scholarly journals A stability-reversibility map unifies elasticity, plasticity, yielding, and jamming in hard sphere glasses

2018 ◽  
Vol 4 (12) ◽  
pp. eaat6387 ◽  
Author(s):  
Yuliang Jin ◽  
Pierfrancesco Urbani ◽  
Francesco Zamponi ◽  
Hajime Yoshino
Keyword(s):  
Glass Phase ◽  
Solid Phase ◽  
Hard Spheres ◽  
Granular Matter ◽  
Material Design ◽  
Amorphous Solids ◽  
Monte Carlo Algorithm ◽  
Unified Framework ◽  
Crossover Point ◽  
Wide Range

Amorphous solids, such as glasses, have complex responses to deformations, with substantial consequences in material design and applications. In this respect, two intertwined aspects are important: stability and reversibility. It is crucial to understand, on the one hand, how a glass may become unstable due to increased plasticity under shear deformations, and, on the other hand, to what extent the response is reversible, meaning how much a system is able to recover the original configuration once the perturbation is released. Here, we focus on assemblies of hard spheres as the simplest model of amorphous solids such as colloidal glasses and granular matter. We prepare glass states quenched from equilibrium supercooled liquid states, which are obtained by using the swap Monte Carlo algorithm and correspond to a wide range of structural relaxation time scales. We exhaustively map out their stability and reversibility under volume and shear strains using extensive numerical simulations. The region on the volume-shear strain phase diagram where the original glass state remains solid is bounded by the shear yielding and the shear jamming lines that meet at a yielding-jamming crossover point. This solid phase can be further divided into two subphases: the stable glass phase, where the system deforms purely elastically and is totally reversible, and the marginal glass phase, where it experiences stochastic plastic deformations at mesoscopic scales and is partially irreversible. The details of the stability-reversibility map depend strongly on the quality of annealing of the glass. This study provides a unified framework for understanding elasticity, plasticity, yielding, and jamming in amorphous solids.

Analysis of Aromatic Amines in Industrial Wastewater by Capillary Gas Chromatography-Mass Spectrometry

2000 ◽  
Vol 35 (2) ◽  
pp. 245-262 ◽  
Author(s):  
Francis I. Onuska ◽  
Ken A. Terry ◽  
R. James Maguire
Keyword(s):  
Gas Chromatography ◽  
Aromatic Amines ◽  
Methylene Chloride ◽  
Solid Phase ◽  
Stationary Phases ◽  
Gas Chromatography Mass Spectrometry ◽  
Substituted Anilines ◽  
Environmental Media ◽  
Solid Phase Extraction Cartridge ◽  
Wide Range

Abstract The analysis of aromatic amines, particularly benzidines, at trace levels in environmental media has been difficult because of the lack of suitable deactivated capillary column stationary phases for gas chromatography. This report describes the use of an improved type of column as well as a method for the analysis of anilines and benzidines in water, wastewater and sewage samples. Extraction procedures are applicable to a wide range of compounds that are effectively partitioned from an aqueous matrix into methylene chloride, or onto a solid-phase extraction cartridge. The extracted analytes are also amenable to separation on a capillary gas chromatographic column and transferable to the mass spectrometer. These contaminants are converted to their N-trifluoroacetyl derivatives. Aniline and some substituted anilines, and 3,3’-dichlorobenzidine and benzidine were determined in 24-h composite industrial water, wastewater, primary sludge and final effluent samples at concentrations from 0.03 up to 2760 µg/L.

Recent Application of Polystyrene-supported Triphenylphosphine in Solid-Phase Organic Synthesis

2019 ◽  
Vol 23 (6) ◽  
pp. 643-678
Author(s):  
Lalthazuala Rokhum ◽  
Ghanashyam Bez
Keyword(s):  
Organic Synthesis ◽  
Combinatorial Chemistry ◽  
Solid Phase ◽  
Recent Application ◽  
Organic Transformations ◽  
Solid Phase Organic Synthesis ◽  
Wide Range ◽  
Fast Development ◽  
Polymer Supported

Recent years have witnessed a fast development of solid phase synthetic pathways, a variety of solid-supported reagent and its applications in diverse synthetic strategies and pharmaceutical applicability’s. Polymer-supported triphenylphosphine is getting a lot of applications owing to the speed and simplicity in the process. Furthermore, ease of recyclability and reuse of polymer-supported triphenylphosphine added its advantages. This review covers a wide range of useful organic transformations which are accomplished using cross-linked polystyrene-supported triphenylphosphine with the aim of giving renewed interest in the field of organic and medicinal-combinatorial chemistry.

scholarly journals Recent Developments in the Determination of Biomarkers of Tobacco Smoke Exposure in Biological Specimens: A Review

2021 ◽  
Vol 18 (4) ◽  
pp. 1768
Author(s):  
Hernâni Marques ◽  
Pedro Cruz-Vicente ◽  
Tiago Rosado ◽  
Mário Barroso ◽  
Luís A. Passarinha ◽  
...  
Keyword(s):  
Tobacco Smoke ◽  
Solid Phase ◽  
Smoke Exposure ◽  
Tobacco Smoke Exposure ◽  
World Health ◽  
Second Hand Smoke ◽  
Tobacco Exposure ◽  
Wide Range ◽  
Recent Developments

Environmental tobacco smoke exposure (ETS) and smoking have been described as the most prevalent factors in the development of certain diseases worldwide. According to the World Health Organization, more than 8 million people die every year due to exposure to tobacco, around 7 million due to direct ETS and the remaining due to exposure to second-hand smoke. Both active and second-hand exposure can be measured and controlled using specific biomarkers of tobacco and its derivatives, allowing the development of more efficient public health policies. Exposure to these compounds can be measured using different methods (involving for instance liquid- or gas-chromatographic procedures) in a wide range of biological specimens to estimate the type and degree of tobacco exposure. In recent years, a lot of research has been carried out using different extraction methods and different analytical equipment; this way, liquid–liquid extraction, solid-phase extraction or even miniaturized procedures have been used, followed by chromatographic analysis coupled mainly to mass spectrometric detection. Through this type of methodologies, second-hand smokers can be distinguished from active smokers, and this is also valid for e-cigarettes and vapers, among others, using their specific biomarkers. This review will focus on recent developments in the determination of tobacco smoke biomarkers, including nicotine and other tobacco alkaloids, specific nitrosamines, polycyclic aromatic hydrocarbons, etc. The methods for their detection will be discussed in detail, as well as the potential use of threshold values to distinguish between types of exposure.

scholarly journals A high-throughput and sensitive methodology for the quantification of urinary 8-hydroxy-2′-deoxyguanosine: measurement with gas chromatography-mass spectrometry after single solid-phase extraction

2004 ◽  
Vol 380 (2) ◽  
pp. 541-548 ◽  
Author(s):  
Hai-Shu LIN ◽  
Andrew M. JENNER ◽  
Choon Nam ONG ◽  
Shan Hong HUANG ◽  
Matthew WHITEMAN ◽  
...  
Keyword(s):  
Gas Chromatography ◽  
Solid Phase Extraction ◽  
Healthy Subjects ◽  
Solid Phase ◽  
Large Population ◽  
Urine Samples ◽  
Gas Chromatography Mass Spectrometry ◽  
Phase Extraction ◽  
Freeze Dried ◽  
Wide Range

8-Hydroxy-2´-deoxyguanosine (8OHdG) is a widely used biomarker for the measurement of endogenous oxidative DNA damage. A sensitive method for the quantification of 8OHdG in urine by single solid-phase extraction and GC-MS (gas chromatography with MS detection) using selective ion monitoring is described in the present study. After solid-phase extraction, samples are freeze-dried, derivatized by trimethylsilylation and analysed by GC-MS. The urinary 8OHdG was quantified using heavy isotope dilution with [18O]8OHdG. The recovery of 8OHdG after the solid-phase extraction ranged from 70 to 80% for a wide range of urinary 8OHdG levels. Using 1 ml of urine, the limit of quantification was >2.5 nM (2.5 pmol/ml) and the calibration curve was linear in the range 2.5–200 nM. This method was applied to measure 8OHdG in urine samples from 12 healthy subjects. The intra- and inter-day variations were <9%. Urinary 8OHdG levels in spot urine samples from four healthy subjects were also measured for 1 week and, again, the variation was small. The presence of H2O2 in urine did not cause artifactual formation of 8OHdG. Since this assay is simple, rapid, sensitive and reproducible, it seems suitable to be used as a routine methodology for the measurement of urinary excretion of 8OHdG in large population studies.

scholarly journals Cycle and flow trusses in directed networks

2016 ◽  
Vol 3 (11) ◽  
pp. 160270 ◽  
Author(s):  
Taro Takaguchi ◽  
Yuichi Yoshida
Keyword(s):  
Truss Structures ◽  
Directed Network ◽  
Unified Framework ◽  
Directed Networks ◽  
Research Fields ◽  
Wide Range ◽  
Definition Of ◽  
Information Finding ◽  
Empirical Networks ◽  
Module Structures

When we represent real-world systems as networks, the directions of links often convey valuable information. Finding module structures that respect link directions is one of the most important tasks for analysing directed networks. Although many notions of a directed module have been proposed, no consensus has been reached. This lack of consensus results partly because there might exist distinct types of modules in a single directed network, whereas most previous studies focused on an independent criterion for modules. To address this issue, we propose a generic notion of the so-called truss structures in directed networks. Our definition of truss is able to extract two distinct types of trusses, named the cycle truss and the flow truss, from a unified framework. By applying the method for finding trusses to empirical networks obtained from a wide range of research fields, we find that most real networks contain both cycle and flow trusses. In addition, the abundance of (and the overlap between) the two types of trusses may be useful to characterize module structures in a wide variety of empirical networks. Our findings shed light on the importance of simultaneously considering different types of modules in directed networks.

scholarly journals Optimization of Plant Extract Purification Procedure for Rapid Screening Analysis of Sixteen Phenolics by Liquid Chromatography

Separations ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 13
Author(s):  
Petra Ranušová ◽  
Ildikó Matušíková ◽  
Peter Nemeček
Keyword(s):  
Liquid Chromatography ◽  
High Performance ◽  
Solid Phase ◽  
Low Cost ◽  
Sinapic Acid ◽  
Rapid Screening ◽  
Coumaric Acid ◽  
Laboratory Equipment ◽  
Wide Range ◽  
Methoxycinnamic Acid

A solid-phase extraction (SPE) procedure was developed for simultaneous monitoring of sixteen different phenolics of various polarity, quantified by high-performance liquid chromatography (HPLC). The procedure allowed screening the accumulation of intermediates in different metabolic pathways that play a crucial role in plant physiology and/or are beneficial for human health. Metabolites mostly involved in phenylpropanoid, shikimate, and polyketide pathways comprise chlorogenic acid, gentisic acid, vanillic acid, caffeic acid, protocatechuic acid, ferulic acid, rutin, quercetin, epicatechin, gallic acid, sinapic acid, p-coumaric acid, o-coumaric acid, vanillin; two rarely quantified metabolites, 2,5-dimethoxybenzoic acid and 4-methoxycinnamic acid, were included as well. The procedure offered low cost, good overall efficiency, and applicability in laboratories with standard laboratory equipment. SPE recoveries were up to 99.8% at various concentration levels. The method allowed for routine analysis of compounds with a wide range of polarity within a single run, while its applicability was demonstrated for various model plant species (tobacco, wheat, and soybean), as well as different tissue types (shoots and roots).

Determination of Bendiocarb Insecticide by Reverse Flow Injection Analysis Using a Solid-Phase Reactor Containing Micro PbO2, Nano PbO2 and Grafted SiO2 - PbO2 Immobilized

2020 ◽  
Vol 42 (1) ◽  
pp. 31-31
Author(s):  
Malik H Alaloosh Alamri Malik H Alaloosh Alamri ◽  
Sadeem Subhi Abed and Abdulkareem M A Alsammarraie Sadeem Subhi Abed and Abdulkareem M A Alsammarraie
Keyword(s):  
Flow Injection ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Reverse Flow ◽  
Blue Color ◽  
Wide Range ◽  
Solid Phase Reactor ◽  
Grafted Nanoparticles ◽  
Reverse Flow Injection

Bendiocarb (BEN) is an acutely toxic carbamate insecticide which used in public places and agriculture, it is also effective against a wide range of nuisance and disease vector insects. A new rapid and sensitive reverse flow injection spectrophotometric procedure coupled with on-line solid-phase reactor is designed in this article for the determination of BEN in its insecticidal formulations and water samples, by using three different solid-phase reactors containing bulk PbO2 (B-SPR), PbO2 nanoparticles (N-SPR) and grafted nanoparticles of SiO2-PbO2 (G-SPR) immobilized on cellulose acetate matrix (CA). This method of oxidative coupling is based on alkaline hydrolysis of the BEN pesticide, and then coupled with N,N dimethyl-p-phenylenediamine sulphate (DMPD) to give a blue color product which measured at λmax 675 nm. It worth to mentioned that under optimal conditions, Beer’s law is obeyed in the range of 1-175 μg mL-1 for B-SPR and 0.25-70 μg mL-1 of BEN for both N-SPR and G-SPR respectively within limit of detection (LOD) of 0.931, 0.234 and 0.210 μg mL-1 for B-SPR N-SPR and G-SPR respectively. The surface methodology of the solid phase was also investigated by using atomic force microscopy.

Qualitative assessment of air pollution in the working area of energy-intensive materials production by nanoscale aerosols with a solid dispersed phase

2021 ◽  
Vol 61 (12) ◽  
pp. 828-832
Author(s):  
Boris N. Filatov ◽  
Natalya I. Latyshevskaya ◽  
Natalya V. Krylova ◽  
Irina K. Gorkina ◽  
Yulya I. Velikorodnaya ◽  
...  
Keyword(s):  
Air Pollution ◽  
Mass Concentration ◽  
Solid Phase ◽  
Qualitative Assessment ◽  
Dust Particles ◽  
Dispersed Phase ◽  
Forced Circulation ◽  
Aluminum Powders ◽  
Nanoscale Particles ◽  
Wide Range

The presence of grinding, mixing, and fractionation of solid components of formulations leads to the formation of aerosols in the air of the working area with a wide range of dispersion of the solid phase - all this characterizes the organization of technological processes for the production of energy-intensive materials. The study aims to give a qualitative assessment of possible air pollution of the working area of energy-intensive materials production by nanoscale aerosols with a solid dispersed phase. The researchers carried out the sampling of the working area air and flushes from solid horizontal surfaces to produce energy-intensive materials. We carried out the sampling by forced circulation of the test air through the absorption devices of Polezhaev. Scientists used Triton TX-114 solution with a mass concentration of 2.0 mg/dm3 as an absorption medium. The researchers performed flushing from surfaces using cloth tampons moistened with Triton TX-114 solution with a mass concentration of 2.0 mg/dm3. We determined the particle sizes in the samples using NanotracULTRA (Microtrac). Scientists found aluminum and nitrocellulose particles with sizes from 36 to 102 nm in the air of the working area and flushes from horizontal surfaces. The study of the fractional composition of RDX and aluminum powders of the ASD-1 brand showed the presence of nanoscale particles in them. Nanoscale dust particles pollute the air of the working area and solid horizontal surfaces at certain stages of the production of energy-intensive materials. There are nanoscale particles in the composition of powders of some standard components of formulations. Flushes from solid horizontal surfaces are an adequate qualitative indicator of the presence of nanoaerosols in the air of the working area.

scholarly journals Remedial Treatment of Corroded Iron Objects by EnvironmentalAeromonasIsolates

2018 ◽  
Vol 85 (3) ◽  
Author(s):  
Wafa M. Kooli ◽  
Thomas Junier ◽  
Migun Shakya ◽  
Mathilde Monachon ◽  
Karen W. Davenport ◽  
...  
Keyword(s):  
Iron Reduction ◽  
Building Materials ◽  
Solid Phase ◽  
Corrosion Products ◽  
Metal Corrosion ◽  
Economic Losses ◽  
Cytotoxic Activities ◽  
Iron Corrosion ◽  
Pathogenic Potential ◽  
Wide Range

ABSTRACTUsing bacteria to transform reactive corrosion products into stable compounds represents an alternative to traditional methods employed in iron conservation. Two environmentalAeromonasstrains (CA23 and CU5) were used to transform ferric iron corrosion products (goethite and lepidocrocite) into stable ferrous iron-bearing minerals (vivianite and siderite). A genomic and transcriptomic approach was used to analyze the metabolic traits of these strains and to evaluate their pathogenic potential. Although genes involved in solid-phase iron reduction were identified, key genes present in other environmental iron-reducing species are missing from the genome of CU5. Several pathogenicity factors were identified in the genomes of both strains, but none of these was expressed under iron reduction conditions. Additionalin vivotests showed hemolytic and cytotoxic activities for strain CA23 but not for strain CU5. Both strains were easily inactivated using ethanol and heat. Nonetheless, given a lesser potential for a pathogenic lifestyle, CU5 is the most promising candidate for the development of a bio-based iron conservation method stabilizing iron corrosion. Based on all the results, a prototype treatment was established using archaeological items. On those, the conversion of reactive corrosion products and the formation of a homogenous layer of biogenic iron minerals were achieved. This study shows how naturally occurring microorganisms and their metabolic capabilities can be used to develop bio-inspired solutions to the problem of metal corrosion.IMPORTANCEMicrobiology can greatly help in the quest for a sustainable solution to the problem of iron corrosion, which causes important economic losses in a wide range of fields, including the protection of cultural heritage and building materials. Using bacteria to transform reactive and unstable corrosion products into more-stable compounds represents a promising approach. The overall aim of this study was to develop a method for the conservation and restoration of corroded iron items, starting from the isolation of iron-reducing bacteria from natural environments. This resulted in the identification of a suitable candidate (Aeromonassp. strain CU5) that mediates the formation of desirable minerals at the surfaces of the objects. This led to the proof of concept of an application method on real objects.

Sign in / Sign up

Export Citation Format

Share Document