPMSCs have therapeutic potential for I/R-AKI.

Sign in / Sign up

Export Citation Format

Share Document