scholarly journals Influence of long chain branching on fiber diameter distribution for polypropylene nonwovens produced by melt blown process

2019 ◽  
Vol 63 (4) ◽  
pp. 519-532 ◽  
Author(s):  
Jiri Drabek ◽  
Martin Zatloukal
2021 ◽  
Vol 36 (4) ◽  
pp. 403-409
Author(s):  
K. Iiba ◽  
W. Takarada ◽  
T. Kikutani

Abstract In the melt blowing process, the molten polymers extruded from nozzles are elongated by high-velocity and high-temperature air flow. In this study, with the aim of stabilizing the melt blowing process for producing nonwoven webs with fine diameter fibers, the effect of the control of polymer rheology by the introduction of either low melt flow rate (MFR) polypropylene (PP) or long chain branched PP (LCB-PP) to regular high MFR PP was investigated. Introduction of low MFR PP into regular PP increased shear viscosity and fibers of larger diameter were produced in the melt blowing process, while introduction of low MFR LCB-PP suppressed the elongational viscosity reduction with the increase of strain rate, and eventually spinning was stabilized. It was found that the blending of an optimum amount of LCB-PP to regular PP caused the stabilization of the melt blowing process. As a result, the formation of nonwoven webs consisting of fine fibers of rather uniform diameter distribution could be achieved.


2002 ◽  
Vol 46 (2) ◽  
pp. 401-426 ◽  
Author(s):  
B. J. Crosby ◽  
M. Mangnus ◽  
W. de Groot ◽  
R. Daniels ◽  
T. C. B. McLeish

2010 ◽  
Vol 115 (6) ◽  
pp. 3645-3650 ◽  
Author(s):  
Sureerut Amnuaypornsri ◽  
Lucksanaporn Tarachiwin ◽  
Jitladda T. Sakdapipanich

2004 ◽  
Vol 44 (5) ◽  
pp. 973-982 ◽  
Author(s):  
A. D. Gotsis ◽  
B. L. F. Zeevenhoven ◽  
A. H. Hogt

Sign in / Sign up

Export Citation Format

Share Document